Name: EN 910 : 1996
Brand: CEN

EN 910 : 1996

Superseded

View Superseded by

DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS

Superseded date

01-04-2010

Published date

12-01-2013

Publisher

Comite Europeen de Normalisation

1 Scope
2 Definitions
3 Principle
4 Denominations and symbols
5 Removal of test specimens
5.1 Removal
5.2 Marking
5.3 Heat treatment and/or ageing
5.4 Extraction
5.5 Preparation of specimens
6 Conditions of testing
6.1 Etching
6.2 Testing
6.3 Diameter of former and rollers
6.4 Distance between rollers
6.5 Bending elongation
7 Test results
8 Test report
Annexes
A (informative) Test report

Describes a method of making transverse root, face and side bend tests on test specimens taken from butt welds. Also covers a method for making longitudinal root and face bend tests for use instead of transverse bend tests for heterogeneous assemblies where base materials and/or filler metal have a significant difference in their physical and mechanical properties relative to bending.

Committee	TC 121
DocumentType	Standard
PublisherName	Comite Europeen de Normalisation
Status	Superseded
SupersededBy	EN ISO 5173:2010/A1:2011 UNE-EN ISO 5173:2011

Standards	Relationship
UNI EN 910 : 1997	Identical
NF EN 910 : 1996	Identical
NS EN 910 : 1996	Identical
PN EN 910 : 1999	Identical
SN EN 910 : 1996	Identical
UNE-EN 910:1996	Identical
NEN EN 910 : 1996	Identical
NBN EN 1251-2 : 2000 COR 2006	Identical
BS EN 910:1996	Identical
NBN EN 286-1 : 1998 AMD 2 2006	Identical
NBN EN 910 : 1996	Identical
I.S. EN 910:1996	Identical
DIN EN 910:1996-05	Identical

99/709740 DC : DRAFT JUN 99	PREN 10253-2 - BUTT WELDING PIPE FITTINGS - PART 2: WROUGHT CARBON AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
BS EN 4677-001:2012	Aerospace series. Welded and brazed assemblies for aerospace construction. Joints of metallic materials by electron beam welding Quality of welded assemblies
I.S. EN 10208-2:2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
PREN 10217-6 : DRAFT 2009	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
UNI EN 4677-001 : 2013	AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES
09/30207517 DC : 0	BS EN 10217-6 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
UNI EN 1474-1 : 2009	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
BS EN 10253-3:2008	Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
09/30186082 DC : 0	BS EN 13110 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS - DESIGN AND CONSTRUCTION
DIN EN 14638-3:2012-06	Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods (includes Corrigendum AC:2012)
09/30207508 DC : 0	BS EN 10217-3 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
09/30197751 DC : 0	BS EN 4678 - AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS
04/30116297 DC : DRAFT JUL 2004	ISO 20826 - ROAD VEHICLES - AUTOMOTIVE LPG COMPONENTS - CONTAINERS
PREN 10208-3 : DRAFT 1997	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
I.S. EN 14638-3:2010	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
I.S. EN 10217-6:2002	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 1474-1:2008	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
BS EN 10217-5:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-5:2002/A1:2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
DIN EN 14197-2:2006-11	CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
DIN EN 14532-1:2005-02	WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS
DIN EN ISO 9606-4:1999-06	APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 4: NICKEL AND NICKEL ALLOYS
DIN EN 10208-1:2009-07	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
BS EN ISO 9606-4:1999	Approval testing of welders. Fusion welding Nickel and nickel alloys
BS EN 287-2:1992	Approval testing of welders for fusion welding Aluminium and aluminium alloys
BS EN 14208:2004	Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction
BS EN 12862:2000	Transportable gas cylinders. Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
BS EN ISO 15614-5:2004	Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc welding of titanium, zirconium and their alloys
DIN EN 10296-1 E : 2004	WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
I.S. EN 14276-1:2006	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
ISO 9606-5:2000	Approval testing of welders — Fusion welding — Part 5: Titanium and titanium alloys, zirconium and zirconium alloys
BS EN 14075:2002	Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m<sup>3</sup> and for installation underground. Design and manufacture
EN 10253-4:2008/AC:2009	BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
EN 12805:2002	Automotive LPG components - Containers
EN 10224:2002/A1:2005	NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
EN 10296-1:2003	Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 12862:2000	Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
EN 10208-1:2009	Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
EN 13458-2:2002/AC:2006	CRYOGENIC VESSELS - STATIC VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
EN 10253-3:2008	Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
EN 12797:2000/A1:2003	BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS
EN 10296-2:2005/AC:2007	WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
EN 13530-2:2002/AC:2006	CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
DIN 8561-12:1995-10 (Draft)	APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 12: TITANIUM AND TITANIUM ALLOYS
DIN EN 10253-2:2008-09	Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
06/30150265 DC : 0	EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
04/30116684 DC : DRAFT JUL 2004	EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LPG METALLIC PRESSURE DRUMS WITH A CAPACITY BETWEEN (150 AND 1 000 LITRES)
00/708223 DC : DRAFT MAY 2000	BS EN ISO 15614-9 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 9: UNDERWATER HYPERBARIC WET WELDING
09/30207501 DC : 0	BS EN 10217-1 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
00/716910 DC : DRAFT NOV 2000	BS EN ISO 15614-2 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS
DIN 8563-123:1994-06 (Draft)	QUALITY ASSURANCE OF WELDED STRUCTURES; SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS; WELDING PROCEDURE TEST FOR PIPELINE WELDING ON SITE
PREN 4677-001 : 200P1	AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES
I.S. EN 10217-3:2002	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
I.S. EN 10217-5:2002	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 10253-2:2007	Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
PREN 10217-3 : DRAFT 2009	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN 10217-6:2005-04	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
EN 10217-1:2002/A1:2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
I.S. EN 10253-2:2007	BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
DIN EN 10296-2 : 2007-06	WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
BS EN 14532-1:2004	Welding consumables. Test methods and quality requirements Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
BS EN ISO 9606-5:2000	Approval testing of welders. Fusion welding Titanium and titanium alloys, zirconium and zirconium alloys
BS EN 12797:2000	Brazing. Destructive tests of brazed joints
BS EN 14197-2 : 2003	CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
DIN EN 12953-5:2002-08	SHELL BOILERS - PART 5: INSPECTION DURING CONSTRUCTION, DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
DIN EN 10208-2:2009-07	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
I.S. EN 10296-2:2006	WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
DIN EN 10208-1:1998-02	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
NF EN 14276-1 : 2006 + A1 2011	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
I.S. EN 14398-2:2003	CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
BS EN 10217-1:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
00/708222 DC : DRAFT MAY 2000	BS EN ISO 15614-1 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS -WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS
11/30235499 DC : 0	BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
08/30180502 DC : DRAFT JUNE 2008	BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
BS EN 14638-3:2010	Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded carbon steel cylinders made to a design justified by experimental methods
DIN EN 10253-4:2008-06	BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
07/30165594 DC : DRAFT AUG 2007	BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL TANKS FOR LIQUEFIED PETROLEUM GAS (LPG) - ROAD TANKERS DESIGN AND MANUFACTURE
09/30207514 DC : 0	BS EN 10217-5 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
04/19989519 DC : DRAFT AUG 2004	BS EN ISO 15614-7 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 7: OVERLAY WELDING
09/30207521 DC : 0	BS EN 10217-7 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
05/30114218 DC : DRAFT FEB 2005	EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING
UNI EN 10253-4 : 2009	BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
I.S. EN 4677-001:2012	AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES
I.S. EN 10217-1:2002	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
EN 10217-3:2002/A1:2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN 10217-5:2005-04	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
PREN 10217-7 : DRAFT 2009	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
DIN EN 10217-3:2005-04	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN 10217-1:2005-04	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
DIN EN 287-6:2016-03 (Draft)	QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
BS EN 10217-6:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties
DIN EN ISO 15614-5 E : 2004	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 5: ARC WELDING OF TITANIUM, ZIRCONIUM AND THEIR ALLOYS
DIN EN 12797:2000-12	Brazing - Destructive tests of brazed joints; English version of DIN EN 12797
UNE-EN 10208-1:2011	Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A
DIN EN 14276-1:2011-05	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
BS EN 10208-2:2009	Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B
DIN EN 10296-2 E : 2006	WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
BS EN 10224:2002	Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions
BS EN ISO 9606-3:1999	Approval testing of welders. Fusion welding Copper and copper alloys
EN 14276-1:2020	Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
UNI EN 14276-1 : 2011	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
EN 1474-1:2008	Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
UNI EN ISO 15614-5 : 2005	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 5: ARC WELDING OF TITANIUM, ZIRCONIUM AND THEIR ALLOYS
UNI EN 10208-2 : 2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
UNI EN 14398-2 : 2008	CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
UNI EN 10208-1 : 2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
UNI EN ISO 9606-2 : 2006	Qualification test of welders - Fusion welding - Part 1: Aluminium and aluminium alloys
UNI EN 13458-2 : 2004	CRYOGENIC VESSELS - STATIC VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
UNI EN 12862 : 2002	TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE WELDED ALUMINIUM ALLOY GAS CYLINDERS
UNI EN 13530-2 : 2004	CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
01/714474 DC : DRAFT NOV 2001	BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
DIN EN 1474-1:2009-03	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
03/108196 DC : 0	EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
08/30182454 DC : DRAFT JULY 2008	BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
04/30125246 DC : DRAFT NOV 2004	EN 15085-5 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 5: INSPECTION, TESTING AND DOCUMENTATION
02/710858 DC : DRAFT SEP 2002	BS EN 14532-1 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS
UNI EN 10253-3 : 2009	BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
BS EN 1474-1:2008	Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms
DIN EN 10253-3:2009-02	BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
BS EN 10253-4:2008	Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
03/115441 DC : DRAFT OCT 2003	BS EN ISO 15614-6 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - ARC WELDING OF COPPER AND ITS ALLOYS
UNI EN 14638-3 : 2010	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
UNI EN 287-6 : 2010	QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON
BS EN 10217-3:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes
NF EN 10253-3 : 2009	BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
EN 10217-6:2002/A1:2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
DIN EN 13831:2007-12	Closed expansion vessels with built in diaphragm for installation in water
UNE-EN 10208-2:2011	Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
DIN EN 14208:2004-05	Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
BS EN 12805:2002	Automotive LPG components. Containers
BS EN 14398-2 : 2003	CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
BS EN 288-4:1992	Specification and approval of welding procedures for metallic materials Welding procedure tests for the arc welding of aluminium and its alloys
BS EN ISO 15614-11:2002	Specification and qualification of welding procedures for metallic materials. Welding procedure test Electron and laser beam welding
BS EN 10296-2:2005	Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel
ISO 15614-5:2004	Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 5: Arc welding of titanium, zirconium and their alloys
BS EN 1474:1997	Installation and equipment for liquefied natural gas. Design and testing of loading/unloading arms
BS EN ISO 9606-2:2004	Qualification test of welders. Fusion welding Aluminium and aluminium alloys
BS EN ISO 15618-2:2002	Qualification testing of welders for under-water welding Diver-welders and welding operators for hyperbaric dry welding
BS EN 12953-5:2002	Shell boilers Inspection during construction, documentation and marking of pressure parts of the boiler
EN 12953-5:2002	Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
BS EN 13458-2:2002	Cryogenic vessels. Static vacuum insulated vessels Design, fabrication, inspection and testing
BS EN 14638-1:2006	Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded austenitic stainless steel cylinders made to a design justified by experimental methods
ISO 15614-11:2002	Specification and qualification of welding procedures for metallic materials Welding procedure test Part 11: Electron and laser beam welding
ISO 15618-2:2001	Qualification testing of welders for underwater welding Part 2: Diver-welders and welding operators for hyperbaric dry welding
ISO 9606-4:1999	Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys
EN 14276-1:2006+A1:2011	Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
BS EN 13530-2:2002	Cryogenic vessels. Large transportable vacuum insulated vessels Design, fabrication, inspection and testing
BS EN 14276-1 : 2006	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
I.S. EN 12953-5:2002	SHELL BOILERS - PART 5: INSPECTION DURING CONSTRUCTION, DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
BS EN 13831:2007	Closed expansion vessels with built-in diaphragm for installation in water
ISO 9606-3:1999	Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys
UNE-EN ISO 9606-4:1999	APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 4: NICKEL AND NICKEL ALLOYS (ISO 9606-4:1999)
DIN EN 10224:2005-12	NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
EN 1474 : 1997	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF LOADING/UNLOADING ARMS
EN ISO 15618-2:2001	Qualification testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001)
EN 14398-2:2003+A2:2008	Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
EN 287-2:1992/A1:1997	APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS
EN ISO 9606-4:1999	Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
EN 14638-1:2006	Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
EN 14532-1:2004	Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
EN 288-4:1992/A1:1997	SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURES FOR THE ARC WELDING OF ALUMINIUM AND ITS ALLOYS
EN 4677-001:2012	Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part 001: Quality of welded assemblies
EN ISO 9606-2:2004	Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
EN ISO 15614-11:2002	Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
EN 286-1:1998/A2:2005	SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES
EN 14638-3:2010/AC:2012	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
EN 14197-2:2003/AC:2006	CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
EN 13831:2007	Closed expansion vessels with built in diaphragm for installation in water
EN ISO 15614-5:2004	Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)
EN 14075:2002/A1:2004	STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] AND FOR INSTALLATION UNDERGROUND - DESIGN AND MANUFACTURE
EN 14208:2004	Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
EN ISO 9606-5:2000	Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)
EN ISO 9606-3 : 1999	Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
BS EN 10253-2:2007	Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements
I.S. EN 10208-1:2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
I.S. EN 1474:1998	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF LOADING/UNLOADING ARMS
PREN ISO 15614-6 : DRAFT 2003	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC WELDING OF COPPER AND ITS ALLOYS
I.S. EN 14075:2002	STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] AND FOR INSTALLATION UNDERGROUND - DESIGN AND MANUFACTURE
I.S. EN ISO 9606-2:2005	QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 2: ALUMINIUM AND ALUMINIUM ALLOYS
03/119783 DC : DRAFT DEC 2003	BS EN 13445-8 - UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
NF EN 14638-3 : 2010	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL, CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS
UNE-EN 14638-3:2011	Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods
08/30182457 DC : DRAFT JULY 2008	BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
97/703009 DC : 0	PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
PREN 10217-5 : DRAFT 2009	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
NFL 06 394 : 2010	WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - ASSEMBLY OF METALLIC MATERIALS WELDED BY TIG METHOD - QUALITY OF WELDMENTS
I.S. EN 10253-4:2008	BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
KTA 3201.3 : 2007(R2012)	COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE
I.S. EN 10253-3:2008	BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
DIN EN ISO 9606-5:2000-04	APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 5: TITANIUM AND TITANIUM ALLOYS, ZIRCONIUM AND ZIRCONIUM ALLOYS
DIN EN ISO 9606-2:2005-03	Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004); German version EN ISO 9606-2:2004
DIN EN ISO 9606-3:1999-06	APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 3: COPPER AND COPPER ALLOYS
DIN EN 14398-2:2008-11	CRYOGENIC VESSELS - LARGE TRANSPORTABLE NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
DIN EN ISO 15618-2 E : 2002	APPROVAL TESTING OF WELDERS FOR UNDER-WATER WELDING - PART 2: DIVER-WELDERS AND WELDING OPERATORS FOR HYPERBARIC DRY WELDING
BS EN 10296-1:2003	Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes
ISO 9606-2:2004	Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
DIN EN 10296-1:2004-02	Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
BS EN 1251-2:2000	Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume Design, fabrication, inspection and testing
BS EN 10208-1:2009	Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A
BS EN 286-1 : 1998	SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES
EN 1251-2:2000/AC:2006	CRYOGENIC VESSELS - TRANSPORTABLE VACUUM INSULATED VESSELS OF NOT MORE THAN 1000 LITRES VOLUME - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
DIN EN ISO 15614-5:2004-07	Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)
ONORM EN 10253-2 : 2008	BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
DIN EN ISO 15618-2:2002-04	APPROVAL TESTING OF WELDERS FOR UNDER-WATER WELDING - PART 2: DIVER-WELDERS AND WELDING OPERATORS FOR HYPERBARIC DRY WELDING
DIN EN 10296-2:2006-02	Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
EN 10208-2:2009	Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
DIN EN 14075:2003-01	STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] AND FOR INSTALLATION UNDERGROUND - DESIGN AND MANUFACTURE
DIN EN 14638-1:2006-07	Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
PREN 4678 : 200P1	AEROSPACE SERIES - WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES - JOINTS OF METALLIC MATERIALS BY LASER BEAM WELDING - QUALITY OF WELDMENTS
UNE-EN 14276-1:2007	Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements