EN ISO 898-5:2012
Current
The latest, up-to-date edition.
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
01-06-2012
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Designation system
6 Materials
7 Mechanical and physical properties
8 Applicability of test methods
9 Test methods
10 Marking
Annex A (informative) - Hydrogen embrittlement relief
after electroplating of set screws
Bibliography
ISO 898-5:2012 specifies mechanical and physical properties of set screws and similar threaded fasteners made of carbon steel or alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when set screws and similar threaded fasteners are considered all together) which conform to the requirements of ISO 898-5:2012 are evaluated at that ambient temperature range.Fasteners according to ISO 898-5:2012 are classified to specified hardness classes and are intended for use under compressive stress only.ISO 898-5:2012 is applicable to set screws and similar fasteners:made of carbon steel or alloy steel,having a triangular ISO metric screw thread according to ISO 68-1,with a coarse pitch thread M1,6 to M30, and fine pitch thread M8×1 to M30×2,with diameter/pitch combinations according to ISO 261 and ISO 262, andhaving thread tolerances according to ISO 965-1 and ISO 965-2.
| Committee |
CEN/TC 185
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| PN EN ISO 898-5 : 2012 | Identical |
| SS-EN ISO 898-5:2012 | Identical |
| ISO 898-5:2012 | Identical |
| UNE-EN ISO 898-5:2013 | Identical |
| NEN EN ISO 898-5 : 2012 | Identical |
| SN EN ISO 898-5 : 2012 | Identical |
| NS EN ISO 898-5 : 2012 | Identical |
| UNI EN ISO 898-5 : 2012 | Identical |
| NBN EN ISO 898-5 : 2012 | Identical |
| DIN EN ISO 898-5:2012-09 | Identical |
| NF EN ISO 898-5 : 2012 | Identical |
| BS EN ISO 898-5:2012 | Identical |
| I.S. EN ISO 898-5:2012 | Identical |
| 15/30326160 DC : 0 | BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS |
| 16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| I.S. EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| ISO 4029:2003 | Hexagon socket set screws with cup point |
| BS EN ISO 4029:2003 | Hexagon socket set screws with cup point |
| DIN EN ISO 4029:2004-05 | Hexagon socket set screws with cup point (ISO 4029:2003) |
| EN ISO 4029:2003 | Hexagon socket set screws with cup point (ISO 4029:2003) |
| 13/30277104 DC : 0 | BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| PREN 14389-2 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| BS EN 14389-1:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics |
| I.S. EN 14389-2:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| I.S. EN 14389-1:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| PREN 14389-1 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| 13/30277107 DC : 0 | BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| UNE-EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| BS EN ISO 3269:2001 | Fasteners. Acceptance inspection |
| BS EN 14389-2:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics |
| UNE-EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| ISO 4026:2003 | Hexagon socket set screws with flat point |
| DIN EN ISO 4026:2004-05 | Hexagon socket set screws with flat point (ISO 4026:2003) |
| EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| EN ISO 4026:2003 | Hexagon socket set screws with flat point (ISO 4026:2003) |
| PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| BS EN ISO 4026:2003 | Hexagon socket set screws with flat point |
| DIN EN ISO 2342:2004-05 | Slotted headless screws with shank (ISO 2342:2003) |
| DIN EN ISO 4028:2004-05 | Hexagon socket set screws with dog point (ISO 4028:2003) |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 16426:2002 | Fasteners — Quality assurance system |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| ISO 225:2010 | Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
| ISO 261:1998 | ISO general purpose metric screw threads General plan |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 965-3:1998 | ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.