EN 61760-1:2006
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SURFACE MOUNTING TECHNOLOGY - PART 1: STANDARD METHOD FOR THE SPECIFICATION OF SURFACE MOUNTING COMPONENTS (SMDS)
Superseded date
29-10-2020
Published date
12-01-2013
INTRODUCTION
1 Scope and object
1.1 Scope
1.2 Object
2 Normative references
3 Terms and definitions
4 Requirements for component design and component
specifications
4.1 General requirement
4.2 Packaging
4.3 Labelling of product packaging
4.4 Component marking
4.5 Storage and transportation
4.6 Component outline and design
4.7 Mechanical stress
4.8 Component reliability assurance
4.9 Additional requirements for compatibility with
lead-free soldering
5 Specification of assembly process conditions
5.1 General
5.2 Securing the component on the substrate prior
to soldering
5.3 Mounting methods
5.4 Cleaning (where applicable)
5.5 Removal and/or replacement of SMDs
6 Typical process conditions
6.1 Soldering processes, temperature/time profiles
6.2 Typical cleaning conditions for assemblies
7 Requirements for components and component specifications
related to suitability with various mounting processes
7.1 General
7.2 Wettability
7.3 Resistance to dissolution of metallization
7.4 Resistance to soldering heat
7.5 Resistance to cleaning solvent
7.6 Soldering profiles
7.7 Bonding strength test for the component glue interface
test
Bibliography
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Provides a reference set of process conditions and related test conditions to be used when compiling component specifications of electronic components that are intended for usage in surface mount technology.
| Committee |
SR 91
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| OVE/ONORM EN 61760-1 : 2006 | Identical |
| IEC 61760-1:2006 | Identical |
| NBN EN 61760-1 : 2007 | Identical |
| NEN EN IEC 61760-1 : 2006 | Identical |
| I.S. EN 61760-1:2006 | Identical |
| PN EN 61760-1 : 2006 | Identical |
| SN EN 61760-1 : 1998 | Identical |
| UNE-EN 61760-1:2006 | Identical |
| BS EN 61760-1:2006 | Identical |
| CEI EN 61760-1 : 2007 | Identical |
| NF EN 61760-1 : 2014 | Identical |
| DIN EN 61760-1:2006-10 | Identical |
| CEI EN 62137-1-4 : 2010 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-4: CYCLIC BENDING TEST |
| I.S. EN 62137-1-5:2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINTS - PART 1-5: MECHANICAL SHEAR FATIGUE TEST |
| I.S. EN 61810-1:2015 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| 14/30311384 DC : 0 | BS EN 60115-2:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS |
| 06/30155911 DC : DRAFT SEP 2006 | BS EN 140401-801 - DETAIL SPECIFICATION - FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1 |
| BS EN 61188-5-1:2002 | Printed boards and assemblies. Design and use. Attachment (land/joint) considerations Attachment (land/joint) considerations. Generic requirements |
| BS EN 140101:2008 | Blank Detail Specification. Fixed low power film resistors |
| I.S. EN 60738-1:2006 | THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION |
| I.S. EN 62137-1-4:2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-4: CYCLIC BENDING TEST |
| I.S. EN 140402:2015 | BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS |
| I.S. EN 140402-801:2015 | DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2 |
| EN 61188-5-1:2002 | Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic requirements |
| EN 62137-1-2:2007 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test |
| EN 62137-1-4:2009 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test |
| EN 140402-801:2015 | Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2 |
| EN 60068-3-13:2016 | Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering |
| EN 140101:2008 | Blank Detail Specification: Fixed low power film resistors |
| EN 62137-1-3:2009 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test |
| EN 60738-1:2006/A1:2009 | THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION |
| EN 61188-5-6:2003 | Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations - Chip carriers with J-leads on four sides |
| EN 62137-1-5:2009 | Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5: Mechanical shear fatigue test |
| EN 60115-2:2015 | Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors |
| EN 140401:2009 | Blank Detail Specification: Fixed low power film surface mount (SMD) resistors |
| EN 140402:2015/A1:2016 | BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS |
| BS EN 60738-1 : 2006 | THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION |
| CEI EN 62137-1-5 : 2010 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-5: MECHANICAL SHEAR FATIGUE TEST |
| BS EN 60115-8-1:2015 | Fixed resistors for use in electronic equipment Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G |
| BS EN 62137-1-5:2009 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joints Mechanical shear fatigue test |
| CEI EN 61810-1 : 2016 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| BS EN 60115-1 : 2011 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| I.S. EN 60115-8-1:2015 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G |
| I.S. EN 60115-8:2012 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS (IEC 60115-8:2009 (MOD)) |
| I.S. EN 60068-2-82:2007 | ENVIRONMENTAL TESTING - PART 2-82: TESTS - TEST TX: WHISKER TEST METHODS FOR ELECTRONIC AND ELECTRIC COMPONENTS |
| I.S. EN 140401:2009 | BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS |
| CEI EN 60068-2-58 : 2016 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
| I.S. EN 61188-5-4:2007 | PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES - DESIGN AND USE - PART 5-4: ATTACHMENT (LAND/JOINT) CONSIDERATIONS - COMPONENTS WITH J LEADS ON TWO SIDES |
| I.S. EN 140100:2008 | SECTIONAL SPECIFICATION: FIXED LOW POWER FILM RESISTORS |
| CEI EN 60068-3-13 : 1ED 2017 | ENVIRONMENTAL TESTING - PART 3-13: SUPPORTING DOCUMENTATION AND GUIDANCE ON TEST T - SOLDERING |
| BS EN 62137-1-3:2009 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Cyclic drop test |
| BS EN 60115-2:2015 | Fixed resistors for use in electronic equipment Sectional specification: Leaded fixed low power film resistors |
| CEI EN 60115-8-1 : 2016 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G |
| BS EN 140401-801 : 2007 | DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1 |
| BS EN 140401-803 : 2007 | DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2 |
| BS EN 62314:2006 | Solid-state relays |
| BS EN 61188-5-4:2007 | Printed boards and printed board assemblies. Design and use Attachments (land/joint) considerations. Components with J leads on two sides |
| BS EN 62137-1-2:2007 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Shear strength test |
| I.S. EN 60115-2:2015 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS |
| BS EN 60512-16-21:2012 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16u. Whisker test via the application of external mechanical stresses |
| 06/30155905 DC : DRAFT SEP 2006 | BS EN 140401-803 - DETAIL SPECIFICATION - FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2 |
| 14/30317306 DC : 0 | BS EN 60115-8-1:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT (SMD) LOW POWER FILM RESISTORS FOR GENERAL ELECTRONIC EQUIPMENT, CLASSIFICATION LEVEL G |
| BS EN 140402 : 2015 | BLANK DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS |
| I.S. EN 140401-804:2011 | DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25 |
| I.S. EN 61188-5-6:2003 | PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES - DESIGN AND USE ATTACHMENT (LAND/JOINT) CONSIDERATIONS - CHIP CARRIERS WITH J-LEADS ON FOUR SIDES |
| I.S. EN 140101-806:2009 | DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS |
| BS EN 140401:2009 | Blank Detail Specification. Fixed low power film surface mount (SMD) resistors |
| BS EN 140401-804 : 2011 | DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25 |
| I.S. EN 62137-1-2:2007 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-2: SHEAR STRENGTH TEST |
| I.S. EN 60115-1:2011 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 60115-1:2008, MODIFIED) |
| EN 140401-804:2011/A1:2013 | DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25 |
| BS EN 140100:2008 | Sectional specification. Fixed low power film resistors |
| 10/30237986 DC : 0 | BS EN 140401-804 - DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25 |
| 08/30186808 DC : DRAFT JULY 2008 | BS EN 140401 - BLANK DETAIL SPECIFICATION - FIXED LOW POWER NON-WIRE-WOUND SURFACE MOUNT (SMD) RESISTORS |
| CEI EN 62137-1-3 : 2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-3: CYCLIC DROP TEST |
| BS EN 140401-802 : 2007 | DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2 |
| BS EN 60068-3-13:2016 | Environmental testing Supporting documentation and guidance on Test T. Soldering |
| CEI EN 62314 : 2007 | SOLID-STATE RELAYS |
| BS EN 62137-1-4:2009 | Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Cyclic bending test |
| BS EN 60068-2-82:2007 | Environmental testing Tests. Test Tx. Whisker test methods for electronic and electric components |
| BS EN 61810-1:2015 | Electromechanical elementary relays General and safety requirements |
| EN 61810-1:2015/AC:2018-04 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS (IEC 61810-1:2015/COR1:2018) |
| I.S. EN 60068-3-13:2016 | ENVIRONMENTAL TESTING - PART 3-13: SUPPORTING DOCUMENTATION AND GUIDANCE ON TEST T - SOLDERING |
| I.S. EN 60512-16-21:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-21: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16U: WHISKER TEST VIA THE APPLICATION OF EXTERNAL MECHANICAL STRESSES (IEC 60512-16-21:2012 (EQV)) |
| EN 140401-802:2007/A3:2017 | DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2 |
| I.S. EN 140101:2008 | BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS |
| I.S. EN 62137-1-3:2009 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-3: CYCLIC DROP TEST |
| I.S. EN 140401-802:2007 | DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 1; 2 |
| I.S. EN 140401-803:2007 | DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2 |
| I.S. EN 61188-5-1:2002 | PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES - DESIGN AND USE - PART 5-1: ATTACHMENT (LAND/JOINT) CONSIDERATIONS - GENERIC REQUIREMENTS |
| EN 60115-1:2011/A11:2015 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| BS EN 61188-5-6:2003 | Printed boards and assemblies. Design and use. Attachment (land/joint) considerations Chip carriers with J-leads on four sides |
| BS EN 140402-801:2015 | Detail specification: Fixed low power wirewound surface mount (SMD) resistors. Rectangular. Stability classes 0,5; 1; 2 |
| BS EN 60068-2-58 : 2015 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
| BS EN 62137-4:2014 | Electronics assembly technology Endurance test methods for solder joint of area array type package surface mount devices |
| CEI EN 62391-1 : 2016 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| CEI EN 60068-2-82 : 2008 | ENVIRONMENTAL TESTING - PART 2-82: TESTS - TEST TX: WHISKER TEST METHODS FOR ELECTRONIC AND ELECTRIC COMPONENTS |
| CEI EN 60115-2 : 2016 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS |
| CEI EN 140401 : 2009 | BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM SURFACE MOUNT (SMD) RESISTORS |
| BS EN 60115-8:2012 | Fixed resistors for use in electronic equipment Sectional specification. Fixed surface mount resistors |
| CEI EN 60115-8 : 2013 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS |
| CEI EN 62137-1-2 : 2008 | SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-2: SHEAR STRENGTH TEST |
| 05/30129971 DC : DRAFT FEB 2005 | EN 140402-801 - DETAIL SPECIFICATION - FIXED LOW POWER WIRE-WOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2 |
| BS EN 140101-806 : 2008 | DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS |
| I.S. EN 60122-1:2002 AMD 1 2018 | QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| CEI EN 60512-16-21 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-21: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16U: WHISKER TEST VIA THE APPLICATION OF EXTERNAL MECHANICAL STRESSES |
| I.S. EN 140401-801:2007 | DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1 |
| I.S. EN 62314:2006 | SOLID-STATE RELAYS |
| I.S. EN 60068-2-58:2015 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) |
| EN 140401-803 : 2007 AMD 3 2017 | DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - CYLINDRICAL - STABILITY CLASSES 0,05; 0,1; 0,25; 0,5; 1; 2 |
| EN 140101-806 : 2008 COR 2014 | DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS |
| EN 140401-801:2007/A1:2013 | DETAIL SPECIFICATION: FIXED LOW POWER FILM SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25; 0,5; 1 |
| EN 60122-1:2002/A1:2018 | QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION (IEC 60122-1:2002/A1:2017) |
| EN 60115-8:2012 | Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors |
| EN 62137-4:2014/AC:2015 | ELECTRONICS ASSEMBLY TECHNOLOGY - PART 4: ENDURANCE TEST METHODS FOR SOLDER JOINT OF AREA ARRAY TYPE PACKAGE SURFACE MOUNT DEVICES (IEC 62137-4:2014) |
| EN 60068-2-82:2007 | Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for electronic and electric components |
| EN 60115-8-1:2015 | Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G |
| EN 60068-2-58:2015/A1:2018 | ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD) (IEC 60068-2-58:2015/A1:2017) |
| EN 140100:2008 | Sectional Specification: Fixed low power film resistors |
| EN 62314 : 2006 | SOLID-STATE RELAYS |
| EN 61188-5-4 : 2007 | PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES - DESIGN AND USE - PART 5-4: ATTACHMENT (LAND/JOINT) CONSIDERATIONS - COMPONENTS WITH J LEADS ON TWO SIDES |
| EN 60512-16-21:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-21: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16U: WHISKER TEST VIA THE APPLICATION OF EXTERNAL MECHANICAL STRESSES |
| EN 60286-5:2004/A1:2009 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 5: MATRIX TRAYS |
| EN 60286-6:2004 | Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components |
| IEC 60191-6:2009 | Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-58:2015+AMD1:2017 CSV | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| IEC 61340-5-3:2015 | Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices |
| EN 61340-5-1:2016/AC:2017-05 | ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS (IEC 61340-5-1:2016/COR1:2017) |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| IEC 62090:2017 | Product package labels for electronic components using bar code and two-dimensional symbologies |
| IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 60286-6:2004 | Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components |
| EN 62090:2017 | Product package labels for electronic components using bar code and two- dimensional symbologies |
| IEC 60286-5:2003+AMD1:2009 CSV | Packaging of components for automatic handling - Part 5: Matrixtrays |
| IEC 61760-2:2007 | Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide |
| EN 60286-3:2013/AC:2013 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 3: PACKAGING OF SURFACE MOUNT COMPONENTS ON CONTINUOUS TAPES (IEC 60286-3:2013) |
| ISO 8601:2004 | Data elements and interchange formats Information interchange Representation of dates and times |
| IEC 60068-2-77:1999 | Environmental testing - Part 2-77: Tests - Test 77: Body strength and impact shock |
| EN 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| IEC 60194:2015 | Printed board design, manufacture and assembly - Terms and definitions |
| IEC 60062:2016 | Marking codes for resistors and capacitors |
| EN 60062:2016/AC:2016-12 | MARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2016/COR1:2016) |
| EN 60068-2-77:1999 | Environmental testing - Part 2-77: Tests - Test 77: Body strength and impact shock |
| EN 61760-2:2007 | Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide |
| IEC 60286-3:2013 | Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes |
| EN 60286-4:2013 | Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms |
| EN 60191-6:2009 | Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages |
| IEC 60286-4:2013 | Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms |
| EN 60068-2-45:1992/A1:1993 | Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents |
| IEC 60068-2-69:2017 | Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method |
| EN 60194:2006 | Printed board design, manufacture and assembly - Terms and definitions |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.