Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN ISO 13703:2000/AC:2007

Current
Current

The latest, up-to-date edition.

PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS
Published date

03-10-2007

Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviated
   terms
   3.1 Terms and definitions
   3.2 Symbols and abbreviated terms
4 General considerations
   4.1 Materials
   4.2 Code of pressure piping
   4.3 Demarcation between systems with different
        pressure ratings
   4.4 Corrosion considerations
5 Piping design
   5.1 Pipe material grades
   5.2 Sizing criteria - General
   5.3 Sizing methods for liquid lines
   5.4 Sizing criteria for single-phase gas lines
   5.5 Sizing criteria for gas/liquid two-phase lines
   5.6 Pipe wall thicknesses
   5.7 Joint connections
   5.8 Expansion and flexibility
   5.9 Start-up provisions
6 Selection of valves
   6.1 General
   6.2 Types of valves
   6.3 Fire resistance of valves
   6.4 Valve sizing
   6.5 Valve pressure and temperature ratings
   6.6 Valve materials
7 Fittings and flanges
   7.1 General
   7.2 Welded fittings
   7.3 Screwed fittings
   7.4 Branch connections
   7.5 Flanges
   7.6 Proprietary connectors
   7.7 Special requirements for sulfide stress-cracking
        service
   7.8 Erosion prevention
8 Design considerations for particular piping
   systems
   8.1 General
   8.2 Wellhead accessory items
   8.3 Flowline and flowline accessories
   8.4 Production manifolds
   8.5 Process vessel piping
   8.6 Utility systems
   8.7 Heating fluid and glycol systems
   8.8 Pressure relief and disposal systems
   8.9 Drain systems
   8.10 Bridge piping between platforms
   8.11 Risers
   8.12 Sampling valves
9 Considerations of related items
   9.1 General
   9.2 Layout
   9.3 Elevations
   9.4 Piping supports
   9.5 Other corrosion considerations
   9.6 Thermal insulation
   9.7 Noise
   9.8 Pipe, valves and fittings tables
   9.9 Inspection, maintenance, repair and modification
10 Installation and quality control
   10.1 General
   10.2 Welding
   10.3 Pressure testing
   10.4 Test record
Annex A (informative) - Example problems
Annex B (informative) - Examples of pipe, valves and
        fittings tables
Annex C (informative) - Acceptable butt-welded joint
        design for unequal wall thicknesses
Bibliography

Provides minimum requirements and guidance for the design and installation of new piping systems on production platforms located offshore for the petroleum and natural gas industries.

Committee
TC 12
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

BS EN 62424:2016 Representation of process control engineering. Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools
EN 62424:2016 Representation of process control engineering - Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools

ASTM A 139 : 2000 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
API RP 14C : 2017 ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES
API 520-1 : 2014 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION
NACE TM 02 84 : 2016 EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
ASME PV CODE 8 DIV 1 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
ASME B16.10 : 2017 FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES
ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
ASTM A 350 : 2004 SPECIFICATION FOR FORGINGS, CARBON AND LOW ALLOY STEEL, REQUIRING NOTCH TOUGHNESS TESTING FOR PIPING COMPONENTS
NACE TM 01 77 : 2016 LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS
ASME B31.3:2016 PROCESS PIPING
API std 602 : 2015 GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
API 510 : 2014 PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION
NACE RP 01 76 : 2003 CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION
API 5L : 2012 LINE PIPE
ISO 10434:2004 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
ISO 10418:2003 Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems
NACE MR 01 75 : 2003 METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
API 521 : 2014 PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
ISO 5752:1982 Metal valves for use in flanged pipe systems Face-to-face and centre-to-face dimensions
ISO 13678:2010 Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
ASME PV CODE 6 : 2017 BOILER AND PRESSURE VESSEL CODE - RECOMMENDED RULES FOR THE CARE AND OPERATION OF HEATING BOILERS
API 526 : 2017 FLANGED STEEL PRESSURE-RELIEF VALVES
ISO 10423:2009 Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
API 6D :2015 SPECIFICATION FOR PIPELINE AND PIPING VALVES
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
ISO 10422:1993 Petroleum and natural gas industries — Threading, gauging, and thread inspection of casing, tubing and line pipe threads — Specification
ISO 3183-1:1996 Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A
ASME B16.9 : 2012 FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
API 14G : 2007 RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS
API 2G : 1ED 74 SUPP 1 RECOMMENDED PRACTICE FOR PRODUCTION FACILITIES ON OFFSHORE STRUCTURES
ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
API 520-2 : 2015 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION
ISO 13623:2017 Petroleum and natural gas industries — Pipeline transportation systems

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more