EN ISO 3171:1999
Current
Current
The latest, up-to-date edition.
Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)
Published date
24-03-1999
Publisher
0 Introduction
1 Scope and field of application
2 References
3 Definitions
4 Principles
5 Selection of sampling point (including stream
conditioning)
6 Profile testing
7 Sampling design and installation
9 Control equipment
10 Flow measurement
11 Sample receivers and containers
12 Sample handling
13 Safety precautions
14 Operating procedures
15 Proving the sampling system
16 Estimation of overall sampling system uncertainty
17 Bibliography
Annex A Estimating water-in-oil dispersion
Annex B Example of water concentration profile tests at a
crude oil terminal
Annex C Guide for initial screening of potential sampling
locations
Recommends procedures for crude oil and liquid petroleum products being conveyed by pipeline. Does not apply to liquefied petroleum gases and liquefied natural gases. The principal purpose ist to give guidelines for specifying, testing, operating, maintaining and monitoring crude oil samples.
| Committee |
CEN/TC 19
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| IP 476 : 2002 | Identical |
| NS EN ISO 3171 : 1ED 1999 | Identical |
| BS EN ISO 3171:1999 | Identical |
| NEN EN ISO 3171 : 1999 | Identical |
| UNI EN ISO 3171 : 2001 | Identical |
| BS 2000-476(2002) : 2002 | Identical |
| PN EN ISO 3171 : 2007 | Identical |
| NBN EN ISO 3171 : 1999 | Identical |
| UNE-EN ISO 3171:1999 | Identical |
| ISO 3171:1988 | Identical |
| NF EN ISO 3171 : 1999 | Identical |
| SS-EN ISO 3171:1999 | Identical |
| DIN EN ISO 3171:2000-11 | Identical |
| I.S. EN ISO 3171:1999 | Identical |
| SN EN ISO 3171 : 2000 | Identical |
| BS 2000-609(2012) : 2012 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS EN 16734 : 2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| DIN EN 16715 E : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| DIN EN 16270:2015-08 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| DIN EN 16136:2015-04 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| 14/30299493 DC : 0 | BS EN 14112 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| I.S. CEN TR 15367-3:2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
| 09/30206692 DC : 0 | BS EN 228 - AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| 14/30294041 DC : 0 | BS EN 16709 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 OR B30) - REQUIREMENTS AND TEST METHODS |
| BS EN 16997:2017 | Liquid petroleum products. Determination of the sulfur content in Ethanol (E85) automotive fuel. Wavelength dispersive X-ray fluorescence spectrometric method |
| PD CEN/TR 16557:2013 | Automotive fuels. High FAME diesel fuel blends (B11-B30). Background to the parameters required and their respective limits and determination |
| 10/30228224 DC : 0 | BS EN 16136 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS EN 16329:2013 | Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method |
| I.S. EN 14517:2004 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD |
| 12/30267087 DC : 0 | BS EN 16476 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOLD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
| I.S. EN 14078:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| I.S. EN 12662:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| BS EN 16640:2017 | Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method |
| S.R. CEN/TR 15367-2:2007 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 2: AUTOMOTIVE PETROL FUELS |
| 09/30205523 DC : 0 | BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| BS 2000-579(2009) : 2009 COR 2010 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS EN 16761-1:2015 | Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using single column technique |
| DIN EN 16761-1 E : 2016 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| I.S. EN 116:2015 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| UNE-EN 16934:2018 | Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE |
| BS 2000-465(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| 13/30274224 DC : 0 | BS EN 14078 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS EN 15938:2010 | Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity |
| DIN EN 15794:2010-02 | Determination of explosion points of flammable liquids |
| 14/30294038 DC : 0 | BS EN 16270 - AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHY METHOD |
| BS 2000-606(2015) : 2015 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| BS EN 16143:2013 | Petroleum products. Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils. Procedure using double LC cleaning and GC/MS analysis |
| DIN EN 16568 E : 2015 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| S.R. CEN TS 15293:2011 | AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14522:2005 | DETERMINATION OF THE AUTO IGNITION TEMPERATURE OF GASES AND VAPOURS |
| BS EN 16135:2011 | Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS) |
| 11/30244505 DC : 0 | BS EN 16294 - PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICPOES) |
| 13/30277078 DC : 0 | BS EN 16568 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| DD CEN/TS 15293:2011 | Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods |
| BS EN 15944:2010 | Liquid petroleum products. Determination of nickel and vanadium content. Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| 12/30264358 DC : 0 | BS EN 1601 - LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID) |
| IP 606 : 2016 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| IP PM EA : 2013 | DETERMINATION OF THE FILTER BLOCKING TENDENCY OF FATTY ACID METHYL ESTERS (FAME) AND DIESEL FUELS CONTAINING FAME - COLD SOAK AND FILTRATION METHOD |
| DIN EN 16143:2013-05 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| IP 336 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN 16785-1:2015 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| IP 309 : 2016 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| I.S. EN 16934:2017 | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| S.R. CEN/TS 15940:2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16143:2013 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| S.R. CEN/TS 16640:2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| I.S. EN 16715:2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| UNE-EN 15779:2010 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (>= 4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography |
| BS 2000-595(2011) : 2011 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| EN 16709:2015/AC:2016 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| DIN EN 16640:2015-09 (Draft) | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS EN 12916:2016 | Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection |
| DIN EN 16997:2016-05 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| 17/30363912 DC : 0 | BS EN 17178 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE |
| I.S. EN 16640:2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| EN 16734:2016 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
| BS 2000-547(2006) : 2006 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS 2000-574(2014) : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| I.S. EN 13016-3:2018 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD) |
| BS EN 16709 : 2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| I.S. EN 13132:2000 | LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY USING COLUMN SWITCHING |
| I.S. EN 228:2017 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15553:2007 | PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
| BS EN 14538:2006 | Fat and oil derivatives. Fatty acid methyl ester (FAME). Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| BS EN 14517:2004 | Methods of test for petroleum and its products. BS 2000-526: Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method |
| BS EN 15199-2:2006 | Petroleum products. Determination of boiling range distribution by gas chromatography method Heavy distillates and residual fuel |
| BS EN 12662:2014 | Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| BS EN 14077:2003 | Petroleum products. Determination of organic halogen content. Oxidative microcoulometric method |
| BS EN 14078:2014 | Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method |
| DIN EN 15938:2010-12 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| EN 12766-1:2000 | Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
| DIN EN 228:2004-03 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| DIN EN 15944:2011-02 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| DIN EN 15199-1:2007-01 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils |
| EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| CEN/TS 16640 : 2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| DIN EN 1601:2017-10 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| EN 16640:2017/AC:2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| EN 13016-2:2007 | Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure(AVP) between 40 C and 100 C |
| EN 12662:2014 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| DIN EN 16294:2013-02 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| PREN 12662 : DRAFT 2012 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| BS 2000-606(2012) : 2012 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL - GAS CHROMATOGRAPHIC METHOD |
| BS EN 16715:2015 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| S.R. CWA 15940:2009 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| PREN 16135 : DRAFT 2010 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (AAS) |
| 13/30286630 DC : 0 | BS EN 16136 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| I.S. EN 14213:2003 | HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
| 13/30277780 DC : 0 | BS EN 16576 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DISTILLATE FUELS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| 08/30183846 DC : DRAFT AUG 2008 | BS EN 14078 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| DIN EN 16761-1:2016-02 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| ONORM EN 15199-3 : 2009 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| UNE-EN 16997:2017 | Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method |
| BS EN 16270:2015 | Automotive fuels. Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel. Gas chromatographic method |
| I.S. EN 16734:2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| DIN EN 15199-4 E : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL |
| 12/30268200 DC : 0 | BS EN 15751 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| DIN EN 16576 E : 2015 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| 14/30298209 DC : 0 | BS EN 16734 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| DIN EN 15751 E : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| PD CEN/TR 15367-3:2009 | Petroleum products. Guide for good housekeeping Prevention of cross contamination |
| 10/30205520 DC : 0 | BS EN 16144 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD |
| PREN 13016-3 : DRAFT 2016 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD) |
| PREN 15195 : DRAFT 2013 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| PREN 17057 : DRAFT 2016 | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID |
| BS EN 15199-4:2015 | Petroleum products. Determination of boiling range distribution by gas chromatography method Light fractions of crude oil |
| BS 2000-480(2006) : 2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS |
| BS 2000-589(2015) : 2015 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| I.S. EN 15199-3:2008 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| CR 13840:2000 | Petroleum products - Determination of polycyclic aromatic hydrocarbons - Ultraviolet (UV) spectrometric method |
| PREN 16761-2 : DRAFT 2014 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| UNE-EN 16896:2017 | Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter |
| BS 2000-588(2011) : 2011 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 16709:2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| DIN EN 15940:2016-09 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16136:2015 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| I.S. EN 16091:2011 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| BS 2000-462(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-462: PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 1: SEPARATION AND DETERMINATION OF SELECTED PCB CONGENERS BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD) |
| CR 13838:2000 | Automotive diesel fuels - Determination of filtrability - AGELFI method |
| BS EN 16136:2015 | Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| UNI EN 16091 : 2012 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| DIN EN 590:2017-10 | Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017) |
| UNE-EN 16136:2015 | Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| EN 17057:2018 | Automotive fuels and fat and oil derivates - Determination of saturated monoglycerides content in Fatty Acid Methyl Esters (FAME) - Method by GC-FID |
| UNI EN 15779 : 2013 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNI EN 15794 : 2009 | DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| I.S. EN 237:2004 | LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY |
| I.S. EN 12916:2016 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| DIN EN 1601:2016-06 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| DIN EN 13016-2:2007-11 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE VAPOUR PRESSURE (AVP) BETWEEN 40 DEGREE C AND 100 DEGREE C |
| DIN EN 12662:2014-07 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| DIN EN 14214:2014-06 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 1601:2018 | Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) |
| UNE-EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
| I.S. EN ISO 8754:2003 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN 15199-2:2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS |
| I.S. EN 15199-1:2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS |
| DIN EN 12662:1998-10 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| EN 14112:2016 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
| EN 15199-1:2006 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils |
| EN 15199-3:2008 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil |
| I.S. EN 14112:2016 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| EN 15199-2:2006 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels |
| DIN EN 16640:2017-08 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS EN 16576:2014 | Automotive fuels. Determination of manganese and iron content in diesel. Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| UNI EN 15751 : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| BS EN 15199-3:2008 | Petroleum products. Determination of boiling range distribution by gas chromatography method Crude oil |
| 08/30176795 DC : DRAFT APR 2008 | BS EN 15779 - FATS AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES - DETERMINATION OF POLY-UNSATURATED FATTY ACID METHYL ESTERS BY GAS CHROMATOGRAPHY |
| 01/122379 DC : DRAFT JULY 2001 | BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| BS EN 15751:2014 | Automotive fuels. Fatty acid methyl ester (FAME) fuel and blends with diesel fuel. Determination of oxidation stability by accelerated oxidation method |
| 10/30216576 DC : 0 | BS EN 16091 - LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| PD CEN/TR 16514:2013 | Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol |
| 14/30300905 DC : 0 | BS EN 16761-2 - AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| 13/30282501 DC : 0 | BS EN 15195 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| BS 2000-309(2015) : 2015 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| 09/30199323 DC : 0 | BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL REQUIREMENTS AND TEST METHODS |
| DIN EN 15779:2013-12 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (<groesser |
| 14/30295249 DC : 0 | BS EN 16715 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| BS 2000-156(2007) : 2007 | PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
| I.S. EN 16896:2016 | PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER |
| 16/30339201 DC : 0 | BS EN 1601 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| 11/30251420 DC : 0 | BS EN 16329 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| DIN EN 16761-2 E : 2016 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| BS EN 16761-2:2015 | Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using heart cut technique |
| BS EN 16934:2017 | Automotive fuels and fat and oil derivates, Determination of steryl glycosides in fatty acid methyl esters (FAME). Method by GC-MS with prior purification by SPE |
| 10/30228221 DC : 0 | BS EN 16135 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (AAS) |
| DIN EN 15779 E : 2013 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>/= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| 15/30325297 DC : 0 | BS EN 16896 - PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER VISCOMETER |
| DIN EN 15751:2014-06 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| DIN EN 14214 E : 2003 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15199-4:2015 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL |
| BS 2000-489(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF LOW LEAD CONTENTS IN GASOLINES - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (XRF) |
| 11/30242687 DC : DRAFT APR 2011 | BS EN 16270 - AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS IN PETROL - GAS CHROMATOGRAPHIC METHOD |
| BS EN 15794:2009 | Determination of explosion points of flammable liquids |
| 16/30346963 DC : 0 | BS EN 17057 - AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID |
| 09/30185734 DC : 0 | BS EN 116/BS 2000-309 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT |
| 12/30266121 DC : 0 | BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| 14/30304809 DC : 0 | BS EN 16785 - BIO-BASED PRODUCTS - DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| BS EN 16144:2012 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method |
| BS 2000-4(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-4: DETERMINATION OF ASH |
| BS 2000-605(2013) : 2013 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| 01/124546 DC : DRAFT JAN 2002 | PREN 237 LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY |
| PREN 590 : DRAFT 2011 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| 14/30310326 DC : 0 | BS EN 15940 - AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| DIN EN 16144:2012-05 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| UNE-EN 16761-1:2016 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique |
| IP 498 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| I.S. EN 16761-2:2015 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| I.S. EN 13016-1:2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) |
| I.S. CWA 15145:2005 | AUTOMOTIVE FUELS - WATER IN DIESEL FUEL EMULSIONS FOR USE IN INTERNAL COMBUSTION ENGINES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 16734:2017 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
| I.S. EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TR 15367-3 : 2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
| I.S. EN 16997:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| BS 2000-79(2009) : 2009 COR 2010 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS 2000-428(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-428: LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY |
| I.S. EN 15940:2016 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| EN 13016-1:2018 | Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) |
| DIN EN 16709 E : 2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| UNE-EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| PREN 14078 : DRAFT 2013 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
| DIN EN 12916:2016-06 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| NF EN 15938 : 2011 | AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| UNI EN 16143 : 2013 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| PREN 17178 : DRAFT 2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE |
| EN 15199-4:2015 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| UNI EN 14214 : 2014 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| S.R. CR 13837:2000 | AUTOMOTIVE DIESEL FUELS - DETERMINATION OF FILTRABILITY - SFPP METHOD |
| I.S. EN 12766-1:2000 | PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - SEPARATION AND DETERMINATION OF SELECTED PCB CONGENERS BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD) |
| I.S. EN 14538:2006 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| S.R. CR 13838:2000 | AUTOMOTIVE DIESEL FUELS - DETERMINATION OF FILTRABILITY - AGELFI METHOD |
| DIN EN 15553 E : 2007 | PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
| DIN EN 14522 E : 2005 | DETERMINATION OF THE AUTO IGNITION TEMPERATURE OF GASES AND VAPOURS |
| DIN EN 15195 E : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| UNE-EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| UNE-EN 16640:2017 | Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method |
| CEN/TR 15367-1:2014 | PETROLEUM PRODUCTS - GUIDELINES FOR GOOD HOUSEKEEPING - PART 1: AUTOMOTIVE DIESEL FUELS |
| BS EN 241:2000 | Methods of test for petroleum and its products. Liquid petroleum products. Determination of sodium content. Atomic absorption spectrometric method |
| BS EN ISO 6245:2002 | Methods of test for petroleum and its products. BS 2000-4: Determination of ash |
| BS EN ISO 8754:2003 | Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence spectrometry |
| UNE-EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| UNE-EN 15944:2011 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| DIN EN 228:2017-08 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| EN 14214:2012+A1:2014/AC:2014 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| EN ISO 8754:2003 | Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003) |
| EN 16576 : 2014 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| UNI EN 15938 : 2010 | AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| UNI EN 15195 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| UNI EN 14078 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| UNI EN 15944 : 2011 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES) |
| UNI EN 12662 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| EN 16934:2017 | Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE |
| DIN EN 16896:2015-09 (Draft) | PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER |
| UNE-EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
| DIN EN 16091:2012-02 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| DIN EN 16329:2013-07 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| BS 2000-409(2007) : 2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE PRESSURE (AVP) BETWEEN 40 DEGREES C AND 100 DEGREES C |
| BS 2000-612(2013) : 2013 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| DIN EN 15940 E : 2016 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| 15/30330667 DC : 0 | BS EN 16934 - AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTER (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| DIN EN 13016-1:2007-11 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT |
| UNI EN 16476 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| 14/30297823 DC : 0 | BS EN 15199-4 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL |
| PD CEN/TR 15367-1:2014 | Petroleum products. Guidelines for good housekeeping Automotive diesel fuels |
| I.S. EN 15195:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| 14/30304453 DC : 0 | BS EN 12916 - PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| I.S. EN 13016-2:2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE PRESSURE (AVP) BETWEEN 40 DEGREES C AND 100 DEGREES C |
| DIN EN 16934 E : 2017 | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| CR 13837:2000 | Automotive diesel fuels - Determination of filtrability - SFPP method |
| 04/30113923 DC : DRAFT MAY 2004 | EN 12916 - PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| CEN/TR 16557:2013 | Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination |
| PREN 228 : DRAFT 2009 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| BS EN 16896:2016 | Petroleum products and related products. Determination of kinematic viscosity. Method by Stabinger type viscosimeter |
| I.S. EN 15779:2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS 2000-156(2005) : 2005 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 156: DETERMINATION OF HYDROCARBON TYPES IN PETROLEUM PRODUCTS - FLUORESCENT INDICATOR ADSORPTION METHOD |
| IP PM ET : 2016 | CRUDE OIL - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| BS EN 15779 : 2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS 2000-620(2014) : 2014 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| BS 2000-464(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM CONTENT - ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| DIN EN 16476:2014-07 | Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| PREN 14538 : DRAFT 2002 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA AND MG CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| PREN 14214 : DRAFT 2009 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| CR 13839:2000 | Petroleum products - Determination of aromaticity - 13C nuclear magnetic resonance (NMR) spectrometric method |
| 09/30200031 DC : 0 | BS EN 15938 - AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| 08/30176860 DC : DRAFT APR 2008 | BS EN 15794 - DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| BS EN 16785-1:2015 | Bio-based products. Bio-based content Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| PREN 116 : DRAFT 2009 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT |
| BS EN 16568:2014 | Automotive fuels. Blends of Fatty acid methyl ester (FAME) with diesel fuel. Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C |
| DIN EN 16785-1 E : 2016 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| UNE-EN 16785-1:2016 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| 15/30326182 DC : 0 | BS EN 16906 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| 15/30326869 DC : 0 | BS EN 16640 - BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| EI HM 68 : 2011 | PROCEDURES FOR BULK LIQUID FATTY ACID METHYL ESTERS (FAME) AND BLENDED BIODIESEL CARGO INSPECTIONS |
| UNE-EN 16091:2012 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| 07/30166903 DC : DRAFT AUG 2007 | BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF CONTAMINATION IN MIDDLE DISTILLATES |
| 02/123664 DC : DRAFT SEP 2002 | BS EN 14538 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA AND MG CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| UNI CEN/TS 16640 : 2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| BS 2000-408(2014) : 2014 COR 2014 | LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID) |
| UNE-EN 16270:2015 | Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method |
| BS 2000-123(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| DIN EN 16568:2015-03 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| IP PM ES : 2016 | DETERMINATION OF COLD FILTER BLOCKING TENDENCY |
| UNI EN 15199-3 : 2008 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| BS 2000-498(2007) : 2007 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| I.S. EN 16576:2014 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| I.S. EN 17057:2018 | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID |
| EN 590:2013 | Automotive fuels - Diesel - Requirements and test methods |
| I.S. EN 16144:2012 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD |
| S.R. CEN/TR 16514:2013 | AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL |
| PREN 1601 : DRAFT 2016 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| I.S. EN 15938:2010 | AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| I.S. EN 16329:2013 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| BS 2000-394(2007) : 2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) |
| BS EN 13016-1:2007 | Liquid petroleum products. Vapour pressure Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) |
| 17/30361216 DC : 0 | BS EN 14110 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT |
| CEN/TR 15367-2:2007 | Petroleum products - Guide for good housekeeping - Part 2: Automotive petrol fuels |
| 16/30336428 DC : 0 | BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
| PREN 15293 : DRAFT 2016 | AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14214:2013 | Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods |
| I.S. EN 15944:2010 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES) |
| S.R. CR 13839:2000 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATICITY - [13]C NUCLEAR MAGNETIC RESONANCE (NMR) SPECTROMETRIC METHOD |
| S.R. CR 13840:2000 | PETROLEUM PRODUCTS - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS - ULTRAVIOLET (UV) SPECTROMETRIC METHOD |
| I.S. EN 15794:2009 | DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| DIN EN 14538 E : 2006 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS EN 15553:2007 | Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method |
| BS EN 14213:2003 | Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods |
| BS EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| BS EN 15195:2014 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| ISO 6245:2001 | Petroleum products — Determination of ash |
| ISO 8754:2003 | Petroleum products Determination of sulfur content Energy-dispersive X-ray fluorescence spectrometry |
| BS EN 13016-2:2007 | Liquid petroleum products. Vapour pressure Determination of absolute vapour pressure (AVP) between 40°C and 100°C |
| BS EN 14112:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of oxidation stability (accelerated oxidation test) |
| UNE-EN 15938:2011 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| DIN EN 15553:2007-07 | Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method |
| UNE-EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
| BS EN 15199-1:2006 | Petroleum products. Determination of boiling range distribution by gas chromatography method Middle distillates and lubricating base oils |
| DIN EN 15195:2015-02 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| EN 16294:2012 | Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| EN ISO 1516:2002 | Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002) |
| EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| EN 1601:2017 | Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) |
| EN ISO 3735:1999 | Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999) |
| EN 16997:2017 | Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method |
| EN 14213:2003/AC:2003 | HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
| EN 16270:2015 | Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method |
| EN 16785-1:2015 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
| EN 13723:2002 | Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF) |
| EN 15779:2009+A1:2013 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography |
| EN 14517:2004 | Liquid petroleum products - Determination of hydrocarbon types and oxygenates in petrol - Multidimensional gas chromatography method |
| EN 14538:2006 | Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| EI 1598 : 2012 | DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC SENSORS TO MONITOR FREE WATER AND/OR PARTICULATE MATTER IN AVIATION FUEL |
| EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
| EN 16568:2014 | Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C |
| EN 237:2004 | Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry |
| EN 16761-1:2015 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique |
| EN 14331:2004 | Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method |
| EN 15195:2014 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| EN 241:2000 | Liquid petroleum products - Determination of sodium content - Atomic absorption spectrometric method |
| EN 15938:2010 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| EN 16136:2015 | Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| EN 16143:2013 | Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis |
| EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| EN 16091:2011 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| EN 15944:2010 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| EN 14077:2003 | Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method |
| EN ISO 1523:2002 | Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
| EN 16715 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| EN 16761-2 : 2015 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| EN 16135:2011 | Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS) |
| EN 15794:2009 | Determination of explosion points of flammable liquids |
| EN ISO 6245:2002 | Petroleum products - Determination of ash (ISO 6245:2001) |
| EN 16476:2014 | Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| EN 16906:2017 | Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method |
| PD CEN/TR 15367-2:2007 | Petroleum products. Guide for good housekeeping Automotive petrol fuels |
| DIN EN 16640 E : 2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| PREN 14110 : DRAFT 2017 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT |
| BS 2000-507(2006) : 2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS |
| DIN EN 16135:2012-02 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 14/30300902 DC : 0 | BS EN 16761-1 - AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| BS EN 16294:2012 | Petroleum products and fat and oil derivatives. Determination of phosphorus content in fatty acid methyl esters (FAME). Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| PREN 12916 : DRAFT 2014 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| BS EN 16476:2014 | Liquid petroleum products. Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel. Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| DIN EN 16785-1:2016-03 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| UNE-EN 15199-4:2015 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| I.S. EN 16568:2014 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| 08/30172824 DC : DRAFT JAN 2008 | BS EN 15751 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| PREN 14112 : DRAFT 2014 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| PREN 16136 : DRAFT 2013 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| DIN EN 16896 E : 2017 | PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER |
| BS 2000-510(2004) : 2004 | PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD |
| I.S. EN 1601:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| IP 615 : 2016 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| DIN EN 16476 E : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| UNE-EN 16715:2016 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| DIN EN 15938 E : 2010 | AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| DIN EN 16761-2:2016-02 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| DIN EN 15794 E : 2010 | DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| 11/30249539 DC : 0 | BS EN 590 - AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| PD CEN/TS 16640:2014 | Bio-based products. Determination of the bio based carbon content of products using the radiocarbon method |
| DIN EN 15944 E : 2011 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES) |
| UNI CEN/TS 15940 : 2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| DIN EN 15199-3:2008-09 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil |
| NF EN 15944 : 2011 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| BS 2000-129(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 129: DETERMINATION OF BROMINE NUMBER - COLOUR INDICATOR TITRATION METHOD |
| DIN EN 16576:2015-02 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| 16/30327612 DC : 0 | BS EN 13016-3 - LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD) |
| BS EN 16906:2017 | Liquid petroleum products. Determination of the ignition quality of diesel fuels. BASF engine method |
| BS EN 16091:2011 | Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blends. Determination of oxidation stability by rapid small scale oxidation method |
| DIN EN 16715:2015-10 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| UNI EN 16135 : 2012 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 06/30152427 DC : 0 | BS EN 15199-3 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| UNI EN 16294 : 2013 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS 2000-589(2011) : 2011 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS 2000-498(2014) : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| I.S. EN 16270:2015 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| 09/30201423 DC : 0 | BS EN 15944 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| I.S. EN 16476:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| BS 2000-336(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-336: PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| DIN EN 16997 E : 2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| DIN EN 15199-4:2015-12 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| DIN EN 16906 E : 2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| BS 2000-578(2009) : 2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| S.R. CEN/TR 16557:2013 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL BLENDS (B11 - B30) - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION |
| S.R. CEN/TR 15367-1:2014 | PETROLEUM PRODUCTS - GUIDELINES FOR GOOD HOUSEKEEPING - PART 1: AUTOMOTIVE DIESEL FUELS |
| UNE-EN 16761-2:2016 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique |
| I.S. EN 16135:2011 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS 2000-574(2009) : 2009 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| CEN/TR 15367-3:2009 | Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination |
| I.S. EN 16906:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| I.S. EN 16294:2012 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| I.S. EN 16761-1:2015 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| I.S. EN 590:2013+A1:2017&LC:2017 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| PREN 17155 : DRAFT 2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
| DIN EN 16709:2015-12 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| BS EN 590 : 2013 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| 17/30360226 DC : 0 | BS EN 17155 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
| DIN EN 16906:2015-09 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| DIN EN 16934:2015-12 (Draft) | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| EN 13016-3:2018 | Liquid petroleum products - Vapour pressure - Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method) |
| IP 578 : 2015 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| UNE-EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| UNE-EN 16709:2016 | Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods |
| I.S. EN 15751:2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| I.S. CWA 15293:2005 | AUTOMOTIVE FUELS - ETHANOL E85 - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14077:2004 | PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD |
| I.S. EN 14331:2004 | LIQUID PETROLEUM PRODUCTS - SEPARATION AND CHARACTERISATION OF FATTY ACID METHYL ESTERS (FAME) FROM MIDDLE DISTILLATES - LIQUID CHROMATOGRAPHY (LC)/GAS CHROMATOGRAPHY (GC) METHOD |
| DIN EN 14213 E : 2003 | HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
| DIN EN 14331 E : 2004 | LIQUID PETROLEUM PRODUCTS - SEPARATION AND CHARACTERISATION OF FATTY ACID METHYL ESTERS (FAME) FROM MIDDLE DISTILLATE FUELS - LIQUID CHROMATOGRAPHY (LC)/GAS CHROMATOGRAPHY (GC) METHOD |
| DIN EN 14078:2014-09 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS EN ISO 1523:2002 | Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
| BS EN 237:2004 | Methods of test for petroleum and its products BS 2000-428: Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry |
| UNE-EN 590:2014 | Automotive fuels - Diesel - Requirements and test methods |
| UNE-EN 14112:2017 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
| BS EN 14331:2004 | Liquid petroleum products. Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates. Liquid chromatography (LC)/gas chromatography (GC) method |
| BS EN 116:2015 | Diesel and domestic heating fuels. Determination of cold filter plugging point. Stepwise cooling bath method |
| BS EN 1601:2017 | Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID) |
| BS EN 12766-1:2000 | Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
| BS EN 13723:2002 | Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X-ray fluorescence spectrometry (XRF) |
| BS EN ISO 1516:2002 | Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method |
| DIN EN 14331:2004-06 | Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillate fuels - Liquid chromatography (LC)/gas chromatography (GC) method |
| DIN EN 237:2004-12 | Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry |
| CEN/TS 15293:2011 | Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods |
| DIN EN 14077:2004-03 | Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method; German version EN 14077:2003 |
| DIN EN ISO 6245:2003-01 | PETROLEUM PRODUCTS - DETERMINATION OF ASH |
| DIN EN 14214:2003-11 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14213:2003-11 | HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
| EN 15553:2007 | Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method |
| DIN EN 14517:2004-12 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-256: LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD |
| DIN EN 13723:2002-10 | PETROLEUM PRODUCTS - DETERMINATION OF LOW LEAD CONTENTS IN GASOLINES BY WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (XRF) |
| DIN EN 16896:2017-02 | PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER |
| CEN/TR 16514 : 2013 | AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL |
| CEN/TS 15940 : 2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| DIN EN 14522:2005-12 | Determination of the auto ignition temperature of gases and vapours |
| DIN EN 15199-2:2007-01 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels |
| EN 13131:2000 | Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method |
| EN 13132:2000 | Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching |
| DIN EN 14078:2004-03 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| DIN EN 14538:2006-09 | Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| UNE-EN 228:2013 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| ISO 3534:1977 | Statistics — Vocabulary and symbols |
| ISO 3165:1976 | Sampling of chemical products for industrial use — Safety in sampling |
| ISO 5168:2005 | Measurement of fluid flow — Procedures for the evaluation of uncertainties |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO 3735:1999 | Crude petroleum and fuel oils Determination of sediment Extraction method |
| ISO 3734:1997 | Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ISO/TR 9494:1997 | Petroleum liquids — Automatic pipeline sampling — Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids |
| EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.