Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

I.S. EN 10088-5:2009

Current
Current

The latest, up-to-date edition.

STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2009

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designation and ordering
   4.1 Designation of steel grades
   4.2 Order designation
5 Classification of grades
6 Requirements
   6.1 Steelmaking process
   6.2 Delivery condition
   6.3 Chemical composition
   6.4 Chemical corrosion properties
   6.5 Mechanical properties
   6.6 Surface quality
   6.7 Internal soundness
   6.8 Formability at room temperature
   6.9 Dimensions and tolerances on dimensions and shape
   6.10 Calculation of mass and tolerances on mass
7 Inspection and testing
   7.1 General
   7.2 Agreement on tests and inspection documents
   7.3 Specific inspection and testing
   7.4 Test methods
   7.5 Retests
8 Evaluation of conformity
   8.1 General
   8.2 Initial type testing
   8.3 Factory production control (FPC)
9 Marking
10 Dangerous substances
Annex A (informative) - Guidelines for further treatment
        (including heat treatment) in fabrication
Annex B (normative) - Applicable dimensional standards
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 89/106/EEC, EU Construction Products
         Directive
Bibliography

Defines the technical delivery conditions for hot or cold formed bars, rods, wire, sections and bright products of standard and special grades of corrosion resisting stainless steels for construction purposes in addition to the general technical delivery conditions specified in EN 10021.

DocumentType
Standard
Pages
55
PublisherName
National Standards Authority of Ireland
Status
Current

Standards Relationship
EN 10088-5:2009 Identical

EN ISO 14284:2002 Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10052:1993 Vocabulary of heat treatment terms for ferrous products
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
EN 10079:2007 Definition of steel products
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 10270-3:2011 Steel wire for mechanical springs - Part 3: Stainless spring steel wire
CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
EN 10221:1995 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
EN 10002-5:1991 Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature
EN 10056-2:1993 Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
EN ISO 377:2017 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
EN 10279:2000 Hot rolled steel channels - Tolerances on shape, dimensions and mass
EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10034:1993 Structural steel I and H sections - Tolerances on shape and dimensions
EN 10264-4:2012 Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
EN 10168:2004 Steel products - Inspection documents - List of information and description
EN 10024:1995 Hot rolled taper flange I sections - Tolerances on shape and dimensions
EN 10045-1 : 1990 METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
EN 10095:1999 Heat resisting steels and nickel alloys
EN 10306:2001 Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams
EN 10278:1999 Dimensions and tolerances of bright steel products
EN 10060:2003 Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10272:2016 Stainless steel bars for pressure purposes
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 10021:2006 General technical delivery conditions for steel products
EN 10017:2004 Steel rod for drawing and/or cold rolling - Dimensions and tolerances
ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
EN 10163-3:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections
EN 10204:2004 Metallic products - Types of inspection documents
EN ISO 3651-2 : 1998 DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
ISO 9001:2015 Quality management systems — Requirements
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10061:2003 Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10059:2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10055:1995 Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
EN 10302:2008 Creep resisting steels, nickel and cobalt alloys
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 14284:1996 Steel and iron — Sampling and preparation of samples for the determination of chemical composition
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels

View more information
$157.92
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more