Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 60068-2-10:2005

Current
Current

The latest, up-to-date edition.

Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French, Spanish, Castilian

Published date

13-06-2005

FOREWORD
1 Scope
2 Normative references
3 General description
4 Health hazards to operators
5 Description of the test variants
   5.1 Test variant 1
   5.2 Test variant 2
6 Reagents and materials
   6.1 Cultures or spores - Supply and conditions
   6.2 Preparation of spore suspension
   6.3 Control strips
7 Description of test apparatus
   7.1 Inoculation by spraying
   7.2 Incubation of small specimens
   7.3 Incubation of large specimens
8 Severities
9 Initial examinations
10 Pre-conditioning
   10.1 Cleaning
   10.2 Damp heat storage
11 Conditioning
   11.1 Application
   11.2 Inoculation
   11.3 Incubation
12 Final examinations
   12.1 Visual examination
   12.2 Effect of growth
   12.3 Extent of growth
13 Information to be given in the relevant specification
14 Information to be given in the test report as a minimum
Annex A (informative) - Danger to personnel
Annex B (normative) - Inoculation methods
Annex C (informative) - Recommended safety precautions
Annex D (informative) - Decontamination procedures
Annex E (informative) - Information on the test fungi
Annex F (informative) - Guidance

IEC 60068-2-10:2005 Provides a test method for determining the extent to which electrotechnical products support mould growth and how any mould growth may affect the performance and other relevant properties of the product. Since mould growth conditions include high relative humidity, the test is applicable to electrotechnical products intended for transportation, storage and use under humid conditions over a period of some days at least. The main changes with respect to the previous edition are listed below:
- Two test fungi replaced by two others
- Concentration of the spores defined for each test fungus
- Spores suspension in mineral salt solution additionally introduced
- Pre-conditioning of the specimens by damp heat storage prescribed
- Supersonic aerosolization of the spores suspension as the preferred inoculation method introduced
- Duration of incubation reduced from 84 days to 56 days
- Extent of mould growth grade 2 split into grade 2a and grade 2b
- Detailed information on methods of inoculation given in Annex B
- Annex E: flow-chart deleted.

Committee
TC 104
DevelopmentNote
Supersedes IEC 60068-2-10A (07/2004) Also numbered as BS 2011-2.1J(1989) (06/2005) Stability date: 2022. (04/2018)
DocumentType
Standard
Pages
71
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

NF EN 60464-2 : 2002 AMD 1 2006 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
DIN EN ISO 16187:2013-12 FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO ASSESS ANTIBACTERIAL ACTIVITY (ISO 16187:2013)
BS ISO 13125:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antifungal activity of semiconducting photocatalytic materials
17/30355772 DC : 0 BS EN 62047-33 ED.1.0 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 33: MEMS PIEZORESISTIVE PRESSURE-SENSITIVE DEVICE
BS EN ISO 16187:2013 Footwear and footwear components. Test method to assess antibacterial activity
02/206181 DC : DRAFT MAY 2002 IEC 61019-1. ED.1 - SURFACE ACOUSTIC WAVE RESONATORS (SAW) OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
UNE-EN ISO 16187:2014 Footwear and footwear components - Test method to assess antibacterial activity (ISO 16187:2013)
CEI CECC 32101-804 : 2002 SPECIFICA DI DETTAGLIO: CONDENSATORI FISSI CERAMICI MULTISTRATO A MONTAGGIO SUPERFICIALE, CLASSE 1, SOTTOCLASSE 1B, TIPO CG, CATEGORIA CLIMATICA 55/125/56, LIVELLO EZ
I.S. EN 61753-111-7:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL
I.S. EN 60684-3-320:2002 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 320: POLYETHYLENE TEREPHTHALATE TEXTILE SLEEVING, LIGHTLY IMPREGNATED
BS CECC 16000-1:1992 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays General
PD CEN ISO/TS 14907-1:2015 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
BS EN 61757-1:2012 Fibre optic sensors Generic specification
15/30325282 DC : 0 BS EN 62884-1 - MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELETIRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
CEI EN 50411-2-8 : 2010 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-8: MICRODUCT CONNECTORS, FOR AIR BLOWN OPTICAL FIBRES, TYPE 1
I.S. EN 61300-2-16:2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-16: TESTS - MOULD GROWTH
02/204831 DC : DRAFT APR 2002 IEC 60505. ED. 3.0 - EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
BS EN 196103:2000 Blank detail specification: Rotary switches. Assessment level Y
04/30112662 DC : DRAFT APR 2004 IEC 61810-7 ED.2 - ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
BS EN 187000:1994 Generic specification for optical fibre cables
BS EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement
BS EN 60684-3-320:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Polyethylene terephthalate textile sleeving, lightly impregnated
BS EN 50411-2-5:2009 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Sealed closures for air blown fibre microduct, type 1, for category S & A
S.R. CEN ISO/TS 14907-1:2015 ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015)
14/30298027 DC : 0 BS EN 61069-4 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE
DD CEN ISO/TS 14907-1:2010 Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures
05/30132097 DC : DRAFT JUNE 2005 IEC 60679-1 ED 3 - QUARTZ CRYSTAL CONTROLLED OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 62134-1:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
I.S. EN 61757-1:2012 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV))
I.S. EN 61810-7:2006 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
CEI CECC 32101-805 : 2002 DETAIL SPECIFICATION: FIXED MULTILAYER CERAMIC SURFACE MOUNTING CAPACITORS, CLASS 2, SUB-CLASSES 2C1 AND 2R1, CLIMATIC CATEGORY 55/125/56, ASSESSMENT LEVEL EZ, WITH FAILURE RATE LEVELS
NF EN 61753-111-8 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
NF EN 61753-111-9 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-9: CLOSURES FOR CATEGORY S - SUBTERRANEAN
UNI EN ISO 16187 : 2013 FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO ASSESS ANTIBACTERIAL ACTIVITY
ISO 16869:2008 Plastics Assessment of the effectiveness of fungistatic compounds in plastics formulations
EN 60684-3-406 to 408:2003 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating
EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment
EN 62134-1:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
EN 60684-3-320:2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated
EN 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
EN 60505:2011/AC:2017-03 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017)
EN 61753-111-9:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-9: Sealed closures for category S - Subterranean
EN 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
EN 60068-3-4:2002 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
EN 50411-2-9:2010 Fibre organisers and closures to be used in optical fibre communications systems - Product specifications - Part 2-9: Non-sealed closures for air blown fibre microduct cable, for category S & A
EN 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
EN 61753-111-7:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-7: Sealed closures for category A - Aerial
DEFSTAN 59-35(PT7)/1(1995) : 1995 CONNECTORS, ELECTRICAL - PART 7: 13 A ALL-INSULATED SEALED TYPES
EN 187000 : 92 AMD 1 95 GENERIC SPECIFICATION: OPTICAL FIBRE CABLES
EN 181000:1994 Generic Specification: Fibre optic branching devices
EN 180000:1995 Generic specification: Fibre optic attenuators
EN 117000:1991 Generic Specification: Solid state all-or-nothing relays of assessed quality - Generic data and methods of test
BS EN 61300-2-16:2006 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests - Mould growth
ENA TS 09-13 : ISSUE 1 AMD 1 1993 PERFORMANCE SPECIFICATION FOR HIGH VOLTAGE HEAT SHRINKABLE COMPONENTS FOR USE WITH HIGH VOLTAGE SOLID TYPES CABLES UP TO AND INCLUDING 33000 VOLTS
EN 60684-3-100 to 105:2001 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving
NF EN 61753-111-7 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIAL
BS EN 196403:2000 Harmonized systems of quality assessment for electronic components. Blank detail specification: push button switches. Assessment level Y
AECTP-230 : 2009 CLIMATIC CONDITIONS
BS EN 61753-111-7:2010 Fibre optic interconnecting devices and passive components performance standard Sealed closures for category A. Aerial
11/30199648 DC : DRAFT MAY 2011 BS ISO 13125 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIFUNGAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS
02/209131 DC : DRAFT JAN 2003 IEC 61811-11 ED.1 - ELECTROMECHANICAL ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 11: BLANK DETAIL SPECIFICATION - RELAYS FOR INDUSTRIAL APPLICATION
BS EN 50411-2-8:2009 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Microduct connectors, for air blown optical fibres, Type 1
DIN EN ISO 16187 E : 2013 FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO ASSESS ANTIBACTERIAL ACTIVITY (ISO 16187:2013)
03/103741 DC : DRAFT FEB 2003 IEC 61338-1 ED.1 - WAVEGUIDE TYPE DIELECTRIC RESONATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
EN 61753-111-8:2010 Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for category G - Ground
NF EN 61020-1 : 2009 ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 60068-3-4:2002 Environmental testing Supporting documentation and guidance - Damp heat tests
BS EN 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality Generic specification
BS EN 50411-2:2008 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors
BS EN 181000:1995 Harmonized system of quality assessment for electronic components. Generic specification. Fibre optic branching devices
04/30122946 DC : DRAFT SEP 2004 IEC 61300-2-16 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-16: TESTS - MOULD GROWTH
CEI EN 61757-1 : 2013 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
IEC TS 62257-3:2015 Recommendations for renewable energy and hybrid systems for rural electrification - Part 3: Project development and management
I.S. EN 60505:2011 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
I.S. EN 61753-111-8:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
I.S. EN 61007:1998 TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - MEASURING METHODS AND TEST PROCEDURES
CEI EN 60068-3-4 : 2002 ENVIRONMENTAL TESTING - PART 3-4: SUPPORTING DOCUMENTATION AND GUIDANCE DAMP HEAT TESTS
ISO 13629-1:2012 Textiles — Determination of antifungal activity of textile products — Part 1: Luminescence method
CEI EN 60684-3-300 : 2003 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 300: GLASS TEXTILE FIBRE SLEEVING, BRAIDED, UNCOATED
I.S. EN 60368-1:2000 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
IEC 61757:2018 Fibre optic sensors - Generic specification
IEC 60794-1:1996 Optical fibre cables - Part1: Generic specification (Revision to IEC 794-1)
BS CECC17000(1992) : 1992 AMD 9626 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - SOLID STATE ALL OR NOTHING RELAYS - GENERIC DATA AND METHODS OF TEST
BS EN 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Generic specification
BS EN 50411-2-9:2010 Fibre organisers and closures to be used in optical fibre communications systems. Product specifications Non-sealed closures for air blown fibre microduct cable, for category S & A
03/309760 DC : DRAFT JUNE 2003 IEC 62257-3 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
09/30198417 DC : DRAFT JAN 2009 BS EN 60505 - EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
11/30241337 DC : DRAFT JAN 2011 BS EN 61757-1 - FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION
03/318812 DC : DRAFT NOV 2003 IEC 62257-3 TS ED.1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
BS EN 60684-3-300:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Glass textile fibre sleeving, braided, uncoated
DIN CEN ISO/TS 14907-1;DIN SPEC 91192:2015-12 ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015)
12/30252220 DC : DRAFT MAR 2012 BS EN 62604-1 - SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS - PART 1: GENERIC SPECIFICATION
13/30279156 DC : 0 BS EN 6101-2-012 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
DD IEC TS 62257-3 : DRAFT 2004 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT
08/30176905 DC : DRAFT JAN 2008 BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
BS EN 60455-2:2015 Resin based reactive compounds used for electrical insulation Methods of test
CEI EN 60368-1 : 2006 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
PD IEC/TS 62257-3:2015 Recommendations for renewable energy and hybrid systems for rural electrification Project development and management
CEI EN 50411-2-9 : 2011 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATIONS SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-9: NON-SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT CABLE, FOR CATEGORY S & A
I.S. EN 50411-2-9:2010 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATIONS SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-9: NON-SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT CABLE, FOR CATEGORY S & A
CEI EN 50411-2 : 2010 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS
BS EN 60684-2:2011 Flexible insulating sleeving Methods of test
NF EN 60684 3-320 : 2003 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS REQUIREMENTS FOR INDIVIDUAL TYPE OF SLEEVING - SHEET 320: POLYETHYLENE TEREPHTHALATE TEXTILE SLEEVING, LIGHTLY IMPREGNATED
BS EN 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) Methods of test
BS EN 60368-1:2000 Piezoelectric filters Generic specification
CEI EN 62884-1 : 1ED 2018 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
UNE-EN 61020-1:2011 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
BS EN 167000:1993 Harmonized system of quality assessment for electronic components. Generic specification: piezoelectric filters
PREN 50411-4-1 : DRAFT 2017 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A
I.S. EN 60455-2:2015 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
I.S. EN 60684-3-406 TO 408:2003 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEETS 406 TO 408: GLASS TEXTILE SLEEVING WITH PVC COATING
CEI EN 61753-111-8 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-8: SEALED CLOSURES FOR CATEGORY G - GROUND
IEC 60300-3-5:2001 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
CEI EN 61086-2 : 2005 COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
I.S. EN 61753-111-9:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN
I.S. EN 62884-1:2017 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
NF EN 62134-1 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
EN ISO 846 : 1997 PLASTICS - EVALUATION OF THE ACTION OF MICROORGANISMS
I.S. EN 60464-2:2002 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
IEC 62103:2003 Electronic equipment for use in power installations
UNE-EN 50491-2:2011 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 2: Environmental conditions
IEC 60684-3-320:2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated
IEC 60368-1:2000+AMD1:2004 CSV Piezoelectric filters of assessed quality - Part 1: Genericspecification
IEC 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
EN 61007:1997 Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
EN ISO 16187:2013 Footwear and footwear components - Test method to assess antibacterial activity (ISO 16187:2013)
BS EN 60684-3-406 to 408:2003 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Glass textile sleeving with PVC coating
CEI EN 50411-2-5 : 2010 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-5: SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT, TYPE 1, FOR CATEGORY S & A
BS CECC 16101:1980 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Electromechanical all-or-nothing relays. Test schedule 3
I.S. EN 60684-2:2011 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011)
03/103740 DC : DRAFT FEB 2003 IEC 61337-1 ED.1 - FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
17/30347868 DC : 0 BS EN 50411-4-1 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A
17/30351682 DC : 0 BS EN ISO 20150 - FOOTWEAR AND FOOTWEAR COMPONENTS - QUANTITATIVE CHALLENGE TEST METHOD TO ASSESS ANTIFUNGAL ACTIVITY
BS EN 60512-11-5:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11e. Mould growth
ESI 09-13 : ISSUE 1 PERFORMANCE SPECIFICATION FOR HIGH VOLTAGE HEAT SHRINKABLE COMPONENTS FOR USE WITH HIGH VOLTAGE SOLID TYPE CABLES UP TO AND INCLUDING 33000 VOLTS
CEI EN 60684-3-320 : 2003 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 320: POLYETHYLENE TEREPHTHALATE TEXTILE SLEEVING, LIGHTLY IMPREGNATED
BS EN 60684-3-100 to 105:2002 Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Extruded PVC sleeving - Extruded PVC sleeving
BS EN 61753-111-9:2010 Fibre optic interconnecting devices and passive components performance standard Sealed closures for category S. Subterranean
13/30264600 DC : 0 BS EN 60747-14-8 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-8: SEMICONDUCTOR SENSORS - CAPACITIVE DEGRADATION SENSOR OF LIQUID
I.S. EN 50411-2-8:2009 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-8: MICRODUCT CONNECTORS, FOR AIR BLOWN OPTICAL FIBRES, TYPE 1
07/30170352 DC : DRAFT AUG 2007 BS EN 50411-2 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES AND MICRODUCT CONNECTORS
BS EN 61007:1997 Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
BS EN 60505:2011 Evaluation and qualification of electrical insulation systems
BS EN 60464-2:2001 Varnishes used for electrical insulation Methods of test
CEI EN 60512-11-5 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-5: CLIMATIC TESTS TEST 11E: MOULD GROWTH
CEI EN 61300-2-16 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-16: TESTS - MOULD GROWTH
BS EN 180000:1996 Harmonized system of quality assessment for electronic components. Generic specification: Fibre optic attenuators
PD 6521:1988 Summaries of test methods for environmental testing of electrotechnical products
BS EN 61811-11:2003 Electromechanical all-or-nothing relays Blank detail specification. Relays for industrial application
BS EN 61810-7:2006 Electromechanical elementary relays Test and measurement procedures
NF EN 60684 3-300 : 2003 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 300: GLASS TEXTILE FIBER SLEEVING, BRAIDED, UNCOATED
BS EN 61010-2-012:2016 Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment
BS ISO 16869:2001 Plastics. Assessment of the effectiveness of fungistatic compounds in plastics formulations
CSA C22.2 No. 61010-2-012 : 2017 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
ISO 13125:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antifungal activity of semiconducting photocatalytic materials
I.S. EN 61010-2-012:2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT
CEI EN 60505 : 2012 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
BS EN ISO 846:1997 Plastics. Evaluation of the action of microorganisms
CEI EN 61753-111-7 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-7: SEALED CLOSURES FOR CATEGORY A - AERIA
CEI EN 61810-7 : 2006 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
I.S. EN 61020-1:2009 ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 50411-2:2008 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS
IEC 62134-1:2009 Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification
I.S. EN 61086-2:2004 COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
ISO 846:1997 Plastics Evaluation of the action of microorganisms
IEC 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
IEC 61007:1994 Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
12/30266531 DC : 0 BS EN TS 62257-1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 1: GENERAL INTRODUCTION TO RURAL ELECTRIFICATION
IEC 60505:2011 Evaluation and qualification of electrical insulation systems
IEC 60464-2:2001+AMD1:2006 CSV Varnishes used for electrical insulation - Part 2: Methods of test
IEC 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
IEC 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification
IEC 61811-11:2002 Electromechanical elementary relays of assessed quality - Part 11: Blank detail specification - Relays for industrial application
IEC 61747-1:1998+AMD1:2003 CSV Liquid crystal and solid-state display devices - Part 1: Generic specification
IEC 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
IEC 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
IEC 61753-111-9:2009 Fibre optic interconnecting devices and passive components performance standard - Part 111-9: Sealed closures for category S - Subterranean
ISO/TS 14907-1:2015 Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures
IEC 61753-111-8:2009 Fibre optic interconnecting devices and passive components performance standard - Part 111-8: Sealed closures for category G - Ground
ISO 16187:2013 Footwear and footwear components Test method to assess antibacterial activity
IEC 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
IEC 60512-11-5:2002 Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth
IEC 60068-3-4:2001 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
IEC 61300-2-16:2006 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-16: Tests - Mould growth
BS EN 50491-2 : 2010 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
IEC 61753-111-7:2009 Fibre optic interconnecting devices and passive components performance standard - Part 111-7: Sealed closures for category A - Aerial
IEC 61757-1:2012 Fibre optic sensors - Part 1: Generic specification
IEC 60684-3-300:2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 300: Glass textile fibre sleeving, braided, uncoated
EN 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
EN 180000 : 1995 GENERIC SPECIFICATION: FIBRE OPTIC ATTENUATORS
I.S. EN 60068-3-4:2002 ENVIRONMENTAL TESTING - PART 3-4: SUPPORTING DOCUMENTATION AND GUIDANCE - DAMP HEAT TESTS
BS EN 62134-1:2009 Fibre optic interconnecting devices and passive components. Fibre optic closures Generic specification
CEI EN 61753-111-9 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 111-9: SEALED CLOSURES FOR CATEGORY S - SUBTERRANEAN
11/30243576 DC : DRAFT FEB 2011 BS EN 62643-1 - ELECTROSTATIC MICRO ELECTRO MECHANICAL SYSTEMS (MEMS) OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
16/30353588 DC : 0 BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
I.S. EN 50491-2:2010 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
CEI EN 60684-2 : 2012 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
BS EN 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment Generic specification
13/30264596 DC : 0 BS EN 60747-14-7 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-7: SEMICONDUCTOR SENSORS - FLOW METER
BS EN 61753-111-8:2010 Fibre optic interconnecting devices and passive components performance standard Sealed closures for category G. Ground
10/30240248 DC : 0 BS EN 60862-1 - SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
DEFSTAN 61-10(PT1)/1(1995) : 1995 GENERATOR SETS (GROUND, ENGINE DRIVEN) POWER AND DISTRIBUTION - PART 1: BOX, DISTRIBUTION 13 A 3 WAY, 240 V FOR FIELD ELECTRICAL POWER DISTRIBUTION SYSTEMS INCORPORATING CECC 75201.007 INPUT CONNECTOR
I.S. EN 50411-2-5:2009 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-5: SEALED CLOSURES FOR AIR BLOWN FIBRE MICRODUCT, TYPE 1, FOR CATEGORY S & A
I.S. EN 62604-1:2015 SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 60684-3-300:2002 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 300: GLASS TEXTILE FIBRE SLEEVING, BRAIDED, UNCOATED
CEI EN 62134-1 : 2011 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
I.S. EN 60862-1:2015 SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 60512-11-5:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-5: CLIMATIC TESTS - TEST 11E: MOULD GROWTH
I.S. EN ISO 16187:2013 FOOTWEAR AND FOOTWEAR COMPONENTS - TEST METHOD TO ASSESS ANTIBACTERIAL ACTIVITY (ISO 16187:2013)
I.S. EN 181000:1994 FIBRE OPTIC BRANCHING DEVICES (GENERIC SPECIFICATION)
I.S. EN 61811-11:2003 ELECTROMECHANICAL ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 11: BLANK DETAIL SPECIFICATION - RELAYS FOR INDUSTRIAL APPLICATION
NF EN 60835 1-1 : 1993 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS - PART 1: MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS - SECTION ONE: GENERAL
NF EN 60684 3 406 TO 408 : 2004 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 406 TO 408: GLASS TEXTILE SLEEVING WITH PVC COATING
IEC 61019-1-2:1993 Surface acoustic wave (SAW) resonators - Part 1: General information, standard values and test conditions - Section 2: Test conditions
I.S. CECC 86000:1993 CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - PART 1: REQUIREMENTS, TEST METHODS AND QUALIFICATION APPROVAL PROCEDURES (GENERIC SPECIFICATION)
I.S. EN 116000-3:1998 GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES
I.S. EN ISO 846:1998 PLASTICS - EVALUATION OF THE ACTION OF MICROORGANISMS
IEC 61810-7:2006 Electromechanical elementary relays - Part 7: Test and measurement procedures
EN 50411-2-8:2009 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: Microduct connectors, for air blown optical fibres, Type 1
EN 61300-2-16 : 2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-16: TESTS - MOULD GROWTH
EN 61757-1 : 2012 FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012)
EN 61811-11:2003 Electromechanical elementary relays of assessed quality - Part 11: Blank detail specification - Relays for industrial application
EN 50411-2:2008 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2: General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors
EN 60368-1:2000/A1:2004 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
EN 60464-2:2001/A1:2006 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
EN 61810-7:2006 Electromechanical elementary relays - Part 7: Test and measurement procedures
EN 60512-11-5 : 2002 Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth
EN 50491-2 : 2010 AMD 1 2015 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
EN 116000-3 : 1996 GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES
EN 60684-3-300:2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 300: Glass textile fibre sleeving, braided, uncoated
EN 50411-2-5:2009 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-5: Sealed closures for air blown fibre microduct, type 1, for category S & A
EN 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
CEN ISO/TS 14907-1:2015 Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015)
EN 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification

ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
ISO 846:1997 Plastics Evaluation of the action of microorganisms

View more information
$571.01
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more