I.S. EN 16734:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
01-02-2020
03-09-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
National Foreword
European foreword
1 Scope
2 Normative references
3 Sampling
4 Pump marking
5 Requirements and test methods
Annex A (normative) - Details of inter-laboratory test programme
Annex B (informative) - A-deviations
Bibliography
Defines requirements and test methods for marketed and delivered automotive B10 diesel fuel, i.e. diesel fuel containing up to 10,0%(V/V) Fatty Acid Methyl Ester. Pertains to fuel for use in diesel engine vehicles compatible with automotive B10 diesel fuel.
Committee |
CEN/TC 19
|
DocumentType |
Standard
|
Pages |
20
|
ProductNote |
The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document.
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
EN 16734:2016 | Identical |
ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
ISO 13759:1996 | Petroleum products — Determination of alkyl nitrate in diesel fuels — Spectrometric method |
CEN/TR 15367-3:2009 | Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination |
EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
ISO 3170:2004 | Petroleum liquids — Manual sampling |
ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
ISO 4264:2007 | Petroleum products Calculation of cetane index of middle-distillate fuels by the four-variable equation |
ISO 5165:1998 | Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
CEN/TR 16982:2016 | Diesel blends and fuels - Cold filterability issues |
EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
EN ISO 12185:1996 | Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
EN 16715 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
ISO 12156-1:2016 | Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
EN ISO 10370:2014 | Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014) |
CEN/TR 15160:2005 | Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests |
EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
EN 15195:2014 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
EN ISO 12205 : 1996 | Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995) |
EN ISO 13032:2012 | Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012) |
EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
EN 14331:2004 | Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method |
CEN/TR 15367-1:2014 | PETROLEUM PRODUCTS - GUIDELINES FOR GOOD HOUSEKEEPING - PART 1: AUTOMOTIVE DIESEL FUELS |
ISO 10370:2014 | Petroleum products — Determination of carbon residue — Micro method |
ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
EN 16576 : 2014 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
EN ISO 3924:2016 | Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2016) |
ISO 20884:2011 | Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry |
CEN/TR 16884:2016 | Automotive fuels - Diesel fuel - Cold operability testing and fuel performance correlation |
PREN 16942 : DRAFT 2016 | FUELS - IDENTIFICATION OF VEHICLE COMPATIBILITY - GRAPHICAL EXPRESSION FOR CONSUMER INFORMATION |
ISO 12205:1995 | Petroleum products — Determination of the oxidation stability of middle-distillate fuels |
ISO 6245:2001 | Petroleum products — Determination of ash |
EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
EN 12662:2014 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
EN ISO 6245:2002 | Petroleum products - Determination of ash (ISO 6245:2001) |
EN ISO 12937:2000 | Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000) |
EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
EN 23015:1994 | Petroleum products - Determination of cloud point (ISO 3015:1992) |
EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
EN ISO 13759:1996 | Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996) |
ISO 20846:2011 | Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method |
EN ISO 20884:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011) |
EN ISO 2160:1998 | Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998) |
EN ISO 20846:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011) |
ISO 13032:2012 | Petroleum products Determination of low concentration of sulfur in automotive fuels Energy-dispersive X-ray fluorescence spectrometric method |
EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
ISO 3015:1992 | Petroleum products — Determination of cloud point |
EN ISO 4259:2006 | Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006) |
ISO 3924:2016 | Petroleum products Determination of boiling range distribution Gas chromatography method |
EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.