EN 60269-1:2007/A2:2014
Current
Current
The latest, up-to-date edition.
LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014)
Amendment of
Published date
05-09-2014
FOREWORD
INTRODUCTION
1 General
2 Terms and definitions
3 Conditions for operation in service
4 Classification
5 Characteristics of fuses
6 Markings
7 Standard conditions for construction
8 Tests
Annex A (informative) - Measurement of short-circuit
power factor
Annex B (informative) - Calculation of pre-arcing I[2]t
values for 'gG', 'gM', 'gD' and
'gN' fuse-links and calculation
of operating I[2]t values at
reduced voltage
Annex C (informative) - Calculation of cut-off current-time
characteristics
Annex D (informative) - Effect of change of ambient
temperature and surroundings on
the performance of fuse-links
BIBLIOGRAPHY
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
Pertains to fuses incorporating enclosed current-limiting fuse-links with rated breaking capacities of not less than 6 kA, intended for protecting power-frequency a.c. circuits of nominal voltages not exceeding 1000 V or d.c. circuits of nominal voltages not exceeding 1500 V.
| Committee |
SR 32B
|
| DevelopmentNote |
Partially supersedes EN 60269-2. (05/2007) Supersedes EN 60269-3. (06/2017)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| VDE 0636-10 : 2005 | Identical |
| DIN VDE 0636-10 : 1992 | Identical |
| CEI EN 60269-1/A1 : 2010 | Identical |
| NEN EN IEC 60269-1 : 2007 AMD 2 2014 | Identical |
| PN EN 60269-1 : 2010 AMD 2 2015 | Identical |
| SN EN 60269-1 : 1998 | Identical |
| BS EN 60269-1 : 2007 | Identical |
| UNE 21103-1:1991 | Identical |
| DIN EN 60269-1 : 2015 | Identical |
| NBN EN 60269-1 : 2007 AMD 2 2014 | Identical |
| VDE 0636-1 : 2015 | Identical |
| IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Identical |
| NEN 10269-1 : 90 AMD 2 97 | Identical |
| CEI EN 60269-1:2009/A2:2015 | Identical |
| I.S. EN 60269-1:2007 | Identical |
| NF EN 60269-1 : 2007 AMD 2 2014 | Identical |
| SN EN 60269-1:2007+A1:2009+A2:2014 | Identical |
| UNE-EN 60269-1:2008 | Identical |
| BS 88-1(2007) : 2007 | Identical |
| NFC 60 200 : 1982 | Identical |
| BS EN 60269-1:2007+A2:2014 | Identical |
| BS 88-1(1988) : 1988 AMD 8310 | Identical |
| BS EN 45510-2-3:2000 | Guide for the procurement of power station equipment Electrical equipment. Stationary batteries and chargers |
| CEI EN 60947-4-3 : 2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS |
| CEI EN 61881-1 : 2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 1: PAPER/PLASTIC FILM CAPACITORS |
| BS EN 61036:1997 | Alternating current static watt-hour meters for active energy (classes 1 and 2) |
| 94/712993 DC : DRAFT NOV 1994 | PREN 45511 - GUIDE FOR PROCUREMENT - ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| CEI EN 61534-1 : 2012 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. HD 60269-3:2010 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F (IEC 60269-3:2010 (MOD)) |
| BS EN 60831-1:2014 | Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V General. Performance, testing and rating. Safety requirements. Guide for installation and operation |
| BS EN 60730-2-4:2007 | Automatic electrical controls for household and similar use Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type |
| CEI EN 60269-6 : 2012 | LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
| UNE-EN 61534-1:2011 | Powertrack systems -- Part 1: General requirements |
| BS EN 61881:2000 | Railway applications. Rolling stock equipment. Capacitors for power electronics |
| DIN EN 45510-2-7:2003-12 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| I.S. EN 60947-4-3:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS |
| I.S. EN 60694:1999 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| I.S. EN 60309-1:1999 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999 (EQV)) |
| I.S. EN 61881-1:2011 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 1: PAPER/PLASTIC FILM CAPACITORS |
| BS EN 60947-4-3:2014 | Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads |
| BS EN 60947-2:2017 | Low-voltage switchgear and controlgear Circuit-breakers |
| EN 1366-11:2018 | Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components |
| EN 60077-5:2003 | Railway applications - Electrotechnical equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses |
| UNI EN 81-22 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| EN 50178:1997 | Electronic equipment for use in power installations |
| EN 61881-1:2011 | Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 1: Paper/plastic film capacitors |
| EN 50091-1-1:1996/corrigendum Aug. 2004 | |
| CLC/TR 60269-5:2011 | Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses |
| EN 61058-1:2002/A2:2008 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| EN 60947-4-3:2014 | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| EN 60694:1996/A2:2001 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| DIN VDE 0641-11 : 1992 | CIRCUIT-BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 60947-4-2:2012 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| EN 60831-1:2014/AC:2014 | SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION |
| HD 60364-4-43:2010 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| EN 60269-4:2009/A2:2016 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009/A2:2016) |
| CEI EN 60730-2-4 : 2008 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR-COMPRESSORS OF HERMETIC AND SEMI-HERMETIC TYPE |
| BS EN 45510-2-7:2002 | Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear |
| DIN VDE 0660-100 : 1992 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| BS HD 60269-2:2013 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K |
| CEI UNI EN 45510-2-7 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| I.S. EN IEC 62613-1:2018 | PLUGS, SOCKET-OUTLETS AND SHIP COUPLERS FOR HIGH-VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS) - PART 1: GENERAL REQUIREMENTS |
| BS EN 61058-1 : 2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| 95/214875 DC : 0 | PREN 50222 - STANDARD FOR THE EVALUATION OF MEASUREMENT RESULTS TAKING MEASUREMENT UNCERTAINTY INTO ACCOUNT |
| BS EN 60439-5:2006 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks |
| BS EN 50178:1998 | Electronic equipment for use in power installations |
| CEI UNI EN 45510-2-4 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-4: ELECTRICAL EQUIPMENT - HIGH POWER STATIC CONVERTORS |
| EN 60947-2:2017 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| I.S. EN 61071:2007 | CAPACITORS FOR POWER ELECTRONICS |
| I.S. EN 60077-5:2003 | RAILWAY APPLICATIONS - ELECTROTECHNICAL EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES |
| I.S. HD 60269-2-1:2005 | LOW-VOLTAGE FUSES - PART 2-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - SECTIONS 1 TO 6: EXAMPLES OF TYPES OF STANDARDIZED FUSES |
| BS EN 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles General requirements |
| I.S. EN 60831-1:2014 | SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION |
| CEI EN 60947-4-2 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS |
| PREN 1366-11 : DRAFT 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 11: FIRE PROTECTIVE SYSTEMS FOR CABLE SYSTEMS AND ASSOCIATED COMPONENTS |
| CEI EN 62196-1 : 2015 | PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 62196-1:2015 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
| EN 60947-1:2007/A2:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
| BS 88-3:2007 | Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications). Examples of standardized systems of fuses A to F |
| BS 88-2(2013) : 2013 COR 2014 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K |
| BS 88-2:2007 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to I |
| BS 88-2(2010) : 2010 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO J |
| BS EN 60269-2:1995 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) |
| UNE-HD 60269-2:2014 | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| BS EN 60974-6:2016 | Arc welding equipment Limited duty equipment |
| UNE-EN 61008-1:2013 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules |
| I.S. EN 115:1995 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS |
| BS EN 60947-1 : 2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| I.S. EN 81-22:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| BS EN 60947-4-2:2012 | Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor motor controllers and starters |
| CEI 32-12 : 2014 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K |
| BS EN 60077-5:2003 | Railway applications. Electrotechnical equipment for rolling stock Electrotechnical components. Rules for HV fuses |
| I.S. EN 61008-1:2012&A1:2014/ac&A2:2014...A12:2017 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
| BS EN 61881-1:2011 | Railway applications. Rolling stock equipment. Capacitors for power electronics Paper/plastic film capacitors |
| EN 115-1:2017 | Safety of escalators and moving walks - Part 1: Construction and installation |
| BS EN 50463:2007 | Railway applications. Energy measurement on board trains |
| DIN EN 50091-1-1 : 1997 | |
| EN 61534-1:2011/A1:2014 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS (IEC 61534-1:2011/A1:2014) |
| PREN 50577 : DRAFT 2012 | ELECTRIC CABLES - FIRE RESISTANCE TEST FOR UNPROTECTED ELECTRIC CABLES (P CLASSIFICATION) |
| BS EN 61008-1 : 2012 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED) |
| I.S. EN 115-1:2017 | SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
| I.S. EN 61058-1:2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BS EN 60269-4 : 2009 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009) |
| I.S. EN 60974-6:2016 | ARC WELDING EQUIPMENT - PART 6: LIMITED DUTY EQUIPMENT |
| I.S. EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| I.S. EN 60947-2:2017 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS |
| I.S. EN 45510-2-7:2002 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| EN 81-22:2014 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
| ISO/TR 14799-1:2015 | Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison |
| I.S. EN 50300:2004 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS |
| BS EN 115:1995 | Safety rules for the construction and installation of escalators and passenger conveyors. |
| BS EN 81-22:2014 | Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Electric lifts with inclined path |
| UNE-EN 81-22:2014 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
| UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| EN 300 132-2 : 2.4.6 | ENVIRONMENTAL ENGINEERING (EE); POWER SUPPLY INTERFACE AT THE INPUT TO TELECOMMUNICATIONS AND DATACOM (ICT) EQUIPMENT; PART 2: OPERATED BY -48 V DIRECT CURRENT (DC) |
| BS EN 60694:1997 | Common specifications for high-voltage switchgear and controlgear standards |
| BS EN 50300:2004 | Low-voltage switchgear and controlgear assemblies. General requirements for low-voltage substation cable distribution boards |
| EN 61008-1:2012/A12:2017 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED) |
| 14/30299756 DC : 0 | BS EN 1366-11 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 11: FIRE PROTECTIVE SYSTEMS FOR CABLE SYSTEMS AND ASSOCIATED COMPONENTS |
| BS EN 61071:2007 | Capacitors for power electronics |
| BS HD 60269-3 : 2010 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| 12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| 05/30133451 DC : 0 | EN 115 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND MOVING WALKS |
| DIN VDE 0660-102 : 1992 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| 01/712575 DC : DRAFT SEP 2001 | ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEM - PART 2: VALIDATION |
| UNI CEI EN 45510-2-7 : 2011 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| UNE-EN 60947-4-3:2014 | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| UNE-EN 60269-4:2011 | Low-voltage fuses -- Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices |
| HD 60269-2-1:2005 | Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses |
| I.S. EN 61036:1997 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| I.S. EN 60269-4:2009 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES |
| CEI 32-13 : 2013 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| CEI UNI EN 45510-2-3 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-3: ELECTRICAL EQUIPMENT - STATIONARY BATTERIES AND CHARGERS |
| ISO/TR 14799-2:2015 | Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments |
| I.S. EN 60931-1:1997 | SHUNT POWER CAPACITORS OF THE NON-SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AN INCLUDING 1 KV - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS GUIDE FOR INSTALLATION AND OPERATION |
| I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
| S.R. CLC/TR 60269-5:2011 | LOW-VOLTAGE FUSES - PART 5: GUIDANCE FOR THE APPLICATION OF LOW-VOLTAGE FUSES |
| I.S. EN 61534-1:2011 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| S.R. CLC/TR 50480:2011 | DETERMINATION OF CROSS-SECTIONAL AREA OF CONDUCTORS AND SELECTION OF PROTECTIVE DEVICES |
| I.S. HD 60364-4-43:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-43: PROTECTION FOR SAFETY - PROTECTION AGAINST OVERCURRENT |
| EN 60269-6:2011 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| 95/214868 DC : 0 | PREN 50178 - ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
| BS EN 60947-2:2017+A1:2020 | Low-voltage switchgear and controlgear Circuit-breakers |
| 15/30324856 DC : 0 | BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
| PD CLC/TR 50480:2011 | Determination of cross-sectional area of conductors and selection of protective devices |
| PD ISO/TR 14799-2:2005 | Comparison of worldwide escalator and moving walk safety standards Abbreviated comparison and comments |
| UNE-HD 60364-4-43:2013 | Low-voltage electrical installations -- Part 4-43: Protection for safety - Protection against overcurrent |
| EN 45510-2-7:2002 | Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear |
| EN 45510-2-3:2000 | Guide for procurement of power station equipment - Part 2-4: Electrical equipment - Stationary batteries and chargers |
| 12/30260450 DC : 0 | BS EN 50577 - ELECTRIC CABLES - FIRE RESISTANCE TEST FOR UNPROTECTED ELECTRIC CABLES (P CLASSIFICATION) |
| CEI EN 60077-5 : 2004 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES |
| CEI EN 61071 : 2007 | CAPACITORS FOR POWER ELECTRONICS |
| DIN VDE 0660-101 : 1992 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT BREAKERS |
| BS EN 50091-1-1:1997 | Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas |
| BS EN 61534-1 : 2011 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS 88-3(2010) : 2010 COR 2014 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| BS EN 60269-6:2011 | Low-voltage fuses Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| I.S. EN 60269-6:2011 | LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
| DIN EN 61881 : 2000 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS |
| EN IEC 62613-1:2018 | Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements |
| I.S. EN 60947-1:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| I.S. HD 60269-2:2013 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K (IEC 60269-2:2013 (MOD)) |
| I.S. EN 60947-4-2:2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS |
| CEI UNI EN 45510-2-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-2: ELECTRICAL EQUIPMENT - UNINTERRUPTIBLE POWER SUPPLIES |
| I.S. EN 50463:2007 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
| BS EN 60309-1 : 1999 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| BS EN 115-1:2017 | Safety of escalators and moving walks Construction and installation |
| I.S. EN 50091-1-1:2004 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1-1: GENERAL AND SAFETY REQUIREMENTS FOR UPS USED IN OPERATOR ACCESS AREAS |
| UNE-EN 60269-6:2012 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| UNE-EN 62752:2017 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| I.S. EN 62196-1:2014 | PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60730-2-4:2007 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-4: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR-COMPRESSORS OF HERMETIC AND SEMI-HERMETIC TYPE |
| DIN EN 81-22:2014-12 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
| BS EN 45510-2-2:1999 | Guide for the procurement of power station equipment. Electrical equipment Uninterruptible power supplies - Uninterruptible power supplies for power plants |
| PD ISO/TR 14799-1:2005 | Comparison of worldwide escalator and moving walk safety standards Rule by rule comparison |
| BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
| EN 60309-1:1999/A1:2007/AC:2014 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012) |
| EN 115:1995/A2:2004 | SAFETY RULES FOR THE CONSTRUCTION & INSTALLATION OF ESCALATORS & PASSENGER CONVEYORS |
| EN 60931-1:1996/A1:2003 | SHUNT POWER CAPACITORS OF THE NON-SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1 KV - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION |
| EN 61036:1996/A1:2000 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| EN 60730-2-4:2007 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-4: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR-COMPRESSORS OF HERMETIC AND SEMI-HERMETIC TYPE |
| CLC/TR 50480:2011 | Determination of cross-sectional area of conductors and selection of protective devices |
| EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| HD 60269-3:2010/A1:2013 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| EN 61071:2007 | Capacitors for power electronics |
| HD 60269-2:2013 | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| EN 60974-6:2016 | Arc welding equipment - Part 6: Limited duty equipment |
| EN 50463:2007 | Railway applications - Energy measurement on board trains |
| EN 60269-2:1995/A2:2002 | LOW-VOLTAGE FUSES - SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) |
| EN 50300:2004 | Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards |
| EN 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
| BS 88-4(2007) : 2007 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES |
| BS 88-4(2009) : 2009 + A2 2016 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009) |
| EN 60269-6:2011 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| IEC 60038:2009 | IEC standard voltages |
| IEC 60228:2004 | Conductors of insulated cables |
| IEC 60269-4:2009+AMD1:2012+AMD2:2016 CSV | Low-voltage fuses - Part 4: Supplementary requirements forfuse-links for the protection of semiconductor devices |
| IEC 60269-6:2010 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| IEC 60127:1974 | Cartridge fuse-links for miniature fuses |
| IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
| IEC 60269-2:2013+AMD1:2016 CSV | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| ISO 3:1973 | Preferred numbers Series of preferred numbers |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| EN 60228:2005 COR 2005 | CONDUCTORS OF INSULATED CABLES |
| ISO 478:1974 | Paper — Untrimmed stock sizes for the ISO-A Series — ISO primary range |
| HD 472 S1:1989/AC:2013 | NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS |
| IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
| EN 60695-2-13:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014) |
| EN 60269-4:2009/A2:2016 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009/A2:2016) |
| IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60269-3:2010+AMD1:2013 CSV | Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F |
| EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| EN 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| IEC 60364-3:1993 | Electrical installations of buildings - Part 3: Assessment of general characteristics |
| EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| ISO 4046:1978 | Paper, board, pulp and related terms — Vocabulary |
| HD 60269-2:2013 | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
| ISO 593:1974 | Paper Untrimmed stock sizes for the ISO-A Series ISO supplementary range |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| HD 384.3 : 200S2 | ELECTRICAL INSTALLATIONS OF BUILDINGS - ASSESSMENT OF GENERAL CHARACTERISTICS |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| EN 60695-2-12:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014) |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| HD 60269-3:2010/A1:2013 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| IEC 60364-5-52:2009 | Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
| EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.