EN 573-2:1994
Current
Current
The latest, up-to-date edition.
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system
Published date
30-08-1994
Publisher
Cooperating organizations
National foreword
Foreword
1. Scope
2. Normative references
3. Basis of coding
4. Rules for the coded designation of wrought
unalloyed aluminium
5. Rules for the coded designation of wrought
aluminium alloys
6. Special use of grades of wrought aluminium
and aluminium alloys
7. Alloys produced from high purity aluminium
Annex A (normative) International chemical symbols
National annexes
NA. (informative) Committees responsible
NB. (informative) Cross-reference
This Part of EN 573 specifies a code of designation applicable to aluminium and aluminium alloys as specified in the relevant European Standards. It is a descriptive code based primarily on chemical symbols. The designations in accordance with this Part of EN 573 are intended primarily as a supplement to the four figure designation described in EN 573-1. This standard applies to wrought products and to ingots intended to be wrought.
| Committee |
CEN/TC 132
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN 286-1 : 1998 AMD 2 2006 | Identical |
| NBN EN 573-2 : 1995 | Identical |
| NEN EN 573-2 : 1994 | Identical |
| NS EN 573-2 : 1ED 1994 | Identical |
| I.S. EN 573-2:1995 | Identical |
| PN EN 573-2 : 1997 | Identical |
| SN EN 573-2 : 1995 | Identical |
| UNI EN 573-2 : 1996 | Identical |
| UNE-EN 573-2:1995 | Identical |
| BS EN 573-2:1995 | Identical |
| DIN EN 573-2:1994-12 | Identical |
| NF EN 573-2 : 1994 | Identical |
| UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| PD CEN/TS 16811-3:2015 | Winter maintenance equipment. De-icing agents Other solid and liquid de-icing agents. Requirements and test methods |
| BS EN ISO 27874:2008 | Metallic coatings. Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes. Specification and test methods |
| DD ENV 1999-1.1 : DRAFT DEC 2000 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 101: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| I.S. EN 16282-5:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| I.S. EN ISO 27874:2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| UNE-EN ISO 2081:2010 | Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2008) |
| BS EN ISO 2081:2018 | Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| ONORM EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN ISO 2081:2016-04 (Draft) | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| I.S. EN 573-3:2013 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
| BS EN 487:2009 | Aluminium and aluminium alloys. Rolling ingots. Specifications |
| EN 12487:2007/AC:2008 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
| CEN/TS 16811-3:2015 | Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08 | WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| PREN 16282-5 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| I.S. EN ISO 2081:2018 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL (ISO 2081:2018) |
| PREN 4632-002 : 200P1 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
| ISO/TR 17671-4:2002 | Welding Recommendations for welding of metallic materials Part 4: Arc welding of aluminium and aluminium alloys |
| NF EN 4632-002 : 2008 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
| DIN EN 12487:2007-07 | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| I.S. EN 486:2009 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUSION INGOTS - SPECIFICATIONS |
| DIN EN 573-4:2004-05 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 4: FORMS OF PRODUCTS |
| I.S. EN 12487:2007 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
| DIN EN ISO 27874:2009-01 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| I.S. EN 487:2009 | ALUMINIUM AND ALUMINIUM ALLOYS - ROLLING INGOTS - SPECIFICATIONS |
| 11/30244204 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| BS EN 16282-5:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air duct. Design and dimensioning |
| 14/30303753 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| CEN ISO/TR 20172:2009 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
| 08/30186451 DC : DRAFT OCT 2008 | BS EN 573-3 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
| EN ISO 2081:2018 | Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2018) |
| 04/30125241 DC : DRAFT NOV 2004 | EN 15085-4 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 4: PRODUCTION REQUIREMENTS |
| PD CEN ISO/TR 20172:2009 | Welding. Grouping systems for materials. European materials |
| ISO 2081:2018 | Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| DIN EN 573-3:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
| DIN EN 486:2009-11 | Aluminium and aluminium alloys - Extrusion ingots - Specifications |
| UNI EN 12487 : 2007 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
| UNI EN 487 : 2009 | ALUMINIUM AND ALUMINIUM ALLOYS - ROLLING INGOTS - SPECIFICATIONS |
| UNI EN 573-3 : 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
| EN 1011-4:2000/A1:2003 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| EN ISO 27874:2008 | Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008) |
| UNI EN 486 : 2009 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUSION INGOTS - SPECIFICATIONS |
| PREN 485-2 : DRAFT 99 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| 16/30329239 DC : 0 | BS EN ISO 2081 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| 05/30133060 DC : 0 | EN 1090-3 - EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| I.S. EN 573-4:2004 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - FORMS OF PRODUCTS |
| BS EN 4632-002:2008 | Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials Homogeneous assemblies aluminium and aluminium alloys |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| S.R. CEN ISO TR 20172:2009 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| I.S. ENV 1999-1-1:1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| BS EN 12487:2007 | Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| BS EN 573-4:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Forms of products |
| UNE-EN 486:2010 | Aluminium and aluminium alloys - Extrusion ingots - Specifications |
| UNE-EN 573-3:2014 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| UNE-EN 487:2010 | Aluminium and aluminium alloys - Rolling ingots - Specifications |
| BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
| EN 486:2009 | Aluminium and aluminium alloys - Extrusion ingots - Specifications |
| EN 16282-5:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct; Design and dimensioning |
| EN 573-4:2004 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products |
| EN 4632-002:2008 | Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys |
| EN 487:2009 | Aluminium and aluminium alloys - Rolling ingots - Specifications |
| ENV 1999-1-1 : 1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS |
| UNI EN ISO 27874 : 2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| 99/710776 DC : DRAFT JULY 1999 | PREN 485-2 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| S.R. CEN ISO/TR 20172:2021 | Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021) |
| PD 6588:1996 | Welding. Guidelines for a grouping system for welding purposes |
| S.R. CEN/TS 16811-3:2015 | WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| I.S. CEN ISO TR 20172:2006 | WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS |
| UNI EN ISO 2081 : 2009 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| UNE-EN ISO 27874:2010 | Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008) |
| I.S. EN 4632-002:2008 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS |
| ISO 27874:2008 | Metallic and other inorganic coatings — Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes — Specification and test methods |
| BS EN 486:2009 | Aluminium and aluminium alloys. Extrusion ingots. Specifications |
| BS EN 1011-4:2000 | Welding. Recommendations for welding of metallic materials Arc welding of aluminium and aluminium alloys |
| ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
| DIN EN ISO 2081:2009-05 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08 | WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| DIN EN 487:2009-11 | Aluminium and aluminium alloys - Rolling ingots - Specifications |
| ISO 209-1:1989 | Wrought aluminium and aluminium alloys Chemical composition and forms of products Part 1: Chemical composition |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN 573-1:2004 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.