EN ISO 9227:2017
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
Withdrawn date
31-10-2017
Published date
05-04-2017
Publisher
ISO 9227:2017 specifies the apparatus, the reagents and the procedure to be used in conducting the neutral salt spray (NSS), acetic acid salt spray (AASS) and copper-accelerated acetic acid salt spray (CASS) tests for assessment of the corrosion resistance of metallic materials, with or without permanent or temporary corrosion protection.It also describes the method employed to evaluate the corrosivity of the test cabinet environment.It does not specify the dimensions or types of test specimens, the exposure period to be used for a particular product, or the interpretation of results. Such details are provided in the appropriate product specifications.The salt spray tests are particularly useful for detecting discontinuities, such as pores and other defects, in certain metallic, organic, anodic oxide and conversion coatings.The neutral salt spray (NSS) test particularly applies to- metals and their alloys,- metallic coatings (anodic and cathodic),- conversion coatings,- anodic oxide coatings, and- organic coatings on metallic materials.The acetic acid salt spray (AASS) test is especially useful for testing decorative coatings of copper + nickel + chromium, or nickel + chromium. It has also been found suitable for testing anodic and organic coatings on aluminium.The copper-accelerated acetic acid salt spray (CASS) test is useful for testing decorative coatings of copper + nickel + chromium, or nickel + chromium. It has also been found suitable for testing anodic and organic coatings on aluminium.The salt spray methods are all suitable for checking that the quality of a metallic material, with or without corrosion protection, is maintained. They are not intended to be used for comparative testing as a means of ranking different materials relative to each other with respect to corrosion resistance or as means of predicting long-term corrosion resistance of the tested material.
| DevelopmentNote |
Supersedes EN ISO 7253. (08/2006) Supersedes PREN ISO 9227. (06/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| DS EN ISO 9227 : 2017 | Identical |
| DIN EN ISO 9227:2017-07 | Identical |
| ONORM EN ISO 9227 : 2017 | Identical |
| NBN EN ISO 9227 : 2012 | Identical |
| ISO 9227:2017 | Identical |
| NEN EN ISO 9227 : 2017 | Identical |
| PN EN ISO 9227 : 2017 | Identical |
| NS EN ISO 9227 : 2017 | Identical |
| SN EN ISO 9227 : 2017 | Identical |
| SS-EN ISO 9227:2017 | Identical |
| UNI EN ISO 9227:2017 | Identical |
| UNE-EN ISO 9227:2017 | Identical |
| NF EN ISO 9227 : 2017 | Identical |
| UNI EN ISO 9227 : 2012 | Identical |
| BS EN ISO 9227:2017 | Identical |
| DIN EN ISO 9227 E : 2017 | Identical |
| I.S. EN ISO 9227:2017 | Identical |
| DIN EN 15646 E : 2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| BS EN 62444:2013 | Cable glands for electrical installations |
| 17/30354650 DC : DRAFT SEP 2017 | BS EN 71-14 - SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| DIN EN 16207:2014-11 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
| BS EN 15288-1 : 2008 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| 08/30189622 DC : 0 | BS EN 10223-8 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 8: WELDED MESH GABION PRODUCTS |
| I.S. EN 4688:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| 17/30371343 DC : 0 | BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| 14/30301106 DC : 0 | BS EN 4575 - AEROSPACE SERIES - TRIVALENT CHROMIUM BASED CHEMICAL CONVERSION COATINGS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| DIN EN 16716:2015-08 (Draft) | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 15714-3:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 12/30254917 DC : DRAFT JAN 2012 | BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| BS EN 2535:2011 | Aerospace series. Vacuum deposition of cadmium |
| PREN 1442 : DRAFT 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| 13/30279702 DC : 0 | BS EN 331 - MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| UNI EN 15714-4 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| BS EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| 17/30371344 DC : 0 | BS EN 4689 - AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| 07/30168404 DC : DRAFT DEC 2007 | BS EN 508-1 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| PREN 62275 : DRAFT 2014 | CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS (IEC 62275:2013, MODIFIED) |
| BS EN 15220:2016 | Railway applications. Brake indicators |
| BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| 13/30290552 DC : 0 | BS EN 4691-1 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| BS EN 4704:2012 | Aerospace series. Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) |
| PREN 14353 : DRAFT 2016 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 12/30258463 DC : 0 | BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| I.S. EN 15646:2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| 08/30175210 DC : DRAFT APR 2008 | BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED AND SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| PREN 358 : DRAFT 2015 | PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS AND LANYARDS FOR WORK POSITIONING OR RESTRAINT |
| BS EN 12966:2014 | Road vertical signs. Variable message traffic signs |
| UNE-EN 15646:2010 | Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods |
| I.S. EN 61914:2016 | CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| PREN 2133 : 200P1 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| DIN EN 14353 E : 2017 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| PREN 14225-2 : DRAFT 2014 | DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 2535:2011 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| DIN EN 16927 E : 2017 | MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| PREN 4729 : DRAFT 2015 | AEROSPACE SERIES - TRIVALENT CHROMIUM BASED CHEMICAL CONVERSION COATINGS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| PREN 4689 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| PREN 3021 : DRAFT 2015 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| PREN 4827 : DRAFT 2015 | AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| DIN EN 71-14:2015-03 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| PREN 14140 : DRAFT 2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| I.S. EN 16927:2017 | MINI-POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI-POOLS |
| I.S. EN 10169:2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 4827:2017 | Aerospace series. Hexavalent chromium free anodizing of aluminium and aluminium alloys |
| BS EN 15220-1 : 2008 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| BS EN 14353 : 2007 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 4827:2017 | AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 3021:2017 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| I.S. EN 4729:2017 | AEROSPACE SERIES - TRIVALENT CHROMIUM BASED CHEMICAL CONVERSION COATINGS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 15220-1:2008 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| I.S. EN 15714-2:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| EN 14225-2:2017 | Diving suits - Part 2: Dry suits - Requirements and test methods |
| DIN EN 14428:2015-09 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| 15/30301583 DC : 0 | BS EN 16863 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE REFLECTIVE INSULATION PRODUCTS (RI) - SPECIFICATION |
| 17/30356734 DC : 0 | BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
| BS EN 14225-2:2017 | Diving suits Dry suits. Requirements and test methods |
| BS EN 71-14 : 2014 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| 14/30297831 DC : 0 | BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| NF EN 15646 : 2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| NF EN 15714-4 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| DIN EN 1670:2007-06 | Building hardware - Corrosion resistance - Requirements and test methods |
| DIN EN 13261:2011-01 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| BS EN 12966-1 : 2005 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
| BS EN 813:1997 | Personal protective equipment for prevention of falls from a height. Sit harnesses |
| BS EN 13146-6:2012 | Railway applications. Track. Test methods for fastening systems Effect of severe environmental conditions |
| BS EN 15266:2007 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| DIN EN 15266 E : 2007 | STAINLESS STEEL PLIABLE CORRUGATED TUBING KITS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR |
| BS EN 13523-8:2017 | Coil coated metals. Test methods Resistance to salt spray (fog) |
| UNE-EN 671-2:2013 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
| BS EN 341:2011 | Personal fall protection equipment. Descender devices for rescue |
| UNE-EN 505:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet |
| BS EN 354:2010 | Personal fall protection equipment. Lanyards |
| BS EN 13802:2013 | Railway applications. Suspension components. Hydraulic dampers |
| UNE-EN 331:2016 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| BS EN 13261 : 2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| UNE-EN 13146-6:2012 | Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions |
| BS EN 14566 : 2008 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS EN 62271-202:2014 | High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation |
| BS EN 1497:2007 | Personal fall protection equipment. Rescue harnesses |
| BS EN 505:2013 | Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet |
| EN 2133:2010 | Aerospace series - Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys |
| I.S. EN 10223-7:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| UNI EN 4689 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| DIN EN 14195:2015-03 | METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| EN 1096-2:2012 | Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings |
| EN 10223-8:2013 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| EN 62444 : 2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED) |
| EN 10223-7:2012 | Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing |
| DIN EN 14800:2007-06 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| EN 10223-3:2013 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| DIN EN 15496:2008-04 | Cycles - Requirements and test methods for cycle locks |
| EN 12182:2012 | Assistive products for persons with disability - General requirements and test methods |
| DIN EN 508-1:2000-12 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| EN 12487:2007/AC:2008 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
| DIN EN 1496:2017-03 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| EN 62271-202:2014/AC:2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014) |
| UNI EN 508-1 : 2014 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| EN 12966-1:2005+A1:2009 | Road vertical signs - Variable message traffic signs - Part 1: Product standard |
| EN 13146-6:2012 | Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions |
| EN 13438:2013 | Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| BS EN 16451:2015 | Railway applications. Braking. Brake pad holder |
| 09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
| 12/30271676 DC : 0 | BS EN 353-1 - REV PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
| BS EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| BS EN 61914:2016 | Cable cleats for electrical installations |
| 15/30328805 DC : 0 | BS EN 16927 - MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| 15/30324466 DC : 0 | BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 16451:2015-09 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| BS EN 10223-8:2013 | Steel wire and wire products for fencing and netting Welded mesh gabion products |
| 11/30242282 DC : 0 | BS EN 4695 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE G, H AND K |
| PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| 12/30271191 DC : 0 | BS EN 4827 - AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| 11/30242278 DC : 0 | BS EN 4693 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE A, B AND C |
| 12/30266170 DC : 0 | BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| BS EN 4689:2012 | Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish. High flexibility and chemical agent resistance for military application |
| PREN 1496 : DRAFT 2015 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| I.S. EN 62444:2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010 (MOD)) |
| 08/30189607 DC : 0 | BS EN 10223-3 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 3: HEXAGONAL STEEL WIRE NETTING FOR ENGINEERING PURPOSES |
| BS EN 15714-3:2009 | Industrial valves. Actuators Pneumatic part-turn actuators for industrial valves. Basic requirements |
| PREN 62444 : DRAFT 2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED) |
| I.S. EN 71-14:2014 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| DIN EN 15288-1:2010-12 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| 13/30275356 DC : 0 | BS EN 12966 - ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| BS EN 16927:2017 | Mini-pools. Specific requirements including safety and test methods for mini-pools |
| 11/30242281 DC : 0 | BS EN 4694 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE D, E AND F |
| BS EN 16716:2017 | Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods |
| 12/30266124 DC : 0 | BS EN 71-14 - SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| PREN 13523-8 : DRAFT 2016 | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| 14/30310323 DC : 0 | BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS |
| DIN 3387-1:2008-11 | Separable unthreaded pipe connections for metal gas pipes - Part 1: Connections for pipes with smooth ends |
| PREN 14783 : DRAFT 2012 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| DIN EN 71-14 E : 2017 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| 16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| PREN 4704 : 200P1 | AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| PREN 4856 : DRAFT 2017 | ROTORCRAFT - EMERGENCY BREATHING SYSTEMS (EBS) - REQUIREMENTS, TESTING AND MARKING |
| PREN 4691-1 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| UNI EN 15496 : 2008 | CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS |
| EN 4691-1:2017 | Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification |
| I.S. EN 16207:2014 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
| I.S. EN 4704:2012 | AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| I.S. EN 10223-8:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| I.S. EN 15288-1:2008 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| BS EN 10169 : 2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| NF EN 15807 : 2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| DIN EN 13071-1:2008-10 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| PREN 12182 : 2009-06 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| UNE-EN 15288-1:2009 | Swimming pools - Part 1: Safety requirements for design |
| CEI EN 62444 : 2014 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| PREN 17001 : DRAFT 2016 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - COATING SPECIFICATION |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| I.S. EN 62275:2015 | CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS |
| I.S. EN 14353:2017 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 1866-1:2007-10 | Mobile fire extinguishers - Part 1: Characteristics, performance and test methods |
| DIN EN 1359:2007-06 | GAS METERS - DIAPHRAGM GAS METERS |
| DIN EN 12182:2012-07 | Assistive products for persons with disability - General requirements and test methods |
| DIN EN 12487:2007-07 | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| DIN EN 1442:2008-04 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| DIN EN 15434 E : 2010 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| DIN EN 1497:2007-10 | Personal fall protection equipment - Rescue harnesses |
| DIN EN 13438:2013-12 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| DIN EN 15132 E : 2006 | CONTAINER SHELLS FOR MOBILE WASTE CONTAINERS WITH A CAPACITY UP TO 1700 L - PERFORMANCE REQUIREMENTS AND TEST METHODS |
| DIN EN 14427:2014-09 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| DIN EN 15266:2007-08 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| UNE-EN 1496:2018 | Personal fall protection equipment - Rescue lifting devices |
| DIN EN 14566:2009-10 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 505:2013-06 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| DIN EN 14236:2008-06 | ULTRASONIC DOMESTIC GAS METERS |
| BS EN 14195:2014 | Metal framing components for gypsum board systems. Definitions, requirements and test methods |
| UNE-EN 1096-2:2012 | Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings |
| BS EN 14389-1:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics |
| UNE-EN 12966-1:2006 | Road vertical signs - Variable message traffic signs - Part 1: Product standard |
| I.S. EN 813:2008 | PERSONAL FALL PROTECTION EQUIPMENT - SIT HARNESSES |
| I.S. EN 14389-2:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| I.S. EN 671-2:2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE |
| UNI EN 4688 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| I.S. EN 10223-3:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| EN 15807:2011 | Railway applications - Pneumatic half couplings |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN 508-1:2014 | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel |
| I.S. EN 341:2011 | PERSONAL FALL PROTECTION EQUIPMENT - DESCENDER DEVICES FOR RESCUE |
| I.S. EN 13523-8:2017 | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| I.S. EN 12182:2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 1096-2:2012 | GLASS IN BUILDING - COATED GLASS - PART 2: REQUIREMENTS AND TEST METHODS FOR CLASS A, B AND S COATINGS |
| I.S. EN 505:2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| I.S. EN 331:2015 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| I.S. EN 14783:2013 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| I.S. EN 2133:2010 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| EN 4689:2012 | Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application |
| DIN EN 1036-2:2008-05 | GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY - PRODUCT STANDARD |
| UNI EN 2133 : 2011 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| I.S. EN 1442:2017 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| I.S. EN 13146-6:2012 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 6: EFFECT OF SEVERE ENVIRONMENTAL CONDITIONS |
| I.S. EN 14140:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| I.S. EN 1359:2017 | GAS METERS - DIAPHRAGM GAS METERS |
| I.S. EN 1497:2007 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES |
| DIN EN 1036-1:2008-03 | Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods |
| I.S. EN 508-1:2014 | ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
| I.S. EN 13438:2013 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| I.S. EN 12487:2007 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
| I.S. EN 14195:2014 | METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 671-1:2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE |
| I.S. EN 354:2010 | PERSONAL FALL PROTECTION EQUIPMENT - LANYARDS |
| I.S. EN 1670:2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14427:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| EN 4688:2012 | Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application |
| I.S. EN 13802:2013 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| I.S. EN 14566:2008 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 1496:2017 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| I.S. EN 795:2012 | PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES |
| I.S. EN 13858:2006 | CORROSION PROTECTION OF METALS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS ON IRON OR STEEL COMPONENTS |
| I.S. EN 14389-1:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| I.S. EN 15434:2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| DIN EN 16927:2017-05 | MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| BS EN 15807:2011 | Railway applications. Pneumatic half couplings |
| 17/30364786 DC : 0 | BS EN 4827 - AEROSPACE SERIES - HEXAVALENT CHROMIUM FREE ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| BS EN 15714-4:2009 | Industrial valves. Actuators Hydraulic part-turn actuators for industrial valves. Basic requirements |
| DIN EN 10169:2012-06 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012) |
| DIN EN 13523-8:2016-07 (Draft) | COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| 16/30340560 DC : 0 | BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG) |
| 12/30264367 DC : 0 | BS EN 505 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| 16/30341197 DC : 0 | BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| UNI EN 15807 : 2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| 12/30264370 DC : 0 | BS EN 14783 - FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| BS EN 1036-1:2007 | Glass in building. Mirrors from silver-coated float glass for internal use Definitions, requirements and test methods |
| PREN 14782 : DRAFT 2015 | SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| DIN EN 1090-5 E : 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| 14/30293497 DC : 0 | BS EN 14225-2 - DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 61914:2016 | Cable cleats for electrical installations |
| DIN EN 16582-1 E : 2015 | DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS |
| 14/30214363 DC : 0 | BS EN 15220 - RAILWAY APPLICATIONS - BRAKE INDICATORS |
| 09/30201992 DC : 0 | BS EN 12182 - ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| 12/30250634 DC : 0 | BS EN 13802 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| NF EN 15714-3 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| DIN EN 15096:2008-04 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
| 12/30248681 DC : 0 | BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| BS EN 15714-2:2009 | Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements |
| 09/30207944 DC : 0 | BS EN 2133 - AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| 17/30364785 DC : 0 | BS EN 4868 - AEROSPACE SERIES - ANODIC ELECTRODEPOSITION OF PRIMER |
| UNE-EN 16129:2014 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| DIN EN 15220-1:2011-07 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| BS EN 15646:2009 | Electrodeposited coatings. Electroplated coatings of aluminium and aluminium alloys with supplementary treatment. Requirements and test methods |
| PREN 12966 : DRAFT 2013 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| UNI EN 15220-1 : 2011 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| UNI EN 15646 : 2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12966:2014 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| UNE-EN 16716:2017 | Mountaineering equipment - Avalanche Airbag systems - Safety requirements and test methods |
| UNE-EN 15220:2017 | Railway applications - Brake indicators |
| UNI EN 15714-3 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| UNE-EN 15807:2011 | Railway applications - Pneumatic half couplings |
| UNE-EN 71-14:2015 | Safety of toys - Part 14: Trampolines for domestic use |
| I.S. EN 4691-1:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| CEI EN 62275 : 2016 | CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| I.S. EN 16582-1:2015 | DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS |
| I.S. EN 14428:2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| UNI EN 15288-1 : 2010 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| I.S. EN 15220:2016 | RAILWAY APPLICATIONS - BRAKE INDICATORS |
| I.S. EN IEC 60068-2-52:2018 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION) |
| PREN 505 : DRAFT 2012 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| PREN 17125 : DRAFT 2017 | DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 13071-1:2008 | Stationary waste containers up to 5000 l, top lifted and bottom emptied General requirements |
| UNE-EN 14353:2017 | Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
| UNE-EN 14428:2016 | Shower enclosures - Functional requirements and test methods |
| UNE-EN 15220-1:2009 | Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators |
| PREN 1090-4 : DRAFT 2014 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| UNE-EN 16582-1:2015 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| BS EN 62275:2015 | Cable management systems. Cable ties for electrical installations |
| DIN EN 13146-6:2012-06 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 6: EFFECT OF SEVERE ENVIRONMENTAL CONDITIONS |
| EN 71-14 : 2014 COR 2017 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| EN 62275:2015 | Cable management systems - Cable ties for electrical installations |
| I.S. EN 15096:2008 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 1496:2015-07 (Draft) | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| DIN EN 15496 E : 2008 | CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS |
| DIN EN 1096-2:2012-04 | Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings |
| DIN EN 14800 E : 2007 | CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS |
| DIN EN 795:2012-10 | PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES |
| DIN EN 508-1:2014-08 | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel |
| DIN EN 813:2008-11 | PERSONAL FALL PROTECTION EQUIPMENT - SIT HARNESSES |
| DIN EN 15081 E : 2008 | INDUSTRIAL VALVES - MOUNTING KITS FOR PART-TURN VALVE ACTUATOR ATTACHMENT |
| DIN EN 331:2016-04 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| DIN EN 14140:2015-03 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| DIN EN 354:2010-11 | Personal fall protection equipment - Lanyards |
| DIN EN 14566 E : 2009 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 14783 E : 2013 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| DIN EN 15132:2006-12 | Container shells for mobile waste containers with a capacity up to 1700 l - Performance requirements and test methods |
| BS EN 4826:2014 | Aerospace series. Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners |
| BS EN 795:2012 | Personal fall protection equipment. Anchor devices |
| UNE-EN 671-1:2013 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
| UNE-EN 10223-3:2014 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| EN 15096:2008 | Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification |
| UNI EN 13261 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| UNE-EN 62275:2016 | Cable management systems - Cable ties for electrical installations |
| EN 13261:2009+A1:2010 | Railway applications - Wheelsets and bogies - Axles - Product requirements |
| UNE-EN 16207:2015 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| EN 15288-1:2008+A1:2010 | Swimming pools - Part 1: Safety requirements for design |
| DIN EN 14427 E : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| EN 1866-1:2007 | Mobile fire extinguishers - Part 1: Characteristics, performance and test methods |
| EN 813:2008 | Personal fall protection equipment - Sit harnesses |
| UNI EN 12487 : 2007 | CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS |
| UNI EN 15434 : 2010 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| UNI EN 10223-8 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| UNI EN 14783 : 2013 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| UNI EN 505 : 2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| UNI EN 813 : 2008 | PERSONAL FALL PROTECTION EQUIPMENT - SIT HARNESSES |
| UNI EN 671-1 : 2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE |
| UNI EN 14427 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| UNI EN 13802 : 2014 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| UNI EN 10223-7 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| UNI EN 10245-1 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| UNI EN 341 : 2011 | PERSONAL FALL PROTECTION EQUIPMENT - DESCENDER DEVICES FOR RESCUE |
| UNI EN 15069 : 2009 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| UNI EN 14566 : 2009 | MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 1497 : 2008 | PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES |
| UNI EN 14800 : 2007 | CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION DOMESTIC APPLIANCES USING GASEOUS FUELS |
| UNI EN 13146-6 : 2012 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 6: EFFECT OF SEVERE ENVIRONMENTAL CONDITIONS |
| UNI EN 13438 : 2013 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| UNI EN 354 : 2010 | PERSONAL FALL PROTECTION EQUIPMENT - LANYARDS |
| UNI EN 671-2 : 2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE |
| UNI EN 1096-2 : 2012 | GLASS IN BUILDING - COATED GLASS - PART 2: REQUIREMENTS AND TEST METHODS FOR CLASS A, B AND S COATINGS |
| UNI EN 14140 : 2015 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| UNI EN 12182 : 2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| UNI EN 1670 : 2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| UNI EN 10223-3 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| I.S. EN 15807:2011 | RAILWAY APPLICATIONS - PNEUMATIC HALF COUPLINGS |
| UNI EN 16129 : 2013 | PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| DIN EN 15096 E : 2008 | DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - HOSE UNION ANTI-VACUUM VALVES - DN 15 TO DN 25 INCLUSIVE FAMILY H, TYPE B AND TYPE D - GENERAL TECHNICAL SPECIFICATION |
| 16/30352446 DC : 0 | BS EN 3833 - AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| PREN 13802 : DRAFT 2012 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| 11/30244798 DC : 0 | BS EN 1096-2 - GLASS IN BUILDING - COATED GLASS - PART 2: REQUIREMENTS AND TEST METHODS FOR CLASS A, B AND S COATINGS |
| PREN 14236 : DRAFT 2017 | ULTRASONIC DOMESTIC GAS METERS |
| DIN EN 14353:2016-02 (Draft) | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN 15714-2:2009 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| BS EN 4729:2017 | Aerospace series. Trivalent chromium based chemical conversion coatings for aluminium and aluminium alloys |
| 14/30288142 DC : 0 | BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| PREN 10223-3 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR ENGINEERING PURPOSES |
| 16/30339916 DC : 0 | BS EN 2133 - AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| 13/30281710 DC : 0 | BS EN 62444 - CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| UNI EN 15714-2 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 08/30189619 DC : 0 | BS EN 10223-7 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| 12/30256073 DC | BS EN 12899-3 AMD1. Fixed, vertical road traffic signs. Part 3. Delineator posts and retroreflectors |
| BS EN 16582-1:2015 | Domestic swimming pools General requirements including safety and test methods |
| EN IEC 60068-2-52:2018 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
| BS EN 16207:2014 | Railway applications. Braking. Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| PREN 13565-1 : DRAFT 2016 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS |
| UNE-EN 15714-4:2010 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| CEI UNI EN 12966-1 : 2010 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: - PRODUCT STANDARD |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| PREN 14566 : DRAFT 2014 | MECHANICAL FASTENERS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TESTS METHODS |
| 17/30366369 DC : 0 | BS EN 2133 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| 07/30172345 DC : 0 | BS EN 15724 - THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - SECONDARY CONTAINMENTS USED WITH TANKS COMPLYING WITH EN 13341 - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| BS EN 15534-1 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| I.S. EN 4689:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| NF EN 15220-1 : 2009 + A1 2011 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| DIN EN 10223-8:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| DIN EN 15714-4:2010-02 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| PREN 4688 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| PREN 3833 : 200P3 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| UNI CEI EN 12966-1 : 2010 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
| I.S. EN 1036-1:2007 | GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 1: DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 15/30326160 DC : 0 | BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS |
| PREN 331 : DRAFT 2013 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| 17/30360253 DC : 0 | BS EN 15288-1 - SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| PREN 353-1 : DRAFT 2012 | PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
| 16/30337101 DC : 0 | BS EN 16436-2 - RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 2: ASSEMBLIES |
| DIN EN 14236 E : 2008 | ULTRASONIC DOMESTIC GAS METERS |
| 15/30327732 DC : 0 | BS EN 16856 - PORTABLE AEROSOL DISPENSER FOR FIRE EXTINGUISHING PURPOSES |
| 17/30354229 DC : 0 | BS EN 17109 - ROPES COURSES - INDIVIDUAL SAFETY SYSTEM - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 12966:2015-03 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
| DIN EN 14428 E : 2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| ONORM EN 14236 : 2008 | ULTRASONIC DOMESTIC GAS METERS |
| PREN 17109 : DRAFT 2017 | ROPES COURSES - INDIVIDUAL SAFETY SYSTEM - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 353-1 : 2014 | PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
| EN 4710-01:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification |
| EN 353-1:2014+A1:2017 | Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line |
| NF EN 13261 : 2009 + A1 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| I.S. EN 14225-2:2017 | DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| DIN EN 15069 E : 2010 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| DIN EN 341:2011-09 | Personal fall protection equipment - Descender devices for rescue |
| DIN EN 13802:2014-03 | Railway applications - Suspension components - Hydraulic dampers |
| DIN EN 10223-3:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| DIN EN 10223-7:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| BS EN 1496:2017 | Personal fall protection equipment. Rescue lifting devices |
| UNE-EN 14140:2015 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction |
| 11/30242263 DC : 0 | BS EN 4691-001 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - TECHNICAL SPECIFICATION |
| BS EN 12487:2007 | Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| BS EN 508-1:2014 | Roofing and cladding products from metal sheet. Specification for self-supporting of steel, aluminium or stainless steel sheet Steel |
| UNE-EN 10223-8:2014 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| BS EN 13858:2006 | Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components |
| BS EN 15496:2008 | Cycles. Requirements and test methods for cycle locks |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| BS EN 10223-7:2012 | Steel wire and wire products for fencing and netting Steel wire welded panels for fencing |
| BS EN 14389-2:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics |
| BS EN 671-2:2001 | Fixed fire fighting systems. Hose systems Hose systems with lay-flat hose |
| BS EN 14140:2014 | LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction |
| BS EN 15434 : 2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| UNE-EN 10223-7:2013 | Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing |
| UNE-EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| BS EN 14427:2014 | LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction |
| UNE-EN 13802:2014 | Railway applications - Suspension components - Hydraulic dampers |
| BS EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| UNE-EN 14195:2015 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
| UNE-EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| DIN EN 15434:2010-07 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010) |
| BS EN 14783:2013 | Fully supported metal sheet and strip for roofing, external cladding and internal lining. Product specification and requirements |
| DIN EN 15069:2010-07 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| DIN EN 14783:2013-07 | FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| UNE-EN 1442:2017 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
| BS EN 1866-1:2007 | Mobile fire extinguishers Characteristics, performance and test methods |
| BS EN 671-1:2012 | Fixed firefighting systems. Hose systems Hose reels with semi-rigid hose |
| BS EN 13438:2013 | Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| BS EN 1670:2007 | Building hardware. Corrosion resistance. Requirements and test methods |
| BS EN 1442 : 2006 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| UNE-EN 10169:2011 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| BS EN 1096-2:2012 | Glass in building. Coated glass Requirements and test methods for class A, B and S coatings |
| BS EN 2133:2010 | Aerospace series. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys |
| BS EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| BS EN 4691-1:2017 | Aerospace series. Tie rod with integrated bolts Technical specification |
| BS EN 12182:2012 | Assistive products for persons with disability. General requirements and test methods |
| UNE-EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN 1442:2017 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
| EN 1670:2007/AC:2008 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| EN 4827:2017 | Aerospace series - Hexavalent chromium free anodizing of aluminium and aluminium alloys |
| EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| EN 15220:2016 (edition 2) | Railway applications - Brake indicators |
| EN 1497:2007 | Personal fall protection equipment - Rescue harnesses |
| EN 16207:2014 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| EN 15266:2007 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| EN 15081:2007 | Industrial valves - Mounting kits for part-turn valve actuator attachment |
| EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| EN 15132:2006 | Container shells for mobile waste containers with a capacity up to 1 700 l - Performance requirements and test methods |
| EN 13858:2006 | Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components |
| EN 15434:2006+A1:2010 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| EN 16451:2015 | Railway applications - Braking - Brake pad holder |
| EN 16716:2017 | Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods |
| EN 15220-1:2008+A1:2011 | RAILWAY APPLICATIONS - BRAKE INDICATORS - PART 1: PNEUMATICALLY OPERATED BRAKE INDICATORS |
| EN 15714-3:2009 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| EN 505:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet |
| EN 15496:2008 | Cycles - Requirements and test methods for cycle locks |
| EN 1359:2017 | Gas meters - Diaphragm gas meters |
| EN 4704:2012 | Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA) |
| EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| EN 15646:2009 | Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods |
| EN 15714-4:2009 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| EN 14140:2014/AC:2015 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| EN 14566:2008+A1:2009 | Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods |
| EN 14353:2017 | Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
| EN 2535:2011 | Aerospace series - Vacuum deposition of cadmium |
| EN 14195:2014 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
| EN 671-2:2012 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
| EN 4729:2017 | Aerospace series - Trivalent chromium based chemical conversion coatings for aluminium and aluminium alloys |
| EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| EN 16927:2017 | Mini-pools - Specific requirements including safety and test methods for mini-pools |
| EN 354:2010 | Personal fall protection equipment - Lanyards |
| EN 13802:2013 | Railway applications - Suspension components - Hydraulic dampers |
| EN 4826:2014 | Aerospace series - Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength ≤ 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners |
| EN 14783:2013 | Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements |
| EN 795:2012 | Personal fall protection equipment - Anchor devices |
| EN 341:2011 | Personal fall protection equipment - Descender devices for rescue |
| EN 671-1:2012 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
| EN 3021:2017 | Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification |
| EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| EN 1496:2017 | Personal fall protection equipment - Rescue lifting devices |
| 15/30329088 DC : 0 | BS EN 358 - PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS AND LANYARDS FOR WORK POSITIONING OR RESTRAINT |
| UNI EN 16207 : 2014 | RAILWAY APPLICATIONS - BRAKING - FUNCTIONAL AND PERFORMANCE CRITERIA OF MAGNETIC TRACK BRAKE SYSTEMS FOR USE IN RAILWAY ROLLING STOCK |
| DIN EN 16716 E : 2017 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 15714-3:2010-02 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| I.S. EN 1866-1:2007 | MOBILE FIRE EXTINGUISHERS - PART 1: CHARACTERISTICS, PERFORMANCE AND TEST METHODS |
| UNE-EN 15714-3:2010 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| UNI EN 2535 : 2012 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| 16/30332914 DC : 0 | BS EN 14353 - METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 17/30358108 DC : 0 | BS EN 17125 - DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS |
| 11/30247470 DC : DRAFT MAY 2011 | BS EN 4710-001 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - TECHNICAL SPECIFICATION |
| 09/30202313 DC : 0 | BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
| DIN EN 16129:2013-08 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| 08/30188146 DC : 0 | BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 15714-4:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 11/30229997 DC : 0 | BS EN 14427 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| 15/30323348 DC : 0 | BS EN 1496 - PERSONAL FALL PROTECTION EQUIPMENT - RESCUE LIFTING DEVICES |
| EN 16582-1:2015 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| DIN EN 15807:2011-05 | Railway applications - Pneumatic half couplings |
| DIN EN 16451 E : 2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| 14/30300966 DC : 0 | BS EN 1442 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| BS EN 4710-01:2015 | Aerospace series. Quick release fastening systems for non-structural applications Technical specification |
| BS EN 3021:2017 | Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification |
| 10/30215608 DC : 0 | BS EN 4704 - AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODISING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| I.S. EN 15496:2008 | CYCLES - REQUIREMENTS AND TEST METHODS FOR CYCLE LOCKS |
| 14/30259002 DC : 0 | BS ISO 17745 - STEEL WIRE RING MESH PANELS - DEFINITIONS AND SPECIFICATIONS |
| BS EN 4688:2012 | Aerospace series. Paints and varnishes. Corrosion inhibiting two components cold curing primer for military application |
| BS EN 15096:2008 | Devices to prevent pollution by backflow of potable water. Hose Union anti-vacuum valves. DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification |
| PREN 1096-2 : DRAFT 2011 | GLASS IN BUILDING - COATED GLASS - PART 2: REQUIREMENTS AND TEST METHODS FOR CLASS A, B AND S COATINGS |
| PREN 4868 : DRAFT 2018 | AEROSPACE SERIES - ANODIC ELECTRODEPOSITION OF HEXAVALENT CHROMIUM FREE PRIMER |
| UNE-EN 15714-2:2010 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| PREN 71-14 : DRAFT 2017 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| DIN EN 15714-2:2010-02 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| DIN EN 16582-1:2015-11 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| UNE-EN 15266:2008 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| I.S. EN 16716:2017 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 16451:2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| I.S. EN 16129:2013 | PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| I.S. EN 15534-1:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| EN 14428:2015 | Shower enclosures - Functional requirements and test methods |
| I.S. EN 13071-1:2008 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 4826:2014 | AEROSPACE SERIES - ZINC-NICKEL (12%-16% NI) PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER ALLOYS, NICKEL ALLOYS AND ALUMINIUM ALLOYS FOR PARTS AND FASTENERS |
| I.S. EN 4710-01:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 01: TECHNICAL SPECIFICATION |
| PREN 16856 : DRAFT 2015 | PORTABLE AEROSOL DISPENSER FOR FIRE EXTINGUISHING PURPOSES |
| UNI EN 13071-1 : 2008 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| UNI EN 4704 : 2013 | AEROSPACE SERIES - TARTARIC-SULPHURIC-ACID ANODIZING OF ALUMINIUM AND ALUMINIUM WROUGHT ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT (TSA) |
| UNI EN 10169 : 2012 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 16927:2017 | Mini-pools - Specific requirements including safety and test methods for mini-pools |
| I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| NFD 12 203 : 2012 | SANITARY APPLIANCES - EQUIPPED FLUSHING CISTERNS FOR TOILET BOWL |
| 16/30339220 DC : 0 | BS EN 17001 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - COATING SPECIFICATION |
| NF EN 2535 : 2012 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| BS EN 14428 : 2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| UNE-EN 12966:2015 | Road vertical signs - Variable message traffic signs |
| DIN EN 16927:2015-10 (Draft) | MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS |
| I.S. EN 353-1:2014 | PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE |
| 12/30263299 DC : 0 | BS EN 4826 - AEROSPACE SERIES - ZINC-NICKEL (12/16% NI) PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS AND ALUMINIUM ALLOYS FOR PARTS AND FASTENERS |
| UNE-EN 508-1:2014 | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel |
| BS EN 10223-3:2013 | Steel wire and wire products for fencing and netting Hexagonal steel wire mesh products for civil engineering purposes |
| BS EN 1359:2017 | Gas meters. Diaphragm gas meters |
| BS EN 1036-2:2008 | Glass in building. Mirrors from silver-coated float glass for internal use Evaluation of conformity; product standard |
| BS EN 15081:2007 | Industrial valves. Mounting kits for part-turn valve actuator attachment |
| BS EN 15132:2006 | Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods |
| DIN EN 16716:2017-05 | MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 71-14:2017-11 | SAFETY OF TOYS - PART 14: TRAMPOLINES FOR DOMESTIC USE |
| EN 13071-1:2008/AC:2010 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| EN 12966:2014 | Road vertical signs - Variable message traffic signs |
| EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| EN 1036-2:2008 | Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard |
| EN 61914:2016 | Cable cleats for electrical installations |
| EN 1036-1:2007 | Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods |
| DIN EN 671-2:2012-07 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
| DIN EN 671-1:2012-07 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
| DIN EN 14140:2017-01 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| DIN EN 15081:2008-03 | Industrial valves - Mounting kits for part-turn valve actuator attachment |
| DIN EN 12966-1:2010-03 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
| DIN EN 14353:2017-09 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 15646:2009-07 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| DIN EN 13858:2007-02 | Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components |
| UNE-EN 15434:2007 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| PREN 4826 : DRAFT 2013 | AEROSPACE SERIES - ZINC-NICKEL (12-16% NI) PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER ALLOYS, NICKEL ALLOYS AND ALUMINIUM ALLOYS FOR PARTS AND FASTENERS |
| PREN 6095 : 200P1 | AEROSPACE SERIES - ROTARY FASTENERS - STRUCTURAL AND NON-STRUCTURAL APPLICATIONS - TECHNICAL SPECIFICATION |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 7599:2010 | Anodizing of aluminium and its alloys General specifications for anodic oxidation coatings on aluminium |
| ISO 8993:2010 | Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Chart method |
| ISO 4623-2:2016 | Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates |
| ISO 8994:2011 | Anodizing of aluminium and its alloys Rating system for the evaluation of pitting corrosion Grid method |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 3574:2012 | Cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 4628-8:2012 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
| ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| ISO 4628-3:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting |
| ISO 17872:2007 | Paints and varnishes Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
| ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
| ISO 4628-1:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| ISO 4527:2003 | Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods |
| ISO 4520:1981 | Chromate conversion coatings on electroplated zinc and cadmium coatings |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 8407:2009 | Corrosion of metals and alloys Removal of corrosion products from corrosion test specimens |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| ISO 10289:1999 | Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured articles subjected to corrosion tests |
| ISO 3613:2010 | Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.