IEC 60076-14:2013
Current
The latest, up-to-date edition.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French, Spanish, Castilian
16-09-2013
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Insulation systems
5 Temperature rise limits
6 Components and materials
7 Special design considerations
8 Required information
9 Rating plate and additional information
10 Test requirements
11 Supervision, diagnostics, and maintenance
Annex A (informative) - Insulation materials
Annex B (informative) - Rapid temperature increase
and bubble generation
Annex C (informative) - Ester liquid and cellulose
Annex D (normative) - Insulation system coding
Bibliography
IEC 60076-14:2013 applies to liquid-immersed power transformers employing either high-temperature insulation or combinations of high-temperature and conventional insulation, operating at temperatures above conventional limits. It is applicable to:
- power transformers in accordance with IEC 60076-1;
- convertor transformers according to IEC 61378 series;
- transformers for wind turbine applications in accordance with IEC 60076-16;
- arc furnace transformers;
- reactors in accordance with IEC 60076-6. This part of IEC 60076 may be applicable as a reference for the use of high-temperature insulation materials in other types of transformers and reactors. This first edition of IEC 60076-14 cancels and replaces the second edition of the Technical Specification IEC/TS 60076-14 published in 2009. It constitutes a technical revision.
| DevelopmentNote |
Supersedes IEC TS 60076-14. Stability date: 2017. (09/2013)
|
| DocumentType |
Standard
|
| Pages |
119
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 60076-14 : 2014 | Identical |
| NBN EN 60076-14 : 2014 | Identical |
| NEN EN IEC 60076-14 : 2013 | Identical |
| PN EN 60076-14 : 2014 | Identical |
| SANS 60076-14 : 3ED 2014 | Identical |
| DIN EN 60076-14 : 2014 | Identical |
| VDE 0532-76-14 : 2014 | Identical |
| UNE-EN 60076-14:2014 | Identical |
| BS EN 60076-14:2013 | Identical |
| CEI EN 60076-14 : 2014 | Identical |
| EN 60076-14:2013 | Identical |
| SANS 60076-14:2014(R2019) | Identical |
| IS 2026 : Part 14 : 2018 | Identical |
| 02/209876 DC : DRAFT NOV 2002 | IEC 62332 TS ED.1 - ELECTRICAL INSULATION SYSTEMS (EIS) - THERMAL EVALUATION OF COMBINED LIQUID AND SOLID COMPONENTS |
| BS IEC 60076-15:2015 | Power transformers Gas-filled power transformers |
| BS EN 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
| IEC TS 62332-2:2014 | Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified test |
| BS IEC 61378-3:2015 | Converter transformers Application guide |
| IEC 60076-7:2018 | Power transformers - Part 7: Loading guide for mineral-oil-immersed power transformers |
| IEC 62695:2014 | Railway applications - Fixed installations - Traction transformers |
| IEC 61378-3:2015 | Converter transformers - Part 3: Application guide |
| CEI EN 62770 : 2014 | FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT |
| 14/30271248 DC : 0 | BS EN 60310 ED 4.0 - RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK |
| I.S. EN 60310:2016 | RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK |
| IEC 62770:2013 | Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment |
| UNE-EN 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
| BS EN 62770:2014 | Fluids for electrotechnical applications. Unused natural esters for transformers and similar electrical equipment |
| PD IEC/TS 62332-2:2014 | Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components Simplified test |
| BS EN 60310:2016 | Railway applications. Traction transformers and inductors on board rolling stock |
| I.S. EN 60836:2015 | SPECIFICATIONS FOR UNUSED SILICONE INSULATING LIQUIDS FOR ELECTROTECHNICAL PURPOSES |
| I.S. EN 62770:2014 | FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT |
| IEC 60076-15:2015 | Power transformers - Part 15: Gas-filled power transformers |
| IEC 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
| IEC 60310:2016 | Railway applications - Traction transformers and inductors on board rolling stock |
| UNE-EN 62770:2014 | Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment |
| C88-16 | Power transformers and reactors |
| EN 62770:2014 | Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment |
| EN 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
| EN 60310:2016/AC:2018-03 | RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK (IEC 60310:2016/COR1:2018) |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| IEC 60076-7:2005 | Power transformers - Part 7: Loading guide for oil-immersed power transformers |
| IEEE 62-1995 | IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors |
| IEC TS 62332-1:2011 | Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements |
| IEC 61039:2008 | Classification of insulating liquids |
| IEC 60422:2013 | Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
| IEC 60599:2015 | Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis |
| IEC 60076-5:2006 | Power transformers - Part 5: Ability to withstand short circuit |
| IEEE C57.91-2011 REDLINE | IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators |
| IEC 61100:1992 | Classification of insulating liquids according to fire-point and net calorific value |
| IEC 60567:2011 | Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance |
| IEC 61099:2010 | Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes |
| IEC 60076-4:1976 | Power transformers - Part 4: Tappings and connections |
| IEC 60505:2011 | Evaluation and qualification of electrical insulation systems |
| IEC 60076-8:1997 | Power transformers - Part 8: Application guide |
| IEC 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| IEC 61629-1:1996 | Aramid pressboard for electrical purposes - Part 1: Definitions, designations and general requirements |
| IEC 60970:2007 | Insulating liquids - Methods for counting and sizing particles |
| IEC 60137:2017 | Insulated bushings for alternating voltages above 1000 V |
| IEC 60076-1:2011 | Power transformers - Part 1: General |
| IEC 60944:1988 | Guide for the maintenance of silicone transformer liquids |
| IEC 60867:1993 | Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons |
| IEC 61378-2:2001 | Convertor transformers - Part 2: Transformers for HVDC applications |
| IEC 61378-3:2015 | Converter transformers - Part 3: Application guide |
| IEC 60076-2:2011 | Power transformers - Part 2: Temperature rise for liquid-immersed transformers |
| IEC 61203:1992 | Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment |
| IEEE C57.100-2011 | IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power Transformers |
| IEEE 1276-1997 | IEEE Guide for the Application of High-Temperature Insulation Materials in Liquid-Immersed Power Transformers |
| IEEE C57.147-2008 | IEEE Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers |
| IEC 60216-1:2013 | Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
| IEC 60076-16:2011 | Power transformers - Part 16: Transformers for wind turbine applications |
| IEC 61378-1:2011 | Converter transformers - Part 1: Transformers for industrial applications |
| IEC 60214-1:2014 | Tap-changers - Part 1: Performance requirements and test methods |
| IEC 60851-4:2016 | Winding wires - Test methods - Part 4: Chemical properties |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.