Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

I.S. EN ISO 10440-1:2007

Current
Current

The latest, up-to-date edition.

PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2007

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General
  4.1 Pressure design code
  4.2 Unit responsibility
  4.3 Units of measurement
  4.4 Statutory requirements
5 Basic design
  5.1 General
  5.2 Pressure casing
  5.3 Casing connections
  5.4 External forces and moments
  5.5 Rotating element
  5.6 Shaft seals
  5.7 Dynamics
  5.8 Bearings
  5.9 Bearing housings
  5.10 Lube-oil and seal-oil systems
  5.11 Materials
  5.12 Nameplates and rotation arrows
  5.13 Quality
6 Accessories
  6.1 Drivers
  6.2 Couplings and guards
  6.3 Mounting plates
  6.4 Controls and instrumentation
  6.5 Piping
  6.6 Intercoolers and aftercoolers
  6.7 Inlet air filters
  6.8 Inlet separators
  6.9 Pulsation suppressors/silencers for dry screw
       compressors
  6.10 Special tools
7 Inspection, testing and preparation for shipment
  7.1 General
  7.2 Inspection
  7.3 Testing
  7.4 Preparation for shipment
8 Vendor's data
  8.1 General
  8.2 Proposals
  8.3 Contract data
Annex A (informative) Typical datasheets
Annex B (informative) Nomenclature for rotary-type
        positive-displacement compressors
Annex C (normative) Forces and moments
Annex D (normative) Procedure for determination of
        residual unbalance
Annex E (normative) Typical schematics for pressurized oil
        systems for flooded screw compressors
Annex F (informative) Materials and their specifications for
        rotary compressors
Annex G (informative) Typical mounting plate arrangements
Annex H (informative) Inspector's checklist
Annex I (informative) Typical vendor drawing and data
        requirements
Bibliography

Describes requirements for dry and oil-flooded, helical-lobe rotary compressors used for vacuum or pressure or both in petroleum, petrochemical, and gas industry services.

DocumentType
Standard
Pages
290
PublisherName
National Standards Authority of Ireland
Status
Current
Supersedes

ISO 15649:2001 Petroleum and natural gas industries — Piping
API 500 : 2012 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
ABMA 9 : 2015 LOAD RATINGS AND FATIGUE LIFE FOR BALL BEARINGS
ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
API 661 : 2015 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS
API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
IEEE 841-2009 IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp)
ISO 16812:2007 Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers
ISO 10437:2003 Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications
ASTM A 395/A395M : 1999 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
ISO 1328-1:2013 Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
AGMA ISO 1328 1 : B2014 CYLINDRICAL GEARS - ISO SYSTEM OF FLANK TOLERANCE CLASSIFICATION - PART 1: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO FLANKS OF GEAR TEETH
ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
API 614 : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
ASTM A 516/A516M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ISO 1940-1:2003 Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
ISO 6708:1995 Pipework components Definition and selection of DN (nominal size)
ISO 10440-2:2001 Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free)
ISO 281:2007 Rolling bearings Dynamic load ratings and rating life
ISO 1217:2009 Displacement compressors Acceptance tests
ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
API 670 : 2014 MACHINERY PROTECTION SYSTEMS
ASTM A 563 : 2015 : REDLINE Standard Specification for Carbon and Alloy Steel Nuts
ISO 8821:1989 Mechanical vibration Balancing Shaft and fitment key convention
ANSI S2.19 : 0 MECHANICAL VIBRATION - BALANCE QUALITY REQUIREMENTS OF RIGID ROTORS - PART 1: DETERMINATION OF PERMISSIBLE RESIDUAL UNBALANCE, INCLUDING MARINE APPLICATIONS
API 660 : 2015 SHELL-AND-TUBE HEAT EXCHANGERS
ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
EN 1563:2011 Founding - Spheroidal graphite cast irons
API 526 : 2017 FLANGED STEEL PRESSURE-RELIEF VALVES
ASTM A 105/A105M : 2014-11 SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS
API 612 : 2014 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS
ISO 261:1998 ISO general purpose metric screw threads General plan
API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
ISO 5753:1991 Rolling bearings — Radial internal clearance
API 686 : 2009 RECOMMENDED PRACTICE FOR MACHINERY INSTALLATION AND INSTALLATION DESIGN
NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
ISO 13706:2011 Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers
ABMA 20 : 2011 RADIAL BEARINGS OF BALL, CYLINDRICAL ROLLER AND SPHERICAL ROLLER TYPES - METRIC DESIGN
API 683 : 1993 QUALITY IMPROVEMENT MANUAL FOR MECHANICAL EQUIPMENT IN PETROLEUM, CHEMICAL, AND GAS INDUSTRIES
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
ISO 10441:2007 Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications
ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
AWS D1.1/D1.1M : 2015 STRUCTURAL WELDING CODE-STEEL
ASTM A 515/A515M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
ASTM A 312/A312M : 2017-03 SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
API 619 : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
ABMA 7 : 1995 SHAFT AND HOUSING FITS FOR METRIC RADIAL BALL AND ROLLER BEARINGS (EXCEPT TAPERED ROLLER BEARINGS) CONFORMING TO BASIC BOUNDARY PLAN
EN 1561:2011 Founding - Grey cast irons
ISO 945:1975 Cast iron — Designation of microstructure of graphite

View more information
$515.01
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more