EN ISO 1523:2002
Current
Current
The latest, up-to-date edition.
Determination of flash point - Closed cup equilibrium method (ISO 1523:2002)
Published date
01-03-2002
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Term and definition
4 Principle
5 Chemicals and materials
6 Apparatus
7 Apparatus preparation
8 Sampling
9 Sample handling
10 Procedure
11 Calculation
12 Expression of result
13 Precision
14 Test report
Annex A (informative) Verification of apparatus
Bibliography
This International Standard specifies a method to determine the flash point of paints, varnishes, paint binders, solvents, petroleum or related products.This International Standard is not applicable to water-borne paints which may, however, be tested using ISO 3679.The method is suitable for use over the temperature range - 30 °C to 110 °C, depending on the use of different apparatus listed in Table 1.The interpretation of results obtained from solvent mixtures containing halogenated hydrocarbons should be considered with caution, as these mixtures can give anomalous results.
| Committee |
CEN/TC 19
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN ISO 1523:2002 | Identical |
| BS 2000-492(2002) : 2002 | Identical |
| NEN EN ISO 1523 : 2002 | Identical |
| NS EN ISO 1523 : 1ED 2002 | Identical |
| UNI EN ISO 1523 : 2005 | Identical |
| PN EN ISO 1523 : 2007 | Identical |
| UNE-EN ISO 1523:2003 | Identical |
| BS EN ISO 1523:2002 | Identical |
| DIN EN ISO 1523:2002-08 | Identical |
| IP 492 : 2003 | Identical |
| NBN EN ISO 1523 : 2002 | Identical |
| SN EN ISO 1523 : 2002 | Identical |
| ISO 1523:2002 | Identical |
| NF EN ISO 1523 : 2002 | Identical |
| 04/101637 DC : DRAFT JAN 2004 | ISO 19353 - SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
| PREN 3021 : DRAFT 2015 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| I.S. EN 3021:2017 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| CEN/TR 15138:2005 | Petroleum products and other liquids - Guide to flash point testing |
| CEN/TS 16811-3:2015 | Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods |
| I.S. EN 1860-3:2003 | APPLIANCES, SOLID FUELS AND FIRELIGHTERS FOR BARBECUEING - PART 3: FIRELIGHTERS FOR IGNITING SOLID FUELS FOR USE IN BARBECUE APPLIANCES - REQUIREMENTS AND TEST METHODS |
| ONORM EN 1860-3 : 2006 | APPLIANCES, SOLID FUELS AND FIRELIGHTERS FOR BARBECUING - PART 3: FIRELIGHTERS FOR IGNITING SOLID FUELS FOR USE IN BARBECUE - REQUIREMENTS AND TEST METHODS |
| PD CEN/TS 16811-3:2015 | Winter maintenance equipment. De-icing agents Other solid and liquid de-icing agents. Requirements and test methods |
| DIN EN 1860-3:2003-12 | Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecue appliances; Requirements and test methods; German version EN 1860-3:2003 |
| BS EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation Methods of test |
| I.S. EN 60455-2:2015 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| BS EN ISO 6744-1:2004 | Binders for paints and varnishes. Alkyd resins General methods |
| I.S. CEN/TR 15138:2005 | PETROLEUM PRODUCTS AND OTHER LIQUIDS - GUIDE TO FLASH POINT TESTING |
| ISO 6744-1:1999 | Binders for paints and varnishes — Alkyd resins — Part 1: General methods of test |
| EN ISO 1516:2002 | Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002) |
| EN 1860-3:2003/A1:2006 | APPLIANCES, SOLID FUELS AND FIRELIGHTERS FOR BARBECUEING - PART 3: FIRELIGHTERS FOR IGNITING SOLID FUELS FOR USE IN BARBECUE APPLIANCES - REQUIREMENTS AND TEST METHODS |
| EN ISO 6744-1:2004 | Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) |
| EN 3021:2017 | Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification |
| PD CEN/TR 15138:2005 | Petroleum products and other liquids. Guide to flash point testing |
| DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08 | WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| BS EN 3021:2017 | Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification |
| S.R. CEN/TS 16811-3:2015 | WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| BS EN 1860-3:2003 | Appliances, solid fuels and firelighters for barbecueing Firelighters for igniting solid fuels for use in barbecue appliances. Requirements and test methods |
| BS EN ISO 1516:2002 | Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method |
| DIN EN ISO 6744-1:2004-09 | Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) |
| DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08 | WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| ISO 1516:2002 | Determination of flash/no flash — Closed cup equilibrium method |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| EN ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013) |
| ISO Guide 33:2015 | Reference materials Good practice in using reference materials |
| ISO Guide 35:2017 | Reference materials Guidance for characterization and assessment of homogeneity and stability |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| EN ISO 1513:2010 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| EN 22719 : 1993 | PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| EN ISO 13736:2013 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| ISO 13736:2013 | Determination of flash point Abel closed-cup method |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.