EN ISO 15630-1:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010)
Superseded date
15-03-2019
Published date
15-10-2010
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Symbols
4 General provisions concerning test pieces
5 Tensile test
6 Bend test
7 Rebend test
8 Axial load fatigue test
9 Chemical analysis
10 Measurement of the geometrical characteristics
11 Determination of the relative rib or indentation area
(f[R] or f[P])
12 Determination of deviation from nominal mass per metre
13 Test report
Bibliography
ISO 15630-1:2010 specifies test methods applicable to reinforcing bars, wire rod and wire for concrete.
| Committee |
CEN/TC 459/SC 4
|
| DevelopmentNote |
Supersedes ENV 10080. (07/2002)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN ISO 15630-1:2010 | Identical |
| ONORM EN ISO 15630-1 : 2011 | Identical |
| DIN EN ISO 15630-1:2011-02 | Identical |
| UNI EN ISO 15630-1 : 2019 | Identical |
| NBN EN ISO 15630-1 : 2010 | Identical |
| BS EN ISO 15630-1:2010 | Identical |
| I.S. EN ISO 15630-1:2019 | Identical |
| NS EN ISO 15630-1 : 2010 | Identical |
| NS-EN ISO 15630-1:2019 | Identical |
| UNI EN ISO 15630-1 : 2010 | Identical |
| PN EN ISO 15630-1 : 2011 | Identical |
| PN-EN ISO 15630-1 : 2019 | Identical |
| ISO 15630-1:2019 | Identical |
| DIN EN ISO 15630-1 E : 2011 | Identical |
| UNE-EN ISO 15630-1:2003 | Identical |
| ISO 15630-1:2010 | Identical |
| SN EN ISO 15630-1 : 2010 | Identical |
| ÖNORM EN ISO 15630-1: 2019 | Identical |
| NEN EN ISO 15630-1 : 2010 | Identical |
| NF EN ISO 15630-1 : 2010 | Identical |
| BS EN ISO 15630-1:2019 | Identical |
| UNE-EN ISO 15630-1:2011 | Identical |
| 15/30328765 DC : 0 | BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| DIN V 1201:2004-08 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED FOR DRAINS AND SEWERS - TYPE 1 AND TYPE 2 - REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY |
| 12/30268276 DC : 0 | BS EN 12602:2008/A1 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| PREN 12602 : DRAFT 2015 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| BS EN 13877-3:2004 | Concrete pavements Specifications for dowels to be used in concrete pavements |
| EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| 04/30127156 DC : DRAFT DEC 2004 | EN ISO 17660-2 - WELDING - WELDING OF REINFORCING STEEL - PART 2: NON-LOAD BEARING WELDED JOINTS |
| CEN/TR 15481:2006 | Welding of reinforcing steel - Tack weldability - Test methods and performance requirements |
| 04/30127152 DC : DRAFT DEC 2004 | EN ISO 17660-1 - WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD BEARING WELDED JOINTS |
| DIN EN 12602:2015-12 (Draft) | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| I.S. CEN/TR 15481:2006 | WELDING OF REINFORCING STEEL - TACK WELDABILITY - TEST METHODS AND PERFORMANCE REQUIREMENTS |
| DIN EN 12602:2016-12 | Prefabricated reinforced components of autoclaved aerated concrete |
| UNI EN 10080 : 2005 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL |
| I.S. EN 10080:2005 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL |
| BS EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| PREN 10348-2 : DRAFT 2016 | STEEL FOR THE REINFORCEMENT OF CONCRETE - GALVANIZED REINFORCING STEEL - PART 2: GALVANIZED REINFORCING STEEL PRODUCTS |
| EN 13877-3:2004 | Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements |
| 16/30340708 DC : 0 | BS EN 10348-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - GALVANIZED REINFORCING STEEL - PART 2: GALVANIZED REINFORCING STEEL PRODUCTS |
| UNE-EN 12602:2011 | Prefabricated reinforced components of autoclaved aerated concrete |
| I.S. EN 12602:2016 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| DIN EN 13877-3:2005-02 | Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| DIN EN 10080:2005-08 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL |
| ISO 4945:1977 | Steel Determination of nitrogen content Spectrophotometric method |
| ISO 10701:1994 | Steel and iron — Determination of sulfur content — Methylene blue spectrophotometric method |
| ISO 13898-2:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 2: Determination of nickel content |
| ISO 671:1982 | Steel and cast iron Determination of sulphur content Combustion titrimetric method |
| ISO 4947:1986 | Steel and cast iron Determination of vanadium content Potentiometric titration method |
| ISO 10697-1:1992 | Steel — Determination of calcium content by flame atomic absorption spectrometry — Part 1: Determination of acid-soluble calcium content |
| ISO 15353:2001 | Steel and iron — Determination of tin content — Flame atomic absorption spectrometric method (extraction as Sn-SCN) |
| ISO 4946:2016 | Steel and cast iron Determination of copper 2,2'-Biquinoline spectrophotometric method |
| ISO/TR 17055:2002 | Steel Determination of silicon content Inductively coupled plasma atomic emission spectrometric method |
| ISO 11652:1997 | Steel and iron Determination of cobalt content Flame atomic absorption spectrometric method |
| ISO 17053:2005 | Steel and iron Determination of oxygen Infrared method after fusion under inert gas |
| ISO 10702:1993 | Steel and iron — Determination of nitrogen content — Titrimetric method after distillation |
| ISO 13898-3:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 3: Determination of copper content |
| ISO 4829-1:1986 | Steel and cast iron Determination of total silicon content Reduced molybdosilicate spectrophotometric method Part 1: Silicon contents between 0,05 and 1,0 % |
| ISO 4941:1994 | Steel and iron — Determination of molybdenum content — Thiocyanate spectrophotometric method |
| ISO 13900:1997 | Steel — Determination of boron content — Curcumin spectrophotometric method after distillation |
| ISO 10278:1995 | Steel — Determination of manganese content — Inductively coupled plasma atomic emission spectrometric method |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 4937:1986 | Steel and iron — Determination of chromium content — Potentiometric or visual titration method |
| ISO 13902:1997 | Steel and iron — Determination of high sulfur content — Infrared absorption method after combustion in an induction furnace |
| ISO 4943:1985 | Steel and cast iron — Determination of copper content — Flame atomic absorption spectrometric method |
| ISO 629:1982 | Steel and cast iron — Determination of manganese content — Spectrophotometric method |
| ISO 4939:2016 | Steel Determination of nickel Dimethylglyoxime spectrophotometric method |
| ISO 4935:1989 | Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace |
| ISO 17058:2004 | Steel and iron — Determination of arsenic content — Spectrophotometric method |
| ISO/TR 15349-3:1998 | Unalloyed steel Determination of low carbon content Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating) |
| ISO 13898-4:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 4: Determination of cobalt content |
| ISO/TS 13899-3:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 3: Determination of W content |
| ISO 10280:1991 | Steel and iron — Determination of titanium content — Diantipyrylmethane spectrometric method |
| ISO 4938:2016 | Steel and iron Determination of nickel content Gravimetric or titrimetric method |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| ISO/TR 10719:1994 | Steel and iron Determination of non-combined carbon content Infrared absorption method after combustion in an induction furnace |
| ISO 439:1994 | Steel and iron Determination of total silicon content Gravimetric method |
| ISO 7438:2016 | Metallic materials Bend test |
| ISO 11653:1997 | Steel — Determination of high cobalt content — Potentiometric titration method after separation by ion exchange |
| ISO 4942:2016 | Steels and irons Determination of vanadium content N-BPHA spectrophotometric method |
| ISO/TR 4830-4:1978 | Steel Determination of low carbon contents Part 4: Coulometric method after combustion |
| ISO 437:1982 | Steel and cast iron Determination of total carbon content Combustion gravimetric method |
| ISO 9658:1990 | Steel — Determination of aluminium content — Flame atomic absorption spectrometric method |
| ISO/TS 13899-1:2004 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 1: Determination of Mo content |
| ISO 4940:1985 | Steel and cast iron — Determination of nickel content — Flame atomic absorption spectrometric method |
| ISO 10700:1994 | Steel and iron — Determination of manganese content — Flame atomic absorption spectrometric method |
| ISO 15351:1999 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| ISO 10714:1992 | Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method |
| ISO 4829-2:2016 | Steels Determination of total silicon contents Reduced molybdosilicate spectrophotometric method Part 2: Silicon contents between 0,01 % and 0,05 % |
| ISO 15349-2:1999 | Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) |
| ISO 17054:2010 | Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique |
| ISO 9647:1989 | Steel and iron Determination of vanadium content Flame atomic absorption spectrometric method |
| ISO 13899-2:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 2: Determination of Nb content |
| ISO 9441:1988 | Steel — Determination of niobium content — PAR spectrophotometric method |
| ISO 15350:2000 | Steel and iron — Determination of total carbon and sulfur content — Infrared absorption method after combustion in an induction furnace (routine method) |
| ISO 13898-1:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 1: General requirements and sample dissolution |
| ISO 9556:1989 | Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| ISO 4934:2003 | Steel and iron Determination of sulfur content Gravimetric method |
| ISO 16918-1:2009 | Steel and iron Determination of nine elements by the inductively coupled plasma mass spectrometric method Part 1: Determination of tin, antimony, cerium, lead and bismuth |
| ISO 10720:1997 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas |
| ISO 10153:1997 | Steel Determination of boron content Curcumin spectrophotometric method |
| ISO 10698:1994 | Steel — Determination of antimony content — Electrothermal atomic absorption spectrometric method |
| ISO 10138:1991 | Steel and iron — Determination of chromium content — Flame atomic absorption spectrometric method |
| ISO 10697-2:1994 | Steel — Determination of calcium content by flame atomic absorption spectrometry — Part 2: Determination of total calcium content |
| ISO/TR 15349-1:1998 | Unalloyed steel Determination of low carbon content Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) |
| ISO 15355:1999 | Steel and iron — Determination of chromium content — Indirect titration method |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.