Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 60825-4:2006/A2:2011

Current
Current

The latest, up-to-date edition.

SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS
Published date

06-05-2011

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 Laser processing machines
  4.1 Design requirements
  4.2 Performance requirements
  4.3 Validation
  4.4 User information
5 Proprietary laser guards
  5.1 Design requirements
  5.2 Performance requirements
  5.3 Specification requirements
  5.4 Test requirements
  5.5 Labelling requirements
  5.6 User information
Annex A (informative) General guidance on the design and
                       selection of laser guards
Annex B (informative) Assessment of foreseeable exposure
                       limit (FEL)
Annex C (informative) Elaboration of defined terms
Annex D (normative) Proprietary laser guard testing
Annex E (informative) Guidelines on the arrangement and
                       installation of laser guards
Annex F (informative) Guideline for assessing the suitability
                       of laser guards
Annex G (normative) Beam delivery systems
Annex ZA (normative) Normative references to international
                       publications with their corresponding
                       European publications
Bibliography

Defines the requirements for laser guards, permanent and temporary (for example for service), that enclose the process zone of a laser processing machine, and specifications for proprietary laser guards.

Committee
TC 76
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current

09/30201995 DC : 0 BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
BS EN 15093:2008 Safety of machinery. Safety requirements for hot flat rolling mills
10/30185766 DC : 0 BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
I.S. CLC/TR 50448:2005 GUIDE TO LEVELS OF COMPETENCE REQUIRED IN LASER SAFETY
I.S. EN 15061:2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
DIN EN ISO 15616-1 E : 2003 ACCEPTANCE TESTS FOR CO[2]-LASER BEAM MACHINES FOR HIGH QUALITY WELDING AND CUTTING - PART 1: GENERAL PRINCIPLES, ACCEPTANCE CONDITIONS
BS EN 12254:2010 Screens for laser working places. Safety requirements and testing
BS EN 1889-1:2011 Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles
EN 12254:2010/AC:2011 SCREENS FOR LASER WORKING PLACES - SAFETY REQUIREMENTS AND TESTING
DIN EN 15949:2012-05 Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
UNI EN 15093 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
PREN 1889-1 : DRAFT 2010 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
CLC/TR 50448:2005 Guide to levels of competence required in laser safety
I.S. EN 15949:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
BS EN 15061 : 2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
UNI EN 15949 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
DIN EN 12254:2012-04 SCREENS FOR LASER WORKING PLACES - SAFETY REQUIREMENTS AND TESTING
I.S. EN 12254:2010 SCREENS FOR LASER WORKING PLACES - SAFETY REQUIREMENTS AND TESTING
I.S. EN 1889-1:2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
ONORM EN 15094 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
BS EN 15949:2012 Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills
DIN EN 15061:2009-05 Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008)
UNI EN 15094 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
DIN EN 15093:2009-06 Safety of machinery - Safety requirements for hot flat rolling mills
DIN EN 15094:2009-04 Safety of machinery - Safety requirements for cold flat rolling mills
PD CLC/TR 50448:2005 Guide to levels of competence required in laser safety
BS EN 15094:2008 Safety of machinery. Safety requirements for cold flat rolling mills
I.S. EN 15093:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
UNE-EN 1889-1:2012 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
DIN EN 1889-1:2011-10 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
BS EN ISO 15616-1:2003 Acceptance tests for CO<sub>2</sub>- laser beam machines for high quality welding and cutting General principles, acceptance conditions
UNI EN 1889-1 : 2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
UNI EN 15061 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
ONORM EN 15061 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
UNI EN 12254 : 2010 SCREENS FOR LASER WORKING PLACES - SAFETY REQUIREMENTS AND TESTING
DIN EN 15061 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
DIN EN 15093 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
I.S. EN 15094:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
ISO 15616-1:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting Part 1: General principles, acceptance conditions
EN ISO 15616-1:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003)
EN 15094:2008 Safety of Machinery - Safety requirements for cold flat rolling mills
EN 15061:2007+A1:2008 Safety of machinery - Safety requirements for strip processing line machinery and equipment
EN 15949:2012 Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
EN 15093:2008 Safety of Machinery - Safety requirements for hot flat rolling mills
EN 1889-1:2011 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
10/30197237 DC : 0 BS ISO 28902 - AIR QUALITY - ENVIRONMENTAL METEOROLOGY - GROUND-BASED REMOTE SENSING OF VISUAL RANGE
DIN EN 15094 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
DIN EN 1889-1 E : 2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES

EN ISO 11553-1:2008 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
ISO 14119:2013 Safety of machinery Interlocking devices associated with guards Principles for design and selection
EN 60825-1:2014/AC:2017-06 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
CLC/TS 61496-2:2006 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
ISO 11252:2013 Lasers and laser-related equipment — Laser device — Minimum requirements for documentation
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
EN ISO 14121-1:2007 Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 61310-3:2008 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
IEC 61310-3:2007 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
ISO 10218:1992 Manipulating industrial robots Safety
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
ISO 14121-1:2007 Safety of machinery Risk assessment Part 1: Principles
ISO/TR 14121-2:2012 Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods
IEC TR 60825-14:2004 Safety of laser products - Part 14: A user's guide
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
CLC/TS 62046:2008 Safety of machinery - Application of protective equipment to detect the presence of persons
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN 775:1992/AC:1993 MANIPULATING INDUSTRIAL ROBOTS - SAFETY
IEC TS 62046:2008 Safety of machinery - Application of protective equipment to detect the presence of persons
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
IEC 61496-2:2013 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
ISO 11553-1:2005 Safety of machinery Laser processing machines Part 1: General safety requirements
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more