PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION

Amendment of

EN 60368-1:2000

Published date

20-09-2004

Publisher

European Committee for Standards - Electrical

Foreword
1 General
  1.1 Scope
  1.2 Normative references
  1.3 Order of precedence
2 Terminology and general requirements
  2.1 General
  2.2 Definitions
  2.3 Preferred values for ratings and characteristics
  2.4 Marking
3 Quality assessment procedures
  3.1 Primary stage of manufacture
  3.2 Structurally similar components
  3.3 Subcontracting
  3.4 Incorporated components
  3.5 Manufacturer's approval
  3.6 Approval procedures
  3.7 Procedures for capability approval
  3.8 Procedures for qualification approval
  3.9 Test procedures
  3.10 Screening requirements
  3.11 Rework and repair work
  3.12 Certified records of released lots
  3.13 Validity of release
  3.14 Release for delivery
  3.15 Unchecked parameters
4 Test and measurement procedures
  4.1 General
  4.2 Test and measurement conditions
  4.3 Visual inspection
  4.4 Dimensions and gauging procedures
  4.5 Electrical test procedures
  4.6 Mechanical and environmental test procedures
  4.7 Endurance test procedure
Bibliography
Annex ZA (normative) Normative references to international
         publications with their corresponding European
         publications

Defines test methods and general criteria for piezoelectric filters of assessed quality either by using qualification approval or capability approval procedures.

Committee	SR 49
DevelopmentNote	Supersedes EN 167000. (10/2001)
DocumentType	Test Method
PublisherName	European Committee for Standards - Electrical
Status	Current
Supersedes	EN 167000 : 1993 AMD 1 1997

Standards	Relationship
NF EN 60368-1 : 2000 AMD 1 2006	Identical
SN EN 60368-1 : 2000	Identical
CEI EN 60368-1 : 2006	Identical
BS EN 60368-1:2000	Identical
NEN EN IEC 60368-1 : 2000 AMD 1 2004	Identical
DIN EN 60368-1:2005-04	Identical
I.S. EN 60368-1:2000	Identical
NBN EN 60368-1 : 2000 AMD 1 2005	Identical
PN EN 60368-1 : 2002 AMD 1 2005	Identical
IEC 60368-1:2000+AMD1:2004 CSV	Identical
IEC 60368-1:2000/AMD1:2004	Identical

BS EN 60368-4:2001	Piezoelectric filters Sectional specification. Capability approval
BS EN 60368-3:2010	Piezoelectric filters of assessed quality Standard outlines and lead connections
CEI EN 60368-4 : 2003	PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 4: SECTIONAL SPECIFICATION - CAPABILITY APPROVAL
EN 61837-2:2011/A1:2014	SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION - STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS - PART 2: CERAMIC ENCLOSURES (IEC 61837-2:2011/A1:2014)
EN 61837-3:2015	Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 3: Metal enclosures
EN 60368-3:2010	Piezoelectric filters of assessed quality - Part 3: Standard outlines and lead connections
BS EN 62047-7:2011	Semiconductor devices. Micro-electromechanical devices MEMS BAW filter and duplexer for radio frequency control and selection
BS EN 61837-3:2015	Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections Metal enclosures
BS EN 60368-4-1:2001	Piezoelectric filters. Blank detail specification. Capability approval
BS EN 61837-2 : 2011	SURFACE MOUNTED PIEZOELECTRIC DEVICES FOR FREQUENCY CONTROL AND SELECTION - STANDARD OUTLINES AND TERMINAL LEAD CONNECTIONS - PART 2: CERAMIC ENCLOSURES
EN 62047-7 : 2011	SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 7: MEMS BAW FILTER AND DUPLEXER FOR RADIO FREQUENCY CONTROL AND SELECTION

HD 323.2.20 : 200S3	BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST T - SOLDERING
IEC 60368-4:2000	Piezoelectric filters of assessed quality - Part 4 : Sectional specification - Capability approval
IEC 60068-1:2013	Environmental testing - Part 1: General and guidance
IEC 60068-2-58:2015+AMD1:2017 CSV	Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
IEC 60068-2-27:2008	Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-20:2008	Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
EN 60068-2-1:2007	Environmental testing - Part 2-1: Tests - Test A: Cold
IECQ 001002-3:2005	IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES
EN 60068-2-2:2007	Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-21:2006	Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
IEC 60068-2-13:1983	Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure
EN 60068-1:2014	Environmental testing - Part 1: General and guidance
EN 60068-2-64:2008	ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE
IECQ 001002-2:1998	IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 2: DOCUMENTATION
EN 61000-4-2:2009	Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
EN 60068-2-7:1993	Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state
IEC 60068-2-64:2008	Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
IEC QC 001004 : 2.0
IEC 60410:1973	Sampling plans and procedures for inspection by attributes
EN 60068-2-27:2009	Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
HD 323.2.3 : 200S2	BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST CA - DAMP HEAT, STEADY STATE
IEC 60068-2-3:1969	Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state
IEC GUIDE 102:1996	Electronic components - Specification structures for qualityassessment (Qualification approval and capability approval)
EN 60068-2-17:1994	Environmental testing - Part 2: Tests - Test Q: Sealing
IEC 60068-2-17:1994	Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing
IEC 60068-2-10:2005	Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
EN 60068-2-21:2006	Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
IEC 60068-2-2:2007	Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 61000-4-2:2008	Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
HD 323.2.10 : 200S3	BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST J AND GUIDANCE: MOULD GROWTH
IECQ 001002-1:1998	IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 1: ADMINISTRATION
EN 60068-2-29:1993	Environmental testing - Part 2: Tests - Test Eb and guidance: Bump
EN 60068-2-13:1999	Environmental testing - Part 2: Tests - Test M: Low air pressure
EN 60068-2-6:2008	Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60050-561:2014	International Electrotechnical Vocabulary (IEV) - Part 561: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection
IEC 60068-2-29:1987	Environmental testing. Part 2: Tests. Test Eb and guidance: Bump
IEC 60068-2-1:2007	Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 61178-1:1993	Quartz crystal units - A specification in the IEC Quality Assessment System for Electronic Components (IECQ) - Part 1: Generic specification
EN 60068-2-30:2005	Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
EN 60068-2-32:1993	Basic environmental testing procedures - Part 2: Tests - Test Ed: Free fall
IEC 60068-2-14:2009	Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 60068-2-45:1992/A1:1993	Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents
EN 60068-2-14:2009	Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-52:2017	Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
IEC 60068-2-30:2005	Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

EN 60368-1:2000/A1:2004

PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory