EN 50553 : 2012 AMD 1 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK
Superseded date
13-02-2020
Published date
12-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Methodology
6 Verification of compliance
Annex A (informative) - Existing standards and background
Annex B (normative) - Determination of compliance for
degraded mode
Annex C (informative) - Passenger & staff area detection
& fire fighting
Annex D (informative) - Example of an approach to CFD
validation
Annex E (informative) - Guidance for a system function
approach
Annex ZZ (informative) - Coverage of Essential
Requirements of EC Directives
Bibliography
Specifies requirements for running capability under fire conditions which are applicable to passenger carrying railway rolling stock.
| Committee |
TC 9X
|
| DevelopmentNote |
Supersedes PREN 50553. (02/2012)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM OVE EN 50553 : 2016 | Identical |
| NEN EN 50553 : 2012 AMD 1 2016 | Identical |
| VDE 0115-553 : 2016 | Identical |
| I.S. EN 50553:2012 | Identical |
| DIN EN 50553 : 2016 | Identical |
| SN EN 50553 : 2012 AMD 1 2016 | Identical |
| BS EN 50553 : 2012 | Identical |
| PN EN 50553 : 2012 AMD 1 2016 | Identical |
| NF EN 50553 : 2012 AMD 1 2017 | Identical |
| NBN EN 50553 : 2012 AMD 1 2016 | Identical |
| AS/RISSB 7529.1 : 2014 | Railway Rolling Stock - Fire Safety Locomotive Rolling Stock |
| AS/RISSB 7529.2 : 2014 | Railway Rolling Stock - Fire Safety Freight Rolling Stock |
| UNE-EN 45545-4:2013 | Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design |
| UNE-EN 16185-1:2015 | Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions |
| CEI UNI EN 45545-4 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| 12/30235292 DC : 0 | BS EN 50343 - RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| BS EN 45545-4:2013 | Railway applications. Fire protection on railway vehicles Fire safety requirements for rolling stock design |
| 14/30270317 DC : 0 | BS EN 14198 - RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS FOR GENERAL OPERATION |
| BS EN 14198 : 2016 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| I.S. EN 16185-1:2014 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF MULTIPLE UNIT TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| CEI EN 50343 : 2015 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| AS/RISSB 7529.3 : 2014 | Railway Rolling Stock - Fire Safety Passenger Rolling Stock |
| I.S. EN 14198:2016 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| PREN 14198 : DRAFT 2014 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS FOR GENERAL OPERATION |
| I.S. EN 45545-4:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| BS EN 50343 : 2014 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| 15/30309997 DC : 0 | BS EN 15663 - RAILWAY APPLICATIONS - VEHICLE REFERENCE MASSES |
| EN 14198:2016 | Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives |
| EN 16185-1:2014 | Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions |
| DIN EN 14198:2017-03 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| BS EN 16185-1:2014 | Railway applications. Braking systems of multiple unit trains Requirements and definitions |
| DIN EN 45545-4:2015-11 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| I.S. EN 50343:2014 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| UNI CEI EN 45545-4 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| DIN EN 14198:2015-01 (Draft) | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| DIN EN 16185-1:2015-03 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF MULTIPLE UNIT TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| EN 45545-4:2013 | Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design |
| EN 50343 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| CEN/TS 45545-4:2009 | Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for railway rolling stock design |
| CEN/TS 45545-1:2009 | Railway applications - Fire protection on railway vehicles - Part 1: General |
| CEN/TS 45545-3:2009 | Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |
| CEN/TS 14972:2011 | Fixed firefighting systems - Watermist systems - Design and installation |
| CEN/TS 45545-6:2009 | Railway applications - Fire protection on railway vehicles - Part 6: Fire control and management systems |
| EN 50200:2015 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| CLC/TS 45545-5:2009 | Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
| CEN/TS 45545-2:2009 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| EN 286-3:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| ISO 13943:2017 | Fire safety — Vocabulary |
| CLC/TS 45545-5:2009 | Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
| EN ISO 15540 : 2001 | SHIPS AND MARINE TECHNOLOGY - FIRE RESISTANCE OF HOSE ASSEMBLIES - TEST METHODS |
| ISO 15540:2016 | Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic compensators — Test methods |
| ISO/TR 9705-2:2001 | Reaction-to-fire tests Full-scale room tests for surface products Part 2: Technical background and guidance |
| EN 286-4:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| EN 50155:2017 | Railway applications - Rolling stock - Electronic equipment |
| EN 3-7:2004+A1:2007 | Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods |
| EN 50362:2003 | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
| EN ISO 13943:2017 | Fire safety - Vocabulary (ISO 13943:2017) |
| CEN/TS 45545-7:2009 | Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations |
| EN 1363-1:2012 | Fire resistance tests - Part 1: General Requirements |
| EN 61034-1:2005/A1:2014 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS (IEC 61034-1:2005/A1:2013) |
| EN 15663:2017 | Railway applications - Vehicle reference masses |
| EN 50216-5 : 2002 AMD 3 2006 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 5: LIQUID LEVEL, PRESSURE AND FLOW INDICATORS, PRESSURE RELIEF DEVICES AND DEHYDRATING BREATHERS |
| IEC 61034-1:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus |
| IEC 60331-3:2009 | Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure |
| EN 403:2004 | Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking |
| IEC 60310:2016 | Railway applications - Traction transformers and inductors on board rolling stock |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.