EN 50082-1:1997
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry
Superseded date
01-10-2001
Published date
18-08-1997
NO CONTENTS SECTION
This standard for EMC immunity requirements applies to electrical and electronic apparatus intended for use in the residential, commercial and light-industrial environment, as described in clause 5, for which no dedicated product or product-family immunity standard exists. Where a relevant dedicated product or product-family EMC immunity standard exists (EN or ETS) it shall take precedence over all aspects of this generic standard. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No measurements need to be performed at frequencies where no requirements are specified. This standard applies to apparatus intended to be directly connected to a public low-voltage mains network or connected to a dedicated d.c. source which is intended to interface between the apparatus and the low-voltage public mains network. This standard applies also to apparatus which is battery operated or is powered by a non-public but non-industrial low-voltage power distribution system if this apparatus is intended to be used in the locations described in clause 5. Apparatus intended to be connected to an industrial power network and apparatus intended to be operated in an industrial environment as described in EN 50082-2 are covered by that generic standard.
| Committee |
CLC/TC 210
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| AS/NZS 4252.1:1994 | Identical |
| DIN EN 50082-1 : 1997 | Identical |
| VDE 0839-82-1 : 1997 | Identical |
| CEI EN 50082-1 : 2ED 1998 | Identical |
| BS EN 50082-1:1998 | Identical |
| I.S. EN 50082-1:1998 | Identical |
| UNE-EN 50082-1:1998 | Identical |
| NF EN 50082-1 : 1998 | Identical |
| SN EN 50082-1 : 1997 | Identical |
| NBN EN 50082-1 : 1998 | Identical |
| NEN EN 50082-1 : 1997 | Identical |
| ETR 357 : 20001 | |
| BS EN 50207:2001 | Railway applications. Electronic power converters for rolling stock |
| I.S. EN 12919:2000 | WORKPLACE ATMOSPHERES - PUMPS FOR THE SAMPLING OF CHEMICAL AGENTS WITH A VOLUME FLOW RATE OF OVER 5 L/MIN - REQUIREMENTS AND TEST METHODS |
| 05/30133339 DC : DRAFT MAY 2005 | EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| I.S. EN 12445:2000 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - TEST METHODS |
| EG 201 450 : 1.1.1 | GUIDANCE ON THE IDENTIFICATION OF HARMONIZED STANDARDS AND/OR OTHER TECHNICAL SPECIFICATIONS FOR RADIO EQUIPMENT AND TELECOMMUNICATIONS TERMINAL EQUIPMENT (R&TTE) COVERING REQUIREMENTS UNDER ARTICLE 3.1 OF DIRECTIVE 1999/5/EC |
| DIN EN 50173:2000-07 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS |
| 99/241254 DC : DRAFT APR 99 | THERMOMETERS FOR MEASURING THE AIR AND PRODUCT TEMPERATURE FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF CHILLED, FROZEN, DEEP-FROZEN/QUICK-FROZEN FOOD AND ICE CREAM - TESTS, PERFORMANCE, SUITABILITY. |
| 99/711929 DC : DRAFT JUL 1999 | EN 13621 - FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| 98/201910 DC : DRAFT APRIL 1998 | PREN 50297 - PHOTOELECTRIC CONTROL UNITS FOR ROAD AND STREET LIGHTING |
| SCTE 79-1 : 2016 | DOCSIS 2.0 - PART 1: RADIO FREQUENCY INTERFACE |
| BS EN 12453:2001 | Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Requirements |
| ETR 238 : 20001 | |
| DIN EN 12198-1:2008-11 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES |
| EN 50178:1997 | Electronic equipment for use in power installations |
| EN 50256:1998 | Characteristics of DVB receivers |
| EN 12919:1999 | Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods |
| EN 12445:2000 | Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods |
| EN 1232:1997 | Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods |
| EN 12198-1:2000+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
| EN 50207:2000 | Railway applications - Electronic power converters for rolling stock |
| ES 201 488 : 1.1.1 | DATA-OVER-CABLE SERVICE INTERFACE SPECIFICATIONS RADIO FREQUENCY INTERFACE SPECIFICATION |
| ES 202 488-2 : 1.1.1 | ACCESS AND TERMINALS (AT); SECOND GENERATION TRANSMISSION SYSTEMS FOR INTERACTIVE CABLE TELEVISION SERVICES - IP CABLE MODEMS; PART 2: RADIO FREQUENCY INTERFACE SPECIFICATION |
| TR 101 640 : 7.0.0 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+); GSM ELECTRO MAGNETIC COMPATIBILITY (EMC) CONSIDERATIONS |
| ETR 169 : 20001 | SATELLITE EARTH STATIONS AND SYSTEMS (SES); COMMON TECHNICAL REGULATIONS (CTRS) IN THE SATELLITE EARTH STATION EQUIPMENT FIELD |
| 04/30106849 DC : DRAFT MAY 2004 | EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| CSA M14982 : 2000 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| NF ETS 300342-3 : 2001 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ELECTROMAGNETIC COMPATIBILITY (EMC) FOR EUROPEAN DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (GSM 900 MHZ AND DCS 1800 MHZ) - PART 3: BASE STATION RADIO AND ANCILLARY EQUIPMENT AND REPEATERS MEETING PHASE 2 GSM REQUIREMENTS |
| 04/30114100 DC : DRAFT MAY 2004 | PREN 14958 - GRAIN PROCESSING EQUIPMENT - GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS |
| DIN ETS 300456:1996-06 | SATELLITE EARTH STATIONS AND SYSTEMS (SES) - TEST METHODS FOR VERY SMALL APERTURE TERMINALS (VSATS) OPERATING IN THE 11/12/14 GHZ FREQUENCY BANDS |
| DD ENV 12647:1997 | Bar coding. Test specifications for bar code verifiers |
| DIN ETS 300011-1:1998-12 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - PRIMARY RATE USER-NETWORK INTERFACE (UNI) - PART 1: LAYER 1 SPECIFICATION |
| BS EN 12830:1999 | Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Tests, performance and suitability |
| 95/214875 DC : 0 | PREN 50222 - STANDARD FOR THE EVALUATION OF MEASUREMENT RESULTS TAKING MEASUREMENT UNCERTAINTY INTO ACCOUNT |
| BS EN 50178:1998 | Electronic equipment for use in power installations |
| ANSI INCITS 307 : 1997 : R2002 | INFORMATION TECHNOLOGY - SERIAL STORAGE ARCHITECTURE - PHYSICAL LAYER 2 (SSA-PH2) |
| ANSI INCITS 307 : 1997 : R2007 | INFORMATION TECHNOLOGY - SERIAL STORAGE ARCHITECTURE - PHYSICAL LAYER 2 (SSA-PH2) |
| UNI EN 15964 : 2011 | BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| NF ETS 300684 : 1998 | |
| ASTM B 878 : 1997 : R2003 | Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors |
| PREN 15964 : DRAFT 2009 | BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| ISO 14982:1998 | Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria |
| I.S. EN 12198-1:2000 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES |
| I.S. EN ISO 14982:2009 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| VDI/VDE 2185 Blatt 1:2007-09 | Radio based communication in industrial automation |
| VDE 0400-40-1 : 2000 AMD 1 2004 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| NF EN 300385 : 2001 | |
| ETS 300 673 : 20001 | RADIO EQUIPMENT AND SYSTEMS (RES); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR 4/6 GHZ AND 11/12/14 GHZ VERY SMALL APERTURE TERMINAL (VSAT) EQUIPMENT AND 11/12/13/14 GHZ SATELLITE NEWS GATHERING (SNG) |
| 04/30110326 DC : DRAFT APR 2004 | EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
| BS EN 50241-1:1999 | Specification for open path apparatus for the detection of combustible or toxic gases and vapours General requirements and test methods |
| 96/208116 DC : 0 | PREN 50236 - ELECTROMAGNETIC COMPATIBILITY FOR POWER TRANSFORMERS |
| 05/30133297 DC : DRAFT MAY 2005 | EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| PD 6580-2:1995 | Home and building electronic systems. Technical report 1 Guidelines for the professional installation of Twisted Pair cables class 1 |
| BS EN 50136-2-1:1998 | Alarm systems. Alarm transmission systems and equipment General requirements for alarm transmission equipment |
| NF EN 300279 : 2001 | |
| NF EN 50207 : 2004 | RAILWAY APPLICATIONS - ELECTRONIC POWER CONVERTERS FOR ROLLING STOCK |
| EN 300 386-2 : 1.1.3 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); TELECOMMUNICATION NETWORK EQUIPMENT; ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS; PRODUCT FAMILY STANDARD |
| TR 102 937 : 1.1.1 | ECALL COMMUNICATIONS EQUIPMENT; CONFORMANCE TO EU VEHICLE REGULATIONS, R&TTE, EMC & LV DIRECTIVES, AND EU REGULATIONS FOR ECALL IMPLEMENTATION |
| I.S. EN 50256:1998 | CHARACTERISTICS OF DVB RECEIVERS |
| ENV 12647 : DRAFT 1997 | BAR CODING - TEST SPECIFICATIONS FOR BAR CODE VERIFIERS |
| EN 50136-2-1 : 98 AMD 1 2001 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2-1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION EQUIPMENT |
| EN 50241-1 : 99 AMD 1 2004 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| SCTE 23-1 : 2017 | DOCSIS 1.1 - PART 1: RADIO FREQUENCY INTERFACE |
| UNI EN 12198-1 : 2009 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES |
| UNI EN 1760-1 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| UNI EN ISO 14982 : 2009 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| NF ETS 300673 : 1998 | |
| DIN EN 50241-1 : 2000 AMD 1 2004 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 1232:1997 | WORKPLACE ATMOSPHERES - PUMPS FOR PERSONAL SAMPLING OF CHEMICAL AGENTS - REQUIREMENTS AND TEST METHODS |
| ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
| ES 201 488-2 : 1.2.2 | ACCESS AND TERMINALS (AT); DATA OVER CABLE SYSTEMS; PART 2: RADIO FREQUENCY INTERFACE SPECIFICATION |
| 00/708470 DC : DRAFT APR 2000 | PREN 13886 - FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH STIRRER AND/OR MIXER - SAFETY AND HYGIENE |
| BS EN 50256:1998 | Characteristics of DVB receivers |
| BS EN 15964:2011 | Breath alcohol test devices other than single use devices. Requirements and test methods |
| NF ETS 300717 : 2000 | |
| DD ENV 12646:1997 | Bar coding. Test specifications for bar code scanners and decoders |
| BS EN 50173:1996 | Information technology. Generic cabling systems |
| 09/30202737 DC : 0 | BS EN 15964 - BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 15964:2012 | Breath alcohol test devices other than single use devices - Requirements and test methods |
| I.S. ETS 300 158:1993 | SATELLITE EARTH STATIONS (SES); TELEVISION RECEIVE ONLY (TVRO-FSS) SATELLITE EARTH STATIONS OPERATING IN THE 11/12 GHZ FSS BANDS |
| DD ENV 14236:2002 | Ultrasonic domestic gas meters |
| ASTM B 878 : 1997 : R2009 | Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors |
| CEI 214-3/1 : 1999 | TAXI FLEET MANAGEMENT - GENERAL REFERENCE |
| DIN EN ISO 14982:2009-12 | Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
| BS EN 12919:1999 | Workplace atmospheres. Pumps for the sampling of chemical agents with a volume flow rate of over 51/min. Requirements and test methods |
| BS EN 12198-1 : 2000 | SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES |
| 95/214868 DC : 0 | PREN 50178 - ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
| BS EN 12445:2001 | Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Test methods |
| BS EN 45510-8-1:1998 | Guide for the procurement of power station equipment Control and instrumentation |
| BS EN 13485:2001 | Thermometers for measuring the air and product temperature for the trans port, storage and distribution of chilled, frozen,deep-frozen/quick-froz en food and ice cream. Tests, performance, suitability |
| BS EN 1760-1 : 1998 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| ENV 12646 : 1997 | BAR CODING - TEST SPECIFICATIONS FOR BAR CODE SCANNERS AND DECODERS |
| EN 15964:2011 | Breath alcohol test devices other than single use devices - Requirements and test methods |
| ENV 12648 : 1997 | BAR CODING - TEST SPECIFICATIONS FOR BAR CODE PRINTERS |
| EN ISO 14982:2009 | Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 13485:2001 | Thermometers for measuring the air and product temperature for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Tests, performance, suitability |
| ETR 151 : 20001 | EQUIPMENT ENGINEERING (EE); ELECTRO-MAGNETIC COMPATIBILITY (EMC) TESTING OF TELECOMMUNICATION EQUIPMENT ABOVE 1 GHZ |
| ASTM B 878 : 1997 : R2014 | Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors |
| DD ENV 12648:1997 | Bar coding. Test specifications for bar code printers |
| CEI EN 50256 : 1999 | CHARACTERISTICS OF DVB RECEIVERS |
| NF EN 50136-2-1 : 98 AMD 1 2002 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2-1: GENERAL REQUIREMENTS FOR EQUIPMENT USED IN SYSTEMS USING DEDICATED ALARM PATHS |
| BS ISO 4414:1998 | Pneumatic fluid power. General rules relating to systems |
| BS EN 50065-2-1:2003 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments |
| ASTM B 878 : 1997 | Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors |
| 01/203790 DC : DRAFT JUNE 2001 | IEC 62093 ED.1 - BALANCE-OF-SYSTEM COMPONENTS FOR PHOTO-VOLTAIC SYSTEMS - DESIGN QUALIFICATION AND TYPE APPROVAL |
| BS ISO 4413:1998 | Hydraulic fluid power. General rules relating to systems |
| ETR 108 : 20001 | EUROPEAN DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2); GSM ELECTRO MAGNETIC COMPATIBILITY (EMC) CONSIDERATIONS |
| NF ETS 300 329 : 1999 | |
| NF EN 300339 : 2000 | |
| I.S. EN 15964:2011 | BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 50241-1:1999 | SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN ISO 14982:2009 | Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| EN 50065-2-1 : 2003 AMD 1 2005 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-1: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRIAL ENVIRONMENTS |
| EN 50173 : 95 AMD 1 2000 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS |
| I.S. EN 13485:2002 | THERMOMETERS FOR MEASURING THE AIR AND PRODUCT TEMPERATURE FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF CHILLED, FROZEN, DEEP-FROZEN/QUICK-FROZEN FOOD AND ICE-CREAM - TESTS, PERFORMANCE, SUITABILITY |
| IEC 61000-4-8 : 2.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST |
| IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| IEC 61000-4-6 : 4.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.