Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 932-2:1999

Current
Current

The latest, up-to-date edition.

Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
Published date

20-01-1999

Foreword
1 Scope
2 Normative references
3 Definitions and symbols
4 Principle
5 Apparatus
6 Consideration before sample reduction
7 Sample reduction technique using a rotary sample
    divider
8 Sample reduction using a riffle box
9 Sample reduction using fractional shovelling
10 Sample reduction by quartering
11 Sample reduction to a test portion of a specified
    mass within a small tolerance
12 Sample reduction with crushing to reduce the particle
    size
13 Procedures for obtaining duplicate test portions
Annex A (informative) Half, three-quarters and five-eigths
                        divisions by a riffle box
Annex B (informative) Worked examples

This European Standard specifies methods for reducing laboratory samples of aggregates to test portions, a) when the test portion mass is: - specified by a lower limit on the mass, - specified by a tolerance around a target mass; - determined precisely by the requirements of a test method.

Committee
CEN/TC 154
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
I.S. EN 932-2:1999 Identical
NS EN 932-2 : 1ED 1999 Identical
NF EN 932-2 : 1999 Identical
BS EN 932-2:1999 Identical
UNE-EN 932-2:1999 Identical
NBN EN 932-2 : 1999 Identical
PN EN 932-2 : 2001 Identical
NEN EN 932-2 : 1999 Identical
UNI EN 932-2 : 2000 Identical
SN EN 932-2 : 1999 Identical
DIN EN 932-2:1999-03 Identical

DIN EN 1367-8 E : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
BS EN 1097-11:2013 Tests for mechanical and physical properties of aggregates Determination of compressibility and confined compressive strength of lightweight aggregates
I.S. EN 13055-2:2004 LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
BS EN 1367-7:2014 Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing of Lightweight aggregates
07/30166977 DC : DRAFT AUG 2007 BS EN 1744-1 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
07/30165780 DC : DRAFT AUG 2007 BS EN 1097-5 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN
BS EN 15599-1:2010 Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from expanded perlite (EP) products Specification for bonded and loose-fill products before installation
09/30207822 DC : 0 BS EN 15600-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
PD CEN/TR 15310-4:2006 Characterization of waste. Sampling of waste materials Guidance on procedures for sample packaging, storage, preservation, transport and delivery
BS EN 933-11:2009 Tests for geometrical properties of aggregates Classification test for the constituents of coarse recycled aggregate
10/30218648 DC : DRAFT JUNE 2010 BS EN 1744-7 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA AGGREGATE)
DIN EN 15600-1:2010-12 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
08/30185875 DC : 0 BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
DIN EN 15732:2013-01 LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
DIN EN 1744-7:2012-05 Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
BS EN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA). Expanded clay lightweight aggregate products (LWA)
11/30241878 DC : 0 BS EN 933-6 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
06/30153220 DC : 0 BS EN 1367-6 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6 - RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT
BS EN 1744-7:2012 Tests for chemical properties of aggregates Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
UNE-EN 1367-8:2015 Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates
I.S. EN 1744-7:2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH AGGREGATE (MIBA AGGREGATE)
08/30188887 DC : 0 BS EN 933-9 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
I.S. EN 1367-6:2008 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL)
I.S. EN 1744-8:2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES
UNI EN 1744-7 : 2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH - AGGREGATE (MIBA AGGREGATE)
UNI EN 15732 : 2012 LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
DIN EN 1367-2:2010-02 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test
DIN EN 933-8:2015-07 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST
BS EN 1097-4:2008 Tests for mechanical and physical properties of aggregates Determination of the voids of dry compacted filler
BS EN 1097-9:2014 Tests for mechanical and physical properties of aggregates Determination of the resistance to wear by abrasion from studded tyres. Nordic test
BS EN 1097-8:2009 Tests for mechanical and physical properties of aggregates Determination of the polished stone value
UNE-EN 13179-1:2013 Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test
BS EN 1744-6:2006 Tests for chemical properties of aggregates Determination of the influence of recycled aggregate extract on the initial setting time of cement
BS EN 13450:2013 Aggregates for railway ballast
BS EN 1097-1:2011 Tests for mechanical and physical properties of aggregates Determination of the resistance to wear (micro-Deval)
BS EN 1367-3:2001 Tests for thermal and weathering properties of aggregates Boiling test for Sonnenbrand basalt
I.S. EN 1097-1:2011 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL)
EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
DIN EN 14316-1:2004-11 Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14316-1:2004
I.S. EN 1367-2:2009 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST
EN 1097-10:2014 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
I.S. EN 13286-1:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING
I.S. EN 13286-4:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER
EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 13179-1:2013 Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test
CEN/TR 15310-4 : 2006 CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY
DIN EN 14317-1:2004-11 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 14317-1:2004
EN 1097-4:2008 Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler
EN 1097-5:2008 Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
EN 1097-1:2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
EN 13055-1:2002/AC:2004 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
EN 13450:2002/AC:2004 AGGREGATES FOR RAILWAY BALLAST
EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 13055-2:2004 Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
EN 13043:2002/AC:2004 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
EN 13286-4:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER
EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
DIN EN 15599-1 E : 2010 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
04/30077125 DC : 0 EN 933-11 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATES
UNI EN 933-11 : 2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE
DIN EN 1367-7:2014-07 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
04/30088151 DC : DRAFT FEB 2004 EN 1744-6 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT
12/30256420 DC : 0 BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
00/105661 DC : DRAFT AUG 2000 BS EN 1744-4 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES
16/30320756 DC : 0 BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
12/30256925 DC : 0 BS EN 13055 - LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
PREN 15600-1 : DRAFT 2009 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
PREN 15732 : DRAFT 2012 LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
DIN 4226-2:2002-02 AGGREGATES FOR CONCRETE AND MORTAR - PART 2: LIGHTWEIGHT AGGREGATES
I.S. EN 13055:2016 LIGHTWEIGHT AGGREGATES
UNI EN 1367-7 : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
I.S. EN 1097-11:2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES
I.S. EN 15600-1:2010 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
NF EN 1097-8 : 2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
DIN EN 1367-1:2007-06 Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing
DIN EN 933-6:2014-07 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
DIN EN 933-9:2013-07 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test (includes Amendment A1:2013)
DIN EN 1367-4:2008-06 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE
17/30348303 DC : 0 BS EN 17087 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE FOR TESTING OF RELEASE AND ANALYSIS OF CONTENT
BS EN 933-9 : 2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
UNE-EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
BS EN 13055-2:2004 Lightweight aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
BS EN 13286-1:2003 Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Introduction, general requirements and sampling
BS EN 14317-1:2004 Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation
BS EN 14316-1:2004 Thermal insulation products for buildings. In-situ thermal insulation formed from expanded perlite (EP) products Specification for bonded and loose-fill products before installation
BS EN 933-3:2012 Tests for geometrical properties of aggregates Determination of particle shape. Flakiness index
BS EN 933-1:2012 Tests for geometrical properties of aggregates Determination of particle size distribution. Sieving method
I.S. EN 933-10:2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING)
I.S. EN 933-6:2014 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
I.S. EN 1367-1:2007 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING
I.S. EN 1097-5:2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN
I.S. EN 13179-1:2013 TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST
I.S. EN 13450:2013 AGGREGATES FOR RAILWAY BALLAST
I.S. EN 933-1:2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD
I.S. EN 1097-7:2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD
I.S. EN 933-3:2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX
I.S. EN 1097-6:2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION
I.S. EN 933-8:2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST
I.S. EN 933-9:2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
I.S. EN 1097-4:2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER
I.S. EN 933-4:2008 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX
I.S. EN 1367-4:2008 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE
DIN EN 12697-11:2012-07 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN
I.S. EN 1097-9:2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST
DIN EN 933-6:2002-02 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
I.S. EN 1744-1:2009 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
ONORM EN 1097-7 : 2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD
UNE-EN 1744-7:2012 Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
DIN EN 1367-8:2014-07 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
DIN EN 1097-11 E : 2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES
BS EN 13055:2016 Lightweight aggregates
DIN EN 1097-11:2013-11 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
DIN EN 1744-8:2012-11 Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
08/30185872 DC : 0 BS EN 933-10 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING)
I.S. EN 13055-1:2002 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
07/30166974 DC : DRAFT AUG 2007 BS EN 1367-2 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULPHATE TEST
DIN EN 15599-1:2010-12 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
09/30207815 DC : 0 BS EN 15599-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
UNI EN 15599-1 : 2010 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
UNI EN 1097-11 : 2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES
UNI EN 1367-8 : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
06/30153237 DC : DRAFT JULY 2006 BS ISO 16003 - COMPONENTS FOR GASEOUS MEDIA AND FIRE EXTINGUISHING SYSTEMS - REQUIREMENTS AND TEST METHODS - CONTAINER VALVE ASSEMBLIES AND THEIR ACTUATORS, SELECTOR VALVES AND THEIR ACTUATORS, NOZZLES, FLEXIBLE CONNECTORS, AND CHECK VALVES AND NON-RETURN VALVES
10/30218642 DC : DRAFT JUNE 2010 BS EN 1097-6 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION
PREN 933-9 : DRAFT 2008 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
BS EN 1367-6:2008 Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing in the presence of salt (NaCl)
I.S. EN 15732:2012 LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
PREN 15599-1 : DRAFT 2009 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
PREN 933-10 : DRAFT 2008 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING)
DIN EN 1744-4:2005-10 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
DIN EN 1744-1:2013-03 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
DIN EN 1744-5:2006-12 Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts
DIN EN 933-3:2012-04 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
DIN EN 933-1:2012-03 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
DIN EN 1744-6:2006-12 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
DIN EN 1097-10:2014-09 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
DIN EN 1097-4:2008-06 Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler
DIN EN 1097-1:2011-04 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
DIN EN 1097-8:2016-07 (Draft) TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
DIN EN 933-10:2009-10 Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving)
DIN EN 1097-5:2008-06 Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
DIN EN 14317-1 E : 2004 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
DIN EN 1097-6:2013-09 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1097-8:2009 Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value
BS EN 1097-5:2008 Tests for mechanical and physical properties of aggregates Determination of the water content by drying in a ventilated oven
BS EN 933-6:2014 Tests for geometrical properties of aggregates Assessment of surface characteristics. Flow coefficient of aggregates
BS EN 13286-4:2003 Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Vibrating hammer
UNI EN 1097-7 : 2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD
UNI EN 1744-1 : 2013 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
UNI EN 14063-1 : 2005 THERMAL INSULATION MATERIALS AND PRODUCTS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION
UNI EN 933-3 : 2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX
UNI EN 1367-2 : 2010 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST
UNI EN 1367-1 : 2007 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING
UNI EN 933-6 : 2014 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
UNI EN 1367-4 : 2008 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE
UNI EN 13179-1 : 2013 TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST
UNI EN 1097-5 : 2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN
UNI EN 933-1 : 2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD
UNI EN 933-4 : 2008 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX
UNI EN 13043 : 2013 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
UNI EN 1097-10 : 2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
UNI EN 1744-6 : 2007 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF RECYCLED AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT
I.S. EN 13043:2013 AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS
UNI EN 1097-1 : 2011 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL)
UNI EN 1097-9 : 2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST
UNI EN 933-10 : 2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING)
UNI EN 1097-4 : 2008 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER
UNI EN 13450 : 2013 AGGREGATES FOR RAILWAY BALLAST
UNE-EN 1097-11:2013 Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates
BS EN 1367-8:2014 Tests for thermal and weathering properties of aggregates Determination of resistance to disintegration of Lightweight Aggregates
I.S. EN 933-11:2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE
07/30165777 DC : DRAFT AUG 2007 BS EN 1097-4 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER
DIN EN 1367-7 E : 2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
07/30170936 DC : 0 BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
11/30231793 DC : 0 BS EN 16262 - SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES
07/30165783 DC : DRAFT AUG 2007 BS EN 1097-7 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD
BS EN 1744-8:2012 Tests for chemical properties of aggregates Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
NF EN 15600-1 : 2010 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
07/30165774 DC : DRAFT AUG 2007 BS EN 933-4 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX
DIN EN 933-11:2011-05 Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate (includes Corrigendum AC:2009)
NF EN 15599-1 : 2010 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
PREN 933-6 : DRAFT 2011 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES
18/30368675 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
15/30326284 DC : 0 BS EN 16907-2 - EARTHWORKS - PART 2: CLASSIFICATION OF MATERIALS
I.S. CEN TR 15310-4:2006 CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY
DIN EN 933-4:2015-01 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
DIN EN 1097-2:2016-07 (Draft) TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
DIN EN 1097-7:2008-06 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
DIN EN 1097-3:1998-06 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS
DIN EN 14063-1:2016-10 (Draft) Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016
DIN EN 1097-9:2014-03 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST
BS EN 12697-11:2012 Bituminous mixtures. Test methods for hot mix asphalt Determination of the affinity between aggregate and bitumen
BS EN 1744-1 : 2009 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS
I.S. EN 1097-2:2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
BS EN 933-4:2008 Tests for geometrical properties of aggregates Determination of particle shape. Shape index
UNE-EN 933-3:2012 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
UNI EN 1097-8 : 2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
BS EN 933-10:2009 Tests for geometrical properties of aggregates Assessment of fines. Grading of filler aggregates (air jet sieving)
UNI EN 1097-2 : 2010 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
UNE-EN 1744-1:2010 Tests for chemical properties of aggregates - Part 1: Chemical analysis
EN 12697-11:2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN
I.S. EN 12697-11:2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN
BS EN 13055-1:2002 Lightweight aggregates Lightweight aggregates for concrete, mortar and grout
BS EN 1367-2:2009 Tests for thermal and weathering properties of aggregates Magnesium sulfate test
UNI EN 12697-11 : 2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 11: DETERMINATION OF THE AFFINITY BETWEEN AGGREGATE AND BITUMEN
BS EN 1367-1:2007 Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing
UNE-EN 1097-6:2014 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
BS EN 1744-4:2005 Tests for chemical properties of aggregates Determination of water susceptibility of fillers for bituminous mixtures
BS EN 1097-2:2010 Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation
BS EN 1097-6:2013 Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption
UNE-EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
BS EN 933-8 : 2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST
BS EN 13179-2:2000 Test for filler aggregate used in bituminous mixtures Bitumen number
I.S. EN 1097-8:2009 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
UNE-EN 1097-1:2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
BS EN 1367-4:2008 Tests for thermal and weathering properties of aggregates Determination of drying shrinkage
EN 1367-6:2008 Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl)
EN 14063-1:2004/AC:2006 THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION
UNI EN 933-9 : 2013 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST
EN 14317-1:2004 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
EN 1744-1:2009+A1:2012 Tests for chemical properties of aggregates - Part 1: Chemical analysis
EN 14316-1:2004 Thermal insulation products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
EN 1367-7:2014 Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates
EN 933-11:2009/AC:2009 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE
UNI EN 1097-6 : 2013 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION
EN 933-8:2012+A1:2015 Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test
EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 15600-1:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
EN 1367-8:2014 Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates
ONORM EN 1744-4 : 2005 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES
EN 1367-4:2008 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
EN 1744-6:2006 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
EN 15599-1:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation
EN 1367-2:2009 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test
EN 1744-7:2012 Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate)
EN 933-9:2009+A1:2013 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test
EN 1744-5:2006 Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts
EN 933-4:2008 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
EN 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA)
EN 933-6:2014 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
EN 1744-3:2002 Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates
EN 1367-3:2001/AC:2004 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 3: BOILING TEST FOR "SONNENBRAND BASALT"
EN 933-3:2012 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
EN 933-10:2009 Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving)
EN 1367-1:2007 Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing
EN 1744-8:2012 Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
DIN EN 1744-8 E : 2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES
DIN EN 15600-1 E : 2010 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
UNE-EN 15732:2014 Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA)
06/30158376 DC : 0 BS EN 15599-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
04/30088146 DC : DRAFT FEB 2004 EN 1744-5 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS
DIN EN 1367-6:2008-12 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL)
16/30320762 DC : 0 BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
UNE-EN 1744-8:2013 Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates
06/30158382 DC : 0 BS EN 15600-1 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULATE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
I.S. EN 1367-8:2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES
DIN EN 15732 E : 2013 LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA)
BS EN 15600-1:2010 Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for bonded and loose-fill products before installation
PREN 1744-5 : DRAFT 2004 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS
UNI EN 1367-6 : 2008 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL)
UNE-EN 1367-7:2015 Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates
PREN 1097-8 : DRAFT 2016 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE
UNI EN 1744-8 : 2012 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES
I.S. EN 15599-1:2010 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
UNI EN 15600-1 : 2010 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION
I.S. EN 1367-7:2014 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES
BS EN 1744-3:2002 Tests for chemical properties of aggregates Preparation of eluates by leaching of aggregates
EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
BS EN 1097-10:2014 Tests for mechanical and physical properties of aggregates Determination of water suction height
BS EN 1097-7:2008 Tests for mechanical and physical properties of aggregates Determination of the particle density of filler. Pyknometer method
BS EN 14063-1:2004 Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products Specification for the loose-fill products before installation
BS EN 13043:2013 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
UNE-EN 1097-10:2015 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
BS EN 13179-1:2013 Tests for filler aggregate used in bituminous mixtures Delta ring and ball test
BS EN 1744-5:2006 Tests for chemical properties of aggregates Determination of acid soluble chloride salts
EN 13055 : 2016 LIGHTWEIGHT AGGREGATES
EN 13179-2:2000 Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number
I.S. EN 1744-4:2005 TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES
DIN EN 13055-2:2004-09 LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS
DIN EN 13055-1:2002-08 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
DIN EN 1097-10:2003-03 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
DIN EN 14063-1:2004-11 Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation; German version EN 14063-1:2004
I.S. EN 1097-10:2014 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT
EN 13286-1:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING
EN 1744-4:2005 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
UNE-EN 933-9:2010 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test

PREN 932-5 : DRAFT 2009 TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION
EN 932-1:1996 Tests for general properties of aggregates - Part 1: Methods for sampling

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more