EN ISO 11124-3:1997
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
01-02-2019
18-06-1997
Foreword
1 Scope
2 Normative references
3 Definitions
4 Designation of abrasives
5 Sampling
6 Requirements for high-carbon cast-steel shot and
grit abrasives
7 Package identification and lot traceability
8 Information to be provided by the manufacturer or
supplier
Annex A (informative) Approximately equivalent codings for
shot and grit abrasives
Annex B (informative) Bibliography
Annex ZA (normative) Normative references to international
publications with their relevant European publications
Specifies requirements for 14 grades of high-carbon cast-steel shot and 12 grades of high-carbon cast-steel grit abrasive: designation, sampling, package identification and lot traceability, information to be supplied by the manufacturer or supplier, hardness, density, defect/structural requirements and chemical composition. The requirements specified apply to abrasives supplied in the "new" condition only.
| Committee |
CEN/TC 139
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NEN-EN-ISO 11124-3:2018 | Identical |
| UNI EN ISO 11124-3 : 1999 | Identical |
| UNE-EN ISO 11124-3:1997 | Identical |
| DIN EN ISO 11124-3:2018-12 | Identical |
| BS EN ISO 11124-3:1997 | Identical |
| I.S. EN ISO 11124-3:1998 | Identical |
| ISO 11124-3:2018 | Identical |
| BS EN ISO 11124-3:2018 | Identical |
| NS-EN ISO 11124-3 ED1 : 2018 | Identical |
| I.S. EN ISO 11124-3:2018 | Identical |
| NEN EN ISO 11124-3 : 1997 | Identical |
| NBN EN ISO 11124-3 : 1997 | Identical |
| ISO 11124-3:1993 | Identical |
| ONORM EN ISO 11124-3 : 1997 | Identical |
| PN-EN ISO 11124-3: 2018-11 | Identical |
| ÖNORM EN ISO 11124-3: 2018 12 01 | Identical |
| NS EN ISO 11124-3 : 1ED 1997 | Identical |
| PN EN ISO 11124-3 : 2000 | Identical |
| SN EN ISO 11124-3 : 1998 | Identical |
| DIN EN ISO 11124-3:1997-10 | Identical |
| UNI EN ISO 11124-3:2019 | Identical |
| NF EN ISO 11124-3 : 1997 | Identical |
| ISO 11124-4:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 4: Low-carbon cast-steel shot |
| ISO 11125-4:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 4: Determination of apparent density |
| ISO 11125-3:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 3: Determination of hardness |
| DIN 8201-1:1985-07 | ABRASIVES; CLASSIFICATION, DESIGNATION |
| DIN 8201-2:1985-07 | METALLIC CAST ABRASIVES - GRAIN SHAPE: GLOBULAR |
| ISO 11125-6:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 6: Determination of foreign matter |
| EN ISO 11125-3:1997 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993) |
| ISO 629:1982 | Steel and cast iron — Determination of manganese content — Spectrophotometric method |
| ISO 4935:1989 | Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace |
| SAE J 827 : 2013 | HIGH-CARBON CAST-STEEL-SHOT |
| EN ISO 11125-1:1997 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993) |
| EN ISO 11125-7:1997 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993) |
| ISO 439:1994 | Steel and iron Determination of total silicon content Gravimetric method |
| DIN 8201-3:1985-07 | METALLIC CAST ABRASIVES, GRAIN SHAPE, EDGED |
| EN ISO 11125-2:1997 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993) |
| DIN 8201-4:1985-07 | ABRASIVES - STEEL WIRE SHOT |
| SAE J 441 : 2013 | Cut Wire Shot |
| ISO 11125-1:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 1: Sampling |
| ISO 10714:1992 | Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method |
| EN 24935:1991 | Steel and iron - Determination of sulphur content - Infrared absorption method after combustion in an induction furnace (ISO 4935:1989) |
| ISO 11125-5:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 5: Determination of percentage defective particles and of microstructure |
| ISO 9556:1989 | Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace |
| ISO 11125-7:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 7: Determination of moisture |
| EN ISO 11125-5:1997 | Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993) |
| SAE J 444 : 2012 | CAST SHOT AND GRIT SIZE SPECIFICATIONS FOR PEENING AND CLEANING |
| ISO 11125-2:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 2: Determination of particle size distribution |
| BS 2451:1963 | Specification for chilled iron shot and grit |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.