Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

I.S. EN 60193:2000

Current
Current

The latest, up-to-date edition.

HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES - MODEL ACCEPTANCE TESTS (IEC 60193:1999)
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2000

Preview

FOREWORD
1 General rules
  1.1 Scope and object
  1.2 Normative references
  1.3 Terms, definitions, symbols and units
  1.4 Nature and extent of guarantees related to
       hydraulic performance
2 Execution of tests
  2.1 Requirements of test installation and model
  2.2 Dimensional check of model and prototype
  2.3 Hydraulic similitude, test conditions and test
       procedures
  2.4 Introduction to the methods of measurement
  2.5 Physical properties
3 Main hydraulic performances: methods of measurement and
  results
  3.1 Data acquisition and data processing
  3.2 Discharge measurement
  3.3 Pressure measurement
  3.4 Free water level measurement
  3.5 Determination of E and NPSE
  3.6 Shaft torque measurement
  3.7 Rotational speed measurement
  3.8 Computation of test results
  3.9 Error analysis
  3.10 Comparison with guarantees
4 Additional performance data - Methods of measurement
  and results
  4.1 Introduction to additional data measurement
  4.2 Data acquisition and processing for measurement of
       fluctuating quantities
  4.3 Pressure fluctuations
  4.4 Shaft torque fluctuations
  4.5 Axial and radial thrust
  4.6 Hydraulic loads on control components
  4.7 Testing in an extended operating range
  4.8 Differential pressure measurement in view of
       prototype index test
Annex A (informative) - Dimensionless terms
Annex B (normative) - Physical properties, data
Annex C (informative) - Derivation of the equation for the
                        specific hydraulic energy of a
                        machine
Annex D (informative) - Influence of the density of actual
                        water rho[wa] on measurement and calibration
Annex E (informative) - Summarized test and calculation procedure
Annex F (normative) - Scale-up of the hydraulic efficiency of
                      reaction machines
Annex G (normative) - Computation of the prototype runaway
                      characteristics taking into account
                      friction and windage losses of the unit
Annex H (informative) - Example of determination of the best
                        smooth curve: method of separate segments
Annex J (informative) - Examples analysis of sources of error and
                        uncertainty evaluation
Annex K (normative) - Efficiency scale-up for Pelton turbines
Annex L (normative) - Analysis of random uncertainties for a
                      test at constant operating conditions
Annex M (normative) - Calculation of plant Thoma number sigma[pl]
Annex N (informative) - Detailed flux diagram of specific
                        hydraulic energy, flow and power
Annex P (informative) - Bibliography
Annex ZA (normative) - Normative references to international
                       publications with their corresponding
                       European publications

Pertains to laboratory models of any type of impulse or reaction hydraulic turbine, storage pump or pump-turbine.

DevelopmentNote
Supersedes I.S. EN 60995. (04/2015) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
DocumentType
Standard
Pages
297
PublisherName
National Standards Authority of Ireland
Status
Current

Standards Relationship
IEC 60193:1999 Identical
BS EN 60193:1999 Identical
SN EN 60193 : 1999 Identical
EN 60193:1999 Identical
NBN EN 60193 : 2000 Identical
NF EN 60193 : 2000 Identical
UNE-EN 60193:2002 Identical

EN 24185:1993/AC:1993 MEASUREMENT OF LIQUID FLOW IN CLOSED CONDUITS - WEIGHING METHOD
ISO 7066-2:1988 Assessment of uncertainty in the calibration and use of flow measurement devices — Part 2: Non-linear calibration relationships
ISO 5168:2005 Measurement of fluid flow — Procedures for the evaluation of uncertainties
ISO 4373:2008 Hydrometry Water level measuring devices
EN 29104 : 1993 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS
EN 24006:1993 Measurement of fluid flow in closed conduits - Vocabulary and symbols (ISO 4006:1991)
EN 60609-2:1999 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2: Evaluation in Pelton turbines
EN ISO 6817:1995 Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992)
IEC TR 61364:1999 Nomenclature for hydroelectric powerplant machinery
ISO 7066-1:1989 Assessment of uncertainty in the calibration and use of flow measurement devices Part 1: Linear calibration relationships
ISO 2533:1975 Standard Atmosphere
IEC 60041:1991 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
EN 60041:1994 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
ISO 8316:1987 Measurement of liquid flow in closed conduits Method by collection of the liquid in a volumetric tank
ISO 468:1982 Surface roughness — Parameters, their values and general rules for specifying requirements
ISO 6817:1992 Measurement of conductive liquid flow in closed conduits Method using electromagnetic flowmeters
ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements
IEC 60609:1978 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines
ISO 2186:2007 Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements
ISO 4006:1991 Measurement of fluid flow in closed conduits — Vocabulary and symbols
ISO 31-12:1992 Quantities and units Part 12: Characteristic numbers
ISO 9104:1991 Measurement of fluid flow in closed conduits Methods of evaluating the performance of electromagnetic flow-meters for liquids
IEC 60609-2:1997 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2: Evaluation in Pelton turbines
EN 60994:1992 Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)
EN ISO 8316:1995 Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1987)

View more information
$515.01
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more