EN 60038 : 2011
Current
Current
The latest, up-to-date edition.
CENELEC STANDARD VOLTAGES (IEC 60038:2009, MODIFIED)
Published date
07-10-2011
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Standard voltages
Annex ZB (informative) - A-deviations
Bibliography
Defines standard voltage values, which are intended to serve as preferential values for the nominal voltage of electrical supply systems, and as reference values for equipment and system design.
| Committee |
TC 8X
|
| DevelopmentNote |
Supersedes HD 472. (10/2011)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| VDE 0175-1 : 2012 | Identical |
| I.S. EN 60038:2011 | Identical |
| CEI EN 60038 : 2012 | Identical |
| NEN EN IEC 60038 : 2011 | Identical |
| BS EN 60038:2011 | Identical |
| NF EN 60038 : 2011 | Identical |
| NBN EN 60038 : 2011 | Identical |
| DIN EN 60038 : 2012 | Identical |
| SN EN 60038 : 2011 | Identical |
| PN EN 60038 : 2012 | Identical |
| UNE-EN 60038:2012 | Identical |
| IEC 60038:2009 | Identical |
| I.S. EN 12098-5:2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| BS EN 60601-1-11:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
| BS EN 61800-9-2:2017 | Adjustable speed electrical power drive systems Ecodesign for power drive systems, motor starters, power electronics and their driven applications. Energy efficiency indicators for power drive systems and motor starters |
| UNE-EN 50341-1:2017 | Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications |
| I.S. EN 60358-1:2012 | COUPLING CAPACITORS AND CAPACITOR DIVIDERS - PART 1: GENERAL RULES (IEC 60358-1:2012 (EQV)) |
| BS EN 62488-2:2017 | Power line communication systems for power utility applications Analogue power line carrier terminals or APLC |
| 15/30331522 DC : 0 | BS EN 12098-1 - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| CLC/TS 62603-1:2014 | Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications |
| S.R. HD 60364-5-534:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - ISOLATION, SWITCHING AND CONTROL - CLAUSE 534: DEVICES FOR PROTECTION AGAINST TRANSIENT OVERVOLTAGES |
| I.S. EN 61810-1:2015 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| BS EN 61481-2:2014 | Live working. Phase comparators Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
| S.R. CLC/TR 50422:2013 | GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160 |
| HD 60364-7-708:2017 | Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations |
| 15/30331510 DC : 0 | BS EN 12098-3 - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| I.S. EN 61869-5:2011 | INSTRUMENT TRANSFORMERS - PART 5: ADDITIONAL REQUIREMENTS FOR CAPACITOR VOLTAGE TRANSFORMERS (IEC 61869-5:2011) |
| S.R. HD 60364-7-708:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-708: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVAN PARKS, CAMPING PARKS AND SIMILAR LOCATIONS |
| BS EN 60601-1-12:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
| CEI EN 62488-2 : 1ED 2018 | POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
| CEI EN 61534-1 : 2012 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS EN 60065 : 2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED) |
| UNE-EN 61534-1:2011 | Powertrack systems -- Part 1: General requirements |
| BS EN 12098-1:2017 | Energy Performance of Buildings. Controls for heating systems Control equipment for hot water heating systems. Modules M3-5, 6, 7, 8 |
| S.R. HD 60364-5-557:2013 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS |
| EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| I.S. EN 61000-4-25:2002 | ELECTROMAGNETIC COMPATIBILITY (EMC) - TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001 (EQV)) |
| CEI EN 61000-3-12 : 2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE |
| EN 61800-9-2:2017 | Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters |
| I.S. EN 16479:2014 | WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER |
| EN 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
| I.S. EN IEC 63044-3:2018 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS |
| I.S. EN 60137:2017 | INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V |
| BS EN 50341-1:2012 | Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications |
| EN IEC 61938:2018 | Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability |
| I.S. EN 62488-2:2017 | POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
| UNE-EN 16479:2014 | Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water |
| EN 60137:2017 | Insulated bushings for alternating voltages above 1 000 V |
| UNE-EN 61140:2017 | Protection against electric shock - Common aspects for installation and equipment |
| EN 61400-2:2014 | Wind turbines - Part 2: Small wind turbines |
| EN 61869-4:2014/AC:2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS (IEC 61869-4:2013) |
| EN 60909-0:2016 | Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 61000-3-12:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011) |
| EN 60034-30-1:2014 | Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) |
| HD 60364-5-534:2016 | Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages |
| EN 61869-3 : 2011 | INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS (IEC 61869-3:2011) |
| HD 60364-5-557:2013/A11:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS |
| BS EN 60358-1:2012 | Coupling capacitors and capacitor dividers General rules |
| BS EN 50588-1:2017 | Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV General requirements |
| EN 61851-21-1:2017/AC:2017-11 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY (IEC 61851-21-1:2017) |
| CLC/TR 50422:2013 | GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160 |
| EN 61800-2:2015 | Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems |
| EN IEC 61058-1:2018 | Switches for appliances - Part 1: General requirements |
| BS EN 61534-1 : 2011 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS EN 62756-1:2015 | Digital load side transmission lighting control Basic requirements |
| BS EN 61869-4:2014 | Instrument transformers Additional requirements for combined transformers |
| BS EN IEC 63044-3:2018 | Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Electrical safety requirements |
| I.S. EN 50628:2016 | ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
| CEI EN 62689-1 : 1ED 2017 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| DIN EN 12977-5:2016-08 (Draft) | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
| DIN EN 15500-1:2016-01 (Draft) | ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5 |
| CEI EN 61810-1 : 2016 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| CEI EN 61869-4 : 2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS |
| UNE-EN 61000-3-12:2012 | Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and |
| BS EN 60137:2017 | Insulated bushings for alternating voltages above 1000 V |
| CEI EN 61800-9-2 : 1ED 2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
| I.S. EN 50341-1:2012 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
| 17/30356400 DC : 0 | BS EN 17116-4 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 4: WASHER-EXTRACTORS |
| EN IEC 62909-1:2018 | Bi-directional grid-connected power converters - Part 1: General requirements |
| CEI EN 62756-1 : 2016 | DIGITAL LOAD SIDE TRANSMISSION LIGHTING CONTROL - PART 1: BASIC REQUIREMENTS |
| EN 50341-1:2012 | Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications |
| EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
| EN 302 099 : 2.1.1 | ENVIRONMENTAL ENGINEERING (EE); POWERING OF EQUIPMENT IN ACCESS NETWORK |
| VDI 3805 Blatt 24:2017-02 (Draft) | Product data exchange in the building services - Actuators used in building services |
| BS EN 61851-21-1:2017 | Electric vehicle conductive charging system Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply |
| 17/30356406 DC : 0 | BS EN 17116-2 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS |
| UNE-EN 61008-1:2013 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules |
| BS EN 61000-4-25 : 2002 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS |
| 16/30342855 DC : 0 | BS EN 17038-2 - PUMPS - METHODS OF QUALIFICATION AND VERIFICATION OF THE ENERGY EFFICIENCY INDEX FOR ROTODYNAMIC PUMP UNITS - PART 2: TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) OF SINGLE PUMP UNITS |
| PREN 12098-3 : DRAFT 2015 | CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| BS EN 16479:2014 | Water quality. Performance requirements and conformity test procedures for water monitoring equipment. Automated sampling devices (samplers) for water and waste water |
| 11/30246864 DC : 0 | BS EN 12098-3 - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS |
| UNE-EN 61938:2014 | Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability |
| PD CLC/TS 62603-1:2014 | Industrial process control systems. Guideline for evaluating process control systems Specifications |
| I.S. EN 50588-1:2017 | MEDIUM POWER TRANSFORMERS 50 HZ, WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61008-1:2012&A1:2014/ac&A2:2014...A12:2017 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
| I.S. EN 60034-30-1:2014 | ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE) |
| 15/30331519 DC : 0 | BS EN 15500-1 - CONTROL FOR HEATING, VENTILATING AND AIR-CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5 |
| BS EN 61869-3:2011 | Instrument transformers Additional requirements for inductive voltage transformers |
| 13/30251809 DC : 0 | BS EN 50171 - CENTRAL SAFETY POWER SUPPLY SYSTEMS |
| UNE-EN 61400-2:2015 | Wind turbines - Part 2: Small wind turbines |
| BS EN 60034-30-1:2014 | Rotating electrical machines Efficiency classes of line operated AC motors (IE code) |
| 15/30331525 DC : 0 | BS EN 12098-5 - CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| PREN 12098-1 : DRAFT 2015 | CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| I.S. EN 12098-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| 17/30325894 DC : 0 | BS EN 17075 - WATER QUALITY - GENERAL REQUIREMENTS AND PERFORMANCE TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - MEASURING DEVICES |
| BS EN 61008-1 : 2012 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED) |
| EN 50588-1:2017 | Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements |
| PD CLC/TR 50422:2013 | Guide for the application of the European Standard EN 50160 |
| BS EN 62271-1:2017 | High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear |
| I.S. EN IEC 62909-1:2018 | BI-DIRECTIONAL GRID-CONNECTED POWER CONVERTERS - PART 1: GENERAL REQUIREMENTS |
| UNI EN 12977-5 : 2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
| EN 12098-1:2017 | Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8 |
| UNE-HD 60364-4-443:2016 | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching |
| CEI EN 50341-1 : 2013 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS |
| EN IEC 63044-3:2018 | Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements |
| I.S. EN 61400-2:2014 | WIND TURBINES - PART 2: SMALL WIND TURBINES |
| EN 15500-1:2017 | Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5 |
| UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| EN 60601-1-12:2015 | Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
| UNI EN 12098-1 : 2013 | CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS |
| UNI EN 12098-3 : 2013 | CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS |
| UNE-EN 61869-5:2012 | Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers |
| PREN 12098-5 : DRAFT 2015 | CONTROLS FOR HEATING SYSTEMS - PART 5: START-STOP SCHEDULERS FOR HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| PREN 13487 : DRAFT 2017 | HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT |
| DIN EN 16479 E : 2014 | WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER |
| I.S. EN 62756-1:2015 | DIGITAL LOAD SIDE TRANSMISSION LIGHTING CONTROL - PART 1: BASIC REQUIREMENTS |
| EN 61008-1:2012/A12:2017 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED) |
| CEI EN 62244 : 2012 | RADIATION PROTECTION INSTRUMENTATION - INSTALLED RADIATION MONITORS FOR THE DETECTION OF RADIOACTIVE AND SPECIAL NUCLEAR MATERIALS AT NATIONAL BORDERS |
| CEI CLC/TR 50422 : 2015 | GUIDE FOR THE APPLICATION OF THE EUROPEAN STANDARD EN 50160 |
| BS EN 61869-5:2011 | Instrument transformers Additional requirements for capacitor voltage transformers |
| BS EN 15500-1:2017 | Energy Performance of Buildings. Control for heating, ventilating and air conditioning applications Electronic individual zone control equipment. Modules M3-5, M4-5, M5-5 |
| BS EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements |
| EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements |
| CEI EN 61869-3 : 2012 | INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS |
| 14/30316181 DC : 0 | BS EN 50628 - ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
| UNE-EN 61869-4:2017 | Instrument transformers - Part 4: Additional requirements for combined transformers |
| I.S. EN 61869-3:2011 | INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS (IEC 61869-3:2011) |
| BS EN 61000-3-12:2011 | Electromagnetic compatibility (EMC) Limits. Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase |
| UNE-EN 61869-3:2012 | Instrument transformers - Part 3: Additional requirements for inductive voltage transformers |
| 13/30280187 DC : 0 | BS EN 50598-2 - ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
| UNE-EN 60065:2015 | Audio, video and similar electronic apparatus - Safety requirements |
| PREN 17038-3 : DRAFT 2017 | PUMPS - ROTODYNAMIC PUMPS - ENERGY EFFICIENCY INDEX - METHODS OF QUALIFICATION AND VERIFICATION - PART 3: TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) OF BOOSTER SETS |
| PREN 50171 : DRAFT 2013 | CENTRAL SAFETY POWER SUPPLY SYSTEMS |
| I.S. EN 61140:2016 | PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT |
| BS EN 60909-0:2016 | Short-circuit currents in three-phase a.c. systems Calculation of currents |
| CEI EN 61938 : 2014 | MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY |
| PREN 50598-2 : DRAFT 2013 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 2: ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
| DIN EN 12098-1:2016-01 (Draft) | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| BS EN 61810-1:2015 | Electromechanical elementary relays General and safety requirements |
| I.S. EN 62271-1:2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR |
| I.S. EN IEC 61938:2018 | MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY |
| I.S. EN 61869-4:2014 | INSTRUMENT TRANSFORMERS - PART 4: ADDITIONAL REQUIREMENTS FOR COMBINED TRANSFORMERS |
| I.S. EN 60065:2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| EN 61810-1:2015/AC:2018-04 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS (IEC 61810-1:2015/COR1:2018) |
| EN 62488-2:2017 | Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC |
| I.S. EN 15500-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5 |
| I.S. EN 62689-1:2016 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| I.S. EN 61851-21-1:2017 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY |
| PREN 50628 : DRAFT 2014 | ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES |
| BS EN 12977-5:2012 | Thermal solar systems and components. Custom built systems Performance test methods for control equipment |
| 17/30367208 DC : 0 | BS EN 17038-3 - PUMPS - ROTODYNAMIC PUMPS - ENERGY EFFICIENCY INDEX - METHODS OF QUALIFICATION AND VERIFICATION - PART 3: TESTING AND CALCULATION OF ENERGY EFFICIENCY INDEX (EEI) OF BOOSTER SETS |
| 17/30361327 DC : 0 | BS EN 13487 - HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT |
| EN 12977-5:2018 | Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment |
| EN 12098-5:2017 | Energy Performance of Buildings - Controls for heating systems - Part 5: Start-stop schedulers for heating systems - Modules M3-5,6,7,8 |
| I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60909-0:2016 | SHORT-CIRCUIT CURRENTS IN THREE-PHASE A.C. SYSTEMS - PART 0: CALCULATION OF CURRENTS |
| EN 60358-1:2012 | COUPLING CAPACITORS AND CAPACITOR DIVIDERS - PART 1: GENERAL RULES (IEC 60358-1:2012) |
| UNE-HD 62640:2016 | Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses |
| EN 60669-1:2018 | Switches for household and similar fixed electrical installations - Part 1: General requirements |
| UNE-HD 60364-5-534:2016 | Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages |
| DIN EN 12098-1:2013-10 | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| BS EN 61140 : 2002 | PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT |
| EN 61000-4-25 : 2002 AMD 1 2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001/A1:2012) |
| EN 16479:2014 | Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water |
| 17/30356403 DC : 0 | BS EN 17116-3 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 3: CONTINUOUS TUNNEL WASHER |
| BS EN 61800-2:2015 | Adjustable speed electrical power drive systems General requirements. Rating specifications for low voltage adjustable speed a.c. power drive systems |
| TS 102 121 : 1.3.1 | ENVIRONMENTAL ENGINEERING (EE); POWER DISTRIBUTION TO TELECOMMUNICATIONS AND DATACOM (ICT) EQUIPMENT |
| CEI EN 60034-30-1 : 2015 | ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE) |
| EN 12098-3:2017 | Energy Performance of Buildings - Controls for heating systems - Part 3: Control equipment for electrical heating systems - Modules M3-5,6,7,8 |
| I.S. EN 12977-5:2012 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
| BS EN 60398:2015 | Installations for electroheating and electromagnetic processing. General performance test methods |
| 11/30235383 DC : 0 | BS EN 12098-1 - CONTROLS FOR HEATING SYSTEMS - PART 1: CONTROL EQUIPMENT FOR HOT WATER HEATING SYSTEMS |
| S.R. CLC/TS 62603-1:2014 | INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS |
| PREN 17116-2 : DRAFT 2017 | SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS |
| DIN EN 16479:2014-09 | WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER |
| BS EN 12098-3:2013 | Controls for heating systems Control equipment for electrical heating systems |
| BS EN 12098-5:2017 | Energy Performance of Buildings. Controls for heating systems Start-stop schedulers for heating systems. Modules M3-5,6,7,8 |
| CEI EN 61869-5 : 2012 | INSTRUMENT TRANSFORMERS - PART 5: ADDITIONAL REQUIREMENTS FOR CAPACITOR VOLTAGE TRANSFORMERS |
| BS EN 61938:2013 | Multimedia systems. Guide to the recommended characteristics of analogue interfaces to achieve interoperability |
| I.S. EN 12098-3:2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS - MODULES M3-5, 6, 7, 8 |
| I.S. EN 61000-3-12:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011 (EQV)) |
| I.S. EN 61800-9-2:2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
| DIN EN 15500-1 E : 2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5 |
| EN 60601-1-11:2015 | Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
| UNE-HD 60364-7-708:2018 | Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations |
| I.S. EN 61800-2:2015 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED A.C. POWER DRIVE SYSTEMS |
| I.S. EN 61938:2013 | MULTIMEDIA SYSTEMS - GUIDE TO THE RECOMMENDED CHARACTERISTICS OF ANALOGUE INTERFACES TO ACHIEVE INTEROPERABILITY (IEC 61938:2013 (EQV)) |
| UNE-EN 61439-1:2012 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| BS EN 50628:2016 | Erection of electrical installations in underground mines |
| BS EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies General rules |
| BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
| EN 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| EN 61481-2:2014 | Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
| DIN EN 12977-5:2012-06 | THERMAL SOLAR SYSTEMS AND COMPONENTS - CUSTOM BUILT SYSTEMS - PART 5: PERFORMANCE TEST METHODS FOR CONTROL EQUIPMENT |
| EN 61869-5:2011 | Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers |
| EN 60398:2015 | Installations for electroheating and electromagnetic processing - General performance test methods |
| EN 50628:2016 | Erection of electrical installations in underground mines |
| EN 62756-1:2015 | Digital load side transmission lighting control (DLT) - Part 1: Basic requirements |
| UNE-HD 60364-5-557:2014 | Low-voltage electrical installations - Part 5-557: Selection and erection of electrical equipment - Auxiliary circuits |
| EN 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
| IEC 60050-601:1985 | International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General |
| IEC 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| IEC 60364-5-52:2009 | Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.