Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

I.S. EN 61858-1:2014

Current
Current

The latest, up-to-date edition.

ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED ELECTRICAL INSULATION SYSTEM (EIS) - PART 1: WIRE-WOUND WINDING EIS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2014

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General considerations
5 Substitution of phase or ground insulation
6 Substitution of winding wire
7 Substitution of impregnating resin/varnish
8 Substitution with other EIM
9 Evaluation of additions
10 Chemical compatibility of a combination of materials
11 Single-point thermal ageing test (procedure C)
12 Full thermal aging test (procedure D)
Annex A (normative) - Classes of winding wire
Annex B (informative) - Visual representations of coils
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications

Defines the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification.

DevelopmentNote
Supersedes I.S. EN 61858. (08/2014) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
DocumentType
Standard
Pages
76
PublisherName
National Standards Authority of Ireland
Status
Current
Supersedes

Standards Relationship
EN 61858-1:2014 Identical

IEC 60317-35:2013 Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
IEC 60317-3:2004+AMD1:2010 CSV Specifications for particular types of winding wires - Part 3: Polyester enamelled round copper wire, class 155
EN 60317-34 : 1997 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - POLYESTER ENAMELLED ROUND COPPER WIRE, CLASS 130
IEC 60317-42:1997+AMD1:2010 CSV Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper wire, class 200
EN 60085:2008 Electrical insulation - Thermal evaluation and designation
EN 60317-50 : 2012 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 50: GLASS-FIBRE WOUND SILICONE RESIN OR VARNISH IMPREGNATED, BARE OR ENAMELLED ROUND COPPER WIRE, TEMPERATURE INDEX 200
IEC 60317-50:2012 Specifications for particular types of winding wires - Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
IEC 60317-15:2004+AMD1:2010 CSV Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180
IEC 60317-12:2010 Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
IEC 60317-51:2014 Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180
IEC 60317-4:2015 Specifications for particular types of winding wires - Part 4: Solderable polyurethane enamelled round copper wire, class 130
IEC 60317-21:2013 Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
IEC 60317-57:2010 Specifications for particular types of winding wires - Part 57: Polyamide-imide enameled round copper wire, class 220
IEC 60317-19:1990+AMD1:1997+AMD2:1999 CSV Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelled round copper wire, overcoated with polyamide, class 130
EN 61857-21:2009 ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 21: SPECIFIC REQUIREMENTS FOR GENERAL-PURPOSE MODELS - WIRE-WOUND APPLICATIONS
IEC 60317-8:2010 Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180
IEC 61857-21:2009 Electrical insulation systems - Procedures for thermal evaluation - Part 21: Specific requirements for general-purpose models - Wire-wound applications
EN 60317-25:2010 Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
EN 60317-46:2014 Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240
IEC 60317-34:1997 Specifications for particular types of winding wires - Part 34: Polyester enamelled round copper wire, class 130L
IEC 60505:2011 Evaluation and qualification of electrical insulation systems
EN 60317-12:2010 Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
IEC 62317-2:2010 Ferrite cores - Dimensions - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
IEC 60317-23:2013 Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180
IEC 60172:2015 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
IEC 61857-1:2008 Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage
EN 60317-21:2014 Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155
EN 60317-13:2010 Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
EN 61033 : 2006 TEST METHODS FOR THE DETERMINATION OF BOND STRENGTH OF IMPREGNATING AGENTS TO AN ENAMELLED WIRE SUBSTRATE
IEC 60317-38:2013 Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer
IEC 60317-37:2013 Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer
EN 60317-19:1995/A2:2000 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 19: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 130
EN 60317-53:2014 Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220
IEC 60317-13:2010 Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
EN 60317-35:2014 Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
EN 60317-48:2012 Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
IEC 60317-2:2012 Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer
EN 60172:2015 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
IEC 60317-36:2013 Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
EN 60317-2:2012 Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer
IEC 60317-53:2014 Specifications for particular types of winding wires - Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220
IEC 60317-20:2013 Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
IEC 60034-18-21:2012 Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification
IEC 60317-48:2012 Specifications for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155
IEC 60317-1:2010 Specifications for particular types of winding wires - Part 1: Polyvinyl acetal enamelled round copper wire, class 105
EN 60317-43:1997/A1:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 43: AROMATIC POLYIMIDE TAPE WRAPPED ROUND COPPER WIRE, CLASS 240
IEC 60317-25:2010 Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
EN 60317-38:2014 Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer
IEC 60317-22:2004+AMD1:2009 CSV Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
EN 62317-2:2010/corrigendum:2010 FERRITE CORES - DIMENSIONS - PART 2: POT-CORES FOR USE IN TELECOMMUNICATIONS, POWER SUPPLY, AND FILTER APPLICATIONS
EN 60317-20:2014 Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155
IEC 60317-46:2013 Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240
EN 60317-8:2010 Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180
EN 60317-22:2004/A1:2010 Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
EN 60317-55:2014 Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, Class 180
IEC 60317-55:2013 Specifications for particular types of winding wires - Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180
IEC 60317-43:1997+AMD1:2010 CSV Specifications for particular types of winding wires - Part 43: Aromatic polyimide type wrapped round copper wire, class 240
IEC 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
EN 60317-23:2014 Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180
EN 60317-36:2014 Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
EN 60505:2011/AC:2017-03 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017)
EN 60317-42:1997/A1:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 42: POLYESTER-AMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
IEC 60317-54:2001 Specifications for particular types of winding wires - Part 54: Polyester enamelled round copper wire, class 155L
EN 60317-26:1996/A2:2010 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 26: POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
IEC 61033:1991 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
EN 60317-37:2014 Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer
EN 60317-51:2014 Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180
EN 61857-1:2009 Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage
EN 60317-4:1994/A2:2000 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 4: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 130
EN 60317-57:2010 Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220

View more information
$105.88
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more