Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

I.S. EN 50377-7-3:2004

Current
Current

The latest, up-to-date edition.

CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 7-3: TYPE LC-APC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY B1.1 SINGLEMODE FIBRE
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2004

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

1 Scope
  1.1 Product definition
  1.2 Intermateability
  1.3 Operating environment
  1.4 Reliability
  1.5 Quality assurance
2 Normative references
3 Description
  3.1 Plug
  3.2 Adaptor
  3.3 Materials
  3.4 Dimensions
  3.5 Colour and marking
4 Variants
  4.1 Terminated plug
  4.2 Adaptor
  4.3 Identification of variants
5 Dimensional requirements
  5.1 Outline dimensions
      5.1.1 Plug variants
      5.1.2 Adaptor variants
  5.2 Mating face and other limit dimensions
      5.2.1 Plug
      5.2.2 Ferrule endface geometry after termination
      5.2.3 Positioning of fibre core
      5.2.4 Control of fibre axis
      5.2.5 Adaptor
      5.2.6 Pin gauge for adaptor
6 Tests
  6.1 Sample size
  6.2 Test and measurement methods
  6.3 Test
  6.4 Pass/Fail criteria
7 Test report
8 Testing requirements
  8.1 Dimensional and marking requirements
  8.2 Optical Performance requirements
  8.3 Mechanical Performance requirements
  8.4 Environmental Performance requirements
Annex A (informative) Reference connector details
Annex B (informative) Sample size and product sourcing
        requirements
Bibliography

Covers the initial, start of life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled singlemode resilient alignment sleeve LC-PC duplex connector set (plug/adaptor/plug) must meet in order for it to be categorised as an European Standard product.

DocumentType
Standard
Pages
34
PublisherName
National Standards Authority of Ireland
Status
Current

Standards Relationship
DIN EN 50377-7-3:2004-11 Identical
EN 50377-7-3 : 2004 Identical
BS EN 50377-7-3:2004 Identical
NF EN 50377-7-3 : 2004 Identical
NEN EN 50377-7-3 : 2004 Identical

EN 61300-2-5:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion
EN 61300-2-18:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance
EN 61300-2-1:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
EN 61300-3-4:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation
EN 60794-2:2017 Optical fibre cables - Part 2: Indoor cables - Sectional specification
EN 61300-2-17:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold
EN 61300-2-23:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices
EN 61300-2-2:2009/corrigendum:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-2: TESTS - MATING DURABILITY
EN 61300-2-21:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature/humidity cyclic test
EN 61300-2-6:2011 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism
EN 61300-2-22:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature
ES 200 671 : 1.2.1 TRANSMISSION AND MULTIPLEXING (TM); PASSIVE OPTICAL COMPONENTS; OPTICAL FIBRE CONNECTORS FOR SINGLE MODE OPTICAL FIBRE COMMUNICATION SYSTEMS; COMMON REQUIREMENTS AND CONFORMANCE TESTING
EN 61300-3-6:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss
EN 61300-2-12:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact
EN 61300-2-4:1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention
EN 61300-2-42:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief
IEC 61754-20:2012 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20: Type LC connector family
EN 61753-1-1:2001 Fibre optic interconnecting devices and passive components performance standard - Part 1-1: General and guidance - Interconnecting devices (connectors)
EN 61300-2-19:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state)
EN 61300-3-34:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors
EN 61300-2-26:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist
EN 61300-2-7:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment
EN 61754-20:2012 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20: Type LC connector family
EN 61300-2-27:1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow

View more information
$114.84
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more