EN 61000-4-11:2004/A1:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017)
Amendment of
Superseded date
02-02-2022
Published date
04-08-2017
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Test levels
6 Test instrumentation
7 Test set-up
8 Test procedures
9 Evaluation of test results
10 Test report
Annex A (normative) - Test circuit details
Annex B (informative) - Electromagnetic environment
classes
Annex C (informative) - Test instrumentation
Annex D (informative) - Rationale for generator
specification regarding voltage, rise-time and
fall-time, and inrush current capability
Annex ZA (normative) - Normative references to
International publications with their corresponding
European publications
Bibliography
Specifies the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage power supply networks for voltage dips, short interruptions, and voltage variations.
| Committee |
TC 210
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| OVE/ONORM EN 61000-4-11 : 2005 | Identical |
| NF EN 61000-4-11 : 2004 AMD 1 2017 | Identical |
| UNE-EN 61000-4-11:2005 | Identical |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Identical |
| NBN EN 61000 4-11 : 2005 | Identical |
| NEN EN IEC 61000-4-11 : 2004 AMD 1 2017 | Identical |
| I.S. EN 61000-4-11:2004 | Identical |
| PN EN 61000-4-11 : 2007 AMD 1 2017 | Identical |
| SN EN 61000-4-11 : 2004 | Identical |
| VDE 0847-4-11 : 2005 | Identical |
| DIN EN 61000-4-11 : 2005 | Identical |
| CEI EN 61000-4-11 / A1:2018 | Identical |
| VDE 0847-4-11:2019-06 | Identical |
| OVE EN 61000-4-11: 2019 07 01 | Identical |
| I.S. EN 61000-4-11:2004/A1:2017 | Identical |
| BS EN 61000-4-11 : 2004 | Identical |
| CEI EN 61000-4-11 : 2006 | Identical |
| BS EN 61000-4-11:2004+A1:2017 | Identical |
| I.S. EN 50090-2-2:1998 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
| UNE-EN 60947-5-3:2014 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| I.S. EN 61326-1:2013 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS (IEC 61326-1:2012 (EQV)) |
| BS EN 60669-2-5:2016 | Switches for household and similar fixed electrical installations Particular requirements. Switches and related accessories for use in home and building electronic systems (HBES) |
| I.S. EN 61000-4-25:2002 | ELECTROMAGNETIC COMPATIBILITY (EMC) - TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001 (EQV)) |
| BS EN 60974-10 : 2014 | ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| BS EN 50065-2-3:2003 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 Khz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors |
| 11/30253123 DC : 0 | BS EN 12016 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY |
| BS EN 50240:2004 | Electromagnetic compatibilty (EMC). Product standard for resistance welding equipment |
| BS EN 14846:2008 | Building hardware. Locks and latches. Electromechanically operated locks and striking plates. Requirements and test methods |
| EN 63002:2017 | Identification and communication interoperability method for external power supplies used with portable computing devices |
| NF EN 50491-5-2 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT |
| CLC/TS 62603-1:2014 | Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications |
| CEI EN 61869-6 : 1ED 2017 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| I.S. EN 61800-3:2005 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV)) |
| I.S. EN 50065-2-2:2003 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS |
| BS EN 50199:1996 | Electromagnetic compatibility (EMC). Product standard for arc welding equipment |
| BS EN 50412-2-1:2005 | Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz Residential, commercial and industrial environment - Immunity requirements |
| CEI EN 60947-5-3 : 2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
| I.S. EN 50270:2015 | ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| EN 61326-1:2013 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
| BS EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) Generic standards. Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
| CEI EN 60601-1-2 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| 11/30251478 DC : 0 | BS EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| BS EN 50270:2015 | Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| BS EN 50490:2008 | Electrical installations for lighting and beaconing of aerodromes. Technical requirements for aeronautical ground lighting control and monitoring systems. Units for selective switching and monitoring of individual lamps |
| BS EN 50293:2012 | Road traffic signal systems. Electromagnetic compatibility |
| BS EN 62387:2016 | Radiation protection instrumentation. Passive integrating dosimetry systems for individual, workplace and environmental monitoring of photon and beta radiation |
| EN 60947-5-1:2017 | Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices |
| BS EN 50065-2-2:2003 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments |
| PREN 12405-3 : DRAFT 2013 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| BS EN 55104:1995 | Electromagnetic compatibility. Immunity requirements for household appliances, tools and similar apparatus. Product family standard |
| DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
| DIN EN 12405-2:2012-10 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| I.S. EN 60255-11:2010 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 11: VOLTAGE DIPS, SHORT INTERRUPTIONS, VARIATIONS AND RIPPLE ON AUXILIARY POWER SUPPLY PORT |
| BS EN 62080 : 2009 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
| UNE-EN 12405-1:2006 | Gas meters - Conversion devices - Part 1: Volume conversion |
| CEI EN 50293 : 2013 | ROAD TRAFFIC SIGNAL SYSTEMS - ELECTROMAGNETIC COMPATIBILITY |
| EN 62488-2:2017 | Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC |
| I.S. EN 61326-3-2:2008 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
| I.S. EN 60974-10:2014 | ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| I.S. EN 60204-31:2013 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 31: PARTICULAR SAFETY AND EMC REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (IEC 60204-31:2013 (EQV)) |
| I.S. EN 61850-3:2014 | COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS |
| EN 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
| BS EN 12405-1 : 2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 61869-6:2016 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| UNE-EN 60255-11:2010 | Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port |
| BS EN 60947-2:2017 | Low-voltage switchgear and controlgear Circuit-breakers |
| BS EN 60770-1:1999 | Transmitters for use in industrial-process control systems Methods for performance evaluation |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 62387-1:2012 | RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS (IEC 62387-1:2007 (MOD)) |
| BS EN 61812-1:2011 | Time relays for industrial and residential use Requirements and tests |
| I.S. EN 60945:2002 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| UNI EN 12405-1 : 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 62488-2:2017 | POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
| NF EN 55103-2 : 2009 | ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR AUDIO, VIDEO, AUDIO-VISUAL AND ENTERTAINMENT LIGHTING CONTROL APPARATUS FOR PROFESSIONAL USE - PART 2: IMMUNITY |
| I.S. EN 61674:2013 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMICONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING (IEC 61674:2012 (EQV)) |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| DIN EN 13763-26:2004-11 | Explosives for civil uses - Detonators and relays - Part 26: Definitions, methods and requirements for devices and accessories for reliable and safe function of detonators and relays; German version EN 13763-26:2004 |
| DIN EN 12953-9:2007-09 | Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
| UNE-EN 298:2013 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| BS EN 45501:2015 | Metrological aspects of non-automatic weighing instruments |
| BS EN 61851-21:2002 | Electric vehicle conductive charging system Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
| UNE-EN 12645:2015 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| BS EN 12645:2014 | Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing |
| UNE-EN 61812-1:2012 | Time relays for industrial and residential use - Part 1: Requirements and tests |
| BS EN 13763-26:2004 | Explosives for civil uses. Detonators and relays Definitions, methods and requirements for devices and accessories for reliable and safe functioning of detonators and relays |
| EN 61326-3-2:2008 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
| EN 60770-1:2011 | Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation |
| DIN EN 230:2005-10 | AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| DIN EN 14154-2:2011-06 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| EN 12405-2:2012 | Gas meters - Conversion devices - Part 2: Energy conversion |
| EN 61058-1:2002/A2:2008 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| EN 61000-6-5:2015/AC:2018-01 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT (IEC 61000-6-5:2015/COR1:2017) |
| EN 12067-2:2004 | Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |
| EN 61547:2009 | Equipment for general lighting purposes - EMC immunity requirements |
| EN 62080:2009/A2:2015 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES (IEC 62080:2001/A2:2015) |
| DIN EN 14846:2008-11 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| EN 55014-2:2015 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
| EN 50293:2012 | Road traffic signal systems - Electromagnetic compatibility |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 60947-8:2003/A2:2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003/A2:2011) |
| EN 60601-1-2:2015 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| EN 50412-2-1 : 2005 COR 2009 | POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS |
| EN 62387-1:2012 | Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements |
| EN 60669-2-5:2016 | Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) |
| EN 61131-2:2007 | Programmable controllers - Part 2: Equipment requirements and tests |
| EN 12952-11:2007 | Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories |
| EN 12645:2014 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| EN 62387 : 2016 | RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION (IEC 62387:2012, MODIFIED) |
| EN 61869-6:2016 | Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers |
| EN 61514-2:2013 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013) |
| EN 61850-3:2014 | Communication networks and systems for power utility automation - Part 3: General requirements |
| EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| EN 61298-3:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities |
| EN 50130-4:2011/A1:2014 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| EN 50490:2008 | Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps |
| EN 50091-2:1995/corrigendum Jan. 1998 | |
| EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| PREN 1643 : DRAFT 2012 | VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| CEI 13-32 : 2000 | WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS |
| CEI EN 62282-3-201 : 2014 | FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS |
| NF EN 301489-1 : 2012 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES - PART 1: COMMON TECHNICAL REQUIREMENTS |
| BS EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results |
| BS EN 60861:2008 | Equipment for monitoring of radionuclides in liquid effluents and surface waters |
| 11/30255400 DC : 0 | BS EN 50293 - ELECTROMAGNETIC COMPATIBILITY - ROAD TRAFFIC SIGNAL SYSTEMS |
| PREN 12405-1 : DRAFT 2017 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| 12/30267815 DC : 0 | BS EN 1643 - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| BS EN 61000-6-2:2005 | Electromagnetic compatibility (EMC) Generic standards - Immunity for industrial environments |
| BS EN 61674:2013 | Medical electrical equipment. Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| 05/30127272 DC : DRAFT JAN 2005 | EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| DIN EN 14846:2015-07 (Draft) | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| UNI EN 14846 : 2008 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| TS 102 192-1 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); INTERNATIONAL TECHNICAL CHARACTERISTICS AND TEST METHODS; PART 1: WIRELESS/RADIO MICROPHONES IN THE 25 MHZ TO 3 GHZ FREQUENCY RANGE |
| I.S. EN 61514-2:2013 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013 (EQV)) |
| BS EN 55103-2:2009 | Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use Immunity |
| PD CLC/TS 62603-1:2014 | Industrial process control systems. Guideline for evaluating process control systems Specifications |
| BS EN 62135-2:2015 | Resistance welding equipment Electromagnetic compatibility (EMC) requirements |
| CEI EN 61547 : 2010 | EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS |
| BS EN 63002 : 2017 | IDENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNAL POWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES |
| CEI EN 61326-3-2 : 2011 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
| I.S. EN 61000-6-1:2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| CEI EN 62386-101 : 2016 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 101: GENERAL REQUIREMENTS - SYSTEM COMPONENTS |
| BS EN 62920:2017 | Photovoltaic power generating systems. EMC requirements and test methods for power conversion equipment |
| NF ETS 300342-3 : 2001 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ELECTROMAGNETIC COMPATIBILITY (EMC) FOR EUROPEAN DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (GSM 900 MHZ AND DCS 1800 MHZ) - PART 3: BASE STATION RADIO AND ANCILLARY EQUIPMENT AND REPEATERS MEETING PHASE 2 GSM REQUIREMENTS |
| UNE-EN 50293:2013 | Road traffic signal systems - Electromagnetic compatibility |
| BS EN 60325:2004 | Radiation protection instrumentation. Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors |
| BS EN 50491-5-2:2010 | General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) EMC requirements for HBES/BACS used in residential, commercial and light industry environment |
| NF EN 61204-3 : 2001 | LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC) |
| 03/112283 DC : DRAFT AUG 2003 | EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| IEEE DRAFT 1346 : D4.1 FEB 97 | DRAFT RECOMMENDED PRACTICE FOR EVALUATING ELECTRIC POWER SYSTEM COMPATIBILITY WITH ELECTRONIC PROCESS EQUIPMENT |
| I.S. EN 61326-3-1:2017 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS |
| CEI EN 61851-22 : 2003 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION |
| CEI EN 62488-2 : 1ED 2018 | POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
| BS EN 50130-4 : 2011 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| CEI EN 62689-1 : 1ED 2017 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| I.S. EN 60669-2-5:2016 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-5: PARTICULAR REQUIREMENTS - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) |
| CEI EN 61000-6-2 : 2006 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS |
| TR 103 088 : 1.3.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); USING THE ETSI EN 301 489 SERIES OF EMC STANDARDS |
| CEI EN 61526 : 2013 | RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS |
| I.S. EN 50491-5-2:2010 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS, FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT |
| EN IEC 61058-1:2018 | Switches for appliances - Part 1: General requirements |
| UNE-EN 12405-3:2016 | Gas meters - Conversion devices - Part 3: Flow computer |
| CEI EN 50490 : 2009 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS |
| CEI EN 60945 : 2003 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| CEI EN 55035 : 2018 | ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS |
| TR 102 121 : 1.2.1 | ENVIRONMENTAL ENGINEERING (EE); GUIDANCE FOR POWER DISTRIBUTION TO TELECOMMUNICATION AND DATACOM EQUIPMENT |
| ES 201 468 : 1.4.1 | ADDITIONAL ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS AND RESISTIBILITY REQUIREMENTS FOR TELECOMMUNICATIONS EQUIPMENT FOR ENHANCED AVAILABILITY OF SERVICE IN SPECIFIC APPLICATIONS |
| I.S. EN 60325:2004 | RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS |
| BS EN 60044-8:2002 | Instrument transformers Electronic current transformers |
| EN 60947-2:2017 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| CEI EN 61326-3-1 : 2011 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS |
| BS EN 61058-1 : 2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| CEI EN 62022 : 2008 | INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES |
| I.S. EN 61058-1:2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BS EN 60947-1 : 2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| I.S. EN 50470-1:2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| I.S. EN 61547:2009 | EQUIPMENT FOR GENERAL LIGHTING PURPOSES - EMC IMMUNITY REQUIREMENTS |
| I.S. EN 61131-2:2007 | PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
| PREN 16867 : DRAFT 2015 | BUILDING HARDWARE - MECHATRONIC DOOR FURNITURE - REQUIREMENTS AND TEST METHODS |
| EN 1434-4:2015 | Heat meters - Part 4: Pattern approval tests |
| I.S. EN 1434-4:2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| CEI EN 61131-9 : 2014 | PROGRAMMABLE CONTROLLERS - PART 9: SINGLE-DROP DIGITAL COMMUNICATION INTERFACE FOR SMALL SENSORS AND ACTUATORS (SDCI) |
| UNE-EN 62080:2010 | Sound signalling devices for household and similar purposes |
| CEI EN 62920 : 1ED 2018 | PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT |
| NF ETS 300684 : 1998 | |
| UNE-EN 14846:2010 | Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
| I.S. ETSI EN 301489-1 V1.8.1:2009 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS |
| I.S. EN 62135-2:2015 | RESISTANCE WELDING EQUIPMENT - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| I.S. EN 60947-8:2003 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003 (EQV)) |
| DIN EN 12645:2015-02 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| DIN EN 1643:2014-09 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| DIN EN 12016:2013-12 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
| BS EN 14154-3 : 2005 | WATER METERS - PART 3: TEST METHODS AND EQUIPMENT |
| BS EN 61131-2:2007 | Programmable controllers Equipment requirements and tests |
| I.S. EN 1643:2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| DIN EN 1643:2001-02 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| I.S. EN 14143:2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| DIN EN 1434-4:2019-08 | Thermal energy meters - Part 4: Pattern approval tests (includes Amendment A1:2018) |
| I.S. EN 12016:2013 | ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY |
| I.S. EN 12645:2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
| I.S. EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| EN 60947-1:2007/A2:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
| I.S. EN 809:1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| I.S. EN 298:2012 | AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| VDI/VDE 2185 Blatt 1:2007-09 | Radio based communication in industrial automation |
| I.S. EN 12067-2:2004 | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 2: ELECTRONIC TYPES |
| VDE 0700-450 : 2001 | ELECTRICAL EQUIPMENT OF NON-ELECTRIC APPLIANCES FOR HOUSEHOLD AND SIMILAR PURPOSES - SAFETY REQUIREMENTS |
| CEI EN 62974-1 : 1ED 2017 | MONITORING AND MEASURING SYSTEMS USED FOR DATA COLLECTION, GATHERING AND ANALYSIS - PART 1: DEVICE REQUIREMENTS |
| I.S. EN 61000-6-7:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL LOCATIONS |
| BS EN 61869-6:2016 | Instrument transformers Additional general requirements for low-power instrument transformers |
| NF EN 300385 : 2001 | |
| BS EN 62022:2007 | Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles |
| I.S. EN 62386-101:2014 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 101: GENERAL REQUIREMENTS - SYSTEM COMPONENTS |
| ETS 300 673 : 20001 | RADIO EQUIPMENT AND SYSTEMS (RES); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR 4/6 GHZ AND 11/12/14 GHZ VERY SMALL APERTURE TERMINAL (VSAT) EQUIPMENT AND 11/12/13/14 GHZ SATELLITE NEWS GATHERING (SNG) |
| 13/30289289 DC : 0 | BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| UNE-EN 50490:2010 | Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps |
| CEI EN 60044-7 : 2001 | INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS |
| BS EN 61000-4-25 : 2002 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS |
| 10/30219053 DC : 0 | BS EN 50130-4 - ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD - IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS |
| UNI EN 12405-2 : 2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| EN 61851-21:2002 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply |
| BS EN 61851-22:2002 | Electric vehicle conductive charging system A.C. electric vehicle charging station |
| BS EN 61676 : 2002 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETRIC INSTRUMENTS USED FOR NON-INVASIVE MEASUREMENT OF X-RAY TUBE VOLTAGE IN DIAGNOSTIC RADIOLOGY |
| CEI EN 60947-5-9 : 2008 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES |
| TS 102 874-6 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); EXTERNAL COMMON POWER SUPPLY FOR CUSTOMER PREMISES NETWORK AND ACCESS EQUIPMENT; PART 6: CPS TYPE 2.D IMPLEMENTATION DETAILS |
| BS EN 60947-8:2003 | Low-voltage switchgear and controlgear Control units for built-in thermal protection (PTC) for rotating electrical machines |
| I.S. EN 62920:2017 | PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT |
| 10/30217314 DC : 0 | BS EN 298 - AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| UNE-EN 13637:2016 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| 11/30254162 DC : 0 | BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| UNE-EN 55103-2:2010 | Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity |
| CEI EN 61812-1 : 2012 | TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS |
| I.S. EN 13637:2015 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| 04/30124466 DC : DRAFT OCT 2004 | EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| 09/30202799 DC : 0 | BS EN 1300:2004/A1 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| BS EN 62282-3-201:2017 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods for small fuel cell power systems |
| BS EN 61000-4-1:2007 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Overview of IEC 61000-4 series |
| PREN 12067-2 : DRAFT 2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - PART 2: FUEL/AIR RATIO CONTROL/SUPERVISION OF THE ELECTRONIC TYPE |
| PREN 50293 : DRAFT 2011 | ELECTROMAGNETIC COMPATIBILITY - ROAD TRAFFIC SIGNAL SYSTEMS |
| EN 62974-1:2017 | Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements |
| UNE-EN 55024:2011 | Information technology equipment - Immunity characteristics - Limits and methods of measurement |
| BS EN 50091-2:1996 | Specification for uninterruptible power systems (UPS) EMC requirements |
| BS EN 61800-3 : 2004 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS |
| CEI EN 61326-1 : 2013 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 1: GENERAL REQUIREMENTS |
| NF EN 300279 : 2001 | |
| BS EN 61526:2013 | Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters |
| UNE-EN 61547:2011 | Equipment for general lighting purposes - EMC immunity requirements |
| I.S. EN 61326:1998 | |
| CEI EN 60770-1 : 2014 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
| BS EN 60947-5-2 : 2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES |
| I.S. EN 62022:2007 | INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES |
| I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| I.S. EN 60335-1:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CEI EN 61000-6-1 : 2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| I.S. EN 60947-5-3:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
| EN 61326-3-1:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications |
| I.S. EN 50065-2-1:2003 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-1: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRIAL ENVIRONMENTS |
| BS EN 60335-1 : 2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| TR 102 446 : 1.1.1 | ENVIRONMENTAL ENGINEERING (EE); GENERAL REQUIREMENTS FOR UPS FOR USE IN TELECOMMUNICATION ENVIRONMENT |
| I.S. EN 60846:2004 | RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION |
| BS EN 62271-1:2017 | High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear |
| BS EN 55024 : 2010 | INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT |
| I.S. EN 61000-6-5:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-5: GENERIC STANDARDS - IMMUNITY FOR EQUIPMENT USED IN POWER STATION AND SUBSTATION ENVIRONMENT |
| I.S. EN 61439-1:2011 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011) |
| I.S. EN 62115:2006 | ELECTRIC TOYS - SAFETY(IEC 62115:2003 (MOD) + A1:2004 (EQV)) |
| PREN 14846 : DRAFT 2015 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 1434-4:2016 | Heat meters - Part 4: Pattern approval tests |
| PREN 1434-4 : DRAFT 2014 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| I.S. EN 55014-2:2015 | ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 2: IMMUNITY - PRODUCT FAMILY STANDARD |
| UNE-EN 60669-2-5:2017 | Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) |
| VDE 0557-3 : 2001 COR 1 2004 | LOW-VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: PRODUCT EMC STANDARD |
| ETS 300 386-1 : 20001 | EQUIPMENT ENGINEERING (EE); PUBLIC TELECOMMUNICATION NETWORK EQUIPMENT ELECTRO-MAGNETIC COMPATIBILITY (EMC) REQUIREMENTS - PRODUCT FAMILY OVERVIEW, COMPLIANCE CRITERIA AND TEST LEVELS |
| EN 300 386-2 : 1.1.3 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); TELECOMMUNICATION NETWORK EQUIPMENT; ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS; PRODUCT FAMILY STANDARD |
| CEI EN 50491-5-2 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-2: EMC REQUIREMENTS FOR HBES/BACS USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY ENVIRONMENT |
| EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
| I.S. EN 60601-1-2:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| I.S. EN 14846:2008 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 62041:2010 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS |
| EN 62386-101:2014 | Digital addressable lighting interface - Part 101: General requirements - System components |
| I.S. EN 60947-2:2017 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS |
| DIN EN 12067-2:2015-12 (Draft) | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 2: ELECTRONIC TYPES |
| DIN EN 14143:2013-10 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| DIN EN 12952-11 E : 2007 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| UNE-EN 45501:2016 | Metrological aspects of non-automatic weighing instruments |
| BS EN 14154-2 : 2005 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| DIN EN 12952-11:2007-09 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| BS EN 809 : 1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| UNE-EN 50160:2011 | Voltage characteristics of electricity supplied by public electricity networks |
| EN 809 : 1998 COR 2010 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| UNE-EN 14154-3:2005 | Water meters - Part 3 : Test methods and equipment |
| EN 809:1998+A1:2009 | Pumps and pump units for liquids - Common safety requirements |
| UNE-EN 14154-2:2005 | Water meters - Part 2 : Installation and conditions of use |
| UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| EN 300 386 : 1.6.1 | TELECOMMUNICATION NETWORK EQUIPMENT; ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF THE DIRECTIVE 2014/30/EU |
| DIN EN 12067-2:2004-06 | Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |
| EN 13763-26 : 2004 | EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 26: DEFINITIONS, METHODS AND REQUIREMENTS FOR DEVICES AND ACCESSORIES FOR RELIABLE AND SAFE FUNCTION OF DETONATORS AND RELAYS |
| UNI EN 12952-11 : 2007 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 11: REQUIREMENTS FOR LIMITING DEVICES OF THE BOILER AND ACCESSORIES |
| UNI EN 809 : 2009 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 50199 : 95 AC 98 | |
| UNI EN 14143 : 2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| UNI EN 12645 : 2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
| UNI EN 1643 : 2014 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - VALVE PROVING SYSTEMS FOR AUTOMATIC SHUT-OFF VALVES |
| UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
| UNI EN 12016 : 2013 | ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY |
| UNI EN 14154-3 : 2011 | WATER METERS - PART 3: TEST METHODS AND EQUIPMENT |
| UNI EN 14154-2 : 2011 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| UNI EN 298 : 2012 | AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| CEI EN 61298-3 : 2011 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES |
| CEI EN 60044-8 : 2004 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS |
| NF ETS 300673 : 1998 | |
| I.S. EN 55104:1996 | ELECTROMAGNETIC COMPATIBILITY IMMUNITY REQUIREMENTS FOR HOUSEHOLD APPLIANCES, TOOLS AND SIMILAR APPARATUS PRODUCT FAMILY STANDARD |
| 11/30245183 DC : 0 | BS EN 62115 PRAB - ELECTRIC TOYS - SAFETY |
| EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements |
| BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
| BS EN 60044-7:2000 | Instrument transformers Electronic voltage transformers |
| BS EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) Generic standards. Immunity for residential, commercial and light-industrial environments |
| 12/30241725 DC : 0 | BS ISO 28057 - DOSIMETRY WITH SOLID THERMOLUMINSCENCE DETECTORS FOR PHOTON AND ELECTRON RADIATIONS IN RADIOTHERAPY |
| 13/30260741 DC : 0 | BS EN 50270 - ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| BS EN 60947-5-3:2013 | Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| CEI EN 60325 : 2005 | RADIATION PROTECTION INSTRUMENTATION - ALPHA, BETA AND ALPHA/BETA (BETA ENERGY > 60 KEV) CONTAMINATION METERS AND MONITORS |
| BS EN 50370-2:2003 | Electromagnetic compatibility (EMC). Product family standard for machine tools Immunity |
| BS EN 62115 : 2005 | ELECTRIC TOYS - SAFETY |
| 14/30291768 DC : 0 | BS EN 1434-4 - HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| S.R. CLC/TS 62603-1:2014 | INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS |
| 18/30368636 DC : 0 | BS EN 12016 - ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY |
| CEI EN 62041 : 2012 | SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - EMC REQUIREMENTS |
| 04/30115154 DC : DRAFT JUN 2004 | EN 50412-1 - IMMUNITY REQUIREMENTS FOR POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT |
| BS EN 62387-1:2012 | Radiation protection instrumentation. Passive integrating dosimetry systems for environmental and personal monitoring General characteristics and performance requirements |
| BS EN 61326-1:2013 | Electrical equipment for measurement, control and laboratory use. EMC requirements General requirements |
| 04/30113789 DC : DRAFT MAY 2004 | EN 60846 - RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION |
| BS EN 62974-1:2017 | Monitoring and measuring systems used for data collection, gathering and analysis Device requirements |
| CEI EN 61000-4-29 : 2001 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-29: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS ON D.C. INPUT POWER PORTS, IMMUNITY TESTS |
| BS EN 12405-2:2012 | Gas meters. Conversion devices Energy conversion |
| BS EN 62689-1:2016 | Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements |
| BS EN 60601-1-2:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests |
| DIN EN 12405-3 E : 2016 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| BS EN 62041:2010 | Safety of transformers, reactors, power supply units and combinations thereof. EMC requirements |
| BS EN 61326-3-2:2008 | Electrical equipment for measurement, control and laboratory use. EMC requirements Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applications with specified electromagnetic environment |
| NF ETS 300717 : 2000 | |
| CEI EN 50370-2 : 2004 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR MACHINE TOOLS - PART 2: IMMUNITY |
| UNE-EN 62974-1:2018 | Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements |
| 04/19986707 DC : 0 | BS EN 1804-4 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 4: ELECTRO-HYDRAULIC CONTROL SYSTEMS |
| UNE-EN 50130-4:2011 | Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems |
| UNE-EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
| BS EN 61326:1998 | Electrical equipment for measurement, control and laboratory use. EMC requirements |
| CEI EN 61850-3 : 2014 | COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 3: GENERAL REQUIREMENTS |
| BS EN 61298-3:2008 | Process measurement and control devices. General methods and procedures for evaluating performance Tests for the effects of influence quantities |
| BS EN 62386-101:2014 | Digital addressable lighting interface General requirements. System components |
| PREN 45501 : DRAFT 2011 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| I.S. EN 50160:2010 | VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
| I.S. EN 12405-2:2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| BS EN 50470-1 : 2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| BS EN 55014-2:2015 | Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus Immunity. Product family standard |
| I.S. EN 50370-2:2003 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR MACHINE TOOLS - PART 2: IMMUNITY |
| I.S. EN 62689-1:2016 | CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS |
| I.S. EN 61812-1:2011 | TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS |
| PREN 298 : DRAFT 2010 | AUTOMATIC BURNER CONTROL SYSTEMS FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS |
| CEI EN 61674 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMI-CONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING |
| 15/30298562 DC : 0 | BS EN 16867 - BUILDING HARDWARE - MECHATRONIC DOOR FURNITURE - REQUIREMENTS AND TEST METHODS |
| I.S. EN 50130-4:2011 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| 15/30298547 DC : 0 | BS EN 14846 - BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 60669-2-1:2004 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES |
| I.S. EN 50412-2-1:2009 | POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS |
| I.S. EN 61000-4-1:2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES |
| I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50490:2008 | ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS |
| I.S. EN 60580:2000 | MEDICAL ELECTRICAL EQUIPMENT - DOSE AREA PRODUCT METERS |
| I.S. EN 12405-1:2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 60439-1:2000 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| DIN EN 809:2012-10 | Pumps and pump units for liquids - Common safety requirements |
| DIN EN 45501:2016-03 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| DIN EN 298:2012-11 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
| BS EN 60947-2:2017+A1:2020 | Low-voltage switchgear and controlgear Circuit-breakers |
| EN 60580:2000 | Medical electrical equipment - Dose area product meters |
| BS EN 60204-31:2013 | Safety of machinery. Electrical equipment of machines Particular safety and EMC requirements for sewing machines, units and systems |
| UNE-EN 61000-6-5:2016 | Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment |
| BS EN 12067-2:2004 | Gas/air ratio controls for gas burners and gas burning appliances Electronic types |
| BS EN 12952-11:2007 | Water-tube boilers and auxiliary installations Requirements for limiting devices of the boiler and accessories |
| BS EN 12953-9:2007 | Shell boilers Requirements for limiting devices of the boiler and accessories |
| EN 60947-5-2:2007/A1:2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007/A1:2012) |
| EN 61000-4-25 : 2002 AMD 1 2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-25: TESTING AND MEASUREMENT TECHNIQUES - HEMP IMMUNITY TEST METHODS FOR EQUIPMENT AND SYSTEMS (IEC 61000-4-25:2001/A1:2012) |
| UNE-EN 12016:2014 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
| UNE-EN 50065-2-3:2004 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors |
| BS EN 12016:2013 | Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Immunity |
| BS EN 230:2005 | Automatic burner control systems for oil burners |
| BS EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances. Valve proving systems for automatic shut-off valves |
| UNE-EN 62115:2006 | Electric toys - Safety (IEC 62115:2003 + A1:2004, modified) |
| BS EN 60439-1:1999 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies |
| BS EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| BS EN 14143:2013 | Respiratory equipment. Self-contained re-breathing diving apparatus |
| UNE-EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| BS EN 60669-2-1 : 2004 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 2-1: PARTICULAR REQUIREMENTS - ELECTRONIC SWITCHES |
| UNE-EN 60335-1:2012 | Household and similar electrical appliances - Safety - Part 1: General requirements |
| UNE-EN 60204-31:2013 | Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems |
| UNE-EN 55014-2:2015 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
| UNE-EN 14143:2014 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| EN 61204-3:2000 | Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) |
| EN 61526:2013 | Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters |
| EN 13637:2015 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| EN 14154-2:2005+A2:2011 | Water meters - Part 2: Installation and conditions of use |
| EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| EN 14143:2013 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| EN 14846:2008 | Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
| EN 14154-3:2005+A2:2011 | Water meters - Part 3: Test methods and equipment |
| EN 230:2005 | Automatic burner control systems for oil burners |
| EN 1643:2014 | Safety and control devices for gas burners and gas burning appliances - Valve proving systems for automatic shut-off valves |
| BS EN 50165:1997 | Electrical equipment of non-electric appliances for household and similar purposes. Safety requirements |
| BS EN 61000-4-29:2001 | Electromagnetic compatibility (EMC). Testing and measurement techniques Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests - Voltage dips, short interruptions and voltage variations on d.c.input power ports. Immunity tests. Basic EMC Publication. |
| TS 102 121 : 1.3.1 | ENVIRONMENTAL ENGINEERING (EE); POWER DISTRIBUTION TO TELECOMMUNICATIONS AND DATACOM (ICT) EQUIPMENT |
| TR 103 400 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); IMPACT OF CENELEC EN 55035 ON ETSI EMC STANDARDS |
| BS EN 1434-4 : 2015 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| BS EN 60255-26:2013 | Measuring relays and protection equipment Electromagnetic compatibility requirements |
| 03/111744 DC : DRAFT JULY 2003 | |
| BS EN 61131-9:2013 | Programmable controllers Single-drop digital communication interface for small sensors and actuators (SDCI) |
| I.S. EN 62282-3-201:2017 | FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS |
| I.S. EN 50065-2-3:2003 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-3: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 3 KHZ TO 95 KHZ AND INTENDED FOR USE BY ELECTRICITY SUPPLIERS AND DISTRIBUTORS |
| BS EN 62488-2:2017 | Power line communication systems for power utility applications Analogue power line carrier terminals or APLC |
| EN 61851-22:2002 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
| PREN 12016 : DRAFT 2018 | ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR LIFTS, ESCALATORS AND MOVING WALKS - IMMUNITY |
| I.S. EN 230:2005 | AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| BS EN 60255-11:2010 | Measuring relays and protection equipment Voltage dips, short interruptions, variations and ripple on auxiliary power supply port |
| BS EN 61850-3:2014 | Communication networks and systems for power utility automation General requirements |
| BS EN 61514-2:2013 | Industrial process control systems Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly |
| BS EN 50065-2-1:2003 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments |
| 10/30213584 DC : 0 | BS EN 14143 - RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| BS EN 61000-6-5:2015 | Electromagnetic compatibility (EMC) Generic standards. Immunity for equipment used in power station and substation environment |
| 09/30200143 DC : 0 | BS EN 62080 - SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
| DIN EN 14846 E : 2008 | BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
| BS EN 50491-5-1:2010 | General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) EMC requirements, conditions and test set-up |
| BS EN 60846:2004 | Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation |
| I.S. EN 60770-1:2011 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
| I.S. EN 62080:2009 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES |
| I.S. EN 62974-1:2017 | MONITORING AND MEASURING SYSTEMS USED FOR DATA COLLECTION, GATHERING AND ANALYSIS - PART 1: DEVICE REQUIREMENTS |
| BS EN 60580:2000 | Dose area product meters |
| NF EN 12405-1 : 2005 + A2 2010 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| BS EN 61547:2009 | Equipment for general lighting purposes. EMC immunity requirements |
| BS EN 60947-5-9:2007 | Low-voltage switchgear and controlgear Control circuit devices and switching elements. Flow rate switches |
| PREN 50130-4 : DRAFT 2010 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD - IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER AND SOCIAL ALARM SYSTEMS |
| I.S. EN 60861:2008 | EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS |
| UNE-EN 12405-2:2013 | Gas meters - Conversion devices - Part 2: Energy conversion |
| NF EN 50491-5-1 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP |
| DIN EN 1434-4:2016-02 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| 03/306642 DC : DRAFT APR 2003 | EN 230 - AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| 07/30169926 DC : DRAFT AUG 2007 | BS EN 50490 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - TECHNICAL REQUIREMENTS FOR AERONAUTICAL GROUND LIGHTING CONTROL AND MONITORING SYSTEMS - UNITS FOR SELECTIVE SWITCHING AND MONITORING OF INDIVIDUAL LAMPS |
| CSA C900.4 : 2013 | HEAT METERS - PART 4: PATTERN APPROVAL TESTS |
| CEI EN 50412-2-1 : 2006 | POWER LINE COMMUNICATION APPARATUS AND SYSTEMS USED IN LOW-VOLTAGE INSTALLATIONS IN THE FREQUENCY RANGE 1,6 MHZ TO 30 MHZ - PART 2-1: RESIDENTIAL, COMMERCIAL AND INDUSTRIAL ENVIRONMENT - IMMUNITY REQUIREMENTS |
| I.S. EN 61204-3:2000 | LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 3: ELECTROMAGNETIC COMPATIBILITY (EMC) |
| DIN EN 13637:2015-12 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 60947-5-9:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-9: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - FLOW RATE SWITCHES |
| I.S. EN 60044-8:2002 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| CEI EN 50491-5-1 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP |
| EN 55035:2017 | Electromagnetic compatibility of multimedia equipment - Immunity requirements |
| I.S. EN 60947-1:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| I.S. EN 55103-2:2009 | ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR AUDIO, VIDEO, AUDIO-VISUAL AND ENTERTAINMENT LIGHTING CONTROL APPARATUS FOR PROFESSIONAL USE - PART 2: IMMUNITY |
| NF ETS 300 329 : 1999 | |
| EN 50470-1:2006 | Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C) |
| I.S. EN 61298-3:2008 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES |
| I.S. EN 61131-9:2013 | PROGRAMMABLE CONTROLLERS - PART 9: SINGLE-DROP DIGITAL COMMUNICATION INTERFACE FOR SMALL SENSORS AND ACTUATORS (SDCI) |
| NF EN 300339 : 2000 | |
| I.S. EN 60947-5-1:2017 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
| I.S. EN 55024:2010 | INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT |
| I.S. EN 62387:2016 | RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION |
| PREN 50270 : DRAFT 2013 | ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
| I.S. EN 60255-26:2013 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS (IEC 60255-26:2013 (EQV)) |
| BS EN 50160 : 2010 | VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
| UNE-EN 62041:2011 | Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements |
| NF EN 50130-4 : 2014 AMD 1 2014 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| EN 62920:2017 | Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment |
| 17/30356731 DC : 0 | BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| CEI EN 55103-2 : 2010 | ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD FOR AUDIO, VIDEO, AUDIOVISUAL AND ENTERTAINMENT LIGHTING CONTROL APPARATUS FOR PROFESSIONAL USE - PART 2: IMMUNITY |
| EN 50160 : 2010 AMD 1 2015 | VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
| I.S. EN 50293:2012 | ROAD TRAFFIC SIGNAL SYSTEMS - ELECTROMAGNETIC COMPATIBILITY |
| I.S. EN 55035:2017 | ELECTROMAGNETIC COMPATIBILITY OF MULTIMEDIA EQUIPMENT - IMMUNITY REQUIREMENTS |
| BS EN 809:1998+A1:2009 | Pumps and pump units for liquids. Common safety requirements |
| I.S. EN 61000-6-2:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005 (EQV)) |
| I.S. EN 62271-1:2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR |
| I.S. EN 61526:2013 | RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS H[P](10) AND H[P](0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS (IEC 61526:2010 (MOD)) |
| I.S. EN 50240:2006 | |
| I.S. EN 50491-5-1:2010 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP |
| I.S. EN 61676:2003 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETRIC INSTRUMENTS USED FOR NON-INVASIVE MEASUREMENT OF X-RAY TUBE VOLTAGE IN DIAGNOSTIC RADIOLOGY |
| EN 61800-3 : 2004 AMD 1 2012 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011) |
| DIN EN 12405-1:2011-04 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| UNE-EN 61439-1:2012 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| BS EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies General rules |
| BS EN 50090-2-2 : 1997 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
| EN 50065-2-1 : 2003 AMD 1 2005 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-1: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRIAL ENVIRONMENTS |
| DIN EN 14154-3:2011-06 | WATER METERS - PART 3: TEST METHODS AND EQUIPMENT |
| EN 61676:2002/A1:2009 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETRIC INSTRUMENTS USED FOR NON-INVASIVE MEASUREMENT OF X-RAY TUBE VOLTAGE IN DIAGNOSTIC RADIOLOGY |
| EN 50065-2-2:2003/A1:2005/corrigendum Oct. 2006 | SIGNALING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 2-2: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 95 KHZ TO 148,5 KHZ AND INTENDED FOR USE IN INDUSTRIAL ENVIRONMENTS |
| EN 12016:2013 | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
| EN 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| EN 55104 : 1995 | ELECTROMAGNETIC COMPATIBILITY - IMMUNITY REQUIREMENTS FOR HOUSEHOLD APPLIANCES, TOOLS AND SIMILAR APPARATUS - PRODUCT FAMILY STANDARD |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| EN 61000-4-1:2007 | Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
| EN 50065-2-3 : 2003 AMD 1 2005 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148.5 KHZ - PART 2-3: IMMUNITY REQUIREMENTS FOR MAINS COMMUNICATIONS EQUIPMENT AND SYSTEMS OPERATING IN THE RANGE OF FREQUENCIES 3 KHZ TO 95 KHZ AND INTENDED FOR USE BY ELECTRICITY SUPPLIERS AND DISTRIBUTORS |
| EN 62282-3-201:2017 | Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems |
| EN 55103-2:2009 | Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity |
| EN 61326:1997/A3:2003 | |
| EN 60325:2004 | Radiation protection instrumentation - Alpha, beta and alpha/beta (beta energy > 60 keV) contamination meters and monitors |
| EN 55024 : 2010 AMD 1 2015 | INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 24:2010/A1:2015) |
| EN 50090-2-2:1996/A2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
| EN 62041:2010 | Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements |
| EN 62115:2005/A12:2015 | ELECTRIC TOYS - SAFETY (IEC 62115:2003 + A1:2004, MODIFIED) |
| EN 60204-31:2013 | Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems |
| EN 12405-3 : 2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| EN 12953-9:2007 | Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
| EN 62022 : 2007 | INSTALLED MONITORS FOR THE CONTROL AND DETECTION OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES |
| EN 60846:2004 | Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation |
| EN 60439-1:1999/A1:2004 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| EN 60255-11:2010 | Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port |
| EN 61674:2013 | Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| EN 50491-5-2:2010 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment |
| EN 62135-2:2015 | Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements |
| EN 60861:2008 | Equipment for monitoring of radionuclides in liquid effluents and surface waters |
| EN 50370-2:2003 | Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity |
| EN 50491-5-1:2010 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up |
| EN 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| EN 50240:2004/corrigendum:2005 | |
| EN 45501 : 2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| EN 50270:2015 | Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| EN 60255-26:2013/AC:2013 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 26: ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS |
| EN 61812-1:2011 | Time relays for industrial and residential use - Part 1: Requirements and tests |
| EN 60947-5-9:2007 | Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches |
| EN 60974-10:2014/A1:2015 | ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS (IEC 60974-10:2014/A1:2015) |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| EN 61131-9 : 2013 | Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) |
| UNE-EN 809:1999 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| IEC 61000-2-4:2002 | Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances |
| IEC TR 60725:2012 | Consideration of reference impedances and public supply network impedances for use in determining the disturbance characteristics of electrical equipment having a rated current ≤75 A per phase |
| IEC 61000-4-14:1999+AMD1:2001+AMD2:2009 CSV | Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase |
| IEC TR 61000-2-8:2002 | Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.