Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

I.S. EN 14906:2012

Current
Current

The latest, up-to-date edition.

LEATHER - LEATHER FOR AUTOMOTIVE - TEST METHODS AND TESTING PARAMETERS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2012

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General principles
5 Sampling
6 Conditioning and sampling preparation
7 List of test methods
8 Test reports
Bibliography

Provides guidelines to select the test methods to assess the performance of leather for automotive.

DevelopmentNote
Supersedes I.S. CEN/TS 14906. (06/2012)
DocumentType
Standard
Pages
13
PublisherName
National Standards Authority of Ireland
Status
Current
Supersedes

Standards Relationship
EN 14906:2012 Identical

EN ISO 3377-1:2011 Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2011)
VDA 230-205 : 2005 AUTOMOTIVE LEATHER - DETERMINATION LOOSE GRAIN EFFECT
EN ISO 17186:2011 Leather - Physical and mechanical tests - Determination of surface coating thickness (ISO 17186:2011)
ISO 2588:2014 Leather Sampling Number of items for a gross sample
EN ISO 3376:2011 Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011)
ISO 15701:2015 Leather — Tests for colour fastness — Colour fastness to migration into polymeric material
ISO 105-B06:1998 Textiles Tests for colour fastness Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
ISO 11644:2009 Leather — Test for adhesion of finish
ISO 26082-1:2012 Leather Physical and mechanical test methods for the determination of soiling Part 1: Rubbing (Martindale) method
ISO 9237:1995 Textiles — Determination of the permeability of fabrics to air
EN ISO 4044:2017 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2017)
EN ISO 9237 : 1995 TEXTILES - DETERMINATION OF PERMEABILITY OF FABRICS TO AIR
EN ISO 15701:2015 Leather - Tests for colour fastness - Colour fastness to migration into polymeric material (ISO 15701:2015)
VDA 278 : 2011 THERMAL DESORPTION ANALYSIS OF ORGANIC EMISSIONS FOR THE CHARACTERIZATION OF NON-METALLIC MATERIALS FOR AUTOMOBILES
EN ISO 2589:2016 Leather - Physical and mechanical tests - Determination of thickness (ISO 2589:2016)
ISO 17071:2006 Leather — Physical and mechanical tests — Determination of fogging characteristics
EN 15987:2015 Leather - Terminology - Key definitions for the leather trade
ISO 14268:2012 Leather — Physical and mechanical tests — Determination of water vapour permeability
ISO 5402-1:2017 Leather Determination of flex resistance Part 1: Flexometer method
ISO 2418:2017 Leather — Chemical, physical and mechanical and fastness tests — Sampling location
EN ISO 15700:1999 Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998)
EN ISO 2418:2017 Leather - Chemical, physical and mechanical and fastness test - Sampling location (ISO 2418:2017)
EN ISO 11640:2012 Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012)
ISO 23910:2017 Leather — Physical and mechanical tests — Measurement of stitch tear resistance
EN ISO 17071:2011 Leather - Physical and mechanical tests - Determination of fogging characteristics (ISO 17071:2006)
EN ISO 14087:2011 Leather - Physical and mechanical tests - Determination of bending force (ISO 14087:2011)
ISO 4044:2017 Leather — Chemical tests — Preparation of chemical test samples
ISO 2589:2016 Leather Physical and mechanical tests Determination of thickness
ISO 17076-2:2011 Leather — Determination of abrasion resistance — Part 2: Martindale ball plate method
EN ISO 17226-3:2011 Leather - Chemical determination of formaldehyde content - Part 3: Determination of formaldehyde emissions from leather (ISO 17226-3:2011)
VDA 277 : 1995 NICHTMETALLISCHE WERKSTOFFE DER KFZ-INNENAUSSTATTUNG - BESTIMMUNG DER EMISSION ORGANISCHER VERBINDUNGEN
EN ISO 105-B06 : 2004 TEXTILES - TESTS FOR COLOUR FASTNESS - PART B06: COLOUR FASTNESS AND AGEING TO ARTIFICIAL LIGHT AT HIGH TEMPERATURES: XENON ARC FADING LAMP TEST
ISO 2420:2017 Leather — Physical and mechanical tests — Determination of apparent density and mass per unit area
ISO 11640:2012 Leather Tests for colour fastness Colour fastness to cycles of to-and-fro rubbing
EN ISO 11644:2009 Leather - Test for adhesion of finish (ISO 11644:2009)
EN ISO 14268:2012 Leather - Physical and mechanical tests - Determination of water vapour permeability (ISO 14268:2012)
ISO 17227:2002 Leather — Physical and mechanical tests — Determination of dry heat resistance of leather
VDA 270 : 2016 DETERMINATION OF THE ODOUR CHARACTERISTICS OF TRIM MATERIALS IN MOTOR VEHICLES
EN ISO 17074:2011 Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame (ISO 17074:2006)
EN ISO 17228:2015 LEATHER - TESTS FOR COLOUR FASTNESS - CHANGE IN COLOUR WITH ACCELERATED AGEING (ISO 17228:2015)
EN ISO 2419:2012 Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2012)
ISO 17186:2011 Leather — Physical and mechanical tests — Determination of surface coating thickness
EN 20105-A02 : 1994 TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREYSCALE FOR ASSESSING CHANGE IN COLOUR (ISO 105-A02:1993)
ISO 14087:2011 Leather — Physical and mechanical tests — Determination of bending force
ISO 105-A02:1993 Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
ISO 17226-3:2011 Leather — Chemical determination of formaldehyde content — Part 3: Determination of formaldehyde emissions from leather
ISO 2419:2012 Leather — Physical and mechanical tests — Sample preparation and conditioning
ISO 17074:2006 Leather — Physical and mechanical tests — Determination of resistance to horizontal spread of flame
ISO 15700:1998 Leather — Tests for colour fastness — Colour fastness to water spotting
ISO 3376:2011 Leather Physical and mechanical tests Determination of tensile strength and percentage extension
EN ISO 5402-1:2017 Leather - Determination of flex resistance - Part 1: Flexometer method (ISO 5402-1:2017)
VDA 230-206 : 2007 EXAMINATION OF THE STICK-SLIP BEHAVIOUR OF MATERIAL PAIRS PART 1 TO 3
EN ISO 2420:2017 Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017)
EN ISO 17076-2:2011 Leather - Determination of abrasion resistance - Part 2: Martindale ball plate method (ISO 17076-2:2011)
ISO 17228:2015 Leather Tests for colour fastness Change in colour with accelerated ageing
ISO 3377-1:2011 Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear
EN ISO 23910:2017 Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2017)

View more information
$50.25
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more