Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN ISO 9606-3 : 1999

Current
Current

The latest, up-to-date edition.

Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)
Published date

01-04-1999

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Symbols and abbreviations
    4.1 General
    4.2 Test piece
    4.3 Consumables
    4.4 Miscellaneous
5 Essential variables for approval testing
    5.1 General
    5.2 Welding processes
    5.3 Joint types (butt and fillet welds)
    5.4 Material groups
    5.5 Consumables
    5.6 Dimensions
    5.7 Number of test pieces
    5.8 Welding positions
6 Range of approval for the welder
    6.1 General
    6.2 Welding process
    6.3 Joint types
    6.4 Material groups
    6.5 Consumables
    6.6 Dimensions
    6.7 Welding positions
7 Examination and testing
    7.1 Supervision
    7.2 Shapes and dimensions of test pieces
    7.3 Welding conditions
    7.4 Test methods
    7.5 Test piece and test specimens
8 Acceptance requirements for test pieces
9 Re-tests
10 Period of validity
    10.1 Initial approval
    10.2 Prolongation
11 Certificate
12 Designation
Annex A (informative) Job knowledge
Annex ZA (informative) Bibliography
Annex ZB (informative) Clauses of this European Standard
addressing essential requirements or other provisions of
EU Directives

This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of copper.

Committee
CEN/TC 121
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

12/30257298 DC : 0 BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
09/30202307 DC : 0 BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
EN 12972:2015 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
16/30334287 DC : 0 BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
DIN EN 334:2016-05 (Draft) GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN ISO 15607:2004 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES
I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 676:2003+A2:2008/AC:2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 12972:2015-04 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
DIN EN 14382 E : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 1011-1:2009 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
I.S. EN 15085-4:2007 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 4: PRODUCTION REQUIREMENTS
DIN EN ISO 15612:2016-09 (Draft) SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE
I.S. EN 334:2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
ONORM EN 334 : JUN 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 12972:2015 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
I.S. EN 16668:2016 INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
BS EN ISO 15612:2004 Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
DIN EN 15085-4:2008-01 Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
DIN EN 1011-1:2009-07 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
DIN EN 267:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 267:2011-11 Automatic forced draught burners for liquid fuels
BS EN 334 : 2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN 1011-1:2009 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
07/30158903 DC : 0 BS EN 1011-1 - WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
12/30258099 DC BS EN 267. Forced draught burners for liquid fuels
UNE-EN 12972:2015 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
I.S. EN ISO 15612:2004 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE
ISO 15612:2004 Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN 267 : 2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 676:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 14382:2016-05 (Draft) SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 12972:2015 Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks
DIN EN 676:2008-11 Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008)
UNI EN 267 : 2011 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
ONORM EN 676 : 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
EN 15085-4:2007 Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
UNI EN 14382 : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
UNI EN 1011-1 : 2009 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
UNI EN 676 : 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
PREN 12972 : DRAFT 2017 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
PREN 676 : DRAFT 2012 FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
03/115441 DC : DRAFT OCT 2003 BS EN ISO 15614-6 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - ARC WELDING OF COPPER AND ITS ALLOYS
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNI EN ISO 15612 : 2006 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE
17/30360691 DC : 0 BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN ISO 15612:2004 Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
I.S. EN 267:2009 AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
BS EN 15085-4:2007 Railway applications. Welding of railway vehicles and components Production requirements
BS EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials. General rules
BS EN 1011-1:2009 Welding. Recommendations for welding of metallic materials General guidance for arc welding
BS EN 676 : 2003 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
EN 16668:2016+A1:2018 Industrial valves - Requirements and testing for metallic valves as pressure accessories
EN 14382:2005+A1:2009/AC:2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar
PREN ISO 15614-6 : DRAFT 2003 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 6: ARC WELDING OF COPPER AND ITS ALLOYS
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
12/30259217 DC : 0 BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
UNI EN 334 : 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
I.S. EN 676:2003 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN ISO 15607:2004-03 SPECIFICATION AND QUALIFICATION OF WELDING - PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES

CR 12187 : 1995 WELDING - GUIDELINES FOR A GROUPING SYSTEM OF MATERIALS FOR WELDING PURPOSES
EN 30042 : 1994 ARC WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS
EN 1321:1996 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
EN ISO 6947:2011 Welding and allied processes - Welding positions (ISO 6947:2011)
EN 895:1995 Destructive tests on welds in metallic materials - Transverse tensile test
EN 910 : 1996 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS
EN 288-2:1992/A1:1997 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING
ISO 857:1990 Welding, brazing and soldering processes — Vocabulary
EN 287-2:1992/A1:1997 APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS
EN 1289:1998/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING OF WELDS - ACCEPTANCE LEVELS
EN 24063 : 1992 WELDING, BRAZING, SOLDERING AND BRAZE WELDING OF METALS - NOMENCLATURE OF PROCESSES AND REFERENCE NUMBERS FOR SYMBOLIC REPRESENTATION ON DRAWINGS
EN 571-1:1997 Non destructive testing - Penetrant testing - Part 1: General principles
EN 970:1997 Non-destructive examination of fusion welds - Visual examination
EN 26520 : 1991 CLASSIFICATION OF IMPERFECTIONS IN METALLIC FUSION WELDS, WITH EXPLANATIONS
EN 1435:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS
EN 1320:1996 Destructive tests on welds in metallic materials - Fracture test
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more