I.S. EN 1307:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
24-01-2020
17-05-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Description of levels of use
5 Identification requirements
6 Basic requirements
7 Level of use classification
8 Classification of Pile Carpets
9 Classification for flat needled floor coverings
10 Classification for needled floor coverings with pile
11 Classification of textile floor coverings without pile, except needled
12 Classification for flocked carpets
13 Luxury rating requirements
14 Additional Performance Properties
15 Report
16 Symbols
Annex A (normative) Requirements for carpet tiles
Annex B (normative) Summary of test report
Annex C (normative) Criteria for the assessment of stair suitability
Annex D (informative) Impact sound insulation
Annex E (normative) Determination of work of compression of underlay
Annex F (normative) Flocked floor coverings – Blade test
Annex G (normative) Flocked floor coverings – Water Impermeability Test
Bibliography
Defines the requirements for classification of all textile floor coverings and carpet tiles, excluding rugs and runners into use classes with regard to one or more of the following properties: wear, appearance retention, additional performance properties and classes for luxury rating.
| Committee |
TC 134
|
| DevelopmentNote |
Supersedes I.S. EN 13297, I.S. EN 1470 & I.S. EN 15114. (05/2014) 2014 Edition Re-Issued in April 2018 & incorporates AMD 2 2018. (04/2018)
|
| DocumentType |
Standard
|
| Pages |
38
|
| ProductNote |
NOTE: The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document.
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 1307:2014+A2:2018 | Identical |
| UNE-EN 1307:2014 | Identical |
| NBN EN 1307 : 2014 + A1 2016 | Identical |
| UNI EN 1307 : 2014 | Identical |
| EN 1307:2014 | Identical |
| SN EN 1307 : 2014 + A1 2016 | Identical |
| BS EN 1307 : 2014 | Identical |
| DIN EN 1307:2016-05 | Identical |
| NF EN 1307 : 2014 + A2 2018 | Identical |
| NS EN 1307 : 2014 + A2 2018 | Identical |
| NEN EN 1307 : 2014 + A2 2018 | Identical |
| ONORM EN 1307 : 2018 | Identical |
| ISO 105-E01:2013 | Textiles — Tests for colour fastness — Part E01: Colour fastness to water |
| EN ISO 10874:2012 | Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) |
| ISO 4919:2012 | Carpets — Determination of tuft withdrawal force |
| EN 1269:2015 | Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test |
| ISO 2551:1981 | Machine-made textile floor coverings Determination of dimensional changes due to the effects of varied water and heat conditions |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| ISO 1957:2000 | Machine-made textile floor coverings Selection and cutting of specimens for physical tests |
| ISO 1766:1999 | Textile floor coverings Determination of thickness of pile above the substrate |
| EN 985:2001 | Textile floor coverings - Castor chair test |
| ISO 10361:2015 | Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
| EN 994:2012 | Textile floor coverings - Determination of the side length, squareness and straightness of tiles |
| ISO 10965:2011 | Textile floor coverings Determination of electrical resistance |
| ISO 3018:1974 | Textile floor coverings — Rectangular textile floor coverings — Determination of dimensions |
| ISO 8543:1998 | Textile floor coverings Methods for determination of mass |
| ISO 6356:2012 | Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
| EN ISO 105-A01:2010 | Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) |
| EN 984:2001 | Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings |
| ISO 2076:2013 | Textiles Man-made fibres Generic names |
| EN ISO 24345 : 2012 | RESILIENT FLOOR COVERINGS - DETERMINATION OF PEEL RESISTANCE (ISO 24345:2006) |
| EN 995:1995 | Textile floor coverings - Assessment of the creep of the backings |
| ISO 3415:1986 | Textile floor coverings — Determination of thickness loss after brief, moderate static loading |
| ISO 8302:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
| CEN/TS 15398:2008 | Resilient, textile and laminate floor coverings - Floor covering standard symbols |
| CEN/TS 14472-2:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 2: Textile floor coverings |
| EN ISO 10140-3:2010/A1:2015 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION (ISO 10140-3:2010/AMD 1:2015) |
| EN 986:2005 | Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane |
| ISO 10361:2012 | Textile floor coverings Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN ISO 105-X12:1995 | Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:1993) |
| ISO 2424:2007 | Textile floor coverings Vocabulary |
| ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
| EN 1471:1996/A1:2003 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE |
| ISO 139:2005 | Textiles Standard atmospheres for conditioning and testing |
| CEN/TS 14472-1:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General |
| EN ISO 139:2005/A1:2011 | Textiles - Standard atmospheres for conditioning and testing - Amendment 1 (ISO 139:2005/AMD 1:2011) |
| ISO 105-A01:2010 | Textiles Tests for colour fastness Part A01: General principles of testing |
| EN ISO 105-E01:2013 | Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2013) |
| EN ISO 105-X12:2016 | Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2016) |
| EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| ISO 10140-3:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation |
| ISO 11856:2014 | Textile floor coverings Test methods for the determination of fibre bind using a Modified Martindale Machine |
| ISO 6938:2012 | Textiles — Natural fibres — Generic names and definitions |
| EN 1814:2005 | Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test |
| CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element |
| ISO 24345:2006 | Resilient floor coverings Determination of peel resistance |
| ISO 10874:2009 | Resilient, textile and laminate floor coverings Classification |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
| ISO 1765:1986 | Machine-made textile floor coverings — Determination of thickness |
| ISO 1763:1986 | Carpets Determination of number of tufts and/or loops per unit length and per unit area |
| EN 1963:2007 | Textile floor coverings - Tests using the Lisson Tretrad Machine |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.