|
UL 181B : 3
|
CLOSURE SYSTEMS FOR USE WITH FLEXIBLE AIR DUCTS AND AIR CONNECTORS |
|
NFPA 91 : 2015
|
EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
|
UL 268A : 4
|
SMOKE DETECTORS FOR DUCT APPLICATION |
|
NFPA 262 : 2015
|
METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR-HANDLING SPACES |
|
UL 103 : 2011
|
FACTORY-BUILT CHIMNEYS FOR RESIDENTIAL TYPE AND BUILDING HEATING APPLIANCES |
|
UL 555 : 7
|
FIRE DAMPERS |
|
UL 555C : 4
|
CEILING DAMPERS |
|
ASTM F 876 : 2017 : REDLINE
|
SPECIFICATION FOR CROSSLINKED POLYETHYLENE (PEX) TUBING |
|
AWWA C153/A21.53 : 2011
|
DUCTILE-IRON COMPACT FITTINGS |
|
ASTM D 2467 : 2015 : REDLINE
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
|
UL 1453 : 6
|
ELECTRIC BOOSTER AND COMMERCIAL STORAGE TANK WATER HEATERS |
|
UL 896:5ED 1993-07
|
Oil-Burning Stoves |
|
UL 731 : 5
|
OIL-FIRED UNIT HEATERS |
|
UL 732 : 5
|
OIL-FIRED STORAGE TANK WATER HEATERS |
|
UL 1812 : 4
|
DUCTED HEAT RECOVERY VENTILATORS |
|
UL 1046 : 4
|
GREASE FILTERS FOR EXHAUST DUCTS |
|
NFPA 31 : 2016
|
INSTALLATION OF OIL-BURNING EQUIPMENT |
|
UL 791 : 5
|
RESIDENTIAL INCINERATORS |
|
UL 710 : 6
|
EXHAUST HOODS FOR COMMERCIAL COOKING EQUIPMENT |
|
UL 858 : 2016
|
HOUSEHOLD ELECTRIC RANGES |
|
UL 1240 : 4
|
ELECTRIC COMMERCIAL CLOTHES-DRYING EQUIPMENT |
|
ASTM F 439 : 2013 : REDLINE
|
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
|
NFPA 58 : 2017
|
LIQUEFIED PETROLEUM GAS CODE |
|
NFPA 96 : 2017
|
VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS |
|
UL 1820 : 4
|
FIRE TEST OF PNEUMATIC TUBING FOR FLAME AND SMOKE CHARACTERISTICS |
|
NFPA 30A : 2018
|
MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
|
NFPA 853 : 2010
|
INSTALLATION OF STATIONARY FUEL CELL POWER SYSTEMS |
|
UL 710B : 2
|
RECIRCULATING SYSTEMS |
|
ASTM F 493 : 2014 : REDLINE
|
Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
|
ASTM F 438 : 2017 : REDLINE
|
Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
|
UL 2162 : 2
|
COMMERCIAL WOOD-FIRED BAKING OVENS - REFRACTORY TYPE |
|
UL 2043 : 4
|
FIRE TEST FOR HEAT AND VISIBLE SMOKE RELEASE FOR DISCRETE PRODUCTS AND THEIR ACCESSORIES INSTALLED IN AIR-HANDLING SPACES |
|
ANSI/AWWA C115/A21.15 : 2011
|
FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES |
|
ASTM F 441/F441M : 2015 : REDLINE
|
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
|
UL 412 : 5
|
REFRIGERATION UNIT COOLERS |
|
UL 207 : 8
|
Standard for Refrigerant-Containing Components and Accessories, Nonelectrical |
|
ASTM F 2623 : 2015-01
|
SPECIFICATION FOR POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) SDR 9 TUBING |
|
UL 1261 : 6
|
ELECTRIC WATER HEATERS FOR POOLS AND TUBS |
|
UL 875 : 9
|
ELECTRIC DRY-BATH HEATERS |
|
UL 900:8ED 2015-04
|
Air Filter Units |
|
ASTM D 2996 : 2017 : REDLINE
|
Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
|
UL 343:9ED 2008-12
|
Pumps for Oil-Burning Appliances |
|
UL 2200 : 2ED 2012-06
|
STATIONARY ENGINE GENERATOR ASSEMBLIES |
|
AWWA C151/A21.51 : 2017
|
DUCTILE-IRON PIPE, CENTRIFUGALLY CAST |
|
UL 730:5ED 2003-08
|
Oil-Fired Wall Furnaces |
|
UL 2158 : 4
|
ELECTRIC CLOTHES DRYERS |
|
UL 737 : 2010
|
FIREPLACE STOVES |
|
ASTM D 1527 : 1999
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
|
CSA B137.10 : 2009 GEN INS 1 11
|
CROSSLINKED POLYETHYLENE/ALUMINUM/CROSSLINKED POLYETHYLENE (PEX-AL-PEX) COMPOSITE PRESSURE-PIPE SYSTEMS |
|
NFPA 69 : 2014
|
EXPLOSION PREVENTION SYSTEMS |
|
ASTM F 1282 : 2017 : REDLINE
|
Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe |
|
ICC 2012 INTERNATIONAL BUILDING CODE : 2012
|
INTERNATIONAL BUILDING CODE |
|
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012
|
INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
|
NFPA 704 : 2017
|
STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
|
UL 17 : 4
|
VENT OR CHIMNEY CONNECTOR DAMPERS FOR OIL-FIRED APPLIANCES |
|
UL 378 : 4
|
DRAFT EQUIPMENT |
|
AMCA 550 : 2015
|
TEST METHOD FOR HIGH VELOCITY WIND DRIVEN RAIN RESISTANT LOUVERS |
|
UL 471 : 2010-11
|
COMMERCIAL REFRIGERATORS AND FREEZERS |
|
MSS SP 69 : 2003
|
PIPE HANGERS AND SUPPORTS - SELECTION AND APPLICATION |
|
ASTM F 1924 : 2012 : REDLINE
|
Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing |
|
ASTM D 3309 : 1996 : REV A : R2002
|
Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010) |
|
ASHRAE HDBK FUNDAMENTALS : 2013
|
ASHRAE HANDBOOK - FUNDAMENTALS |
|
UL 842 : 2010
|
VALVES FOR FLAMMABLE FLUIDS |
|
ASTM A 254 : 1997
|
Standard Specification for Copper-Brazed Steel Tubing |
|
UL 723 : 2010
|
TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS |
|
UL 508 : 1999
|
INDUSTRIAL CONTROL EQUIPMENT |
|
AHRI 700 : 2015
|
SPECIFICATIONS FOR REFRIGERANTS |
|
WW-P-325 Revision B:1976
|
PIPE, BENDS, TRAPS, CAPS AND PLUGS, LEAD (FOR INDUSTRIAL PRESSURE, AND SOIL AND WASTE APPLICATIONS) |
|
UL 1618 : 2015
|
WALL PROTECTORS, FLOOR PROTECTORS, AND HEARTH EXTENSIONS |
|
ASTM A 420/A420M : 2016 : REDLINE
|
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
|
UL 181 : 2011
|
FACTORY-MADE AIR DUCTS AND AIR CONNECTORS |
|
ASTM D 2683 : 2014 : REDLINE
|
Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing |
|
ICC 2012 INTERNATIONAL FIRE CODE : 2012
|
INTERNATIONAL FIRE CODE |
|
NFPA 8501 : 1997
|
SINGLE BURNER BOILER OPERATION |
|
UL 959 : 9
|
MEDIUM HEAT APPLIANCE FACTORY-BUILT CHIMNEYS |
|
NFPA 92B : 2009
|
SMOKE MANAGEMENT SYSTEMS IN MALLS, ATRIA, AND LARGE SPACES |
|
ASTM D 2513 : 2017-01
|
SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS |
|
ANSI/CSA FC 1:2014
|
FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
|
ASTM F 1281 : 2017 : REDLINE
|
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
|
UL 2024 : 5
|
CABLE ROUTING ASSEMBLIES AND COMMUNICATIONS RACEWAYS |
|
UL 1996 : 4
|
ELECTRIC DUCT HEATERS |
|
ASTM B 88 : 2016 : REDLINE
|
Standard Specification for Seamless Copper Water Tube |
|
UL 499 : 2014
|
ELECTRIC HEATING APPLIANCES |
|
UL 127 : 9
|
FACTORY-BUILT FIREPLACES |
|
UL 2518:1ED 2016-07
|
Air Dispersion Systems |
|
ASTM D 2466 : 2017 : REDLINE
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 |
|
ASHRAE 62.1 : 2016
|
VENTILATION FOR ACCEPTABLE INDOOR AIR QUALITY |
|
UL 867 : 5
|
ELECTROSTATIC AIR CLEANERS |
|
ASTM A 539 : 1999
|
Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines (Withdrawn 2004) |
|
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE |
|
CFR 29(PT1910.1000 TO END) : 0
|
LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
|
AWWA C110/A21.10 : 2012
|
DUCTILE-IRON AND GRAY-IRON FITTINGS |
|
UL 2221 : 2
|
TESTS OF FIRE RESISTIVE GREASE DUCT ENCLOSURE ASSEMBLIES |
|
ASTM D 93 : 2016-07
|
TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
|
ASTM D 2241 : 2015 : REDLINE
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
|
UL 1978 : 4
|
GREASE DUCTS |
|
ASTM D 2468 : 1996 : REV A
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40 (Withdrawn 2003) |
|
UL 1815 : 5
|
NONDUCTED HEAT RECOVERY VENTILATORS |
|
UL 762 : 7
|
POWER ROOF VENTILATORS FOR RESTAURANT EXHAUST APPLIANCES |
|
UL 729:6ED 2003-08
|
Oil-Fired Floor Furnaces |
|
NFPA 72 : 2016
|
NATIONAL FIRE ALARM AND SIGNALING CODE |
|
UL 907 : 4
|
FIREPLACE ACCESSORIES |
|
UL 555S : 5
|
Smoke Dampers |
|
ASHRAE 34 : 2013
|
DESIGNATION AND SAFETY CLASSIFICATION OF REFRIGERANTS |
|
CSA B137.9 : 2009 GEN INS 1 11
|
POLYETHYLENE/ALUMINUM/POLYETHYLENE (PE-AL-PE) COMPOSITE PRESSURE-PIPE SYSTEMS |
|
UL 2158A : 3
|
CLOTHES DRYER TRANSITION DUCT |
|
ASTM F 1055 : 2016-09
|
SPECIFICATION FOR ELECTROFUSION TYPE POLYETHYLENE FITTINGS FOR OUTSIDE DIAMETER CONTROLLED POLYETHYLENE AND CROSSLINKED POLYETHYLENE (PEX) PIPE AND TUBING |
|
ASTM B 43 : 2015 : REDLINE
|
Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
|
ASHRAE/ACCA 180 : 2008
|
STANDARD PRACTICE FOR INSPECTION AND MAINTENANCE OF COMMERCIAL BUILDING HVAC SYSTEMS |
|
UL 586:9ED 2009-08
|
High-Efficiency, Particulate, Air Filter Units |
|
ICC 2012 INT. EXIST. BUILDING CODE : 2012
|
INTERNATIONAL EXISTING BUILDING CODE |
|
NFPA 8502 : 1999
|
PREVENTION OF FURNACE EXPLOSIONS/IMPLOSIONS IN MULTIPLE BURNER BOILERS |
|
UL 641 : 8
|
Standard for Type L Low-Temperature Venting Systems |
|
UL 536 : 2010
|
FLEXIBLE METALLIC HOSE |
|
IIAR 2 : 2014
|
SAFE DESIGN OF CLOSED-CIRCUIT AMMONIA REFRIGERATION SYSTEMS |
|
NFPA 8504 : 1996
|
ATMOSPHERIC FLUIDIZED-BED BOILER OPERATION |
|
ICC 2012 INTERNATIONAL RESI. CODE : 2012
|
INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
|
ASTM D 3350 : 2014 : REDLINE
|
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
|
UL 391 : 5
|
SOLID-FUEL AND COMBINATION-FUEL CENTRAL AND SUPPLEMENTARY FURNACES |
|
NFPA 82 : 2014
|
INCINERATORS AND WASTE AND LINEN HANDLING SYSTEMS AND EQUIPMENT |
|
NFPA 37 : 2018
|
INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
|
ASTM B 813 : 2016 : REDLINE
|
Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube |
|
UL 1995 : 5
|
HEATING AND COOLING EQUIPMENT |
|
UL 923 : 7
|
MICROWAVE COOKING APPLIANCES |
|
UL 263 : 2011
|
FIRE TESTS OF BUILDING CONSTRUCTION AND MATERIALS |
|
UL 181A : 4
|
CLOSURE SYSTEMS FOR USE WITH RIGID AIR DUCTS |
|
UL 1777 : 5
|
CHIMNEY LINERS |
|
NFPA 211 : 2016
|
CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES |
|
ASHRAE 15 : 2013
|
SAFETY STANDARD FOR REFRIGERATION SYSTEMS |
|
ASTM E 2336 : 2016 : REDLINE
|
Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
|
ASTM D 3035 : 2015 : REDLINE
|
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
|
UL 268 : 7
|
SMOKE DETECTORS FOR FIRE ALARM SYSTEMS |
|
ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012
|
INTERNATIONAL FUEL GAS CODE |
|
ICC 2012 INT. ENERGY CONSV. CODE : 2012
|
INTERNATIONAL ENERGY CONSERVATION CODE |
|
UL 2523 : 2
|
SOLID FUEL-FIRED HYDRONIC HEATING APPLIANCES, WATER HEATERS, AND BOILERS |
|
UL 1482 : 7
|
SOLID-FUEL TYPE ROOM HEATERS |
|
ASSE 1017 : 2009
|
PERFORMANCE REQUIREMENTS FOR TEMPERATURE ACTUATED MIXING VALVES FOR HOT WATER DISTRIBUTION SYSTEMS |
|
ASTM D 2447 : 2003
|
Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010) |
|
AWS A5.8 : 1992
|
FILLER METALS FOR BRAZING AND BRAZE WELDING, SPECIFICATION FOR |
|
ASTM D 1693 : 2015 : REDLINE
|
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
|
UL 1887 : 3
|
FIRE TEST OF PLASTIC SPRINKLER PIPE FOR FLAME AND SMOKE CHARACTERISTICS |
|
UL 180 : 8
|
LIQUID-LEVEL GAUGES FOR OIL BURNER FUELS AND OTHER COMBUSTIBLE LIQUIDS |