EN 61547:2009
Current
Current
The latest, up-to-date edition.
Equipment for general lighting purposes - EMC immunity requirements
Published date
12-08-2009
1 Scope
2 Normative references
3 Terms and definitions
4 Performance criteria
5 Test specifications
6 Application of test specifications
7 Conditions during testing
8 Assessment of conformity
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Annex ZZ (informative) - Coverage of Essential Requirements
of EC Directives
IEC 61547:2009 for electromagnetic immunity requirements applies to lighting equipment which is within the scope of IEC Technical Committee 34, such as lamps, auxiliaries and luminaires, intended either for connecting to a low voltage electricity supply or for battery operation. Excluded from the scope of this standard is equipment for which the immunity requirements are formulated in other IEC or CISPR standards. The main reason for this revision is to update the dates of the references to the basic standards which also required some editorial changes in the tables.
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 61547 : 2010 COR 1 2010 | Identical |
| BS EN 61547:2009 | Identical |
| IEC 61547:2009 | Identical |
| VDE 0875-15-2 : 2010 COR 1 2010 | Identical |
| SN EN 61547 : 1995 AMD 1 2000 | Identical |
| PN EN 61547 : 2009 | Identical |
| NEN 11547 : 1995 | Identical |
| DIN EN 61547 Beiblatt 1:2018-09 | Identical |
| CEI EN 61547/A1:2001 | Identical |
| UNE-EN 61547:2011 | Identical |
| NF EN 61547 : 2009 | Identical |
| VDE 0875-15-2 Beiblatt 1:2018-09 | Identical |
| I.S. EN 61547:2009 | Identical |
| NBN EN 61547 : 2009 | Identical |
| CEI EN 61547 : 2010 | Identical |
| NEN EN IEC 61547 : 2009 | Identical |
| I.S. EN 61547:2009+COR 1:2015 | Identical |
| DS EN 61547 : 2009 | Identical |
| CEI EN 62733 : 2017 | PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS |
| BS EN 62386-205:2009 | Digital addressable lighting interface Particular requirements for control gear. Supply voltage controller for incandescent lamps (device type 4) |
| I.S. EN 62386-210:2011 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 210: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SEQUENCER (DEVICE TYPE 9) (IEC 62386-210:2011 (EQV)) |
| BS EN 50107:1998 | Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV |
| I.S. EN 62733:2015 | PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS |
| BS EN 60929 : 2011 | AC AND/OR DC-SUPPLIED ELECTRONIC CONTROL GEAR FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
| EN IEC 61347-2-14:2018 | Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps |
| BS EN 62733:2015 | Programmable components in electronic lamp controlgear. General and safety requirements |
| EN 62733:2015/AC:2017-09 | PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS |
| EN 62386-207 : 2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 207: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - LED MODULES (DEVICE TYPE 6) |
| EN 61347-2-13:2014/A1:2017 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
| EN 62386-103:2014 | Digital addressable lighting interface - Part 103: General requirements - Control devices |
| EN 60925:1991/A2:2001 | SPECIFICATION FOR PERFORMANCE REQUIREMENTS FOR D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS |
| EN 60927:2007/A1:2013 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS (IEC 60927:2007/A1:2013 (34C/951/CDV)) |
| EN 62386-204 : 2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 204: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - LOW VOLTAGE HALOGEN LAMPS (DEVICE TYPE 3) |
| EN 62386-209 : 2011 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 209: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - COLOUR CONTROL (DEVICE TYPE 8) |
| EN 62386-205 : 2009 | Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4) |
| I.S. EN 60925:1992 | D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
| BS EN 62386-210:2011 | Digital addressable lighting interface Particular requirements for control gear. Sequencer (device type 9) |
| BS EN 62386-202:2009 | Digital addressable lighting interface Particular requirements for control gear. Self-contained emergency lighting (device type 1) |
| BS EN 62386-207:2009 | Digital addressable lighting interface Particular requirements for control gear. LED modules (device type 6) |
| EN 303 446-1 : 1.1.0 DRAFT | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR COMBINED AND/OR INTEGRATED RADIO AND NON-RADIO EQUIPMENT; PART 1: REQUIREMENTS FOR EQUIPMENT INTENDED TO BE USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY LOCATIONS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU |
| BS EN 60925:1991 | Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps |
| DIN EN 50107 : 1998 | SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1 KV BUT NOT EXCEEDING 10 KV |
| ENV 50234 : DRAFT 1997 | AVIATION GROUND LIGHTING ELECTRICAL INSTALLATION - FLASHING LIGHTS: EQUIPMENT SPECIFICATIONS AND TESTS |
| I.S. EN 61347-2-3:2011 | LAMP CONTROL GEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS |
| CEI EN 62034 : 2013 | AUTOMATIC TEST SYSTEMS FOR BATTERY POWERED EMERGENCY ESCAPE LIGHTING |
| BS EN 60927 : 2007 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS |
| BS EN 61347-2-3:2011 | Lamp control gear Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps |
| CEI EN 61347-2-3 : 2012 | LAMP CONTROLGEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS |
| UNE-EN 62722-2-1:2016 | Luminaire performance - Part 2-1: Particular requirements for LED luminaires |
| EN 62386-102:2014 | Digital addressable lighting interface - Part 102: General requirements - Control gear |
| VDE 0128 : 1998 | SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD RATED OUTPUT VOLTAGE EXCEEDING 1 KV BUT NOT EXCEEDING 10 KV |
| VDE V 0161-234 : 1998 | Aviation ground lighting electric installation - Flashing lights Equipment specifications and tests; |
| DIN V ENV 50234 : 1998 | AERONAUTICAL GROUND LIGHTING ELECTRICAL INSTALLATION - FLASHING LIGHTS - EQUIPMENT SPECIFICATIONS AND TESTS |
| BS EN 62811:2015 | AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps). Performance requirements for low frequency squarewave operation |
| BS EN 62034:2012 | Automatic test systems for battery powered emergency escape lighting |
| BS EN 62386-203:2009 | Digital addressable lighting interface Particular requirements for control gear. Discharge lamps (excluding fluorescent lamps) (device type 2) |
| UNE-EN 61347-2-3:2012 | Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps |
| DIN 57128 : 1981 | |
| BS EN 62386-103:2014+A1:2018 | Digital addressable lighting interface General requirements. Control devices |
| CLC/TR 50627:2015 | Study Report on Electromagnetic Interference between Electrical Equipment/Systems in the Frequency Range Below 150 kHz |
| S.R. CLC/TR 50627:2015 | STUDY REPORT ON ELECTROMAGNETIC INTERFERENCE BETWEEN ELECTRICAL EQUIPMENT/SYSTEMS IN THE FREQUENCY RANGE BELOW 150 KHZ |
| EN 62386-101:2014 | Digital addressable lighting interface - Part 101: General requirements - System components |
| UNE-EN 61347-2-13:2015 | Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules |
| EN 62384:2006/A1:2009 | DC OR AC SUPPLIED ELECTRONIC CONTROL GEAR FOR LED MODULES - PERFORMANCE REQUIREMENTS |
| DD ENV 50234:1997 | Aeronautical ground lighting electrical installation. Flashing lights. Equipment specifications and tests |
| BS EN 62386-208:2009 | Digital addressable lighting interface Particular requirements for control gear. Switching function (device type 7) |
| PD CLC/TR 50627:2015 | Study Report on Electromagnetic Interference between Electrical Equipment/Systems in the Frequency Range Below 150 kHz |
| BS EN 62386-209:2011 | Digital addressable lighting interface Particular requirements for control gear. Colour control (device type 8) |
| BS EN 62386-101:2014 | Digital addressable lighting interface General requirements. System components |
| BS EN 62384 : 2006 | DC OR AC SUPPLIED ELECTRONIC CONTROL GEAR FOR LED MODULES - PERFORMANCE REQUIREMENTS |
| I.S. EN 62034:2012 | AUTOMATIC TEST SYSTEMS FOR BATTERY POWERED EMERGENCY ESCAPE LIGHTING (IEC 62034:2012 (EQV)) |
| BS EN 61347-2-13 : 2014 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES (IEC 61347-2-13:2014) |
| IEC 60925:1989+AMD1:1996+AMD2:2001 CSV | DC supplied electronic ballasts for tubular fluorescent lamps - Performance requirements |
| I.S. EN IEC 61347-2-14:2018 | LAMP CONTROLGEAR - PART 2-14: PARTICULAR REQUIREMENTS FOR DC AND/OR AC SUPPLIED ELECTRONIC CONTROLGEAR FOR FLUORESCENT INDUCTION LAMPS |
| BS EN 62386-206:2009 | Digital addressable lighting interface Particular requirements for control gear. Conversion from digital signal into d.c. voltage (device type 5) |
| BS EN 62386-204:2009 | Digital addressable lighting interface Particular requirements for control gear. Low voltage halogen lamps (device type 3) |
| I.S. EN 60927:2008 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS |
| TR 102 070-1 : 1.2.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); GUIDE TO THE APPLICATION OF HARMONIZED STANDARDS TO MULTI-RADIO AND COMBINED RADIO AND NON-RADIO EQUIPMENT; PART 1: ELECTROMAGNETIC COMPATIBILITY |
| I.S. EN 61347-2-13:2014 | LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES |
| EN 62386-210:2011 | Digital addressable lighting interface - Part 210: Particular requirements for control gear - Sequencer (device type 9) |
| EN 62386-208:2009 | Digital addressable lighting Interface - Part 208: Particular requirements for control gear - Switching function (device type 7) |
| EN 62386-202 : 2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 202: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SELF-CONTAINED EMERGENCY LIGHTING (DEVICE TYPE 1) |
| EN 62386-203:2009 | Digital addressable lighting interface - Part 203: Particular requirements for control gear - Discharge lamps (excluding fluorescent lamps) (device type 2) |
| EN 62034:2012 | Automatic test systems for battery powered emergency escape lighting |
| EN 60929:2011/A1:2016 | AC AND/OR DC-SUPPLIED ELECTRONIC CONTROL GEAR FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS |
| EN 62386-206:2009 | Digital addressable lighting interface - Part 206: Particular requirements for control gear - Conversion from digital signal into d. c. voltage (device type 5) |
| EN 61347-2-3:2011/A1:2017 | LAMP CONTROL GEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS (IEC 61347-2-3:2011/A1:2016) |
| EN 50107:1998 | Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV |
| EN 62811:2015 | AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency squarewave operation |
| IEC 61000-4-8 : 2.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
| EN 61000-4-11:2004/A1:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017) |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| IEC 60050-845:1987 | International Electrotechnical Vocabulary (IEV) - Part 845: Lighting |
| IEC 61000-6-1 : 3.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| 2004/108/EC : 2004 | DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-6 : 4.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| EN 61000-4-8:2010 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
| IEC 60598-2-22:2014+AMD1:2017 CSV | Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting |
| EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
| EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| EN 60598-2-22:2014/AC:2016-09 | LUMINAIRES - PART 2-22: PARTICULAR REQUIREMENTS - LUMINAIRES FOR EMERGENCY LIGHTING (IEC 60598-2-22:2014/COR2:2016) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.