FED-STD-H28 Revision A:1994
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Screw-Thread Standards for Federal Services
Available format(s)
PDF
Superseded date
23-04-2021
Published date
28-12-1994
Publisher
Basic dimensional requirements for assembly, interchangeability, tensile, shear and fatigue strength and installation and removal torque of threaded parts.
This standard includes the basic screw thread dimensional and acceptability requirements for common screw thread forms and applications. Design and use information are also provided when necessary. Specific requirements for particular screw threads, gages, etc., are covered by detailed standard sections.
| DevelopmentNote |
A Notice 1 - Notice of Validation (09/2001)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| MIL-L-81745 Revision B:1985 | LAUNCHER CONTAINER, (A) SIZE SONOBUOY LAU-126/A |
| SAE AS 85188 : 2013 | RIVETER, POWER, PNEUMATIC-HYDRAULIC BLIND RIVET INSTALLATION |
| MIL-S-52256 Revision C:1990 | SURVEYING INSTRUMENT; AZIMUTH GYRO, LIGHTWEIGHT |
| MIL-DTL-642-11 Revision C:2013 | PLUGS, TELEPHONE (TYPE PJ-636) |
| MIL-P-80249 Revision A:1982 | PLATING UNIT, SELECTIVE (BRUSH) PORTABLE |
| MIL-DTL-83413-5 Revision C:2013 | CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: RECEPTACLES, ONE PIECE |
| MIL-P-0081653 Revision C:1987 | POWER CONTROLLER, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL-DTL-11732 Revision F:2010 | CYLINDER, COMPRESSED GAS: CHLORINE; DOT 3A480 OR DOT 3AA480, GENERAL SPECIFICATION FOR |
| MS24699 Revision B:2005 | Shaft, Connector, Rack and Panel, Miniature |
| WW-C-624 Revision E:1983 | COUPLING ASSEMBLY, HOSE (GARDEN, WATER, AND WATER SUCTION) |
| MIL-DTL-28788 Revision C:2010 | SWITCHES, AIR AND LIQUID FLOW, SENSING, GENERAL SPECIFICATION FOR |
| MIL V 1189 : D | VALVE, GATE, BRONZE, FLANGED ENDS, WORKING PRESSURES UP TO 400 PS [SHIPBOARD USE] |
| MIL A 18455 : C | ARGON, TECHNICAL |
| MIL-C-52972 Revision A:1987 | COMPRESSOR UNIT, 5 CFM, 3200 PSI, DIESEL ENGINE DRIVEN, DIVING AIR |
| MIL-R-83372 Base Document:1972 | RELAY, ELECTROMAGNETIC, HYBRID, EMI SUPPRESSED, GENERAL SPECIFICATION FOR |
| MIL-I-62676 Base Document:1992 | INDICATORS AND TRANSMITTERS: LIQUID, TEMPERATURE AND PRESSURE (METRIC) |
| MIL-DTL-52404 Revision C:2010 | CONNECTIONS: HOSE, FIRE AND WATER |
| MS39210 Revision K:2018 | NUTS, TUBE COUPLING - SAFETY SLEEVE COMPRESSION TYPE |
| MIL-C-1173 Revision E:1976 | CART, GENERAL HAULING |
| MIL-P-24608 Revision A:1987 | PIPE, FITTINGS, AND ADHESIVE KITS, GLASS-REINFORCED THERMOSETTING EPOXY RESIN FOR SHIPBOARD PIPING SYSTEMS |
| MIL-B-14154 Revision E:1992 | BORING MACHINE, CAM AND MAIN BEARINGS, PORTABLE |
| MIL-B-12582 Revision C:1984 | BLOCK, TACKLE, HAUL BACK, FOR WIRE ROPE |
| MIL-L-80277 Base Document:1989 | LATHES, PRECISION, TOOLROOM, VARIABLE SPEED, 11-INCH THROUGH 13-INCH |
| MIL C 39010 : D | COIL, FIXED, RADIOFREQUENCY, MOLDED, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| TIA 5150000 : 1986(R2002) | GENERIC SPECIFICATION FOR OPTICAL FIBER AND CABLE SPLICES |
| MIL C 27599 : B | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENTAL RESISTANT, SOLDER CONTACTS GENERAL SPECIFICATION FOR |
| GG-G-91 Revision D:1972 | GAGE, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE |
| MIL-E-16400 Revision H:1987 | ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR |
| MIL-J-26149 Revision E:1988 | Jack, Hydraulic, Aircraft Maintenance, General Specification for |
| GGG-W-290 Revision C:1985 | WHEELS, ABRASIVE, SNAGGING |
| DOD STD 2003/2 : 0 | ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIP AND SUBMARINES (EQUIPMENT) |
| MIL-STD-1580 Revision B:2003 | DESTRUCTIVE PHYSICAL ANALYSIS FOR ELECTRONIC, ELECTROMAGNETIC, AND ELECTROMECHANICAL PARTS |
| MIL-V-24384 Revision B:1988 | Valve, Pressure Regulating, for Low Pressure Air or Nitrogen Systems |
| MIL C 83513 : C | CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
| MS39206 Revision G:2012 | ADAPTERS, STRAIGHT, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, MALE PIPE END |
| 13/30285935 DC : 0 | BS EN 3545-006 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 006: MALE CODING AND ATTACHMENT SYSTEM FOR MOUNTING ON FIXED HOUSING (RECEPTACLE) - PRODUCT STANDARD |
| MIL-DTL-55235 Revision A:2003 | CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES TPS, GENERAL SPECIFICATION |
| MIL-DTL-23971 Revision E:2017 | POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| MIL-T-14132 Revision G:1991 | THEODOLITE, SURVEYING, DIRECTION, SECOND ORDER |
| GGG-V-790 Revision E:1992 | VULCANIZERS, HOT PATCH AND PLATE; INNER TUBE |
| MIL-G-17713 Revision D:1988 | GAGES, LIQUID LEVEL MEASURING, TANK |
| MIL-PRF-19207 Revision G:2013 | Fuseholders, Extractor Post Type, Blown Fuse, Indicating and Nonindicating, General Specification for |
| MIL-DTL-45916 Revision C:2014 | INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
| MIL-L-53106 Base Document:1990 | LAUNCHER, BRIDGE, LIGHT ASSAULT TOWED |
| MIL-DTL-13623 Revision E:2010 | SWITCH, ROTARY: 28 VOLT DC |
| A-A-55603 Revision A:2012 | Clamp, Guy (Pole Line) |
| GGG-S-282 Revision E:1983 | SHEARS, METAL CUTTING, ELECTRIC (PORTABLE) |
| MIL-T-17585 Revision C:1983 | THERMOMETER, RECORDING, CAPILLARY TUBE AND BULB, AND RESISTANCE |
| BB-N-411 Revision C:1973 | NITROGEN, TECHNICAL |
| MIL-R-52939 Base Document:1977 | REGULATOR, CURRENT, RUNWAY LIGHTING, 120 VOLT, 2 1/4 KW, AC |
| MIL R 23285 : B | RESISTOR, VARIABLE, NONWIRE WOUND GENERAL SPECIFICATION FOR |
| MIL-DTL-3655 Revision D:2004 | Connector, Plug and Receptacle, Electrical (Coaxial, Series Twin), and Associated Fittings, General Specification for |
| MIL A 23798 : C | AIR CONDITIONER, FAN-COIL ASSEMBLY |
| MIL-V-82466 Base Document:1967 | VACUUM-AIR-NITROGEN DISTRIBUTION SYSTEM |
| MIL-I-17244 Revision E:1971 | INDICATOR, TEMPERATURE, DIRECT-READING, BIMETALLIC, (3 AND 5 INCH DIAL) |
| MS39199 Revision G:2012 | NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE, BULKHEAD MOUNTING |
| MIL-C-83515 Revision A:1985 | CONNECTOR, TELECOMMUNICATION, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
| MIL D 9129 : D | DISCHARGERS, ELECTROSTATIC - GENERAL SPECIFICATION FOR |
| MIL-H-53096 Base Document:1990 | HOSES & HOSE ASSEMBLIES, ELASTOMER, RUBBER, LIQUID FUEL, NON-COLLAPSIBLE, LOW TEMPERATURE |
| MIL-M-80141 Revision C:1987 | METALLIZING OUTFITS, POWDER-GUNS AND ACCESSORIES |
| MIL-H-21367 Revision E:1985 | HULL FITTINGS: CONNECTORS, ADAPTER, END SEALS, AND STUFFING TUBES FOR FLEXIBLE, SOLID-DIELECTRIC, RADIO-FREQUENCY CABLES |
| MIL-C-12889 Revision A:1957 | CAPACITORS, BY-PASS, RADIO-INTERFERENCE REDUCTION, PAPER DIELECTRIC, AC AND DC, (HERMETICALLY SEALED IN METALLIC CASES) GENERAL SPECIFICATION FOR |
| MIL M 28837 : 0 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL-DTL-3922 Revision E:2016 | FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR |
| GGG-J-1564 Revision C:1992 | JACKS, DOLLY TYPE, HYDRAULIC, AUTOMOTIVE |
| MIL C 3655 : C | CONNECTOR, PLUG AND RECEPTACLE, ELECTRICAL [COAXIAL SERIES TWIN] AND ASSOCIATED FITTINGS, GENERAL SPECIFICATION FOR |
| MIL-C-52980 Revision B:1988 | COMPRESSOR, RECIPROCATING AND ROTARY, GASOLINE ENGINE DRIVEN, AIR |
| MIL S 15743 : C | SWITCH, ROTARY, ENCLOSED |
| MIL-T-24270 Revision B:1983 | THERMOWELLS FOR THERMOMETERS AND ELECTRICAL TEMPERATURE SENSORS GENERAL SPECIFICATION FOR |
| MIL-DTL-32546 Base Document:2016 | Connectors, Electrical, Circular, for High-Speed Data Bus Transmission, Copper Conductor, General Specification for |
| MIL-C-555 Revision L:1991 | COMPRESSOR, AIR RECIPROCATING AND ROTARY, DIESEL ENGINE DRIVEN |
| MIL-PRF-83383 Revision F:2017 | Circuit Breakers, Remote Control, Thermal, Trip Free General Specification For |
| A-A-55469 Revision B:2015 | CONNECTORS, ELECTRICAL, PLUGS, TIP (TEST POINT PLUG, BANANA PLUG) GENERAL REQUIREMENTS FOR |
| SAE AS 5590 : 2013 | CONNECTORS, FIBER OPTIC, ADVANCED, CIRCULAR OR RECTANGULAR, PLUG AND RECEPTACLE, ENVIRONMENT RESISTANT, REMOVABLE TERMINI/CONTACTS, GENERAL SPECIFICATION FOR |
| MIL H 52471 : D | HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR |
| XP PREN 3660-001 : 1994 XP | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION |
| GG-R-550 Revision B:1981 | ROD, STADIA, FOLDING, WITH CASE |
| MIL-DTL-17060 Revision G:2009 | MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE |
| MIL-B-28873 Base Document:1983 | BLOWERS, ELECTRONICALLY COMMUTATED BRUSHLESS, DIRECT CURRENT, (ECDC) MOTOR DRIVEN, FOR COOLING ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
| XP PREN 3660-005 : 1994 XP | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 005: CABLE OUTLET, TYPE A, 005, 90 DEGREE, UNSEALED, WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD |
| MIL-B-28617 Revision C:1977 | BOOMS, FLOATING BARRIER, OIL (FOR HARBOR USE) |
| MIL-N-25027-1 Revision A:1995 | NUT, SELF-LOCKING, HEAVY HEX, (NON-METALLIC INSERT) 250 & 450 DEG F, UNJC-3B, 1/4 THROUGH 2-1/2 INCH NOMINAL DIAMETERS, NICKEL-COPPER ALLOY |
| MIL-PRF-24236 Revision D:2006 | SWITCHES, THERMOSTATIC, (METALLIC AND BIMETALLIC), GENERAL SPECIFICATION FOR |
| XP PREN 3660-004 : 1994 XP | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 004: CABLE OUTLET, TYPE A, 004, STRAIGHT, UNSEALED, WITH CLAMP STRAIN RELIEF - PRODUCT STANDARD |
| MS17185 Revision A:2006 | CLAMP (SYNCHRO) |
| MIL C 28840 : A | CONNECTOR ELECTRICAL, CIRCULAR THREADED, HIGH DENSITY, HIGH SHOCK SHIPBOARD, CLASS D - GENERAL SPECIFICATION FOR |
| MIL-DTL-22438 Revision C:2012 | PANELS, RECEPTACLE, FOR ELECTRICAL AND ELECTRONICS TEST AND MAINTENANCE TABLE, GENERAL SPECIFICATION FOR |
| MIL-PRF-39012-5 Revision H:2006 | CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES N (CABLED), RIGHT ANGLE, PIN CONTACT, CLASS 2) |
| MIL S 19500/308 : B | SEMICONDUCTOR DEVICE, DIODE, SILICON POWER RECTIFIER, FAST RECOVERY TX AND NON TX TYPES 1N3909, 1N3910, 1N3911, 1N3912, 1N3913, 1N3909R, 1N3910R, 1N3911R, 1N3912R, AND 1N3912R |
| MIL-T-52823 Revision A:1983 | TARGET SET, SURVEYING |
| MIL-DTL-17896 Revision E:2008 | BAROMETER, ANEROID |
| MIL-S-45933 Base Document:1971 | STUD, KEYRING LOCKED, 125 AND 160 KSI FTU, GENERAL SPECIFICATION FOR |
| GGG-C-105 Revision C:1987 | CALIPER, MICROMETER (INSIDE, OUTSIDE, TUBE) AND GAGE, DEPTH, MICROMETER |
| MIL-S-15573 Revision A:1952 | STRAINER, SEDIMENT, PIPELINE (FOR GASOLINE SERVICE) |
| MIL-PRF-39012-2 Revision H:2006 | CONNECTORS, PLUGS AND RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES N (CABLED), FLANGE MOUNTED, SOCKET CONTACT, CLASS 2) |
| MIL-DTL-12285 Revision G:2016 | SWITCHES, THERMOSTATIC |
| MIL S 9395 : F | SWITCHES, PRESSURE, [ABSOLUTE, GAGE AND DIFFERENTIAL] GENERAL SPECIFICATION FOR |
| MIL-B-21442 Revision B:1963 | BATTERY, STORAGE, NICKEL-CADMIUM |
| MIL-DTL-16356 Revision E:2013 | GAUGES, DIRECT READING, OBLONG GLASS |
| GGG-S-75 Base Document:1955 | SAW SET, HAND |
| GGG-P-781 Revision E:1996 | PULLER, MECHANICAL PULLER ATTACHMENT, MECHANICAL, AND PULLER SET, MECHANICAL |
| MIL-PRF-23145 Revision C:2018 | Inflation Assemblies, Life Preserver |
| MIL-DTL-5815 Revision H:2012 | ANTENNA, AIRBORNE, UHF - BAND, GENERAL SPECIFICATION FOR |
| MIL-DTL-22992 Revision H:2015 | Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
| MIL-DTL-52649 Revision C:2009 | Engine Cold Starting Aids, Ether Fuel Primers |
| MIL-PRF-25670 Revision B:1997 | EARPHONE ELEMENTS, GENERAL SPECIFICATION FOR |
| MIL-DTL-39030 Revision F:2014 | DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR |
| MIL-DTL-21604 Revision G:2017 | Switches, Rotary, Multipole and Selector, General Specification for |
| MIL-P-45051 Revision D:1985 | PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC |
| MIL-S-64052 Base Document:1988 | SPRAY GUN, PAINT, HEAVY DUTY, PRESSURE FEED |
| MIL-P-87988 Base Document:1989 | PIN-RIVET, THREADED WITH HEX SOCKET |
| MIL-D-82687 Base Document:1980 | DEVICE, ARMING FIRING, ROCKET MOTOR MARK 298 MOD O |
| MIL F 85406 : 0 | FUSE SYSTEM, JOINT SERVICE ELECTRONIC BOMB FMU-139/B |
| SAE AS 1338 : 2014 | AEROSPACE METRIC 60 DEGREES SCREW THREAD PROFILE AND TOLERANCE CLASSES |
| MIL-T-55164 Revision C:1987 | TERMINAL BOARDS, MOLDED, BARRIER, SCREW AND STUD TYPES AND ASSOCIATED ACCESSORIES, GENERAL SPECIFICATION FOR |
| MIL-P-80186 Revision B:1991 | POSITIONERS, WELDING, ROTATING TABLE, CANTILEVER ARM DESIGN |
| MIL-PRF-32236 Base Document:2007 | GENERATOR, CHLORINE PORTABLE ELECTROLYTIC (PECG) |
| MIL-DTL-28791 Revision D:2016 | ISOLATORS AND CIRCULATORS, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| MIL S 19500/297 : B | SEMICONDUCTOR DEVICE, DIODE, SILICON POWER RECTIFIER TX AND NON TX TYPES 1N1184, 1N1186, 1N1188, 1N1190, 1N3766, 1N3768, 1N1184R, 1N1186R, 1N1188R, 1N1190R, 1N3766R, AND 1N3768R |
| RR-C-550 Revision D:1991 | CONTAINER, FLUID, FOR PAINT SPRAY EQUIPMENT |
| MIL-PRF-39012-138 Revision A:2013 | CONNECTOR, RECEPTACLE, ELECTRICAL, SERIES SSMA, SOCKET CONTACT, FOR SEMIRIGID CABLE |
| MIL A 27434 : A | ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, BETWEEN SERIES, GENERAL SPECIFICATION FOR |
| MIL-PRF-39012-35 Revision H:2011 | CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SC (CABLED), PIN CONTACT, CLASS 2) |
| MIL I 18369 : C | INFLATION EQUIPMENT, CARBON DIOXIDE, FOR MULTIPLACE LIFE RAFTS |
| MIL C 83729 : A | CHOPPER, ELECTROMECHANICAL GENERAL SPECIFICATION FOR |
| MIL-PRF-39012-71 Revision B:2011 | CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMB (UNCABLED, MALE, JAMNUT MOUNTED, CLASS 2) |
| MIL-B-45989 Revision C:1985 | BALANCER, VEHICLE WHEEL, BUBBLE-TYPE, PORTABLE |
| MIL C 62 : F | CAPACITOR, FIXED, ELECTROLYTIC (DC, ALUMINUM, DRY ELECTROLYTE, POLARIZED), GENERAL SPECIFICATION FOR |
| MIL-PRF-39012-20 Revision H:2006 | CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2) |
| MIL R 22 : C | RESISTOR VARIABLE (WIREWOUND POWER TYPE) GENERAL SPECIFICATION FOR |
| MIL-A-22891 Base Document:1962 | AMPLIFIER, ERROR LIGHT, ASSEMBLY |
| MIL-T-45568 Revision G:1986 | TEST SET, TACHOMETER-DWELL |
| MIL B 5423 : C | BOOT, DUST AND WATER SEAL 1 [FOR TOGGLE AND PUSHBUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY ACTUATED PARTS] GENERAL SPECIFICATION FOR |
| GGG-E-950 Revision A:1988 | EXTRACTOR, STUFFING BOX AND PUMP PACKING (AND TAMPER); AND EXTRACTOR, LANTERN GLAND |
| MIL-T-52993 Base Document:1981 | TABLE, PHOTOINTERPRETER & ANALYST, ILLUMINATED, SPLIT STAGE |
| GGG-S-0075 Revision A:1966 | SAW SET, HAND |
| MIL S 0053085 : A | SURVEY INSTRUMENT AUTOMATED, INTEGRATED (AISI) |
| MIL I 45932 : 0 | INSERT, SCREW THREAD, THIN WALL, LOCK IN |
| MIL-S-80271 Revision A:1992 | SHEARING MACHINE, METAL SQUARING MECHANICAL DRIVE |
| PREN 3218-001 : 200P1 | AEROSPACE SERIES - CONNECTORS, RECTANGULAR, WITH METALLIC SHELLS AND SCREW-LOCKING - PART 001: TECHNICAL SPECIFICATION |
| PREN 3545-001 : 200P4 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
| ASTM A 338 : 1984 : R2009 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
| ASTM F 1565 : 2000 : R2013 | Standard Specification for Pressure-Reducing Valves for Steam Service |
| B339-14 | Cylinders, spheres, and tubes for the transportation of dangerous goods |
| SAE AS 5944 : 1999 | SLINGS, AIRCRAFT, GENERAL SPECIFICATION FOR |
| ASTM A 338 : 1984 : R2014 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
| ASTM F 1755M : 1996 | Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric) |
| ASTM F 1755M : 1996 : R2007 | Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric] |
| ASTM A 338 : 1984 : R2004 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
| BS EN 3545-005:2014 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C Female coding and attachment System for mounting on free housing (plug). Product standard |
| BS EN 2997-10:1997 | Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peak Protective cover for plug. Product standard |
| SAE AS 95234A : 2020 | CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
| BS EN 3545-001:2008 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°C Technical specification |
| MIL-DTL-83731 Revision E:2016 | SWITCHES, TOGGLE, UNSEALED AND SEALED, GENERAL SPECIFICATION FOR |
| A-A-59494 Revision B:2016 | WHEELS AND HUBS FOR INDUSTRIAL PNEUMATIC TIRES |
| MIL-DTL-83513 Revision G:2008 | Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for |
| MIL-B-87114 Revision A:1978 | BOLTS, RECESS DRIVE, GENERAL SPECIFICATION FOR |
| MIL-C-29169 Revision A:1983 | CONDUIT, AND CONDUIT FITTINGS, METAL, RIGID POLYVINYL CHLORIDE [PVC] COATED |
| MIL-DTL-24151 Revision B:2016 | DOORS, ROLLER CURTAIN AND HINGED SLAT, AND ASSOCIATED OPERATING EQUIPMENT |
| MIL C 55629 : B | CIRCUIT BREAKERS, MAGNETIC, UNSEALED, TRIP-FREE, SINGLE POLE, FRONT MOUNTED, AUXILIARY CONTACTS (1 TO 100 AMPERES) |
| MIL-B-44037 Revision A:1986 | BLENDER, POWERED MIX, MECHANICALLY REFRIGERATED |
| MIL-DTL-3607 Revision C:2009 | Connectors, Coaxial, Radiofrequency, Series for Pulse, General Specification for |
| MIL-DTL-28778 Revision A:2005 | TRANSFORMER, POWER, STEPUP, 3 PHASE |
| MIL-E-24269 Revision B:1988 | EXTINGUISHER, FIRE, CARBON DIOXIDE, 15 POUND, PORTABLE, PERMANENT SHUTOFF, NAVY SHIPBOARD USE |
| MS27291 Revision H:2015 | SUPPORT, CABLE, ELECTRICAL CONNECTOR, FOR MIL-DTL-26500 |
| MIL-C-10933 Revision E:1985 | CHILLED WATER UNITS, BAKERY |
| MIL-DTL-22641 Revision G:2016 | ADAPTERS, COAXIAL TO WAVEGUIDE, GENERAL SPECIFICATION FOR |
| MIL-C-29184 Revision B:1991 | Cable Assemblies, Power, Electrical, for Portable Panelboards, General Specification for |
| MIL-P-52327 Revision C:1990 | PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN, POSITIVE PRIME, PETROLEUM PRODUCTS, AIRFIELD DEFUELLING AND RECEIVING |
| MS3186 Revision G:2011 | CONNECTOR, MOUNTING TO CONNECTORS, MOUNTING NUTS, PLAIN HEXAGON |
| MIL-C-13874 Revision K:1992 | COMPRESSORS, RECIPROCATING AND ROTARY, AIR, ELECTRIC MOTOR DRIVEN |
| MIL-PRF-31031 Revision C:2014 | CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES, GENERAL SPECIFICATION FOR |
| MIL P 29183 : B | PANELBOARD, POWER DISTRIBUTION PORTABLE WEATHERPROOF, GENERAL SPECIFICATION FOR |
| MIL-PRF-39012 Revision F:2014 | CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| MIL PRF 83513 : D | CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
| MIL-PRF-22710 Revision H:2013 | Switches, Code Indicating Wheel (Printed Circuit), Thumbwheel and Push-Button, General Specification for |
| MIL-G-19826 Revision F:1984 | GENERATOR SET, DIESEL ENGINE, ALTERNATING CURRENT FOR FACILITIES CONSTRUCTION, 1O KW THRU 500 KW (NOT STOCKED) |
| MS51115 Revision B:2008 | Coil, Ignition-24 Volt DC (Without Internal Ballast) (No S/S Document) |
| MIL-DTL-15743 Revision F:2017 | SWITCHES, ROTARY, ENCLOSED |
| MIL-DTL-7790 Revision A:2002 | RESISTOR, THERMOCOUPLE LEAD SPOOL |
| OO-L-2880 Base Document:1997 | LAUNDRY UNIT, SKID-MOUNTED, 100 POUNDS (DRY WEIGHT) PER HOUR |
| W-G-663 Revision B:1970 | GRINDER, ELECTRIC, PORTABLE |
| W-S-564 Revision C:1991 | SOLDERING GUNS, ELECTRIC |
| MIL V 24630 : 0 | VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID |
| W-S-570 Revision B:1989 | SOLDERING IRON ELECTRIC |
| MIL-P-53065 Base Document:1986 | PUMPING UNIT, FRAME MOUNTED, 1-1/2 INCH, ELECTRIC MOTOR DRIVEN, 35 GPM AT 25 FEET TOTAL HEAD |
| W-J-800 Revision F:1992 | JUNCTION BOX, EXTENSION, JUNCTION BOX, COVER, JUNCTION BOX, (STEEL, CADMIUM OR ZINC COATED) |
| W-S-896 Revision G:2014 | SWITCHES, TOGGLE (TOGGLE AND LOCK), FLUSH MOUNTED (GENERAL SPECIFICATION) |
| MIL S 8805 : D | SWITCHES, AND SWITCH ASSEMBLIES, SENSITIVE AND PUSH, SNAP ACTION, GENERAL SPECIFICATION FOR |
| MIL S 22885 : E | SWITCH, PUSH BUTTON, ILLUMINATED, GENERAL SPECIFICATION FOR |
| MIL S 83731 : A | SWITCH, TOGGLE, UNSEALED AND SEALED TOGGLE, GENERAL SPECIFICATION FOR |
| MIL-R-13877 Revision D:1987 | REGULATOR, OXYGEN, ACETYLENE, WELDING APPLICATION |
| MS51114 Revision D:2008 | Coil, Ignition-24 Volt DC (With Internal Ballast) (No S/S Document) |
| W-F-406 Revision E:1993 | FITTINGS FOR CABLE, POWER, ELECTRICAL AND CONDUIT, METAL, FLEXIBLE |
| MIL-DTL-32139 Revision B:2017 | Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for |
| MIL-T-81364 Base Document:1966 | T-BOLT, 180,000 PSI TYPE 431 STAINLESS STEEL, MANUFACTURING PROCESS REQUIREMENTS |
| MIL C 38159 : B | CONNECTOR, ELECTRIC, RAMP POWER, 480/277 VOLTS, GENERAL SPECIFICATION FOR |
| MIL-P-80279 Base Document:1991 | PUNCHING, SHEARING, NOTCHING, AND COPING MACHINE, METAL, HYDRAULIC DRIVEN, FOUR STATION TYPE |
| MIL-STD-107 Revision J:2001 | PREPARATION AND HANDLING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE |
| MIL H 51191 : D NOTICE 1 | HEATER, AIR, ELECTRIC, FILTER UNIT, M3 |
| MIL-P-80280 Base Document:1991 | PUNCHING, ANGLE AND BAR SHEARING MACHINE, METAL, HYDRAULICALLY DRIVEN, THREE STATION TYPE |
| MIL-DTL-29183 Revision C:2003 | PANELBOARDS, POWER DISTRIBUTION, PORTABLE, WEATHERPROOF, GENERAL SPECIFICATION FOR |
| MIL-STD-1251 Revision A:1981 | SCREW AND BOLTS PREFERRED FOR DESIGN, LISTING OF |
| MIL-DTL-24652 Revision A:2016 | Extinguisher, Fire, Aqueous Film Forming Foam (AFFF), 2.5-Gallon |
| MIL-STD-2003-2 Revision A:2009 | ELECTRIC PLANT INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (EQUIPMENT) |
| MIL-PRF-22885 Revision J:2016 | Switches, Push Button, Illuminated, General Specification for |
| MIL-DTL-28827 Revision C:2011 | SWITCHES, THERMOSTATIC, (VOLATILE LIQUID), HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| GGG-E-2814 Base Document:1993 | ETCHERS, ELECTRIC, PORTABLE |
| MIL-N-52110 Revision F:1982 | NOZZLE, FUEL & OIL SERVICING, NONAUTOMATIC SHUTOFF & NOZZLES, FUEL SERVICING AUTOMATIC SHUTOFF |
| MIL-PRF-8805 Revision G:2016 | SWITCHES AND SWITCH ASSEMBLIES, SENSITIVE, SNAP ACTION (BASIC, LIMIT, PUSH BUTTON AND TOGGLE SWITCHES), GENERAL SPECIFICATION FOR |
| MIL-DTL-32360 Base Document:2010 | STOP LIGHT - TAILLIGHT, VEHICULAR-24 VOLT, SERVICE STOP, SERVICE TAIL, BLACKOUT TAIL |
| MIL S 3786 : F | SWITCH, ROTARY, CLOSED CONSTRUCTION, 2 AMPERES, LOW LEVEL, POSITIVE SHAFT GROUNDING STYLE SR04 |
| MIL-DTL-3950 Revision K:2016 | Switches, Toggle, Environmentally Sealed, General Specification for |
| MIL-DTL-9395 Revision K:2016 | Switches, Pressure (Absolute, Gage and Differential) General Specification for |
| MIL-PRF-27 Revision G:2014 | TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR |
| ANEP-80 : 2009 | NATO SONOBUOY INTEROPERABILITY SPECIFICATION - COMMON SPECIFICATIONS |
| MIL-DTL-28748-17 Revision B:2016 | CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, HARDWARE FOR |
| MIL-DTL-16225 Revision C:2010 | LOUDSPEAKER, PERMANENT MAGNET, BLASTPROOF AND SUBMERSIBLE, NAVY TYPE 49546() |
| MIL-DTL-6749 Revision B:2008 | RESISTOR, VARIABLE, WIREWOUND, NONPRECISION, AIRCRAFT POWER |
| MIL-PRF-55629 Revision E:2011 | CIRCUIT BREAKERS, MAGNETIC, UNSEALED OR PANEL SEAL, TRIP-FREE, GENERAL SPECIFICATION FOR |
| CC-G-2745 Base Document:1984 | GENERATOR SETS, DIESEL ENGINE, ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION; 10 KW THROUGH 1000 KW (NOT STOCKED) |
| GG-G-76 Revision E:1980 | GAGES, PRESSURE AND VACUUM, DIAL INDICATING (FOR AIR, STEAM, OIL, WATER, AMMONIA, CHLORO-FLUORO HYDROCARBON GASES, AND COMPRESSED GASES) |
| MIL-S-82496 Revision A:1977 | SCREWS, MACHINE, SELF SEALING, INTEGRAL O-RING |
| MIL-DTL-12606 Revision E:2000 | LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3-INCH AND 4-INCH DIAMETER CONE, 2-WATT; FUNGUS-, AND IMMERSION-RESISTANT), TYPE LS-445/U, M12606-01, AND M12606-02 |
| MIL-D-23615 Revision C:1993 | DESIGN AND EVALUATION OF CARTRIDGE ACTUATED DEVICES |
| MIL-DTL-12632 Revision E:2016 | LOUDSPEAKERS, PERMANENT MAGNET (ENCASED, 2-WATT, FUNGUS-, GUNBLAST-, AND IMMERSION-RESISTANT), GENERAL SPECIFICATION FOR |
| MIL-DTL-55041 Revision F:2012 | Switches, Waveguide, General Specification for |
| MIL-DTL-24646 Revision C:2015 | FUSE BOXES, GENERAL SPECIFICATION FOR |
| MIL-R-85880 Base Document:1988 | ROCKET, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL-DTL-10911 Revision E:2012 | LOUDSPEAKERS, PERMANENT MAGNET, (UNENCASED, 2.5-, 3-, 4-, 5-, 6-, 8-, 10-, AND 12-INCH DIAMETER CONES), GENERAL SPECIFICATION FOR |
| W-D-661 Revision E:1995 | DRILL, ELECTRIC, PORTABLE, (EXCLUSIVE OF HIGH FREQUENCY TYPES) AND STAND, PORTABLE ELECTRIC DRILL, VERTICAL |
| MIL-DTL-2726 Revision C:2006 | RECEPTACLE, RECEPTACLE PLUGS, SWITCH AND RECEPTACLES, AND OUTLETS (ELECTRICAL), GENERAL SPECIFICATION FOR |
| MIL-DTL-24317 Revision B:2010 | SWITCHES, MULTISTATION, PUSHBUTTON, ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR |
| MIL-B-23990 Revision C:1984 | BLOCKS, TACKLE, WIRE ROPE, EXTRA HEAVY DUTY |
| MIL S 28827 : A | SWITCH, THERMOSTATIC, (VOLATILE LIQUID) HERMETICALLY SEALED GENERAL SPECIFICATION FOR |
| MIL-F-18327 Revision F:2008 | FILTERS; HIGH PASS, LOW PASS, BAND PASS, BAND SUPPRESSION, AND DUAL FUNCTIONING, GENERAL SPECIFICATION FOR |
| SAE AS 95234 : 2014 | CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
| MS24700 Revision B:2005 | Bushing, Fixed, Connector, Rack and Panel, Miniature |
| A-A-51149 Revision A:1991 | CHUCKS, INDEPENDENT TYPE, FOUR-JAW |
| MIL-DTL-15370 Revision K:2015 | COUPLERS, DIRECTIONAL, GENERAL SPECIFICATION FOR |
| MIL-DTL-20064 Revision F:2014 | VALVE, NONFERROUS, FOR USE WITH HALOGENATED REFRIGERANTS |
| IEEE DRAFT 1505 : 0 | RECEIVER FIXTURE INTERFACE SPONSORED BY THE CONNECTORS TECHNICAL COMMITTEE TC-55 OF THE IEEE INSTRUMENTATION & MEASUREMENT SOCIETY |
| MIL-A-28737 Revision A:1977 | ANTENNA, IFF, AS-2188(),(3 METERS) (1O FEET)), AS-2189 (1.8 METERS (6 FEET)) |
| MIL-C-0052980 Revision C:1994 | COMPRESSORS, RECIPROCATING AND ROTARY, AIR DIESEL-ENGINE-DRIVEN, OR GASOLINE-ENGINE-DRIVEN |
| MIL-H-4607 Revision E:1987 | HEATER, ENGINE AND SHELTER, GROUND |
| MIL-B-52734 Revision C:1991 | BRIDGE FLOATING RIBBON INTERIOR BAY AND RAMP BAY |
| DSCC 99003 : B | SEMICONDUCTOR DEVICE, THYRISTOR, REVERSE BLOCKING, SILICON, TYPES 2N1792 AND 2N1910 FAMILIES |
| MIL-T-52114 Revision G:1991 | THEODOLITE, SURVEYING, DIRECTIONAL, THIRD ORDER |
| MIL-DTL-39000 Revision C:2013 | Flanges, Waveguide, Ridge, General Specification for |
| MIL-B-53107 Base Document:1990 | BRIDGE, LIGHT ASSAULT 23 METER SPAN |
| MIL-DTL-16556 Revision F:2017 | Valve, Solenoid, Three-Way Bypass ( Naval Shipboard Use ) |
| MIL-T-52942 Revision C:1996 | TRUCK, FIRE FIGHTING: PUMPER, 1000 GPM; LADDER/WATER TOWER COMBINATION |
| MIL-G-24745 Base Document:1990 | GOVERNORS, STEAM DRIVEN PUMP, PRESSURE REGULATING, NAVAL SHIPBOARD, 600 POUNDS PER SQUARE INCH STEAM SERVICE |
| MIL-D-12491 Revision E:1989 | DEGREASER, SOLVENT, TANK IMMERSION TYPE |
| MIL A 28875 : 0 | AMPLIFIER, RADIO FREQUENCY AND MICROWAVE, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL-P-85710 Base Document:1986 | PARACHUTES, PERSONNEL, EMERGENCY ESCAPE GENERAL DESIGN SPECIFICATION FOR |
| BS IEC 63004:2015 | Standard for receiver fixture interface |
| F-V-2906 Base Document:1997 | VALVES, AIR VENTING, STEAM |
| DOD-P-24639 Base Document:1984 | PROPELLER, FIXED PITCH, SHIP (METRIC) |
| MIL C 83733 : C | CONNECTOR, ELECTRICAL, MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR |
| MIL M 17060 : F | MOTORS, 60-HERTZ, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE |
| MIL C 00555 : K | COMPRESSORS, AIR, RECIPROCATING AND ROTARY, DIESEL ENGINE DRIVEN |
| MIL-C-13899 Revision F:1985 | COMPRESSOR UNIT, ROTARY: AIR, WHEELBARROW-FRAME-MOUNTED, TWO PNEUMATIC TIRES, GASOLINE-ENGINE-DRIVEN, 60-CFM, 6.5-PSIG |
| MIL-DTL-55023 Revision D:2011 | MANOMETERS, U-TUBE AND CURVED TUBE |
| MIL F 16377 : G | FIXTURE, LIGHTING, INCANDESCENT, GENERAL LIGHTING 100 WATTS, 120 VOLTS, DRIPPROOF 15 DEGREES, SYMBOLS 89 & 90.2 |
| MIL E 17807 : C | ELEVATOR, WEAPON AND CARGO, ELECTROMECHANICAL (SHIPBOARD) |
| MIL-T-55155 Revision C:1993 | TERMINALS, FEEDTHRU (INSULATED) AND TERMINALS, STUD (INSULATED AND NONINSULATED), GENERAL SPECIFICATION FOR |
| MIL-DTL-13625 Revision G:2017 | SWITCHES, PULL; SWITCHES, PUSH; SWITCHES, BEAM SELECTING, HEADLIGHT: ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES) |
| MIL-I-45934 Base Document:1971 | INSERT, SCREW THREAD, KEYRING LOCKED, SELF LOCKING AND NON SELF LOCKING, 125, 180, AND 220 KSI FTU: GENERAL SPECIFICATION FOR |
| MIL-C-4109 Revision F:1986 | COUPLING ASSEMBLY, LOW PRESSURE, AIR HOSE, QUICK-DISCONNECT |
| MS39232 Revision C:2015 | REDUCER, PIPE RIGHT HAND THREAD (150 AND 300 POUNDS) |
| MIL-PRF-31031-43 Base Document:2008 | Connector, Electrical, Receptacle, Radio Frequency, High Reliability, Coaxial, Series BMZ, Right Angle, Pin Contact, for Semirigid Cable |
| SAE AS 29600 : 2017 | CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS ASSOCIATED HARDWARE, GENERAL SPECIFICATION FOR |
| MIL-DTL-16377 Revision J:2014 | Fixtures, Lighting; and Associated Parts; Shipboard Use, General Specification for |
| MIL-C-24217 Revision A:1984 | CONNECTOR, ELECTRICAL, DEEP SUBMERGENCE, SUBMARINE |
| MIL-C-85049 Revision A:1990 | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
| MIL-C-81093 Revision B:1984 | CARTRIDGES, EXPLOSIVE BOLT, (FOR TORPEDOES MARK 46 ALL MODS) |
| MIL-T-17523 Revision D:1976 | TURBINE, STEAM, AUXILIARY (AND REDUCTION GEAR) MECHANICAL DRIVE |
| MIL-B-18966 Revision C:1984 | BLOCKING PLANT, CONCRETE |
| MIL-DTL-25516 Revision F:2004 | CONNECTORS, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
| MIL V 16556 : E | VALVE, SOLENOID, THREE-WAY BYPASS (NAVAL SHIPBOARD USE) |
| MIL-DTL-28837 Revision D:2015 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL-DTL-22442-25 Revision B:1998 | ASSEMBLY, AIRCRAFT AUDIO, MOLDED RUBBER CONNECTOR MECHANICAL GAUGES |
| XP PREN 3545-001 : 1997 XP | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREE C TO 175 DEGREE C - PART 001: TECHNICAL SPECIFICATION |
| MIL S 1222 : H | STUD, BOLTS, HEX CAP SCREWS, SOCKET HEAD CAP SCREWS AND NUTS |
| MIL-W-52161 Revision D:1989 | WELDING SET, ARC, INERT GAS, SHIELDED: CONSUMABLE WIRE ELECTRODE |
| MIL-PRF-15733 Revision J:2010 | FILTERS AND CAPACITORS, RADIO FREQUENCY INTERFERENCE, GENERAL SPECIFICATION FOR |
| MIL-DTL-24552 Revision B:2001 | TERMINALS AND SEALS, PLUGS AND SWITCH, CASUALTY POWER SYSTEMS, RECEPTACLE TYPE, GENERAL SPECIFICATION FOR |
| O-A-445 Revision C:2003 | AMMONIA, TECHNICAL |
| MIL F 28861 : B | FILTER AND CAPACITOR, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| MIL-P-10360 Revision G:1993 | PUMP, CENTRIFUGAL 4 INCH AND 6 INCH, GASOLINE ENGINE AND DIESEL ENGINE DRIVEN FOR WATER |
| MIL-PRF-12732 Revision F:2010 | HYPOCHLORINATION UNIT, WATER PURIFICATION, FRAME MOUNTED, AUTOMATICALLY CONTROLLED 2 TO 350 GPM FLOW |
| MIL-T-14091 Revision E:1988 | TRIPOD, SURVEYING, EXTENSION-LEG-TYPE |
| MIL R 11767 : F | RELAY ASSEMBLY, GUN & FIRING, WATERPROOF, 24 VOLT DIRECT CURRENT |
| MIL-M-21039 Revision B:1979 | MAGNIFIER, MEASURING TUBE TYPE, SEVEN POWER AR-60( ) |
| MIL-P-52746 Revision C:1994 | PUMP ASSEMBLY, FLAMMABLE LIQUID, CENTRIFUGAL, SELF PRIMING 2 INCH 100 GPM AT 100 FEET TOTAL DYNAMIC HEAD |
| MIL H 17902 : F | HOSE, END FITTINGS AND HOSE ASSEMBLIES, SYNTHETIC RUBBER, AIRCRAFT FUELS |
| GG-T-355 Revision B:1967 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, MAXIMUM, (METEOROLOGICAL) |
| GGG-P-151 Revision B Interim Revision:1971 | PEAVY; HOOK, CANT; AND CARRIER, TIMBER |
| MIL-S-81039 Revision A:1968 | SWITCH HYDROSTATIC, MARK 110 MOD 0 |
| MIL F 45968 : A | FITTINGS, AUTOMOTIVE TUBE, BRASS INVERTED FLARE (WITH STEEL NUT) |
| GGG-P-00475 Base Document:1964 | PLIERS, JEWELLERS |
| GGG-S-63 Revision C:1976 | SAW, CIRCULAR, PORTABLE, PNEUMATIC |
| MIL C 9177 : B | CONNECTOR, AUDIO, AIRBORNE, GENERAL SPECIFICATION FOR |
| MIL-PRF-39012-76 Revision D:2011 | CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMC (CABLED, PIN CONTACT, JAMNUT MOUNTED, REAR MOUNTED, CLASS 2) |
| MIL-C-83439 Base Document:1974 | CAPACITOR, FIXED, FEED THROUGH, ELECTROMAGNETIC INTERFERENCE SUPPRESSION, (AC, OC, AND AC-DC)(HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR |
| MIL-F-19700 Revision A:1987 | FASTENERS, SCREW THREADED, AND RELATED ITEMS, NON-MAGNETIC |
| MIL H 6615 : E | HOSE ASSEMBLIES, RUBBER, FUEL AND WATER, WITH DETACHABLE COUPLINGS, LOW TEMPERATURE |
| MIL-DTL-32408 Base Document:2012 | INTEGRAL MOTOR PUMP (IMP) |
| MIL S 19500/304 : C | SEMICONDUCTOR DEVICE, DIODE, SILICON, POWER RECTIFIER, FAST RECOVERY TYPES 1N3885, 1N3886, 1N3888, 1N3890, 1N3891, 1N3893, 1N3890R, 1N3891R, AND 1N3893R JAN JANTX JANTXV AND JANS |
| MIL-S-62742 Base Document:1992 | SWITCH, PRESSURE (METRIC) |
| MIL S 19500/260 : D | SEMICONDUCTOR DEVICE, DIODE, SILICON POWER RECTIFIER |
| MIL-W-80062 Revision C:1985 | WELDING MACHINE, ARC, DC, TRANSFORMER RECTIFIER, ADJUSTABLE CONSTANT VOLTAGE |
| MIL-DTL-83503 Revision C:2005 | Connectors, Electrical, Flat Cable, and/or Printed Wiring Board, Nonenvironmental General Specification for |
| MIL L 3976 : D | LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT) |
| MIL-PRF-39012-55 Revision H:2011 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SMA (CABLED) - PLUG, PIN CONTACT, CLASS 2) |
| GGG-F-001391 Base Document:1967 | FILER, PISTON RING |
| MIL-DTL-32361 Revision A:2011 | COMPOSITE LIGHT, TAIL STOP, TURN AND MARKER |
| MIL C 45918 : 0 | CLEVISES AND CONNECTORS (ROD END) |
| GGG S 00278 : A (4) | SHEARS AND SCISSORS |
| MIL T 24552 : A | TERMINALS AND PLUGS, CASUALTY POWER SYSTEMS, RECEPTACLE TYPE, GENERAL SPECIFICATION FOR |
| DOD-B-24668 Base Document:1986 | BEARING UNIT, MAIN THRUST, SUBMARINE PROPULSION SYSTEM |
| MIL-G-22077 Revision C:1993 | GENERATOR SETS, GAS TURBINE, DIRECT AND ALTERNATING CURRENT NAVAL SHIPBOARD USE |
| MIL-DTL-24705 Revision B:2010 | PENETRATORS, MULTIPLE CABLE, ELECTRIC CABLE, GENERAL SPECIFICATION FOR |
| MIL C 38999 : J | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET THREADED & BREECH COUPLING) ENVIRONMENT RESISTANT, REMOVABLE CRIMP & HERMETIC SOLDER CONTACTS |
| MIL-S-85377 Revision A:1983 | SWITCH, STEPPING, DIRECT CURRENT AIRCRAFT DISPENSER |
| BS 6121-3:1990 | Mechanical cable glands Specification for special corrosion resistant glands |
| MIL-H-87111 Revision A:1984 | HEAT SINKS, SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
| MIL-R-52255 Revision D:1988 | REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS, DRUMS, AND BOATS |
| DOD-STD-35-36 Revision B:1979 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING |
| MIL-F-80188 Revision B:1985 | FURNACE, HEAT TREATING, ELECTRIC, METAL LINED, BOX DESIGN |
| MIL-B-13136 Revision B:1968 | BATTERIES DRY |
| MIL-PRF-39012-17 Revision H:2006 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC, (CABLED), SOCKET CONTACT, CLASS 2) |
| MIL-B-45857 Revision C:1985 | BORING MACHINE, CAM AND MAIN BEARINGS (STATIONARY) |
| MIL-W-80235 Revision C:1991 | WELDING MACHINES, ELECTRICAL RESISTANCE, SPOT, PRESS TYPE, AIR OPERATED, SINGLE PHASE, ALTERNATING CURRENT (AC) |
| ASTM F 975 : 1986 : R1993 : EDT 1 | Specification for Auxiliary Single Stage Steam Turbines for Shipboard Use (Withdrawn 2000) |
| MIL-DTL-3976 Revision F:2013 | Lights, Marker, Clearance (Service and Blackout) General Specification for |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| MIL-PRF-22 Revision E:2007 | RESISTOR, VARIABLE, WIREWOUND, POWER TYPE, GENERAL SPECIFICATION FOR |
| MIL-M-17522 Revision D:1967 | MASK, PROTECTIVE, ND MARK V |
| MIL-H-11511 Revision G:1980 | HEATER, SPACE, MULTIFUEL, WITH BLOWER 60,000 BTU/HR |
| MIL-DTL-24127 Revision A:2016 | EDUCTORS, GASOLINE, OIL, OR WATER |
| MIL-D-24 Revision C:1984 | DYNAMOTOR, GENERAL SPECIFICATION FOR |
| MIL G 16356 : D | GAGE, BOILER WATER, DIRECT READING |
| MIL H 28523 : B | HOSE ASSEMBLY, RUBBER, HYDRAULIC AND PNEUMATIC, JETTING (4OO PSI WORKING PRESSURE) |
| MS35122 Revision B:2005 | PLUG, CONNECTOR (TYPE SM) UG-699/U |
| MIL-C-19908 Revision D:1986 | CAPS, FUEL STORAGE TANK |
| MIL-T-28571 Revision G:1991 | TRUCK, FIREFIGHTING, STRUCTURAL, 1,OOO GPM, 4 BY 2 |
| MIL-DTL-16034 Revision B:2008 | METERS, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES), GENERAL SPECIFICATION FOR |
| MIL-DTL-13625-2 Revision C:2017 | SWITCHES, PULL; SWITCHES, PUSH; SWITCHES, BEAM SELECTING, HEADLIGHT: ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES) |
| ARINC 628-6 : 2002 | CABIN EQUIPMENT INTERFACES - PART 6: FIBER OPTIC CABLE ASSEMBLY GENERAL SPECIFICATION |
| MIL-DTL-28754 Revision E:2016 | Connectors, Electrical, Modular, and Component Parts General Specification for |
| MIL-PRF-28861 Revision E:2016 | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| MIL-DTL-83729 Revision C:2013 | CHOPPERS, ELECTROMECHANICAL, GENERAL SPECIFICATION FOR |
| MIL R 94 : E | RESISTORS, VARIABLE, COMPOSITION, GENERAL SPECIFICATION FOR |
| MIL-C-52037 Revision F:1990 | COMPRESSOR UNIT, RECIPROCATING, POWER DRIVEN, AIR, 15 CFM 3,500 PSI |
| MIL-DTL-83526 Revision D:2014 | CONNECTORS, FIBER OPTIC, CIRCULAR, ENVIRONMENTAL RESISTANT, HERMAPHRODITIC, GENERAL SPECIFICATION FOR |
| MIL-M-16125 Revision C:1963 | METERS, ELECTRICAL, FREQUENCY |
| MIL-B-45022 Revision F:1992 | BLAST CLEANING CABINETS |
| MIL C 39024 : A | CONNECTOR, ELECTRICAL, TEST POINT TYPE, PANEL TYPE, SINGLE TEST POINT (THREADED), HIGH VOLTAGE |
| MIL C 15370 : F | COUPLERS, DIRECTIONAL GENERAL SPECIFICATION FOR |
| SAE AS 7928 : 2011 | TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| IEC 63004:2015 | Standard for receiver fixture interface |
| SAE AS 85028 : 2017 | CONNECTOR, ELECTRICAL, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, GENERAL SPECIFICATION FOR |
| SAE AS 5680 : 2012 | FUZE WELL MECHANICAL INTERFACE |
| ASTM A 338 : 1984 : R1998 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
| BS EN 2997-1:1997 | Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peak Technical specification |
| BS EN 2997-9:1997 | Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peak Protective cover for receptacle. Product standard |
| I.S. EN 3545-001:2008 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
| MIL-DTL-5015 Revision H:2000 | CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR |
| MIL-G-18997 Revision E:1991 | GAUGE, PRESSURE, DIAL INDICATING |
| MIL-DTL-45932 Revision A:2015 | INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR |
| I.S. EN 3545-005:2014 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 005: FEMALE CODING AND ATTACHMENT SYSTEM FOR MOUNTING ON FREE HOUSING (PLUG) - PRODUCT STANDARD |
| I.S. EN 3545-006:2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 006: MALE CODING AND ATTACHMENT SYSTEM FOR MOUNTING ON FIXED HOUSING (RECEPTACLE) - PRODUCT STANDARD |
| MIL-DTL-85061 Revision C:2009 | COUPLING, FUEL LINE, FLEXIBLE, 125 PSI |
| BS 6121-1:1989 | Mechanical cable glands Specification for metallic glands |
| MIL S 19500/550 : A | SEMICONDUCTOR DEVICE, DIODE, SILICON, FAST RECOVERY HIGH CURRENT TYPES 1N6304, 1N6305, 1N6305, IN6306 AND -R TYPES JAN, JANTX, JANTXV |
| BB-C-120 Revision C:1980 | CHLORINE, TECHNICAL: LIQUID |
| MIL C 83503 : A | CONNECTOR, ELECTRICAL, FLAT CABLE, AND/OR PRINTED WIRING BOARD, NONENVIRONMENTAL GENERAL SPECIFICATION FOR |
| MIL-V-24740 Base Document:1990 | VALVE, SAFETY, BOILER, REMOTE PILOT OPERATED, FOR SHIPBOARD USE |
| GG-T-321 Revision D:1977 | THERMOMETERS, SELF-INDICATING, LIQUID-IN-GLASS FOR MACHINERY AND PIPING SYSTEMS |
| MIL-PRF-12934 Revision L:2009 | Resistor, Variable, Wirewound, Precision General Specification for |
| MIL-DTL-39012-9 Revision D:2017 | CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES C, (CABLED-RECEPTACLE, FEMALE, JAM NUT, FRONT MOUNTED, CLASS 2) |
| MIL-PRF-39012-29 Revision H:2010 | CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES TNC, (CABLED), SOCKET CONTACT, FLANGE MOUNTED, CLASS 2) |
| MIL S 6807 : D | SWITCHES, ROTARY, SELECTOR POWER - GENERAL SPECIFICATION FOR |
| GGG-B-121 Revision B:1964 | BAR, SINE; PLATE SINE (AND FIXTURES) |
| GGG-K-494 Revision C:1996 | KNIVES; GENERAL PURPOSE SHOP, DETACHABLE BLADE |
| MIL C 39012/19 : G | CONNECTOR, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC, (CABLED), SOCKET CONTACT, JAM NUT MOUNTED, CLASS 2) |
| MIL-A-11892 Base Document:1952 | ANTENNA GROUP OA-249( )/GRC-10 (COMPONENTS OF) |
| MIL-PRF-39012-16 Revision H:2006 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES BNC (CABLED), PIN CONTACT, CLASS 2) |
| MIL-E-24142 Revision B:1984 | ENCLOSURE FOR ELECTRICAL FITTINGS AND FIXTURES, GENERAL SPECIFICATION FOR |
| GGG-V-410 Revision B:1993 | VISE, BENCH BASE; SHEET METAL-WORKER'S; BENCH AND PIPE; JEWELER'S; MACHINISTS; AND MULTIPOSITION |
| ASTM F 1565 : 2000 : R2019 | Standard Specification for Pressure-Reducing Valves for Steam Service |
| MIL-DTL-18866 Revision J:2015 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for |
| MIL-P-52539 Revision B:1984 | PIPELINE WELD SET TESTING |
| MS39202 Revision G:2012 | ELBOWS, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE, MALE PIPE END |
| MS39201 Revision G:2012 | NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE |
| MIL-F-3541 Revision C:1989 | FITTING, LUBRICATION, GENERAL SPECIFICATION FOR |
| FF-C-450 Revision G:2017 | CLAMPS, WIRE ROPE |
| MIL C 15730 : M | COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER |
| MIL-DTL-3928 Revision H:2016 | SWITCHES, RADIO-FREQUENCY TRANSMISSION LINE, (COAXIAL AND MICROSTRIP), GENERAL SPECIFICATION FOR |
| MIL-A-2550 Revision B:1973 | AMMUNITION, GENERAL SPECIFICATION FOR |
| MIL-PRF-31031-42 Base Document:2008 | Connector, Electrical, Receptacle, Radio Frequency, High Reliability, Coaxial, Series BMZ, Socket Contact, for Semirigid Cable |
| MIL-PRF-55339 Revision C:2005 | Adapters, Connectors, Coaxial, Radio Frequency, (Between Series and within Series), General Specification for |
| MIL-DTL-3954 Revision D:2015 | DUMMY LOADS, ELECTRICAL, WAVEGUIDE, GENERAL SPECIFICATION FOR |
| GGG-P-831 Revision F:1995 | PUNCHES; CENTER, DRIVE PIN, ALIGNING, AND PRICK |
| AA-C-2929 Base Document:1997 | CASEWORK, METAL AND WOOD (MEDICAL AND DENTAL) |
| MIL E 917 : E | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE) |
| MIL-B-2678 Revision C:1989 | BRUSHES, WIRE, BOILER TUBE, EXPANDING TYPE FOR USE WITH ELECTRIC AND AIR MOTOR DRIVEN BOILER TUBE CLEANING OUTFITS, AND FIXED SECTIONAL HAND TYPE |
| GGG-S-735 Revision B:1976 | STAMPING AND MARKING EQUIPMENT; GENERAL SPECIFICATION FOR |
| MIL C 49142/12 : B | CONNECTORS, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY, (SERIES TRT (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2) |
| MIL-W-80119 Revision B:1971 | WELDING SYSTEMS, ELECTRON BEAM, VACUUM TYPE, COMPUTER NUMERICALLY CONTROLLED (CNC) |
| MIL-T-28690 Base Document:1991 | TRUCK, FIREFIGHTING, STRUCTURAL, 1000 GPM, 4 BY 2 WITH 50 FOOT TELESCOPING BOOM ESCAPE LADDER AND WATER TOWER |
| MIL-C-38404 Revision E:1992 | COUPLING, HOSE, REATTACHABLE SCREW-ON |
| MIL V 16271 : F | VALVE, TANK FLOAT, ANGLE AND GLOBE PATTERN |
| MIL PRF 39030 : C | DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR |
| WW-C-621 Revision G:1990 | COUPLING ASSEMBLY, HOSE (FIRE, WOVEN-JACKETED, RUBBER OR FABRIC-LINED AND UNLINED) |
| WW-P-521 Revision G:1977 | PIPE FITTINGS, FLANGE FITTINGS, AND FLANGES, STEEL AND MALLEABLE IRON (THREADED AND BUTT WELDING) CLASS 150 |
| MIL-A-28745 Revision A:1970 | ANTENNA ASSEMBLY, OMNIDIRECTIONAL, LIGHT WEIGHT |
| MIL-A-22055 Base Document:1962 | AMPLIFIER MARK 140 MODS 0, 1, AND 2 |
| MIL-F-22839 Revision D:1988 | FURNITURE, MODULAR TYPE, STEEL, FIELD OFFICE |
| GGG-C-95 Revision A:1987 | CALIPERS, GENERAL PURPOSE |
| GGG-S-69 Revision D:1983 | SAW, POWER HACK, DRY CUT, PORTABLE (3-INCH CAPACITY) |
| FF-T-305 Revision C:1974 | THUMBSCREW |
| GGG-N-398 Revision A:1963 | NUT RUNNER, PNEUMATIC, PORTABLE |
| MIL V 12126 : E | VALVE, GATE, BRONZE, LEVER OPERATED, QUICK OPENING, 125 PSI AND 150 PSI |
| F-T-2907 Revision A:2006 | TANKS, POTABLE HOT WATER STORAGE |
| MIL-DTL-32234 Base Document:2007 | CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR |
| MIL-G-80236 Base Document:1972 | GENERATOR, AMMONIA DISSOCIATED ATMOSPHERE |
| MIL-DTL-27166 Revision F:2013 | VALVE, PRESSURE EQUALIZING, GASEOUS PRODUCTS |
| MIL D 39030 : B | DUMMY LOAD, ELECTRICAL, COAXIAL AND STRIPLINE |
| MIL-DTL-26126 Revision C:2002 | RELAYS, ELECTRICAL, OVERVOLTAGE, DC, GENERAL SPECIFICATION FOR |
| MIL-B-9925 Revision D:1988 | BORING MACHINES, JIB, VERTICAL, SINGLE COLUMN AND DOUBLE COLUMN BRIDGE TYPES, MANUAL AND POWER FEED |
| MIL-B-24220 Revision A:1990 | BLOCKS, TACKLE, SYNTHETIC ROPE |
| MIL-P-80104 Revision D:1990 | PRESSES, SWAGING, WIRE ROPE FITTING, HYDRAULIC POWERED, ELECTRIC MOTOR DRIVEN |
| MIL-DTL-3655-15 Revision B:1999 | Connector, Plug, Electrical, Class I (Coaxial, Series Twin, TWBNC) |
| MIL-DTL-32373 Base Document:2011 | Plug, Machine Thread, Magnetic: Drain |
| MIL E 82463 : 0 | EXERCISE HEAD MARK 78 MOD 2 |
| MIL-M-80255 Revision B:1990 | MACHINING CENTERS, VERTICAL, SINGLE SPINDLE, COMPUTER NUMERICAL CONTROL (CNC) |
| MIL-DTL-6807 Revision F:2012 | Switches, Rotary, Selector Power, General Specification for |
| MIL S 3928 : D | SWITCH, (COAXIAL) RADIO FREQUENCY TRANSMISSION LINE, GENERAL SPECIFICATION FOR |
| MIL-PRF-64266 Revision B:2016 | CONNECTORS, FIBER OPTIC, CIRCULAR AND RECTANGULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, ENVIRONMENT RESISTING GENERAL SPECIFICATION FOR |
| MIL-B-45993 Revision A:1989 | BEAD BREAKER, PNEUMATIC TIRE, PORTABLE AIR OR AIR OVER HYDRAULIC OPERATED |
| MIL C 19836 : B | COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD |
| A-A-51135 Revision A:1986 | HOLE SAWS, HOLE SAW ARBORS, AND HOLE SAW DRIVE PLATES |
| GG-I-271 Revision C:1964 | IGNITER, FRICTION, OXYACETYLENE-TORCH |
| MIL-DTL-15291 Revision G:2013 | SWITCHES, ROTARY, SNAP ACTION AND DETENT/SPRING RETURN ACTION, GENERAL SPECIFICATION FOR |
| MIL-L-28796 Base Document:1973 | LINE ASSEMBLIES, RADIO FREQUENCY TRANSMISSION GENERAL SPECIFICATION FOR |
| MIL-B-29186 Base Document:1978 | BARRIER SYSTEM: FLOATING, OIL AND DEBRIS CONTAINMENT (FOR PERMANENT INSTALLATION) |
| MIL V 17547 : A | VALVES, CHECK, BRONZE (NAVY) |
| MIL L 14465 : C | LIGHTS, COMPOSITE, VEHICULAR (METRIC) |
| MIL C 25516 : D | CONNECTOR, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
| MIL-W-80046 Revision D:1990 | WELDING MACHINES, RESISTANCE, STORED ENERGY, CAPACITOR DISCHARGE, DUAL RANGE |
| MIL-DTL-19772 Revision C:2017 | VALVES, TEMPERATURE REGULATING, AUTOMATIC, NAVAL SHIPBOARD |
| MIL S 13625 : D | SWITCH, PULL, SWITCH, PUSH, SWITCH, BEAM SELECTING, HEADLIGHT, ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES) |
| MIL-DTL-55116 Revision D:2013 | CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR |
| MIL-F-80233 Revision B:1985 | FURNACES, VACUUM, HEAT TREATING INTEGRAL QUENCH |
| OO-J-571 Revision F:2015 | JOINTERS, WOODWORKING |
| MIL-S-3788 Revision G:1991 | SHAPER, WOODWORKING |
| MIL-PRF-39012-79 Revision G:2008 | CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED) PIN CONTACT, CLASS 2, SEMIRIGID CABLE |
| MIL-A-22336 Revision B:1979 | AMPLIFIER, SYNCHRO SERVO, 6 WATT, 6O HZ |
| MIL-PRF-39012-69 Revision C:2011 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMB (CABLED, SOCKET CONTACT, RIGHT ANGLE, CLASS 2) |
| MIL I 85581 : 0 | INTERVALOMETER, ROCKET LAUNCHER, REUSABLE |
| MIL-DTL-55181 Revision F:2012 | CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR |
| MIL-C-52973 Revision A:1987 | COMPRESSOR UNIT, 20 CFM, 5000 PSI, DIESEL-ENGINE-DRIVEN DIVING AIR |
| MIL-L-51050 Revision B:1971 | LABORATORY, PETROLEUM,SEMITRAILER MOUNTED |
| MIL S 22710 : E | SWITCHES, ROTARY (PRINTED CIRCUIT), (THUMBWHEEL, INLINE, AND PUSHBUTTON), GENERAL SPECIFICATION FOR |
| MIL-V-2961 Revision D:1990 | VALVES, GLOBE, PRESSURE REDUCING, GAS SERVICE |
| MIL-A-45016 Revision C:1985 | ALIGNMENT SERVICE UNIT MOTOR VEHICLE WITH FRAME STRAIGHTENING AND ALIGNMENT CAPABILITIES |
| MIL-PRF-83446 Revision D:2015 | COILS, RADIO-FREQUENCY, CHIP, FIXED OR VARIABLE, GENERAL SPECIFICATION FOR |
| MIL-T-24649 Revision A:1994 | TELEPHONE, HARDWARE, SOUND POWERED GENERAL SPECIFICATION FOR |
| MIL-DTL-12520 Revision D:2005 | Connectors, Plug and Receptacle (Electrical, Waterproof), and Accessories; General Specification for |
| KKK-C-650 Revision E:1985 | CREEPER, MECHANIC'S |
| MIL-B-24692 Revision A:1993 | BREATHING APPARATUS, OXYGEN GENERATING, TYPE A-4 (METRIC) |
| MIL-E-18435 Revision C:1980 | EXHAUST HEAD, PIPE |
| GGG-S-00275 Base Document:1965 | SHEARS, BARBERS |
| MIL-B-23071:C | Blowers, Miniature, for Cooling Electronic Equipment General Specification for<br> |
| MIL F 1183 : J | FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING, GENERAL SPECIFICATION FOR |
| XP PREN 3660-003 : 1994 XP | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 003: GROMMET NUT, TYPE A, 003 - PRODUCT STANDARD |
| DOD-M-24672 Base Document:1986 | MOLDS, AND MOLD HEATING PLATEN FOR MOLDING ELECTRICAL CONNECTORS AND CABLES (METRIC) |
| MIL R 28750 : C SUPP 1 | RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING |
| MIL-B-18855 Revision D:1969 | BATTERY MK 53 MOD O SECONDARY TYPE, SILVER-ZINC-ALKALI |
| MIL D 28803 : A | DISPLAY, OPTOELECTRONIC, READOUTS, BACK LIGHTED SEGMENTED, GENERAL SPECIFICATION FOR |
| MIL R 18152 : A | ROD, STABILIZING, COATED |
| DOD-B-15072 Revision E:1981 | BATTERIES, STORAGE, LEAD-ACID, PORTABLE |
| MIL-DTL-2 Revision G:2006 | VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR |
| MIL-V-2042 Revision E:1990 | VALVE, REDUCING, WATER SERVICE, FOR NAVAL SHIPBOARD USE |
| GG-A-440 Revision C:1981 | ALIDADE, SURVEYING, TELESCOPE |
| MIL I 10986 : F | INDICATORS AND TRANSMITTERS, LIQUID, TEMPERATURE AND PRESSURE |
| MIL-C-45854 Revision B:1973 | CHASER, THREAD, HAND, (THREAD COMB) |
| GGG-S-793 Revision A:1964 | STRIPPER, WIRE, BENCH |
| MIL-A-18977 Revision D:1971 | AMPLIFIER CHANNEL (FOR TORPEDO MARK 37 MODS 0, 2, AND 3) |
| MIL S 0081619 : C | SWITCH, SOLID STATE TRANSDUCER, (ANALOG AND DIGITAL) GENERAL SPECIFICATION FOR |
| DOD V 24657 : 0 | VALVE, ACTUATOR, DIRECT COUPLED, GEAR DRIVEN ELECTRICALLY POWERED FOR NAVAL SHIPBOARD PROPULSION AND AUXILIARY SYSTEMS (METRIC) |
| MIL-L-52918 Base Document:1977 | LEVELS, SURVEYING, SELF LEVELLING AND TILTING |
| MIL-DTL-3655-14 Revision B:1999 | Connector, Plug, Electrical, Class I (Coaxial, Series Twin, TWTNC) |
| MIL-L-23251 Revision E:1989 | LATHES, ENGINE AND TOOLROOM 2516 AND 3220 |
| MIL-C-85248 Revision A:1984 | CAMERA, STILL PICTURE, PANORAMIC, KA-99A |
| MIL-DTL-12883 Revision F:2003 | Sockets and Accessories for Plug-in Electronic Components, General Specification for |
| MIL C 23687 : 0 | CASE, EXPLOSIVE DESTRUCTOR MARK 18 MOD O |
| MIL-B-24141 Revision A:1990 | BLOCKS, TACKLE, WIRE ROPE |
| GGG-S-51 Revision E:1995 | SAW, CIRCULAR, PORTABLE, ELECTRIC |
| MIL-PRF-39012-140 Revision A:2007 | Connector, Plug, Electrical, Series SSMA, Pin Contact, Right Angle, for Flexible Cable, Class 2 |
| MIL-PRF-23256 Revision C:1998 | VALVE ASSEMBLY, SEAL |
| MIL-W-80183 Revision C:1984 | WELDING MACHINE, ELECTRICAL RESISTANCE, ROLL SPOT, AND SEAM, PRESS TYPE, THREE PHASE |
| IFI 301 : 2008 | GAGE CALIBRATION REQUIREMENTS AND PROCEDURES FOR THREAD GAGES |
| A-A-55537 Revision A:2013 | Nozzle, Oil Burner, Pressure Atomizing |
| GGG-S-656 Revision E:1996 | SQUARES, CARPENTERS, DIEMAKERS, AND MACHINISTS |
| MIL S 19500/168 : C NOTICE 1 | SEMICONDUCTOR DEVICE, THYRISTORS (CONTROLLED RECTIFIERS), SILICON TYPES 2N1771A,2N1772A,2N1774A,2N1776A,2N1777A,TX2N1771A, TX2N1772A,TX2N1774A,TX2N1776A,TX2N1777A |
| MIL A 18001 : K | ANODES, SACRIFICIAL ZINC ALLOY |
| MIL-PRF-80034 Revision D:2015 | SAWS, JIG, WOODWORKING |
| MIL-PRF-49142-12 Revision D:2005 | CONNECTORS, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY, (SERIES TRT (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2) |
| MIL C 39014 : E | CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE) ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-G-17586 Base Document:1953 | GAGE KIT, ELECTRICAL, FOR BARE AND RIFLING OF 20MM9 GROOVE GUN BARRELS |
| MIL-PRF-19500 Revision P:2010 | SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
| MIL-PRF-87108 Revision B:1998 | INFLATION DEVICE, FLU-2A/P |
| MIL-C-24174 Revision A:1987 | CONTROL, NAVIGATION LIGHTS, GENERAL SPECIFICATION FOR |
| MIL S 55041 : C | SWITCH, WAVEGUIDE GENERAL SPECIFICATION FOR |
| MIL-PRF-39012-26 Revision H:2010 | Connectors, Plugs, Electrical, Coaxial Radio Frequency, (Series TNC (Cabled), Pin Contact, Class 2) |
| MIL-PRF-39012-40 Revision J:2011 | CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SC (CABLED), SOCKET CONTACT, JAM NUT, REAR MOUNTED, CLASS 2) |
| MIL-PRF-39012-75 Revision C:2011 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMC (CABLED, SOCKET CONTACT, RIGHT ANGLE, CLASS 2) |
| MIL-PRF-39019 Revision F:2010 | CIRCUIT BREAKERS, MAGNETIC, LOW-POWER SEALED, TRIP-FREE, GENERAL SPECIFICATION FOR |
| MIL-B-21418 Base Document:1958 | BELTING SYSTEM, AMMUNITION, MARK 2 MOD O (FOR 2O MM MARK 1OO SERIES AMMUNITION) |
| MIL-PRF-82537 Revision A:1988 | CASE, CARTRIDGE, STEEL, SPIRAL-WRAPPED 40 MILLIMETER (MM) AM LARGER CAMBERS, GENERAL SPECIFICATION FOR |
| MIL-PRF-39012-137 Revision A:2007 | CONNECTORS, PLUG, ELECTRICAL, SERIES SSMA, RIGHT ANGLE, PIN CONTACT, FOR SEMIRIGID CABLE, CLASS 2 |
| MIL-PRF-14409 Revision J:2014 | CAPACITORS, VARIABLE (PISTON TYPE, TUBULAR TRIMMER), GENERAL SPECIFICATION FOR |
| MIL-F-80082 Revision B:1986 | FURNACE, HEAT TREATING AND BRAZING, ELECTRIC, CONTROLLED ATMOSPHERE, PUSHER AND CONVEYOR BELT TYPES |
| MIL C 83526 : B | CONNECTOR, FIBER OPTIC, CIRCULAR, ENVIRONMENTAL RESISTANT, HERMAPHRODITIC, GENERAL SPECIFICATION FOR |
| FF-N-836 Revision E:1994 | Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat |
| MIL-M-24144 Revision D:1988 | Monitors, Frost-Point/Dew-Point, Compressed Air, Semi-Portable (Future Acquisitions for this item may Refer to ST000-AG-IDX-010) |
| GGG-K-450 Revision C:1998 | KNIFE, CRAFTSMAN'S, MULTIPURPOSE (STENCIL, ETCHING, AND CUTTING, REMOVABLE BLADES) |
| MIL C 39012/20 : G | CONNECTOR, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC, (CABLED) PIN CONTACT, RIGHT ANGLE, CLASS 2) |
| ANSI Z86.7.1 : 1987 | UNDERWATER SAFETY-LOW-PRESSURE HOSE ASSEMBLIES CONNECTING FIRST AND SECOND STAGES ON SCUBA DIVING REGULATORS-DESIGN AND MINIMUM PERFORMANCE REQUIREMENTS, |
| MS39230 Revision C:2015 | ELBOW, PIPE-STREET, 90 DEGREE (150 AND 300 LBS) |
| PREN 6047-001 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FOR HIGH CURRENT OPERATING TEMPERATURE +200 DEGREE C CONTINUOUS, AND FIRE RESISTANT - TECHNICAL SPECIFICATION |
| SAE AS 85049 : 2016 | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
| SAE AS 5363 : 2016 | ELECTROMECHANICAL POWER CONTROLLER/RELAY, GENERAL SPECIFICATION FOR |
| ASTM F 1565 : 2000 | Standard Specification for Pressure-Reducing Valves for Steam Service |
| SAE AIR 38 : 2015 | GUIDE FOR THE DESIGN OF THREADED SCREW OR STUD TYPE ELECTRICAL EQUIPMENT TERMINATIONS |
| ASTM F 1755M : 1996 : R2002 | Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric) |
| BS EN 2997-6:1997 | Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peak Hermetic jam-nut mounted receptacle. Product standard |
| MIL-DTL-39024 Revision C:2014 | JACK, TIP (TEST POINT, PANEL OR PRINTED WIRING TYPE), GENERAL SPECIFICATION FOR |
| MIL-DTL-32393 Base Document:2011 | COVER ASSEMBLY, TERMINAL BLOCK, TWO STUD |
| NASA STD 5020 : 2012 | REQUIREMENTS FOR THREADED FASTENING SYSTEMS IN SPACEFLIGHT HARDWARE |
| MIL-DTL-83413 Revision C:2012 | CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING, GENERAL SPECIFICATION FOR |
| NASA MSFC STD 486 : 1992 | STANDARD, THREADED FASTENERS, TORQUE LIMITS FOR |
| MIL-PRF-21480-12 Revision F:2012 | GENERATOR SYSTEM, 40 KVA, 400 HZ AC INTEGRALLY EXCITED, BRUSHLESS TYPE |
| IPC HDBK 630 : 0 | GUIDELINES FOR DESIGN, MANUFACTURE, INSPECTION AND TESTING OF ELECTRONIC ENCLOSURES ASSEMBLY |
| MIL S 19500/478 : F | SEMICONDUCTOR DEVICE, DIODE, SILICON, FAST RECOVERY, POWER RECTIFIER TYPES 1N5812, 1N5814, 1N5816 AND TYPES JAN, JANTX AND JANTXV |
| MIL-DTL-28840 Revision D:2013 | CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLASS D, GENERAL SPECIFICATION FOR |
| MIL-DTL-55302 Revision G:2009 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES |
| MIL F 24787 : 0 | FITTINGS, END, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES GENERAL SPECIFICATION FOR |
| MIL-DTL-71172 Revision B:2005 | CYLINDER, RECUPERATOR, RECOIL, M119A1/A2 HOWITZER LIGHT, TOWED: 105 MM |
| MIL-V-24619 Base Document:1983 | VALVE, QUICK CLOSING, FOR SATURATED STEAM SERVICE |
| MIL-R-19309 Revision D:2003 | RELAY, SENSITIVE (FOR TORPEDO MARK 37 MOD 2) |
| GGG-L-795 Revision E:1990 | LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING |
| MIL S 12883 : D | SOCKET AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS GENERAL SPECIFICATION FOR |
| MIL-DTL-901 Revision E:2017 | Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for |
| MIL-PRF-39012-39 Revision H:2011 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SC (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2) |
| MIL-DTL-12211 Revision G:2009 | Switch, Pressure |
| MIL-PRF-19978 Revision L:2016 | Capacitor, Fixed, Plastic (or Paper-Plastic) Dielectric (Hermetically Sealed in Metal, Ceramic or Glass Cases), Established and Non-Established Reliability, General Specification for |
| MIL-DTL-28803 Revision C:2013 | DISPLAY, OPTOELECTRONIC, SEGMENTED READOUTS, BACKLIGHTED, GENERAL SPECIFICATION FOR |
| MS35118 Revision E:2013 | Connector, Receptacle, Series SM, UG-695/U |
| MS35123 Revision C:2005 | RECEPTACLE, CONNECTOR (TYPE SM) UG-700/U |
| MIL-PRF-39012-57 Revision H:2011 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES SMA (CABLED) - SOCKET CONTACT, CLASS 2) |
| MIL-V-24336 Revision A:1988 | Valves, Pressure Reducing, For Oxygen Service |
| MIL-DTL-17376 Revision F:2007 | Caps and Flanges, Compressed-Gas Cylinder, General Specification for |
| MSS SP 89 : 2003 | PIPE HANGERS AND SUPPORTS - FABRICATION AND INSTALLATION PRACTICES |
| MIL-C-11198 Revision K:1984 | CHEST, ICE STORAGE |
| MIL-I-85889 Base Document:1988 | IGNITER, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| GGG-C-406 Revision D:1975 | CLAMP AND HAND SCREWS |
| MIL V 24488 : A | VALVE, THREE WAY, MIXING, CHILLED WATER, QUIET DESIGN |
| MIL-PRF-39012-77 Revision B:2011 | CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMC (UNCABLED, MALE, JAMNUT MOUNTED, CLASS 2) |
| MIL-V-5027 Revision D:1968 | VALVES, CHECK, OXYGEN, HIGH PRESSURE |
| GGG-V-415 Revision A:1967 | VISE, PIPE |
| BS 6121-2:1989 | Mechanical cable glands Specification for polymeric glands |
| MIL F 52525 : D | FITTING, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP HALVES, GENERAL SPECIFICATION FOR |
| GGG-H-33 Revision B:1996 | HAMMER, HAND AND MALLET, SURFACE, PROTECTIVE, HOLDER AND ADAPTER, INSERTED HAMMER FACE, AND FACES, HAMMER, INSERTED |
| MIL-PRF-39012-38 Revision J:2011 | CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SC (CABLED), SOCKET CONTACT, FLANGE MOUNTED, REAR MOUNTED, CLASS 2) |
| GGG-C-00835 Revision B:1970 | CUTTER, STEEL STRAPPING |
| GGG-T-60 Revision A:1970 | TAPS, THREAD CUTTING (CARBON STEEL, HAND, CUT THREAD, UNIFIED, AMERICAN AND METRIC THREAD FORM, SCREW AND BOLT) |
| MIL-F-21346 Revision B:1976 | FUSEHOLDERS, BLOCK, AND SHROUD TYPE, AND ASSOCIATED FUSE CLIPS; GENERAL SPECIFICATION FOR |
| KKK-T-683 Revision F:2010 | TRUCKS, HAND, TWO-WHEELED |
| MIL-W-80227 Revision A:1990 | WELDING MACHINE, ULTRASONIC, SPOT |
| MIL-W-80211 Revision C:1990 | WELDING MACHINE, (MICROWELDER), RESISTANCE, STORED ENERGY, CONSTANT VOLTAGE, LOW IMPEDANCE SOURCE, BENCH MOUNTED |
| ANSI Z86.7.2 : 1987 | UNDERWATER SAFETY-HIGH-PRESSURE HOSE ASSEMBLIES ON SUBMERSIBLE PRESSURE GAGES FOR SCUBA DIVING-DESIGN AND MINIMUM PERFORMANCE REQUIREMENTS, |
| MIL-DTL-3655-16 Revision B:1999 | Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin, TWBNC) |
| MIL H 17505 : E | HOSE AND HOSE ASSEMBLY, RUBBER, OIL AND GASOLINE, SUCTION AND DISCHARGE |
| MIL C 11693 : C | CAPACITOR, FEED THROUGH, RADIO INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METALLIC CASE), STYLE CZ20 |
| MIL-PRF-49142-3 Revision G:2016 | CONNECTOR, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY (SERIES TRB, PIN CONTACT, CLASS 2) |
| MIL-PRF-49142-9 Revision D:2005 | CONNECTOR, TRIAXIAL, RADIO FREQUENCY, (SERIES TRT (CABLED) RECEPTACLE, SOCKET CONTACT, JAMNUT MOUNTED, CLASS 2) |
| MIL-DTL-55074 Revision G:2013 | Connectors, Plug and Receptacle, Telephone, Electrical, Subassembly and Accessories and Contact Assembly, Electrical, General Specification for |
| MIL-PRF-49142-6 Revision E:2005 | CONNECTOR, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY (SERIES TRB (CABLED), SOCKET CONTACT, CLASS 2) |
| MIL-A-23282 Revision B:1965 | ACTUATOR |
| MIL-DTL-9177 Revision C:2014 | CONNECTOR, AUDIO, AIRBORNE, GENERAL SPECIFICATION FOR |
| MIL-C-1258 Revision D:1983 | CUP, OIL, LUBRICATING AND OILERS, SELF-FEEDING |
| MIL S 19500/211 : B NOTICE 2 | SEMICONDUCTOR DEVICE, DIODE, SILICON, POWER RECTIFIER, TYPES 1N3164, 1N3168, 1N3170, 1N3172, 1N3174, 1N3175, 1N3176, 1N3177 & R TYPES JAN, JANTX & JANTXV |
| MIL-M-83524 Base Document:1985 | MICROSCOPE, OPTICAL, MONOCULAR, HAND-HELD, PORTABLE, MILITARIZED, 200X MAGNIFICATION, FOR FIELD INSPECTION OF OPTICAL FIBERS |
| MIL-PRF-55339-55 Base Document:2004 | Adapter, Connectors, Electrical, Coaxial, Radio Frequency, Series SMA, Connector Saver |
| MIL-PRF-39012-81 Revision G:2007 | CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED, SEMIRIGID) - SOCKET CONTACT, CLASS 2 |
| GGG-S-283 Revision A:1967 | SHEARS, METAL CUTTING, PNEUMATIC (PORTABLE) |
| MIL C 12520 : C | CONNECTOR, PLUG AND RECEPTACLE (ELECTRICAL, WATERPROOF), AND ACCESSORIES: GENERAL SPECIFICATION FOR |
| MIL B 17896 : C | |
| MIL-PRF-39012-73 Revision C:2011 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMC (CABLED, SOCKET CONTACT, CLASS 2) |
| MIL F 15733 : G | FILTERS & CAPACITORS, RADIO FREQUENCY INTERFERENCE |
| MIL-R-28894 Base Document:1986 | RELAY, HYBRID OR SOLID STATE, SENSORS, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MS16051 Revision G:2014 | COUPLING, GROUND COOLING, COMBAT TYPE AIRCRAFT |
| MIL-N-3336 Revision A:1964 | NUT, SHEET SPRING, INSTRUMENT MOUNTING |
| DOD-B-24541 Revision A:1982 | BATTERY CELLS AND ELEMENTS, LEAD-ACID, MAIN STORAGE, SUBMARINE; GENERAL SPECIFICATION FOR (METRIC) |
| MIL-C-11569 Revision D:1979 | CLAMPS, HOSE, WATER, UNIVERSAL 3/8- TO 1-INCH AND 1- TO 3-INCH |
| GGG-J-60 Revision A:1967 | JACK KIT, HYDRAULIC, HAND (WITH TRUCK OR CHEST) |
| MIL T 55069 : C NOTICE 1 | TRAINING AID, MODEL BRIDGE, FLOATING ALUMINUM, HIGHWAY TYPE, DECK BALK SUPERSTRUCTURE ON PNEUMATIC FLOATS |
| MIL-C-10950 Revision C:1968 | CAPACITOR, FIXED, MICA DIELECTRIC, BUTTON STYLE, GENERAL SPECIFICATION FOR |
| MIL L 3661 : B | LAMPHOLDER, INDICATOR LIGHTS, INDICATOR LIGHT HOUSINGS AND INDICATOR LIGHT LENSES GENERAL SPECIFICATION FOR |
| MIL-PRF-39012-139 Revision A:2007 | CONNECTOR, PLUG, ELECTRICAL, SERIES SSMA, PIN CONTACT, FOR FLEXIBLE CABLE, CLASS 2 |
| MIL-PRF-39012-128 Revision C:2011 | CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC, SOLDER POCKET, SOCKET CONTACT JAM NUT MOUNTED, ISOLATED, CLASS 2) |
| MS17981 Revision D:2001 | SOLENOID, ELECTRICAL, HORN, 24 VOLT DC |
| NASA KSC F 124 : 1994 | SPECIFICATION FOR FITTINGS, FLARED TUBE |
| GGG-B-500 Revision D:2015 | BLOCK, TACKLE (WIRE ROPE) |
| MIL C 24788 : 0 | COUPLING ASSEMBLY, SEMI-DRY-BREAK QUICK-DISCONNECT, FUEL WITH OR WITHOUT CONTINUITY SWITCH |
| MS75021 Revision E:2013 | CONNECTOR, RECEPTACLE, ELECTRICAL, - 12 CONTACT, INTERVEHICULAR, 28 VOLT, WATERPROOF |
| MIL-DTL-32362 Base Document:2010 | LIGHT, MARKER, CLEARANCE-BLACK |
| MIL-PRF-39012-92 Revision D:2016 | CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED, CLASS 2, WITHOUT CONTACT, .141 SEMIRIGID CABLE) |
| MIL-PRF-49142-5 Revision F:2005 | CONNECTOR, RECEPTACLE, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY (SERIES TRB (CABLED), SOCKET CONTACT, JAM NUT MOUNTED, CLASS 2) |
| MIL-DTL-3655-23 Revision B:1999 | Connector, Receptacle, Electrical, Class I, (Coaxial, Series Twin, TWBNC, Bulkhead) |
| MIL-PRF-49142-7 Revision D:2005 | CONNECTOR, PLUG, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY, (SERIES TRB (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2) |
| MIL-B-4042 Revision E:1986 | BORESCOPE ASSEMBLIES, CYLINDER INSPECTION |
| MIL-G-17489 Revision B:1961 | GAGE, PRESSURE (AIR), BOILER |
| GG-M-2742 Base Document:1991 | METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 600 GPM |
| MIL-PRF-39012-28 Revision H:2010 | CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES TNC, (CABLED), SOCKET CONTACT, JAM NUT MOUNTED, CLASS 2) |
| MIL-K-83525 Base Document:1985 | KIT, PORTABLE OPTICAL MICROSCOPE, MILITARIZED, 200X MAGNIFICATION FOR FIELD INSPECTION OF OPTICAL FIBERS |
| MIL-P-23108 Base Document:1961 | PLUG IN UNIT FOR TEST SET, ECHO SIMULATOR (U) |
| MIL-C-11015 Revision F:2008 | CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), GENERAL SPECIFICATION FOR |
| MIL-C-24224 Revision B:1985 | CARTRIDGE, GAS PRESSURE, FOR PRESSURIZING DRY CHEMICAL FIRE EXTINGUISHERS |
| MIL-PRF-39012-82 Revision G:2007 | CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED, SEMIRIGID), FLANGE MOUNTED - SOCKET CONTACT, CLASS 2 |
| MIL-I-24739 Revision A:1991 | INFLATION ASSEMBLY, AUTOMATIC MANUAL, LIFE PRESERVER |
| MIL-DTL-1183 Revision K:2016 | FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING, GENERAL SPECIFICATION FOR |
| GG-T-621 Revision C:1985 | TRANSIT, ONE-MINUTE; AND TRANSIT TRIPODS |
| MIL-P-55149 Revision B:1988 | POST, BINDING, ELECTRICAL (INSULATED AND UNINSULATED) GENERAL SPECIFICATION FOR |
| MIL-W-80121 Revision B:1987 | WELDING MACHINE, ELECTRICAL RESISTANCE SPOT, PORTABLE TYPE, SINGLE PHASE |
| GGG-P-840 Revision B:1994 | PUNCHES AND DIES, AND PUNCH AND DIE SETS: METAL CUTTING, HAND; AND PUNCH, CLIP, SHEET METAL |
| MIL-R-81158 Revision A:1966 | REAR COVER ASSEMBLED UNIT (FOR TORPEDO MARK 37 MODS O AND 1) |
| MIL-W-7973 Revision F:1986 | WELDING MACHINE, ELECTRICAL RESISTANCE, SPOT, PRESS TYPE, THREE PHASE |
| MIL-W-21993 Revision B:1977 | WIRE ROPE ASSEMBLY, MOORING, MARK 1 MOD 1 |
| GGG-C-430 Revision A:1967 | CLEANER, VALVE STEM GUIDE |
| ASTM F 1755M : 1996 : R2012 : EDT 1 | Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric] |
| MIL A 002550 : C | AMMUNITION, GENERAL SPECIFICATION FOR |
| MIL C 82537 : A | CASE, CARTRIDGE, STEEL, SPIRAL WRAPPED 40 MILLIMETER (MM) AND LARGER CALIBERS, GENERAL SPECIFICATION FOR |
| H-B-771 Revision B:1966 | BRUSHES, WIRE, ROTARY, GENERAL PURPOSE |
| MIL S 52028 : C | SWITCH, VEHICULAR IGNITION: WATERPROOF, STARTER AND MAGNETO, WITH DEGASSER CONTROL |
| GGG-S-278 Revision B:1994 | SHEARS AND SCISSORS |
| MIL-E-24759 Base Document:1991 | REDUCTOR ASSEMBLY IN-LINE, 90 GALLONS PER MINUTE, PORTABLE AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE |
| MIL-F-28675 Revision B:1985 | FITTINGS, CONDUIT, EXPLOSION PROOF (COUPLINGS, SEALS, UNIONS, ELBOWS) |
| MIL-B-17089 Revision A:1957 | BAROMETER, ANEROID ML-448()UM |
| GGG C 00748 : C | CUTTER, CIRCLE (ADJUSTABLE); FOR GASKETS AND WASHERS |
| MIL-G-81168 Base Document:1964 | GYROSCOPE, RATE INTEGRATING |
| F-C-2916 Base Document:1997 | CAPS, VENT, FUEL STORAGE TANK |
| MIL-C-81003 Base Document:1964 | CLINOMETER, ELEVATION ML-591/U |
| MIL-B-26994 Revision E:1992 | BALANCER, VEHICLE WHEEL, ON-VEHICLE TYPE |
| MIL-M-80016 Revision C:1988 | MILLING MACHINE, VERTICAL, SWIVEL HEAD, KNEE AND COLUMN, RAM AND TURRET TYPE |
| MIL-PRF-15305 Revision F:2013 | COILS, ELECTRICAL, FIXED AND VARIABLE, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| MIL R 26126 : B | RELAY, ELECTRICAL, OVERVOLTAGE DC, GENERAL SPECIFICATION FOR |
| MIL-DTL-17902 Revision G:2013 | HOSE, END FITTINGS AND HOSE ASSEMBLIES, SYNTHETIC RUBBER, AIRCRAFT FUELS |
| MIL-DTL-24558 Revision B:2011 | TERMINAL BOXES, CONNECTION, FOR ELECTRICAL AND ELECTRONIC SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-B-45081 Revision E:1991 | BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR |
| MIL-PRF-49142 Revision B:2004 | CONNECTOR, TRIAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| MS39231 Revision C:2015 | ELBOW, PIPE STREET, 45 DEGREE, (150 & 300 POUNDS) |
| MIL-PRF-39012-8 Revision E:2015 | CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES C (CABLED), FEMALE, FLANGE MOUNTED, REAR MOUNTED, CLASS 2) |
| MIL-PRF-19 Revision E:2007 | RESISTOR, VARIABLE, WIREWOUND (LOW OPERATING TEMPERATURE), GENERAL SPECIFICATION FOR |
| DOD-B-24200 Revision B:1978 | BATTERY CELLS AND ELEMENTS, LEAD-ACID, LEAD-ANTIMONY, MAIN STORAGE, SUBMARINE; GENERAL SPECIFICATION FOR (METRIC) |
| MIL-PRF-39012-30 Revision H:2010 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL RADIO FREQUENCY, (SERIES TNC (CABLED), PIN CONTACT, RIGHT ANGLE, CLASS 2) |
| MIL-PRF-39012-11 Revision D:1987 | CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES C, (CABLED), FEMALE, JAM NUT, REAR MOUNTED, PRESSURIZED, CLASS 2) |
| MIL-PRF-28750 Revision J:2017 | RELAYS, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL-S-5944 Revision C:1990 | SLING, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-A-17204 Revision D:1982 | ADAPTERS, STRAIGHT OR REDUCING, PIPE THREAD TO HOSE THREAD |
| MIL-P-17098 Revision A:1952 | PSYCHROMETER, HAND, ELECTRIC, ASPIRATING, M1-450/UM AND CARRYING CASE, PSYCHROMETER, CY-1238/UM |
| MIL-M-28519 Revision A:1984 | METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 6OO GPM |
| MIL-F-13926 Revision B:1984 | FIRE CONTROL MATERIAL MANUFACTURE AND INSPECTION, GENERAL SPECIFICATION FOR |
| MIL-R-83520 Base Document:1983 | RELAYS, ELECTROMECHANICAL, GENERAL PURPOSE, NON-HERMETICALLY SEALED, PLASTIC ENCLOSURE (UST COVER) |
| MIL I 23145 : B | INFLATION ASSEMBLIES, LIFE PRESERVER |
| MIL-P-52405 Revision C:1990 | PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN (FOR WATER) |
| MIL-B-45548 Revision D:1988 | BEAD BREAKER, PNEUMATIC TIRE, PORTABLE (TIRE SIZES 14.00-24 THROUGH 37.5-33) |
| MIL I 83287 : E | INDICATOR, FAULT LOCATING GENERAL SPECIFICATION FOR |
| GGG-P-441 Revision A:1965 | PLATES, ANGLE, ADJUSTABLE AND SOLID |
| MIL M 2082 : C | METERS, FLOW, MECHANICAL, VOLUMETRIC POSITIVE DISPLACEMENT, LIQUID, COLD WATER AND HOT WATER TYPE, NAVAL SHIPBOARD USE |
| MIL-DTL-3655-22 Revision B:1999 | Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin, TWTNC, Bulkhead) |
| MIL-PRF-39023 Revision D:2006 | RESISTOR, VARIABLE, NONWIREWOUND, PRECISION, GENERAL SPECIFICATION FOR |
| MIL-PRF-11693 Revision E:2012 | CAPACITOR, FEED THROUGH, RADIO-INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METAL CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL-PRF-19500-380 Revision C:2014 | TRANSISTOR, NPN, SILICON, POWER, FOR POWER-SWITCHING APPLICATIONS, STUD MOUNTED CASE, TYPES 2N4865, 2N5250, AND 2N5251, QUALITY LEVELS JANTX, JANTXV, AND JANS |
| MIL-S-24700 Base Document:1988 | STUFFING TUBES FOR REFERENCE ELECTRODES, IMPRESSED CURRENT CATHODIC PROTECTION (METRIC) |
| GGG-S-630 Revision D:1986 | SPREADERS, TIRE, PNEUMATICALLY OPERATED |
| MIL-B-14563 Revision C:1983 | BOOTH, SPRAYING, DRY (BENCH TYPE WITH LEGS) |
| MIL-S-3644 Revision B:1985 | SHAFT ASSEMBLY, FLEXIBLE |
| GGG-C-800 Revision B:1964 | CUTTER, WIRE ROPE, HAND OPERATED |
| MIL-DTL-3655-13 Revision B:1999 | Connector, Receptacle, Electrical, Class I (Coaxial, Series Twin, TWTNC, Jam Nut Mounted) |
| GGG-R-00395 Base Document:1966 | RIVETER, BLIND, HAND AND HEADS |
| MIL-W-80192 Revision C:1989 | WELDING MACHINE, RESISTANCE, SPOT AND SEAM, METAL FOIL, SINGLE PHASE, PORTABLE |
| GGG-T-80 Revision A:1970 | TAPS, THREAD CUTTING, CARBON STEEL HAND, CUT THREAD, AMERICAN STANDARD TAPER PIPE THREADS |
| GGG-N-1907 Base Document:1975 | NUTRUNNER AND SCREWDRIVER, PNEUMATIC |
| MIL C 83446 : B | COIL, RADIO FREQUENCY, CHIP, FIXED OR VARIABLE, GENERAL SPECIFICATION FOR |
| MIL-L-23400 Revision E:1986 | LATHES, ENGINE AND TOOL ROOM, 16, 20 AND 25 INCH 7-1/2 TO 15 HP |
| GGG-W-680 Revision A:1964 | WRENCHES, TAP AND REAMER, ADJUSTABLE |
| MIL-DTL-45918 Revision A:2009 | CLEVISES AND CONNECTORS (ROD END) |
| MIL-DTL-3933-16 Revision E:2011 | ATTENUATORS, FIXED, SPACE LEVEL, NON SPACE LEVEL COAXIAL LINE (SMA CONNECTORS), FREQUENCY RANGE: DC TO 18 GHZ, CLASS 4, LOW |
| MIL-PRF-31031-44 Base Document:2008 | Connector, Electrical, Receptacle, Radio Frequency, High Reliability, Coaxial, Series BMZ, Pin Contact, for Semirigid Cable |
| MS27152 Revision C:2011 | SWITCH, PRESSURE-WARNING, LOW AIR PRESSURE, 60 PSI, SPST, WATERPROOF |
| MIL S 19500/412 : A | SEMICONDUCTOR DEVICE, TRANSISTOR, NPN, SILICON, POWER TYPES 2N3846, 2N3847, JANTX, JANTXV AND JANS |
| MIL-DTL-29210 Revision E:2009 | HOSE ASSEMBLY, RUBBER, METAL LINED, WIRE REINFORCED, 250 PSIG, SATURATED STEAM SERVICE |
| MIL-DTL-27599 Revision E:2016 | CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTANT, SOLDER CONTACTS, GENERAL SPECIFICATION FOR |
| MIL-L-23249 Revision D:1984 | LATHES, ENGINE AND TOOL ROOM 13 THRU 17 INCH |
| GGG-V-412 Revision B:1994 | VISE: HAND; PIN; WIRE ROPE SPLICING; AND SQUARE END SAWING, TUBE |
| MIL-PRF-8622 Revision C:1997 | VALVE, HIGH-PRESSURE OXYGEN CYLINDER, AUTOMATIC OPENING |
| MIL-O-81151 Revision A:1970 | OSCILLATOR SUBASSEMBLY (NAVORD DWG 1563736)(FOR TORPEDO MARK 37 MODS O, 2, AND 3) |
| MIL-PRF-49142-11 Revision D:2005 | CONNECTORS, TRIAXIAL, RADIO FREQUENCY, (SERIES TRT (CABLED) RECEPTACLE, SOCKET CONTACT, CLASS 2) |
| MIL L 12632 : D | LOUDSPEAKER, PERMANENT MAGNET (ENCASED, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), GENERAL SPECIFICATION FOR |
| MIL-DTL-13625-1 Revision C:2017 | SWITCHES, PULL; SWITCHES, PUSH; SWITCHES, BEAM SELECTING, HEADLIGHT: ELECTRICAL (28 VOLTS DC MAXIMUM, FOR MILITARY VEHICLES) |
| MIL-A-81327 Revision A:1985 | ACOUSTIC LOCATING DEVICE (FOR TORPEDO MK 46 MOD O) |
| MIL R 17604 : C NOTICE 1 | RECORDING EQUIPMENT, CARBON DIOXIDE, AUTOMATIC |
| GGG-G-17 Revision C:1987 | GAGE, GENERAL PURPOSE |
| MIL-E-24572 Revision B:1992 | EXTINGUISHER, FIRE, BROMOTRIFLUOROMETHANE (HALON 13O1) SYSTEMS (FIXED PIPE, PNEUMATICALLY ACTUATED, NAVAL SHIPBOARD USE) |
| MIL-P-80054 Revision D:1988 | PUNCHING MACHINE, METAL, TURRET TYPE, NUMERICALLY CONTROLLED |
| MIL C 15305 : E | COIL, FIXED AND VARIABLE, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL C 49142/8 : B | CONNECTORS, TRIAXIAL, RADIO FREQUENCY, (SERIES TRT (CABLED) PLUG, PIN CONTACT, CLASS 2) |
| MIL-V-17462 Revision B:1981 | VALVE, SAFETY, BOILER (SHIPBOARD USE) |
| MIL E 82592 : 0 | EXERCISE HEAD, IMPACT, MK 86 MOD O (FOR TORPEDO MK 37 MODS O, 2, AND 3) |
| MS25002 Revision K:2011 | SWITCH, ROTARY, 28/115 VOLTS |
| MS39233 Revision D:2015 | COUPLING, PIPE STRAIGHT (150 & 300 POUNDS) |
| MIL-DTL-83733 Revision E:2006 | CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR |
| MIL-DTL-26500 Revision G:2011 | CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE, CIRCULAR, ENVIRONMENT RESISTING OR HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL C 5015 : G | CONNECTOR, ELECTRICAL, CIRCULAR THREADED AN TYPE, GENERAL SPECIFICATION FOR |
| MIL A 24215 : A | ATTENUATORS, VARIABLE (COAXIAL AND WAVEGUIDE), GENERAL SPECIFICATION FOR |
| MIL-DTL-8834 Revision K:2016 | Switches, Toggle, Positive Break, General Specification for |
| MIL-S-52881 Revision B:1989 | SERVICING UNITS, COMPRESSED GAS, MOBILE |
| MIL-DTL-27434 Revision B:2003 | ADAPTERS, CONNECTOR, COAXIAL, RADIO FREQUENCY, BETWEEN SERIES, GENERAL SPECIFICATION FOR |
| A-A-50304 Base Document:1987 | DYNAMOMETER, ENGINE RUN-IN, 500 HORSEPOWER CAPACITY |
| OO-M-340 Revision F:2004 | MILLING, GRINDING, DRILLING, SLOTTING ATTACHMENT |
| MIL-T-19646 Revision A:1990 | THERMOMETER, REMOTE READING, SELF-INDICATING DIAL, GAS ACTUATED |
| MIL-S-24036 Revision E:1989 | SAWS, BAND, CUTOFF, HORIZONTAL, NON-ADJUSTABLE & ADJUSTABLE CUTTING ANGLE |
| MIL-P-80276 Base Document:1988 | PRESS BRAKES, HYDRAULICALLY OPERATED, SHEET AND PLATE, COMPUTER NUMERICALLY CONTROLLED (CNC) |
| MIL C 49142/11 : B (1) | CONNECTORS, TRIAXIAL, RADIO FREQUENCY, (SERIES TRT (CABLED) RECEPTACLE, SOCKET CONTACT CLASS 2) |
| GGG-C-771 Revision D:1964 | CUTTERS, PIPE; AND CUTTERS, TUBE |
| MIL-DTL-3655-1 Revision C:2008 | CONNECTOR, PLUG, ELECTRICAL, CLASS 1 (COAXIAL, SERIES TWIN) TYPE UG-421B/U |
| MIL-PRF-49142-10 Revision E:2005 | CONNECTORS, RECEPTACLE, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY, UNCABLED (SERIES TRT, SOCKET CONTACT, JAMNUT MOUNTED, CLASS 2) HERMETIC AND NONHERMETIC |
| A-A-661 Revision A:1986 | ENGRAVING MACHINE, PANTOGRAPH, TRACER GUIDED |
| MIL S 12285 : D | SWITCH, THERMOSTATIC |
| MIL-B-15237 Revision B:1954 | BATHYTHERMOGRAPHS, SURFACE VESSEL |
| MIL-PRF-49142-4 Revision H:2005 | CONNECTORS, RECEPTACLE, ELECTRICAL, TRIAXIAL, RADIO FREQUENCY, UNCABLED, (SERIES TRB, SOCKET CONTACT, JAMNUT MOUNTED, CLASS 2) HERMETIC AND NONHERMETIC |
| MIL-PRF-18546 Revision G:2004 | RESISTOR, FIXED, WIREWOUND (POWER TYPE, CHASSIS MOUNTED), GENERAL SPECIFICATION FOR |
| MIL O 55310 : C | OSCILLATOR, CRYSTAL, GENERAL SPECIFICATION FOR |
| MIL R 83726 : B | RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE LIA, HERMETICALLY SEALED, DPDT, 10 AMPERES, ADJUSTABLE TIME DELAY (EXTERNAL RESISTOR)O.1 TO 500 SECONDS |
| MIL-T-28691 Base Document:1991 | TRUCK, FIREFIGHTING, STRUCTURAL, 1000 GPM, 4 BY 2 WITH 65 FOOT TELESCOPING BOOM ESCAPE LADDER AND WATER TOWER |
| MIL C 28754 : D | CONNECTOR, ELECTRICAL, MODULAR AND COMPONENT PARTS, GENERAL SPECIFICATION FOR |
| MIL-R-23139 Revision B:1965 | ROCKET MOTORS, SURFACE LAUNCHED, DEVELOPMENT AND QUALIFICATION REQUIREMENTS FOR |
| JSSG-2010-12 Base Document:1998 | Crew Systems Deployable Aerodynamic Decelerator (DAD) Systems Handbook |
| BB-S-1419 Base Document:1970 | SULFUR HEXAFLUORIDE, TECHNICAL GRADE |
| MIL-DTL-642-14 Revision B:2013 | PLUGS, TELEPHONE (TYPE U-384/U) 5 CONDUCTOR, SINGLE |
| MIL PRF 12883 : E | SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, GENERAL SPECIFICATION FOR |
| MIL-DTL-10986 Revision G:2007 | INDICATORS AND TRANSMITTERS: LIQUID, TEMPERATURE AND PRESSURE |
| MIL-S-52156 Revision D:1988 | SURVEYING INSTRUMENT, DISTANCE MEASURING, ELECTRONIC MICROWAVE |
| MIL-W-80087 Revision C:1986 | WELDING MACHINE, ELECTRICAL RESISTANCE, SPOT, ROCKER ARM, AIR OPERATED, THREE PHASE |
| MIL-G-26869 Revision D:1989 | GROOVING MACHINE, SHEET METAL, SINGLE LOCK AND PITTSBURGH SEAMS, ELECTRIC MOTOR DRIVEN, FLOOR MOUNTED |
| MIL-A-22337 Base Document:1964 | AMPLIFIER, RESOLVER ISOLATION |
| GGG-G-770 Revision B:1973 | GUN, AIR BLOW, (BLAST CLEANING) |
| MIL C 49142/9 : B | CONNECTOR, TRIAXIAL, RADIO FREQUENCY (SERIES TRT (CABLED) RECEPTACLE, SOCKET CONTACT, JAMNUT MOUNTED CLASS 2) |
| A-A-59466 Revision C:2011 | CLIPS, ELECTRICAL, GENERAL SPECIFICATION FOR |
| MIL B 62284 : 0 | BLOWER ASSEMBLY, AIR CLEANER |
| MIL-S-12928 Revision H:1993 | SEPARATOR, OIL AND WATER, COMPRESSED AIR |
| MIL C 18388 : C | COIL, TUBE DEFLECTION, AND COILS, TUBE FOCUSING |
| MIL-DTL-24788 Revision B:2017 | Coupling Assembly, Semi-Dry-Break, Quick-Disconnect Fuel, with or without Continuity Switch |
| MIL-D-82062 Revision C:1992 | DERRICK, BARGE MOUNTING, 100-LONG-TON CAPACITY |
| MIL-PRF-39012-67 Revision C:2011 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMB (CABLED, SOCKET CONTACT, CLASS 2) |
| GGG-A-825 Revision A:1967 | AUGER MACHINE, PIPE AND SEWER, POWER OPERATED |
| MIL-P-80172 Revision C:1988 | PUNCHING MACHINE, METAL SINGLE END TYPE, NUMERICALLY CONTROLLED |
| GGG-C-735 Revision B:1988 | CUTTER, ANGLE, HAND OPERATED |
| MIL-A-22889 Base Document:1962 | AMPLIFIER, ERROR LEVEL, ASSEMBLY |
| MIL-I-23062 Base Document:1961 | IGNITER, MARK 247 MD O |
| MIL-DTL-16938 Revision D:2010 | SEARCHLIGHTS, INCANDESCENT, SIGNALING, 8-INCH |
| MIL-T-24388 Revision C:1990 | THERMOCOUPLE AND RESISTANCE TEMPERATURE ELEMENT ASSEMBLIES, GENERAL SPECIFICATION FOR (NAVAL SHIPBOARD) |
| MIL-C-52988 Revision A:1987 | CHAMBER, DECOMPRESSION, DIVERS, 100 PSI |
| MIL S 13789 : D | STRAINER, SEDIMENT, PIPELINE, BASKET TYPE |
| MIL-R-24414 Revision D:1991 | REEL, HOSE, FIRE FIGHTING, MANUALLY OPERATED |
| MIL-F-80133 Revision B:1987 | FURNACES, HEAT TREATING, PIT TYPE, ELECTRIC, FORCED CONVECTION |
| MIL-PRF-6106 Revision P:2014 | Relays, Electromagnetic General Specification for |
| MIL-A-52818 Base Document:1974 | ANCHOR, GUY: SHIELD, EXPANSION |
| MIL-DTL-17840 Revision D:2018 | PUMPS, CENTRIFUGAL, CLOSE-COUPLED, NAVY STANDARD (FOR SURFACE SHIP APPLICATION) |
| MIL-B-23755 Revision D:1991 | BRAKE MACHINES, SHEET METAL, MANUALLY OPERATED, STANDARD AND BOX-PAN TYPE |
| MIL-B-52088 Revision F:1992 | BRIDGE, ARMOURED VEHICLE LAUNCHED, SCISSORING TYPE, CLASS 60, ALUMINUM, 60 FOOT SPAN |
| MIL L 16225 : B | LOUDSPEAKER, PERMANENT MAGNET, BLASTPROOF AND SUBMERSIBLE, NAVY TYPE 49546() |
| RR-S-550 Revision E:2012 | Sockets, Wire Rope |
| FF-C-77 Revision C:1986 | CASTERS, RIGID AND SWIVEL (INSTITUTIONAL DUTY) |
| MIL-P-80128 Revision C:1987 | PRESS, H FRAME, VERTICAL, HYDRAULIC, ELECTRIC MOTOR DRIVEN |
| MIL-DTL-21617-29 Base Document:2003 | CONNECTOR, RECEPTACLE ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, BACK SHELLS |
| NASM35308:2015 | SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNF-2A |
| SAE AIR 4728 : 2013 | REFERENCES, SPACECRAFT AND SPACECRAFT SERVICING, FLUID SYSTEM COMPONENTS (ABBREVIATIONS, ACRONYMS, DEFINITIONS, APPLICABLE DOCUMENTS AND ENVIRONMENTAL CONDITIONS) |
| SAE AS 5877 : 2016 | DETAILED SPECIFICATION FOR AIRCRAFT PRESSURE REFUELING NOZZLE |
| SAE MA 2250 : 2015 | COUPLING FUEL, FLEXIBLE VARIABLE CAVITY, THREADED TYPE WITH FERRULES, METRIC |
| MS75009 Revision J:2005 | BRACKET ASSEMBLY, RESISTOR (POWER TYPE) |
| BS EN 3716-001:2006 | Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data Technical specification |
| BS EN 2997-11:1997 | Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peak Dummy receptacle. Product standard |
| MSS SP 58 : 2009 | PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION |
| MIL-DTL-83725 Revision E:2017 | Relays, Vacuum, General Specification for |
| EN 291997-11 : 1997 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 11: DUMMY RECEPTACLE - PRODUCT STANDARD |
| EN 291997-6 : 1997 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE RESISTANT, OPERATING TEMPERATURES 175 DEGREE C CONTINUOUS, 200 DEGREE C CONTINUOUS, 260 DEGREE C PEAK - PART 6: HERMETIC JAM-NUT MOUNTED RECEPTACLE - PRODUCT STANDARD |
| EN 2997-4 : 1997 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE RESISTANT, OPERATING TEMPERATURES 175 DEGREE C CONTINUOUS, 200 DEGREE C CONTINUOUS, 260 DEGREE C PEAK - PART 4: JAM-NUT MOUNTED RECEPTACLE - PRODUCT STANDARD |
| EN 3218-001 : 2006 | AEROSPACE SERIES - CONNECTORS, RECTANGULAR, WITH METALLIC SHELLS AND SCREW-LOCKING - PART 001: TECHNICAL SPECIFICATION |
| EN 2997-9 : 1997 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE RESISTANT, OPERATING TEMPERATURES 175 DEGREE C CONTINUOUS, 200 DEGREE C CONTINUOUS, 260 DEGREE C PEAK - PART 9: PROTECTIVE COVER FOR RECEPTACLE - PRODUCT STANDARD |
| EN 3545-005:2014 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C - Part 005: Female coding and attachment System for mounting on free housing (plug) - Product standard |
| EN 291997-10 : 1997 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE RESISTANT, OPERATING TEMPERATURES 175 DEGREE C CONTINUOUS, 200 DEGREE C CONTINUOUS, 260 DEGREE C PEAK - PART 10: PROTECTIVE COVER FOR PLUG - PRODUCT STANDARD |
| EN 3716-001 : 2006 | AEROSPACE SERIES - CONNECTOR, SINGLE-WAY, WITH TRIAXIAL INTERFACE, FOR TRANSMISSION OF DIGITAL DATA - PART 001: TECHNICAL SPECIFICATION |
| EN 3545-001:2008 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 001: Technical specification |
| MIL-PRF-10304 Revision F:1999 | METERS, ELECTRICAL INDICATING, PANEL TYPE, RUGGEDIZED, GENERAL SPECIFICATION FOR |
| MIL S 13735 : D | SWITCH, TOGGLE, 28 VOLT DC |
| MIL-F-26301 Revision H:2014 | FLASHER, SOLID STATE, AIRCRAFT NAVIGATIONAL LIGHT, GENERAL SPECIFICATION FOR |
| MIL-DTL-9129 Revision G:2014 | Discharges, Electrostatic General Specification for |
| MIL-DTL-24630 Revision A:2014 | VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID, GENERAL SPECIFICATION FOR |
| MIL C 55302 : E | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE |
| MIL-C-29600 Base Document:1989 | CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE, CRIMP CONTACTS, ASSOCIATED HARDWARE GENERAL SPECIFICATION FOR |
| MIL-W-45844 Revision D:1987 | WELDING MACHINE, RESISTANCE, SPOT & TYPE PORTABLE (AUTOMOTIVE REPAIR) |
| MIL-A-13092 Revision G:1990 | ADAPTER SET, ENGINE ELECTRICAL TEST |
| MIL-PRF-39012-70 Revision D:2011 | Connectors, Receptacle, Electrical, Coaxial, Radio Frequency, Series SMB (Cabled, Pin Contact, Jamnut Mounted, Rear Mounted, Class 2) |
| MIL-B-23394 Revision B:1966 | BATTERY MARK 46 MOD 1 PRIMARY TYPE, SILVER-ZINC-ALKALI |
| NN-H-0085 Base Document:1964 | HANDLE, FILE (ADJUSTABLE TYPE) |
| GGG-B-490 Revision F:1992 | BLOCKS, TACKLE (MANILA AND NYLON ROPE) |
| MIL C 83383 : C | CIRCUIT BREAKER, REMOTE CONTROL THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR |
| OO-S-236 Revision E:2015 | SAW, CIRCULAR, TABLE TYPE, WOODWORKING, SINGLE TILTING ARBOR, FLOOR MOUNTED |
| MIL-A-21430 Revision B:1974 | ACCESSORY SET MARK 1 MOD 1 |
| MIL-STD-648 Revision E:2016 | Specialized Shipping Containers |
| MIL-H-11689 Revision C:1974 | HAMMER, PNEUMATIC, PORTABLE, NAIL-DRIVING |
| GGG-S-58 Revision F:1993 | Saw, Radial Overarm, Woodworking (No S/S Document) |
| MIL-A-22335 Base Document:1964 | AMPLIFIER, VARIABLE GAIN |
| MIL G 45006 : F NOTICE 1 | GRINDING MACHINE, CRANKSHAFT |
| MIL-PRF-39012-58 Revision H:2011 | CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES SMA (CABLED) - SOCKET CONTACT, FLANGE MOUNTED CLASS 2) |
| MIL T 21038 : D | TRANSFORMERS, PULSE, LOW POWER, GENERAL SPECIFICATION FOR |
| WW-P-471 Revision C:1981 | PIPE FITTINGS: BUSHINGS, LOCKNUTS, AND PLUGS; IRON, STEEL, AND ALUMINUM; (THREADED); 125 - 150 POUNDS |
| GGG-J-63 Revision C:1975 | JACK, HYDRAULIC, HAND; JACK, BUMPER (HYDRAULIC) |
| L-H-520 Revision G:1983 | HOSE AND HOSE ASSEMBLIES, NON-METALLIC (RUBBER, PLASTIC) |
| MIL S 28788 : A | SWITCH, AIR AND LIQUID FLOW, SENSING GENERAL SPECIFICATION FOR |
| GG-L-260 Revision E:1988 | LEVEL, SURVEYING; ABNEY TYPE |
| MIL-DTL-26202 Revision E:2006 | LIGHT, MARKER, AIRPORT, SEMIFLUSH, GENERAL SPECIFICATION FOR |
| MIL-L-80007 Revision E:1989 | LATHES, TOOLROOM, 11-INCH THROUGH 13-INCH |
| 06/30157875 DC : 0 | PREN 2593-004 - AEROSPACE SERIES - BASES FOR 10 A ELECTROMAGNETIC PLUG-IN RELAYS, TWO AND FOUR POLES DOUBLE THROW - PART 004: BASE WITH MOLDED-IN FIXATION STUD, UNIFIED - PRODUCT STANDARD |
| MIL-PRF-83287 Revision G:2007 | INDICATORS, FAULT LOCATING, GENERAL SPECIFICATION FOR |
| MIL-DTL-20065 Revision E:2016 | VALVES, ANGLE, PRESSURE RELIEF, NAVAL SHIPBOARD, FOR STEAM SERVICE |
| NASM 21209 : 2003 | INSERT, SCREW THREAD, COARSE AND FINE, SCREW LOCKING, HELICAL COIL, CRES |
| MIL-W-80187 Revision A:1985 | WELDING MACHINE, ULTRASONIC BONDING, MINIATURE WIRE |
| MIL S 12211 : E | SWITCH, PRESSURE |
| MIL A 55339 : A | ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, (BETWEEN SERIES & WITHIN SERIES) GENERAL SPECIFICATION FOR |
| MIL-A-22339 Base Document:1964 | AMPLIFIERS, COMPUTATION |
| MIL S 15291 : E | SWITCHES, ROTARY, SNAP ACTION AND DETENT/SPRING RETURN ACTION, GENERAL SPECIFICATION FOR |
| MIL N 45913 : B | NUTS, SELF LOCKING, HEXAGON, PREVAILING-TORQUE |
| MIL-C-52978 Base Document:1980 | CHEST, COLLAPSIBLE TANK |
| MIL C 83413 : A | CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING, GENERAL SPECIFICATION FOR |
| MIL C 55116 : B | CONNECTOR, MINIATURE AUDIO, FIVE PIN |
| MIL V 23953 : C | VALVE, COMBINED VENT-CHECK FOR SUBMARINE MBT BLOW LINES (SIZES 1-1/2 TO 2-1/2 INCHES) |
| MIL-STD-2193 Revision C:2012 | Ship Hydraulic System Components |
| GGG-T-00570 Revision A:1965 | TORCH KIT, SOLDERING (PROPANE GAS) |
| MIL-DTL-18001 Revision L:2013 | ANODES, SACRIFICIAL ZINC ALLOY |
| F-F-351 Revision F:1999 | FILTER AND FILTER ELEMENTS, FLUID, PRESSURE, LUBRICATING OIL, BYPASS AND FULL FLOW |
| MIL-PRF-32217 Revision A:2011 | SCALE PREVENTION IN SEWAGE COLLECTION, HOLDING AND TRANSFER (CHT) AND VACUUM CHT (VCHT) PIPING SYSTEMS FOR USE ON NAVAL SURFACE SHIPS |
| MIL-B-18558 Revision B:1988 | Bearing, Propulsion Line Shaft, Oil Disc Lubricated |
| GGG-B-485 Revision B:1978 | BLOCK, TACKLE, WIRE ROPE, WITH SWIVEL HOOK, (FOR CRANE USE) |
| MIL-P-11268 Revision L:1983 | PART, MATERIALS, AND PROCESSES USED IN ELECTRONIC EQUIPMENT |
| MIL-DTL-24044 Revision C:2013 | FLANGES, COAXIAL LINE, RIGID, AIR DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-DTL-13931 Revision J:1999 | Cannon: General Specification for |
| MIL-F-80258 Revision A:1986 | FURNACES, HEAT-TREATING, ELECTRIC, NATURAL ATMOSPHERE, BOX TYPE |
| MIL-PRF-83726 Revision H:2017 | Relays, Hybrid and Solid State, Time Delay, General Specification for |
| MIL-M-24605 Revision A:1988 | MONITOR, HEAT STRESS |
| MIL-PRF-39012-74 Revision D:2011 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMC (CABLED, PIN CONTACT, CLASS 2) |
| MIL-PRF-39012-80 Revision F:2008 | Connectors, Plug, Electrical, Coaxial, Radio Frequency, Series SMA (Cabled) Pin Contact, Right Angle, Class 2, Semirigid Cable |
| MIL-PRF-39012-3 Revision H:2006 | CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES N (CABLED), JAM NUT MOUNTED, SOCKET CONTACT, CLASS 2) |
| MIL-DTL-24215 Revision E:2015 | ATTENUATORS, VARIABLE (COAXIAL), GENERAL SPECIFICATION FOR |
| MIL-T-7928 Revision G:1976 | TERMINAL, LUG SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| A-A-2622 Revision A:1998 | ADAPTERS, PIPE TO HOSE, STRAIGHT OR REDUCING |
| MIL-PRF-39012-59 Revision H:2011 | CONNECTORS, RECEPTACLES, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES SMA (CABLED) - SOCKET CONTACT, JAM NUT MOUNTED CLASS 2) |
| GG-C-560 Revision D:1986 | COMPASSES, MAGNETIC, SURVEYORS & TRANSIT, POCKET, WITH OPTIONAL BALL & SOCKET JOINT OR BALL & SOCKET HEAD, & JACOBS STAFF |
| MIL I 45916 : B | INSERT,SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
| MIL-B-40098 Revision H:1989 | BURNER UNIT, GASOLINE, FIELD RANGE OUTFIT, M2A |
| MIL L 12606 : D | LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3 INCH AND 4 INCH DIAMETER CONE, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), TYPE LL-445/U, M12606-01, AND M12606-02 |
| GGG-D-780 Revision A:1965 | DRIVER, PROJECTILE, UNIT, POWDER ACTUATED (TRIGGER-FIRED, LOW VELOCITY, PISTON TYPE) |
| MIL-B-52796 Revision A:1977 | BOLTS, RIBBED NECK, STRUCTURAL TYPE, WITH RECESSED LOCKNUT |
| MIL R 19365 : E | RESISTOR, ADJUSTABLE, WIREWOUND, POWER |
| MIL-B-1947 Revision A:1960 | BLOWER, SOOT (SHIPBOARD USE) |
| MIL-B-11818 Revision D:1985 | BAROMETER, ANEROID ML-102() |
| MIL-R-14368 Revision C:1974 | REGULATOR ASSEMBLY, RELAY ASSEMBLY, AND VOLTAGE REGULATOR ASSEMBLY: 24-VOLT (NOMINAL RATING), 100 TO 400 AMPERE, DIRECT CURRENT |
| MIL-PRF-39012-19 Revision H:2006 | CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC (CABLED), SOCKET CONTACT, JAM NUT MOUNTED CLASS 2) |
| MIL-W-80253 Revision B:1990 | WELDING MACHINE, ELECTRICAL, RESISTANCE, SPOT, PRESS TYPE, SINGLE PHASE |
| MIL-A-45997 Base Document:1987 | ATTACHMENTS, CUTTING FOR TORCHES, OXYACETYLENE WELDING AND CUTTING |
| MIL-PRF-39012-68 Revision D:2011 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMB (CABLED, PIN CONTACT, CLASS 2) |
| MIL H 53076 : 1987 | HEMTT TANKER AVIATION REFUELING SYSTEM (HTARS) |
| MIL L 10911 : D | LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 2.5-, 3-, 4-, 5-, 6-, 8-, 10-, AND 12-, INCH DIAMETER CONE) |
| MIL-F-80113 Revision D:1988 | FURNACE, VACUUM, HEAT TREATING AND BRAZING |
| MIL-F-80089 Revision B:1986 | FURNACES, HEAT-TREATING, GAS-FIRED, BOX-TYPE, DIRECT-FIRED AND FULL-MUFFLE DESIGN |
| MIL-D-80002 Revision E:1989 | DRILLING MACHINE, UPRIGHT FLOOR TYPE, ROUND & BOX COLUMN, SLIDING HEAD, PLAIN TABLE, POWER FEED |
| GGG-O-591 Revision F:1977 | OILER, HAND |
| MIL S 87966 : NOTICE 1 | SAFETY EQUIPMENT FALL ARRESTING |
| MIL-A-22334 Base Document:1964 | AMPLIFIER, SYNCHRO SERVO, 6 WATT 4OO CYCLE |
| W-C-440 Revision B:1970 | CLIP, ELECTRICAL, GENERAL SPECIFICATION FOR |
| MIL-PRF-39012-136 Revision A:2007 | CONNECTORS, PLUG, ELECTRICAL, SERIES SSMA, PIN CONTACT, FOR SEMIRIGID CABLE, CLASS 2 |
| MIL H 29210 : B | HOSE ASSEMBLY, RUBBER, METAL LINED, WIRE REINFORCED, 250 PSIG, SATURATED STEAM SERVICE |
| GGG-T-661 Revision B:1966 | TRAMMELS AND TRAMMEL POINTS |
| MIL-F-29046 Base Document:1974 | FLOORING, RAISED, GENERAL SPECIFICATION FOR |
| MIL-H-28596 Revision B:1981 | HOSE AND HOSE ASSEMBLY, RUBBER, STEAM |
| MIL-C-10015 Revision D:1982 | CHEST, TOOL KIT, EMPTY |
| GGG-J-51 Revision E:1967 | JACKS, MECHANICAL, HAND OPERATED (SCREW; SCISSORS; REEL; PLANER; AND RACK BAR) |
| MIL-W-80256 Revision A:1987 | WELDING MACHINES, ELECTRICAL, RESISTANCE, SPOT, PRESS TYPE, AIR OPERATED, SINGLE PHASE |
| MIL-B-2679 Revision A:1963 | BRUSHES, WIRE, BOILER-TUBE, SECTIONAL TYPE, HAND PUSH |
| GGG-F-671 Revision B:1957 | FRAME, HAND HACKSAW; FRAME, JEWELER'S SAW; AND FRAME, COPING SAW |
| MIL-B-45852 Revision A:1965 | BORESCOPES M1 AND M2 |
| GGG-D-698 Revision A:1963 | DRILL, RATCHET (REVERSIBLE) |
| MIL-W-80070 Revision D:1987 | WELDING MACHINE, ELECTRICAL, RESISTANCE, SPOT, ROCKER, ARM, SINGLE PHASE |
| GGG-P-836 Revision A:1995 | PUNCH AND DIE, KNOCKOUT |
| MIL-E-24715 Base Document:1989 | EXTINGUISHERS, FIRE. VAPORIZING LIQUID (BROMOCHLORODIFLUOROMETHANE, HALON 1211) |
| MIL-A-19521 Revision B:1992 | ANODE RETAINING SUPPORT PLUGS AND ANODE SELECTION AND INSTALLATION DESIGN CRITERIA FOR SHIPBOARD CONDENSERS AND HEAT EXCHANGERS |
| MIL S 21604 : D | SWITCHES, ROTARY, MULTIPOLE AND SELECTOR - GENERAL SPECIFICATION FOR |
| MIL-DTL-1189 Revision E:2018 | VALVE, GATE, BRONZE |
| MIL-DTL-22606 Revision D:2011 | FLASK AND END PLUGS, COMPRESSED GAS - AIR, OXYGEN, AND NITROGEN |
| MIL-B-11837 Revision C:1983 | BLOCKS, TACKLE (WIRE ROPE, SNATCH, EXTRA-HEAVY DUTY) |
| MIL-DTL-17505 Revision G:2014 | Hose and Hose Assembly, Rubber, Oil and Gasoline, Suction and Discharge |
| MIL-T-52809 Revision A:1986 | TRUCKS, HAND, LIFT; PALLET, MANUAL-HYDRAULIC |
| MIL-DTL-62011 Revision E:2009 | Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, General Specification for |
| MIL-PRF-39012-27 Revision H:2010 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES TNC, (CABLED), SOCKET CONTACT, CLASS 2) |
| MIL-PRF-39018 Revision G:2009 | CAPACITOR, FIXED, ELECTROLYTIC (ALUMINUM OXIDE), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-I-26525 Revision F:1988 | INDICATOR, VOLTAGE, BATTERY GENERATOR 28 VOLT DC (NOMINAL) |
| MIL-S-16293 Revision G:1980 | STRAINER, SEDIMENT, PIPELINE, WATER, AIR, GAS, OIL, OR STEAM |
| MIL-PRF-39012-7 Revision E:2015 | CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES C (CABLED), FEMALE, CLASS 2) |
| MIL-PRF-39012-56 Revision G:2011 | CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SMA (CABLED) - PLUG, PIN CONTACT, RIGHT ANGLE, CLASS 2) |
| MIL C 3650 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES LC |
| GGG-V-440 Revision A:1967 | VISE, HANDSAW, FILING; BAND SAW FILING; AND CIRCULAR SAW FILING |
| MIL I 87108 : A | INFLATION ASSEMBLY, FLU-2A/P |
| MIL-B-21518 Revision A:1961 | BELLOWS ASSEMBLY, FLEXIBLE, FOR LAUNCHING SYSTEM, MISSILE MARK 17 MODS 0, 1, 2 AND 3 |
| MIL-C-19902 Revision C:1986 | CAPS, VENT, FUEL STORAGE TANK |
| MIL-PRF-28523 Revision C:1997 | HOSE ASSEMBLY, RUBBER, HYDRAULIC AND PNEUMATIC, JETTING (400 PSI WORKING PRESSURE) |
| MIL S 19500 : J | SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
| MIL-S-23772 Base Document:1963 | SWITCH, HYDROSTATIC, MARK 63 MOD O AND MOD 1 |
| MIL T 28679 : A | TESTER, ANTIFREEZE AND BATTERY ELECTROLYTE SOLUTION |
| MIL-B-83183 Revision B:1987 | BARRIER, AIRCRAFT ARRESTING |
| MIL-W-80124 Revision C:1987 | WELDING MACHINE (MICROWELDER), RESISTANCE, SINGLE PHASE, BENCH MOUNTED |
| MIL-E-23778 Base Document:1963 | EXPLOSIVE FITTING MARK 7 MOD O |
| MIL-PRF-39012-18 Revision H:2006 | CONNECTORS, RECEPTACLE, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES BNC, (CABLED), SOCKET CONTACT, FLANGE MOUNTED, CLASS 2) |
| MIL-DTL-5423 Revision E:2009 | BOOTS, DUST AND MOISTURE SEAL (FOR TOGGLE AND PUSH-BUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY-ACTUATED PARTS), GENERAL SPECIFICATION FOR |
| MIL-PRF-80095 Revision E:2015 | SAWS, BAND, WOODWORKING |
| A-A-59440 Revision D:2014 | COCK-VALVES AND VALVES, GENERAL REQUIREMENTS FOR |
| MIL-PRF-39012-1 Revision J:2016 | CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, (SERIES N (CABLED), PIN CONTACT, CLASS 2) |
| MIL-A-14295 Revision C:1985 | ALIGNMENT EQUIPMENT, WHEEL, FOR MILITARY WHEELED VEHICLES |
| MIL-PRF-39012-83 Revision G:2007 | CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED, SEMIRIGID) - JAM NUT MOUNTED, SOCKET CONTACT, CLASS 2 |
| MIL-PRF-19500-124 Revision M:2016 | SEMICONDUCTOR DEVICE, DIODE, SILICON, VOLTAGE REGULATOR, CASE MOUNT STUD PACKAGE, STANDARD AND REVERSE POLARITY, TYPES 1N2970B THROUGH 1N2977B, 1N2979B, 1N2980B, 1N2982B, 1N2984B THROUGH 1N2986B, 1N2988B THROUGH 1N2993B, 1N2995B, 1N2997B, 1N2999B THROUGH 1N3005B, 1N3007B, 1N3008B, 1N3009B, 1N3011B, 1N3012B, 1N3014B, 1N3015B, 1N3993A THROUGH 1N3998A, QUALITY LEVELS JAN, |
| MIL-A-18850 Revision C:1970 | AMPLIFIER, SERVO (FOR TORPEDO MARK 37 MODS 0, 2, AND 3) |
| MIL L 7830 : D | LIGHT ASSEMBLY, MARKER, AIRCRAFT OBSTRUCTION |
| MIL-M-45907 Revision A:1984 | MOUNT,SHIPPING CONTAINER, RESILIENT - SHOCK AND VIBRATION DAMPING |
| MIL-L-13896 Revision E:1987 | LATHES, ENGINE, GAP, SLIDING BED AND REMOVABLE BLOCK |
| MIL-M-81385 Revision A:1967 | MANIFOLD STEM ASSEMBLIES, LIFE PRESERVER |
| MIL-B-21160 Base Document:1957 | BLADDERS, FLOTATION, MK 2 MOD 0 AND MK 2 MOD 1 |
| MIL-T-11372 Revision F:1991 | TRIVET, SURVEYING INSTRUMENT |
| MIL-T-4638 Revision B:1985 | TESTERS, MATERIAL HARDNESS (ROCKWELL TYPE) |
| MIL F 18953 : B | FAN, VANEAXIAL AND TUBEAXIAL, FIXED AND PORTABLE, VENTILATION, NAVAL SHIPBOARD |
| MIL-DTL-28875 Revision C:2012 | Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for |
| KKK-T-728 Revision A:1973 | TRUCK, HAND, TWO-WHEELED (LIGHT DUTY) 300 POUND CAPACITY |
| MIL F 23808 : NOTICE 1 | FILING MACHINE, SAW BLADE, BAND AND CIRCULAR, AUTOMATIC |
| MIL-B-82117 Revision D:1983 | BATTERY, STORAGE, SILVER-ZINC, RECHARGEABLE, GENERAL SPECIFICATION |
| 00/707786 DC : 0 | PREN 4165-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURES 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| BB-F-1421 Revision B:1982 | FLUOROCARBON REFRIGERANTS |
| ASTM F 1565 : 2000 : R2006 | Standard Specification for Pressure-Reducing Valves for Steam Service |
| MIL C 55181 : C | CONNECTOR, PLUG & RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF) TYPE MW, GENERAL SPECIFICATION FOR |
| A-A-55137 Revision A:2017 | SAW, JIG, WOODWORKING |
| MIL-F-80069 Revision D:1989 | FLARING, FLANGING, AND BEADING MACHINES, TUBE |
| FF-T-791 Revision B:1967 | TURNBUCKLE |
| MIL-A-45597 Revision A:1984 | ANALYZER, ENGINE, ELECTRONIC, CONSOLE-TYPE |
| GGG-D-777 Revision B:1966 | DRIVER, PROJECTILE UNIT, POWDER ACTUATED (HIGH VELOCITY) (ABOVE WATER ONLY); PIN, DRIVE, POWDER ACTUATED; AND CARTRIDGE, POWDER ACTUATED TOOL |
| MIL-DTL-38159 Revision D:2015 | CONNECTORS, ELECTRIC, RAMP POWER, 416/240 VOLTS |
| MIL P 24705 : A | PENETRATORS, MULTIPLE CABLE, FOR ELECTRICAL CABLES, GENERAL SPECIFICATION FOR |
| GGG-D-296 Revision B:1968 | DIE, THREADCUTTING AND RETHREADING, COLLET, THREADING DIE; AND DIESTOCK (BOLT AND SCREW THREADING, UNIFIED, AMERICAN NATIONAL AND METRIC FORM THREADS) |
| DOD-STD-35-126 Base Document:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, CYLINDERS, ACTUATING, LINEAR |
| MIL-DTL-3643 Revision B:2003 | Connectors, Coaxial, Radio Frequency, Series HN, and Associated Fittings, General Specification for |
| MIL-DTL-3650 Revision B:2003 | Connectors, Coaxial, Radio Frequency, Series LC |
| MIL-O-81144 Revision B:1970 | OSCILLATOR SUBASSEMBLY (NOSC DWG NO. 1563731)(TORPEDO MARK 37 MODS O AND 1) |
| MIL-PRF-32085 Base Document:2001 | RELAYS, ELECTROMAGNETIC, 270 V DC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL V 81722 : A | VALVE, INFLATION, LIFE RAFT, FLU-6/P |
| MIL-P-85576 Revision B:1987 | POWER SUPPLY PP-2581C/A |
| MIL-S-80224 Revision A:1989 | SHEARING MACHINE, METAL NOTCHING, POWER DRIVEN |
| MS3345 Revision C:2013 | FLANGE, SPLIT MOUNTING METER TIME TOTALIZING |
| MIL C 19978 : F | CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC, (HERMETICALLY SEALED IN METAL, CERAMIC, OR GLASS CASES) ESTABLISHED AND NON-ESTABLISHED RELIABILITY - GENERAL SPECIFICATION FOR |
| MIL T 24558 : 0 | TERMINAL BOXES, CONNECTION, FOR ELECTRICAL AND ELECTRONIC SYSTEMS, GENERAL SPECIFICATION FOR |
| SAE AS 1371 : 2015 | NUTS, SELF-LOCKING, CORROSION RESISTANT STEEL, HIGH STRENGTH, PREVAILING TORQUE, ALL METAL, 800 DEGREES F (427 DEGREES C) USE, UNJ THREAD FORM |
| MIL-PRF-49142-8 Revision D:2005 | CONNECTORS, TRIAXIAL, RADIO FREQUENCY (SERIES TRT (CABLED), PLUG, PIN CONTACT, CLASS 2) |
| MIL-F-45911 Revision A:1973 | FITTINGS, AUTOMOTIVE TUBE, SPHERICAL SLEEVE (COMPRESSION) TYPE, BRASS |
| MIL-C-10147 Revision D:1984 | CABINET, PHOTOGRAPHIC STORAGE, FILM BM-11( ) |
| PREN 3716-001 : 200P1 | AEROSPACE SERIES - CONNECTOR, SINGLE-WAY, WITH TRIAXIAL INTERFACE, FOR TRANSMISSION OF DIGITAL DATA - PART 001: TECHNICAL SPECIFICATION |
| SAE AS 82 : 2018 | SCREW THREAD FORM, AMERICAN NATIONAL, MODIFIED (NATIONAL ROUND - NR) |
| NAS1599:1980 | CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE CIRCULAR, ENVIRONMENT RESISTING, 200 DEG. C. MAXIMUM TEMPERATURE |
| STANAG 2916 : 2011 | NOSE FUZE CONTOURS AND MATCHING PROJECTILE CAVITIES FOR ARTILLERY AND MORTAR PROJECTILES |
| SAE AS 50151 : 2015 | CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR |
| BS EN 2997-4:1997 | Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 175°C continuous, 200°C continuous, 260°C peak Jam-nut mounted receptacle. Product standard |
| BS EN 3218-001:2006 | Aerospace series. Connectors, rectangular, with metallic shells and screw-locking Technical specification |
| ASME B40.200:2008(R2013) | Thermometers, Direct Reading and Remote Reading <br> |
| ASME Y14.6:2001 | SCREW THREAD REPRESENTATION |
| ASME Y14.6 : 2001 : R2013 | SCREW THREAD REPRESENTATION |
| ASME Y14.6 : 2001 : R2007 | SCREW THREAD REPRESENTATION |
| ASME B40.200 : 2008 | THERMOMETERS, DIRECT READING AND REMOTE READING |
| ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
| ANSI C81.62 : 2017 | ELECTRIC LAMPHOLDERS |
| CGA E 1 : 2016 | STANDARD FOR RUBBER WELDING HOSE AND HOSE CONNECTIONS FOR GAS WELDING, CUTTING, AND ALLIED PROCESSES |
| ASME B1.12 : 1987 | CLASS 5 INTERFERENCE-FIT THREAD |
| CGA V 1 : 2013 | STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS |
| FED-STD-H28-4 Base Document:1978 | Screw Thread Standards for Federal Services, Section 4, Controlled Radius Rood Screw Threads, UNJ Symbol |
| FED-STD-H28-23 Base Document:1989 | Screw-Thread Standards for Federal Services Section 23 Class 5 Interference-Fit Screw Threads |
| FED-STD-H28-18 Revision B:1991 | SCREW-THREAD STANDARDS FOR FEDERAL SERVICES SECTION 18 PHOTOGRAPHIC EQUIPMENT THREADS |
| FED-STD-H28-1 Revision A:1985 | SCREW THREAD STANDARDS FOR FEDERAL SERVICES, SECTION 1, NOMENCLATURE, DEFINITIONS AND LETTER SYMBOLS FOR SCREW THREADS |
| FED-STD-H28-8 Revision B:1992 | Screw-Thread Standards for Federal Services Section 8 Dryseal Pipe Threads |
| FED-STD-H28-22 Revision A:1987 | Screw-Thread Standards for Federal Services Section 22 Gages and Gaging for Metric Screw Threads-M and MJ Thread Forms |
| NFPA 1963 : 2014 | FIRE HOSE CONNECTIONS |
| ASME B18.6.4 : 1998 | THREAD FORMING AND THREAD CUTTING TAPPING SCREWS AND METALLIC DRIVE SCREWS, INCH SERIES |
| SMPTE ST 76 : 96(R2006) | MOTION-PICTURE CAMERAS - 16-MM AND 8-MM THREADED LENS MOUNTS |
| ANSI PH3.107 : 83(R1987) | SHUTTER CABLE RELEASE TIP AND SOCKET, DIMENSIONS FOR, |
| ANSI PH3.101 : 83(R1987) | TRIPOD CONNECTIONS FOR AMERICAN CAMERAS, 1/4-INCH-20 THREAD, |
| FED-STD-H28-10 Revision A:1993 | Screw-Thread Standards for Federal Services Section 10 Hose Coupling and Fire Hose Coupling Screw Threads |
| ANSI C81.61 : 2017 | ELECTRIC LAMP BASES - SPECIFICATIONS FOR BASES (CAPS) FOR ELECTRIC LAMPS |
| FED-STD-H28-14 Revision A:1983 | Screw-Thread Standards for Federal Services Section 14 Buttress Screw Threads-7 Deg./45 Deg. Flank Angles |
| FED-STD-H28-5 Base Document:1978 | Screw Thread Standards for Federal Services, Section 5, Unified Miniature Screw Threads |
| ANSI PH3.102 : 83(R1987) | TRIPOD CONNECTIONS FOR HEAVY-DUTY OR IMPORTED CAMERAS, 2/8-INCH-16 THREAD WITH ADAPTER FOR 1/4-INCH 20 THREAD TRIPOD SCREWS, |
| ASME B18.6.2 : 1998 | SLOTTED HEAD CAP SCREWS, SQAURE HEAD SET SCREWS, AND SLOTTED HEADLESS SET SCREWS (INCH SERIES) |
| FED-STD-H28-21 Revision B:1984 | Screw-Thread Standards for Federal Services Section 21 Metric Screw-Threads |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| FED-STD-H28-3 Base Document:1978 | SCREW-THREADS STANDARDS FOR FEDERAL SERVICES 1957 |
| FED-STD-H28-2 Revision B:1991 | Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads- UN and UNR Thread Forms |
| FED-STD-H28-15 Revision B:1994 | Screw-Thread Standards for Federal Services Section 15 Rolled Threads for Screw-Shells for ELectric Lampholders and Lamp Bases |
| MIL-S-8879 Revision C:1991 | SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR |
| FED-STD-H28-11 Base Document:1978 | SCREW THREAD STANDARDS FOR FEDERAL SERVICES, SECTION 11, HOSE CONNECTIONS FOR WELDING AND CUTTING EQUIPMENT |
| FED-STD-H28-7 Revision A:1984 | Screw-Thread Standards for Federal Sevices Section 7 Pipe Threads, General Purpose |
| FED-STD-H28-17 Revision A:1985 | Screw-Thread Standards for Federal Services Section 17 Surveying Instrument Mounting Threads |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| FED-STD-H28-16 Base Document:1978 | SCREW THREAD STANDARDS FOR FEDERAL SERVICES SECTION 16 MICROSCOPE OBJECTIVE AND NOISE PIECE, 0.800 - 36AMO |
| FED-STD-H28-20 Revision B:1994 | SCREW THREAD STANDARDS FOR FEDERAL SERVICES, SECTION 20, INSPECTION METHODS FOR ACCEPTABILITY OF UN, UNR, UNJ, M, AND MJ SCREW THREADS |
| FED-STD-H28-6 Revision A:1978 | SCREW-THREAD STANDARDS FOR FEDERAL SERVICES SECTION 6 GAGES AND GAGING FOR UNIFIED SCREW THREADS-UN AND UNR THREAD FORMS |
| ANSI PH3.103 : 83(R1987) | LENS BARREL ATTACHMENT THREADS FOR LENS ACCESSORIES, SPECIFICATIONS FOR, |
| MIL-HDBK-60 Base Document:1990 | THREADED FASTENERS - TIGHTENING TO PROPER TENSION |
| ASME B18.6.3 : 2013 | MACHINE SCREWS, TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES) |
| ANSI C81.63 : 2007(R2014) | GAUGES FOR ELECTRIC LAMP BASES AND LAMPHOLDERS |
$32.74
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.