EN 4700-004:2010
Current
Current
The latest, up-to-date edition.
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
Published date
06-10-2010
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Wording of order
5 Health and safety
6 Technical requirements
This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy wire. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 4700-004. (03/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PN EN 4700-004 : 2011 | Identical |
| UNE-EN 4700-004:2010 | Identical |
| SN EN 4700-004 : 2010 | Identical |
| NEN EN 4700-004 : 2010 | Identical |
| NBN EN 4700-004 : 2010 | Identical |
| NS EN 4700-004 : 2010 | Identical |
| NF EN 4700-004 : 2012 | Identical |
| BS EN 4700-004:2010 | Identical |
| DIN EN 4700-004:2011-05 | Identical |
| UNI EN 4700-004 : 2011 | Identical |
| I.S. EN 4700-004:2010 | Identical |
| BS EN 4500-005:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for steels |
| BS EN 4500-003:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards Specific rules for heat resisting alloys |
| UNI EN 4500-003 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING ALLOYS |
| I.S. EN 2402:2014 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NICR20CO3FE3 - ANNEALED - WIRE - D <= 10 MM |
| UNI EN 2402 : 2014 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NICR20CO3FE3 - ANNEALED - WIRE - D <= 10 MM |
| I.S. EN 2119:2017 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 (X6NICRTIMOV26-15) - SOLUTION TREATED AND PRECIPITATION TREATED -WIRES FOR RIVETS - 2 MM <= D <= 10 MM - R[M] >= 960 MPA |
| BS EN 2402:2014 | Aerospace series. Heat resisting nickel base alloy NiCr20Co3Fe3. Annealed. Wire. D ≤ 10 mm |
| I.S. EN 4500-003:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 003: SPECIFIC RULES FOR HEAT RESISTING ALLOYS |
| I.S. EN 4500-005:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS |
| EN 2119 : 2017 | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa |
| UNI EN 4500-005 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS |
| EN 4500-005:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels |
| EN 2402:2014 | Aerospace series - Heat resisting nickel base alloy NiCr20Co3Fe3 - Annealed - Wire - D ≤ 10 mm |
| EN 4500-003:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| PREN 2002-16 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 16: NON-DESTRUCTIVE TESTING - PENETRANT TESTING |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 10079:2007 | Definition of steel products |
| EN 2950:2008 | Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects |
| TR 2410 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS |
| EN 2032-2 : 1994 | AEROSPACE SERIES - METALLIC MATERIALS - CODING OF METALLURGICAL CONDITION IN DELIVERY CONDITION |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 9649:2016 | Metallic materials — Wire — Reverse torsion test |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| SAE AMS 2750 : 2012 | PYROMETRY |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN 2032-1 : 2001 | AEROSPACE SERIES - METALLIC MATERIALS - PART 1: CONVENTIONAL DESIGNATION |
| EN ISO 3651-1 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - PART 1: AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN NITRIC ACID MEDIUM BY MEASUREMENT OF LOSS IN MASS (HUEY TEST) |
| ISO 3651-1:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| PREN 4259 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 2002-002 : 2005 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 2: TENSILE TESTING AT ELEVATED TEMPERATURE |
| ISO 7802:2013 | Metallic materials — Wire — Wrapping test |
| SAE AMS 2315 : 2013 | DETERMINATION OF DELTA FERRITE CONTENT |
| ISO 7801:1984 | Metallic materials Wire Reverse bend test |
| EN 2002-005 : 2007 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 005: UNINTERRUPTED CREEP AND STRESS-RUPTURE TESTING |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| EN 2002-001:2005 | Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature |
| ISO 7800:2012 | Metallic materials — Wire — Simple torsion test |
| PREN 2951 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS |
| EN 2078:2001 | Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.