Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 572-2:2012

Current
Current

The latest, up-to-date edition.

Glass in building - Basic soda lime silicate glass products - Part 2: Float glass
Published date

18-07-2012

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Dimensional requirements
5 Quality requirements
6 Designation
Annex A (normative) - Method for measuring
        spot fault size (including halo)
Bibliography

This European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for float glass, as defined in EN 572-1:2012, for use in building.This European Standard applies only to float glass supplied in jumbo sizes (see Note 1), split sizes (see Note 2) and oversize plates (see Note 3).NOTE 1Jumbo sizes - PLF (plateau largeur de fabrication) - Bandmasse.NOTE 2Split sizes - DLF (dimension largeur de fabrication) - Geteilte Bandmasse.NOTE 3Oversize plates - these are plates where the nominal length, H, is greater than 6 000 mm. These plates are produced to special order.EN 572-8 gives information on float glass in sizes (i.e. supplied and final cut sizes) other than those covered by this European Standard.

Committee
CEN/TC 129
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
UNE-EN 572-2:2005 Identical
NEN EN 572-2 : 2012 Identical
NF EN 572-2 : 2013 Identical
NS EN 572-2 : 2012 Identical
UNI EN 572-2 : 2012 Identical
SANS 50572-2 : 2ED 2006 Identical
DIN EN 572-2:2012-11 Identical
NBN EN 572-2 : 2012 Identical
I.S. EN 572-2:2012 Identical
SN EN 572-2 : 2012 Identical
BS EN 572-2:2012 Identical
PN EN 572-2 : 2012 Identical
UNE-EN 572-2:2012 Identical
UNE EN 572-2 : 2005 Identical
SANS 50572-2:2020 Identical

07/30046996 DC : DRAFT AUG 2007 BS ISO 1288-4 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 4: TESTING OF CHANNEL SHAPED GLASS
14/30313892 DC : 0 BS EN ISO 10140-1 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS
DIN EN 15752-1:2014-10 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
UNI EN 15755-1 : 2015 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND REQUIREMENTS
01/108539 DC : DRAFT NOV 2001 PREN 572-9 - GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS - PART 9: EVALUATION OF CONFORMITY
BS EN 15752-1:2014 Glass in building. Adhesive backed polymeric film Definitions and requirements
11/30240447 DC : 0 BS EN 1863-1 - GLASS IN BUILDING - HEAT STRENGTHENED SODA LIME SILICATE GLASS - PART 1: DEFINITION AND DESCRIPTION
PREN 572-9 : DRAFT 2017 GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS PRODUCTS - PART 9: PRODUCT STANDARD
99/108002 DC : DRAFT OCT 99 PREN 12600 - GLASS IN BUILDING - PENDULUM TEST - IMPACT TEST METHOD FOR FLAT GLASS AND PERFORMANCE REQUIREMENTS (SECOND ENQUIRY)
PREN 12150-1 : DRAFT 2012 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
EN 12150-1:2015 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
ISO 28278-1:2011 Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing
BS EN 1279-1:2004 Glass in building. Insulating glass units Generalities, dimensional tolerances and rules for the system description
NF EN 12758 : 2011 GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES
DIN EN 1096-4:2015-06 (Draft) GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD
I.S. EN 12758:2011 GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES
DIN EN 13022-1:2014-08 GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 1: GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING SYSTEMS FOR SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
DIN EN 572-1:2016-06 GLASS IN BUILDING - BASIC SODA-LIME SILICATE GLASS PRODUCTS - PART 1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
DIN EN 1863-1:2012-02 GLASS IN BUILDING - HEAT STRENGTHENED SODA LIME SILICATE GLASS - PART 1: DEFINITION AND DESCRIPTION
DIN EN 572-8:2016-06 GLASS IN BUILDING - BASIC SODA-LIME SILICATE GLASS PRODUCTS - PART 8: SUPPLIED AND FINAL CUT SIZES
BS EN 12758:2011 Glass in building. Glazing and airborne sound insulation. Product descriptions and determination of properties
BS EN 14179-1:2005 Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glass Definition and description
BS EN 1096-1:2012 Glass in building. Coated glass Definitions and classification
BS EN 12337-2:2004 Glass in building. Chemically strengthed soda lime silicate glass Evaluation of conformity/Product standard
UNE-EN 13022-1:2015 Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
BS EN 357:2004 Glass in building. Fire resistant glazed elements with transparent or translucent glass products. Classification of fire resistance
UNE-EN 1863-1:2012 Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
BS EN 572-8 : 2012 GLASS IN BUILDING - BASIC SODA-LIME SILICATE GLASS PRODUCTS - PART 8: SUPPLIED AND FINAL CUT SIZES
BS EN 572-1 : 2012 GLASS IN BUILDING - BASIC SODALIME SILICATE GLASS PRODUCTS - PART 1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
BS EN 1863-1:2011 Glass in building. Heat strengthened soda lime silicate glass Definition and description
EN 1096-3:2012 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
EN 13022-1:2014 Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
DIN EN 16477-1:2017-07 GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS
EN 12337-2:2004 Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
EN 12758:2011 Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties
EN 12150-2:2004 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 12337-1:2000 Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description
99/100074 DC : DRAFT JAN 1999 PREN 13474-1 - GLASS IN BUILDING - DESIGN OF GLASS PANES - PART 1: GENERAL BASIS OF DESIGN
12/30255284 DC : DRAFT APR 2012 BS EN 1096-4 - GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY - PRODUCT STANDARD
PREN 1863-1 : DRAFT 2011 GLASS IN BUILDING - HEAT STRENGTHENED SODA LIME SILICATE GLASS - PART 1: DEFINITION AND DESCRIPTION
12/30254909 DC : 0 BS EN 12150-1 - GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
S.R. CEN/TS 16165:2016 DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION
DIN EN 12150-1:2015-12 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
I.S. EN 1096-4:2004 GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD
17/30351893 DC : 0 BS EN 17074 - GLASS IN BUILDING - ENVIRONMENTAL PRODUCT DECLARATION - PRODUCT CATEGORY RULES FOR FLAT GLASS PRODUCTS
PREN 12150-2 : DRAFT 2017 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD
I.S. EN 1279-1:2004 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES, DIMENSIONAL TOLERANCES AND RULES FOR THE SYSTEM DESCRIPTION
UNI EN 15752-1 : 2015 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
PREN 14449 : DRAFT 2017 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PRODUCT STANDARD
I.S. EN 1279-2:2002 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 2: LONG TERM TEST METHOD AND REQUIREMENTS FOR MOISTURE PENETRATION
DIN EN 16477-1:2016-07 (Draft) GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS
EN 1096-4:2004 Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
EN 13031-1:2001 GREENHOUSES: DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
I.S. EN 1279-3:2002 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 3: LONG TERM TEST METHOD AND REQUIREMENTS FOR GAS LEAKAGE RATE AND FOR GAS CONCENTRATION TOLERANCES
DIN EN 12337-2:2005-01 Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 12337-2:2004
DIN EN 572-9:2005-01 Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
DIN EN 15434 E : 2010 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
DIN EN 12758:2011-04 GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES
I.S. EN 13022-1:2014 GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 1: GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING SYSTEMS FOR SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
I.S. EN 14179-1:2016 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
I.S. EN 131-2:2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
I.S. EN 1863-1:2011 GLASS IN BUILDING - HEAT STRENGTHENED SODA LIME SILICATE GLASS - PART 1: DEFINITION AND DESCRIPTION
I.S. EN 1096-3:2012 GLASS IN BUILDING - COATED GLASS - PART 3: REQUIREMENTS AND TEST METHODS FOR CLASS C AND D COATINGS
DIN EN 1036-2:2008-05 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY - PRODUCT STANDARD
DIN EN 571-1:1997-03 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 1: GENERAL PRINCIPLES
I.S. EN 572-1:2012 GLASS IN BUILDING - BASIC SODA-LIME SILICATE GLASS PRODUCTS - PART 1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
I.S. EN 357:2004 GLASS IN BUILDING - FIRE RESISTANT GLAZED ELEMENTS WITH TRANSPARENT OR TRANSLUCENT GLASS PRODUCTS - CLASSIFICATION OF FIRE RESISTANCE
DIN EN 1036-1:2008-03 Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods
I.S. EN 572-8:2012 GLASS IN BUILDING - BASIC SODA-LIME SILICATE GLASS PRODUCTS - PART 8: SUPPLIED AND FINAL CUT SIZES
I.S. EN 1096-1:2012 GLASS IN BUILDING - COATED GLASS - PART 1: DEFINITIONS AND CLASSIFICATION
I.S. EN 15434:2006 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
08/30173305 DC : DRAFT JAN 2008 BS EN 15755-1 - GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND DESCRIPTION
03/109956 DC : 0 BS EN 12488 - GLASS IN BUILDING - GLAZING REQUIREMENTS - ASSEMBLY RULES
UNE-EN 15752-1:2015 Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements
I.S. EN 1036:1999 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE
PREN 14179-1 : DRAFT 2014 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
UNE-EN 16477-1:2017 Glass in building - Painted glass for internal use - Part 1: Requirements
00/104442 DC : DRAFT JUNE 2000 PREN 13916 - FIRE RESISTING DOORSETS - REQUIREMENTS AND CLASSIFICATION
14/30261635 DC : 0 BS EN 131-2:2010/A2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
08/30170590 DC : DRAFT JULY 2008 BS EN ISO 12543-1 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 1: DEFINITIONS AND DESCRIPTION OF COMPONENT PARTS
97/107906 DC : DRAFT DEC 1997 PREN 13022-1 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 1: ACTIONS, REQUIREMENTS AND TERMINOLOGY
I.S. EN 16477-1:2016 GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS
I.S. EN 12150-1:2015 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
UNE-EN ISO 10140-1:2016 Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016)
EN 1279-3:2002 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
UNE-EN 12150-1:2016 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
EN 1279-2:2002 Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration
BS EN 12150-1:2015 Glass in building. Thermally toughened soda lime silicate safety glass Definition and description
ISO 20492-1:2008 Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests
I.S. EN 13031-1:2002 GREENHOUSES: DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
UNE-EN 12758:2011 Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties
DIN EN 14179-2:2005-08 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
DIN EN 12150-2:2005-01 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 12150-2:2004
DIN EN 1863-2:2005-01 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 1863-2:2004
DIN EN 1096-3:2012-04 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
BS EN 13022-1:2014 Glass in building. Structural sealant glazing Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
BS EN 572-9:2004 Glass in building. Basic soda lime silicate glass products Evaluation of conformity/Product standard
ISO 10140-1:2016 Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products
UNE-EN 1096-3:2012 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
UNI EN 15434 : 2010 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
UNI EN 1096-3 : 2012 GLASS IN BUILDING - COATED GLASS - PART 3: REQUIREMENTS AND TEST METHODS FOR CLASS C AND D COATINGS
UNI EN 12758 : 2011 GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES
UNI EN 13022-1 : 2014 GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 1: GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING SYSTEMS FOR SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
UNI EN 1096-1 : 2012 Glass in building - Coated glass - Part 1: Definitions and classification
UNI EN 1863-1 : 2012 GLASS IN BUILDING - HEAT STRENGTHENED SODA LIME SILICATE GLASS - PART 1: DEFINITION AND DESCRIPTION
BS EN 16477-1:2016 Glass in building. Painted glass for internal use Requirements
BS EN 1036-1:2007 Glass in building. Mirrors from silver-coated float glass for internal use Definitions, requirements and test methods
14/30310335 DC : 0 BS EN 14179-1 - GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
03/100996 DC : DRAFT MAR 2003 PREN 13022-1 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING SYSTEMS - SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
BS EN 15755-1:2014 Glass in building. Adhesive backed polymeric filmed glass Definitions and requirements
02/100468 DC : DRAFT JAN 2002 PREN 14179-1 - GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
PREN 1096-3 : DRAFT 2011 GLASS IN BUILDING - COATED GLASS - PART 3: REQUIREMENTS AND TEST METHODS FOR CLASS C AND D COATINGS
PREN 14179-2 : DRAFT 2017 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD
I.S. EN 1036-1:2007 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 1: DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 1279-2:2002 Glass in building. Insulating glass units Long term test method and requirements for moisture penetration
I.S. EN 15755-1:2014 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND REQUIREMENTS
BS EN 1096-4:2004 Glass in building. Coated glass Evaluation of conformity/Product standard
PREN 13031-1 : DRAFT 2017 GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
UNE-EN 15755-1:2015 Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and requirements
DIN EN 1288-1:2000-09 GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 1: FUNDAMENTALS OF TESTING GLASS
DIN EN 13031-1:2003-09 GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
BS EN 12337-1:2000 Glass in building. Chemically strengthened soda lime silicate glass Definition and description
BS EN 1863-2:2004 Glass in building. Heat strengthened soda lime silicate glass Evaluation of conformity. Product standard
UNE-EN 1096-1:2012 Glass in building - Coated glass - Part 1: Definitions and classification
BS EN 1036:1999 Glass in building. Mirrors from silver-coated float glass for internal use
BS EN 1288-1:2000 Glass in building. Determination of the bending strength of glass Fundamentals of testing glass
BS EN 131-2 : 2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
BS EN 15434 : 2006 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
DIN EN 15434:2010-07 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010)
BS EN 13031-1:2001 Greenhouses. Design and construction Commercial production greenhouses
EN 1863-1:2011 Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
EN 15434:2006+A1:2010 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
EN 572-8:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes
EN 357:2004 Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance
EN 14179-1:2016 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description
EN 15752-1 : 2014 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
EN 572-9:2004 Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
EN 15755-1 : 2014 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND REQUIREMENTS
EN 1863-2:2004 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
EN 16477-1:2016 Glass in building - Painted glass for internal use - Part 1: Requirements
EN 14179-2:2005 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 572-1:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
PREN 1096-1 : DRAFT 2011 GLASS IN BUILDING - COATED GLASS - PART 1: DEFINITIONS AND CLASSIFICATION
ISO 13640:1999 Building construction Jointing products Specifications for test substrates
11/30244801 DC : 0 BS EN 1096-3 - GLASS IN BUILDING - COATED GLASS - PART 3: REQUIREMENTS AND TEST METHODS FOR CLASS C AND D COATINGS
EN 1279-1:2004/AC:2006 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES, DIMENSIONAL TOLERANCES AND RULES FOR THE SYSTEM DESCRIPTION
17/30357034 DC : 0 BS EN 12150-1 AMENDMENT 1 - GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
DIN EN 15755-1:2014-10 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND REQUIREMENTS
12/30266556 DC : 0 BS EN 16477-1 - GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS
17/30359844 DC : 0 BS EN 572-9 - GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS PRODUCTS - PART 9: PRODUCT STANDARD
I.S. EN 15752-1:2014 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
BS EN 1279-3:2002 Glass in building. Insulating glass units Long term test method and requirements for gas leakage rate and for gas concentration tolerances
03/100997 DC : DRAFT MAR 2003 BS EN 13022-2 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: PRODUCT STANDARD FOR ULTRA-VIOLET RESISTANT SEALANT AND STRUCTURAL SEALANT
08/30172148 DC : DRAFT MAY 2008 BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
11/30244795 DC : 0 BS EN 1096-1 - GLASS IN BUILDING - COATED GLASS - PART 1: DEFINITIONS AND CLASSIFICATION
DIN EN 16477-1 E : 2017 GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS
I.S. EN ISO 10140-1:2016 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO/DIS 10140-1:2014)
12/30266553 DC : 0 BS EN 16477-2 - GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY
07/30046980 DC : DRAFT AUG 2007 BS ISO 1288-1 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 1: FUNDAMENTALS OF TESTING GLASS
EN ISO 10140-1:2016 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO 10140-1:2016)
08/30170610 DC : DRAFT OCT 2008 BS EN ISO 12543-5 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 5: DIMENSIONS AND EDGE FINISHING
BS ISO 13640:1999 Building construction. Jointing products. Specifications for test substrates
ISO 20492-2:2008 Glass in buildings - Insulating glass — Part 2: Chemical fogging tests
17/30354665 DC : 0 BS EN 13031-1 - GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
DIN EN 1279-1:2015-08 (Draft) GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES, DIMENSIONAL TOLERANCES AND RULES FOR THE SYSTEM DESCRIPTION
DIN EN 1096-1:2012-04 Glass in building - Coated glass - Part 1: Definitions and classification
BS EN 1096-3:2012 Glass in building. Coated glass Requirements and test methods for class C and D coatings
BS EN 12600:2002 Glass in building. Pendulum test. Impact test method and classification for flat glass
BS EN 1036-2:2008 Glass in building. Mirrors from silver-coated float glass for internal use Evaluation of conformity; product standard
BS EN 12150-2:2004 Glass in building. Thermally toughened soda lime silicate safety glass Evaluation of conformity/Product standard
BS EN 14179-2:2005 Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glass Evaluation of conformity/product standard
EN 1036 : 1999 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE
CEN/TS 16165:2016 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
EN 1036-2:2008 Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard
EN 1096-1:2012 Glass in building - Coated glass - Part 1: Definitions and classification
EN 1036-1:2007 Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods
EN 12600:2002 Glass in building - Pendulum test - Impact test method and classification for flat glass
DIN EN 1279-3:2003-05 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 3: LONG TERM TEST METHOD AND REQUIREMENTS FOR GAS LEAKAGE RATE AND FOR GAS CONCENTRATION TOLERANCES
DIN EN 357:2005-02 GLASS IN BUILDING - FIRE-RESISTANT GLAZED ELEMENTS WITH TRANSPARENT OR TRANSLUCENT GLASS PRODUCTS - CLASSIFICATION OF FIRE RESISTANCE
EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
EN 131-2:2010+A2:2017 Ladders - Part 2: Requirements, testing, marking
UNE-EN 572-1:2012 Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
UNE-EN 15434:2007 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
UNE-EN 572-8:2013 Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes

EN 572-1:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
EN 572-8:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more