PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2013

Publisher

National Standards Authority of Ireland

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Types of regulating devices
5 Constructional characteristics
6 Performance characteristics
7 Test methods
8 Marking, packaging, instructions
Annex A (normative) - Special requirements for
        devices fitted with pressure or flow rate
        operated safety functions
Annex B (normative) - Special requirements for
        devices fitted with a thermal shut off system
Annex C (normative) - Special requirements for
        devices under extreme temperature
        conditions (temperatures below -20 degrees C)
Annex D (normative) - Regulating devices for gas
        cylinders to supply appliances installed in
        caravans, motor caravans or freshwater
        boats
Annex E (normative) - Complementary test requirements
        for non-metallic thermoplastic or thermal setting
        materials used in the construction of devices
Annex F (normative) - Requirements for elastomeric
        reinforced diaphragms
Annex G (normative) - Inlet connections
Annex H (normative) - Outlet connections
Annex I (informative) - Test method for resistance to
        corrosion
Annex J (informative) - Method for measuring leaks
Annex K (normative) - Special requirements for low
        pressure fixed regulators fitted with two or
        three outlets for outdoor use
Annex L (normative) - Special requirements for regulators
        fitted with an inlet valve
Annex M (normative) - Devices for gas cylinders to supply
        appliances installed in seawater boats
Annex N (normative) - Alternative possible seal
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2009/142/EC (for pressure regulators only)
Bibliography

Specifies the constructional and operational characteristics, the safety requirements, test methods and the marking of regulators and automatic change-over devices having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, for use with butane, propane and their mixtures in the vapour phase.

DevelopmentNote	Supersedes I.S. EN 12864, I.S. EN 13785 & I.S. EN 13786. (07/2013)
DocumentType	Standard
Pages	141
PublisherName	National Standards Authority of Ireland
Status	Current
Supersedes	I.S. EN 12864:2001

Standards	Relationship
EN 16129:2013	Identical

EN 15202:2012	LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
EN 751-3:1996/AC:1997	Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes
ISO 7005-2:1988	Metallic flanges — Part 2: Cast iron flanges
CGA V 1 : 2013	STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS
ISO 8434-1:2007	Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
EN ISO 180:2000/A2:2013	PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013)
EN 10226-2:2005	Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
EN ISO 4892-3:2016	Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
ISO 75:1987	Plastics and ebonite Determination of temperature of deflection under load
ISO 565:1990	Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
EN 751-2:1996	Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
EN 561:2002	Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes
EN ISO 178:2010/A1:2013	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
EN 560:2005/AC:2007	GAS WELDING EQUIPMENT - HOSE CONNECTIONS FOR EQUIPMENT FOR WELDING, CUTTING AND ALLIED PROCESSES
EN ISO 9227:2017	Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
EN 13878 : 2003	LEISURE ACCOMMODATION VEHICLES - TERMS AND DEFINITIONS
EN ISO 3166-1:2014	Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
EN 1774:1997	Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid
EN ISO 228-1:2003	Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
ISO 4628-3:2016	Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
EN ISO 4628-3:2016	Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
EN 437:2003+A1:2009	Test gases - Test pressures - Appliance categories
ISO 180:2000	Plastics Determination of Izod impact strength
ISO 4892-3:2016	Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
EN 521:2006	Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances
IEC 60695-11-10:2013	Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
EN 751-1:1996	Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
EN 1563:2011	Founding - Spheroidal graphite cast irons
EN ISO 8434-1:2007/AC:2009	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
EN 12164:2016	Copper and copper alloys - Rod for free machining purposes
ISO 9227:2017	Corrosion tests in artificial atmospheres — Salt spray tests
ISO 3166-1:2013	Codes for the representation of names of countries and their subdivisions Part 1: Country codes
EN 12420:2014	Copper and copper alloys - Forgings
ISO 7005-1:2011	Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
EN 12844:1998	Zinc and zinc alloys - Castings - Specifications
EN 549:1994	Rubber materials for seals and diaphragms for gas appliances and gas equipment
EN 12165:2016	COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK
EN 10226-1:2004	Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
ISO 178:2010	Plastics Determination of flexural properties
ISO 228-1:2000	Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation

View more information

$305.05

Including GST where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

I.S. EN 16129:2013

Current

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription