Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

I.S. EN 60107-1:1999

Current
Current

The latest, up-to-date edition.

METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSION - PART 1: GENERAL CONSIDERATIONS - MEASUREMENTS ON DISPLAYS AT RADIO AND VIDEO FREQUENCIES
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-1999

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

FOREWORD
1 General
   1.1 Scope
   1.2 Normative references
2 General explanation of terms
   2.1 Definitions
   2.2 Types of receivers
   2.3 Peripheral connectors
3 General notes on measurement
   3.1 General conditions
   3.2 Test signals
   3.3 Radiofrequency (r.f.) television signal
   3.4 Radiofrequency (r.f.) input signals
   3.5 Measuring system and test instruments
   3.6 Standard measuring conditions
4 Initial tests under general operating conditions
   4.1 Electrical and mechanical performance
   4.2 Power consumption
5 Characteristics of radiofrequency channel
   5.1 Tuning characteristics
   5.2 Sensitivity
   5.3 Selectivity and response to undesired signals
6 Characteristics of luminance and chrominance channels
   6.1 Characteristics of the luminance and chrominance channels
   6.2 Characteristics of chrominance channels
   6.3 Demodulation characteristics of chrominance signals inherent
       in each colour system (NTSC, PAL and SECAM)
7 Characteristics of displayed pictures
   7.1 General properties of the picture
   7.2 Synchronizing quality
   7.3 Picture size stability versus changes of CRT beam current
   7.4 Characteristics inherent in projection type displays
   7.5 Characteristics inherent in LCD displays
   7.6 Characteristics inherent in widescreen displays
8 Characteristics inherent in the receivers using double-rate
   scan displays
   8.1 General
9 Disturbance on the picture due to signals inserted into the
   field blanking interval
   9.1 Introduction
   9.2 Method of measurement
   9.3 Presentation of results
10 Characteristics inherent in teletext signals
   10.1 General
   10.2 General measuring conditions
   10.3 Characteristics of teletext signal
Annexes
A - Analytical description of the offset-carrier colour bar signal
B - Calculation of the relative amplitude and the group delay
    by the response of a modulated sine-squared pulse
C - Bibliography
Annex ZA (normative) Normative references to international
         publications with their corresponding European
         publications

Covers the standard conditions and methods of measurement on television receivers that conform to the terrestrial broadcast television standards specified by the ITU-R.

DevelopmentNote
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
DocumentType
Standard
Pages
418
PublisherName
National Standards Authority of Ireland
Status
Current

Standards Relationship
BS EN 60107-1:1997 Identical
IEC 60107-1:1997 Identical
DIN EN 60107-1:1998-01 Identical
NBN EN 60107-1 : 1997 Identical
EN 60107-1:1997 Identical
NF EN 60107-1 : 1997 Identical
SN EN 60107-1 : 1997 Identical

CISPR 20:2006+AMD1:2013 CSV Sound and television broadcast receivers and associated equipment -Immunity characteristics - Limits and methods of measurement
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
CISPR 13:2009+AMD1:2015 CSV Sound and television broadcast receivers and associated equipment -Radio disturbance characteristics - Limits and methods of measurement
IEC 60107-2:1997 Methods of measurement on receivers for television broadcast transmissions - Part 2: Audio channels - General methods and methods for monophonic channels
IEC 60107-6:1989 Recommended methods of measurement on receivers for television broadcast transmissions. Part 6: Measurements under conditions different from broadcast signal standards
EN 60065:2014/AC:2017-01 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
EN 60107-5:1992/A1:1999 RECOMMENDED METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSION - PART 5: ELECTRICAL MEASUREMENTS ON MULTICHANNEL SOUND TELEVISION RECEIVERS USING THE NICAM TWO-CHANNEL DIGITAL SOUND-SYSTEM
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
IEC 60107-5:1992+AMD1:1999 CSV Recommended methods of measurements on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system
IEC 60933-5:1992 Audio, video and audiovisual systems - Interconnections and matching values - Part 5: Y/C connector for video systems - Electrical matching values and description of the connector
IEC 61079-3:1993 Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Part 3: Electrical measurements of overall performance of receiver systems comprising an outdoor unit and a DBS tuner unit
IEC 60107-3:1988+AMD1:1999 CSV Recommended methods of measurement on receivers for television broadcast transmissions - Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems
IEC 61079-2:1992 Methods of measurement on receivers for satellite broadcasttransmissions in the 12 GHz band - Part 2: Electrical measurementson DBS tuner units
EN 60933-5:1993 Audio, video and audiovisual systems - Interconnections and matching values - Part 5: Y/C connector for video systems - Electrical matching values and description of the connector
IEC 60569:1977 Informative guide for subjective tests on television receivers
EN 60107-2:1997/corrigendum:1997 METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSIONS - AUDIO CHANNELS - GENERAL METHODS AND METHODS FOR MONOPHONIC CHANNELS
HD 567.6 : 200S1 RECOMMENDED METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSIONS - MEASUREMENT UNDER CONDITIONS DIFFERENT FROM BROADCAST SIGNAL STANDARDS
IEC 61079-1:1992 Methods of measurement on receivers for satellite broadcasttransmissions in the 12 GHz band - Part 1: Radio-frequencymeasurements on outdoor units
IEC 61079-5:1993 Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Part 5: Electrical measurements on decoder units for MAC/packet systems
IEC 60107-4:1988+AMD1:1999 CSV Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system
IEC 60728-1:2014 Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths
IEC 61079-4:1993 Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Part 4: Electrical measurements on sound/data decoder units for the digital subcarrier NTSC system

View more information
$432.47
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more