Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEC 60204-1:2016

Current
Current

The latest, up-to-date edition.

Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French, Spanish, Castilian

Published date

13-10-2016

IEC 60204-1:2016 is available as IEC 60204-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60204-1:2016 applies to electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner. The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the machine. This sixth edition cancels and replaces the fifth edition published in 2005. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- added requirements to address applications involving power drive systems (PDS);
- revised electromagnetic compatibility (EMC) requirements;
- clarified overcurrent protection requirements;
- requirements for determination of the short circuit current rating of the electrical equipment;
- revised protective bonding requirements and terminology;
- reorganization and revision to Clause 9, including requirements pertaining to safe torque off of PDS, emergency stop, and control circuit protection;
- revised symbols for actuators of control devices;
- revised technical documentation requirements;
- general updating to current special national conditions, normative standards, and bibliographical references.

Committee
TC 44
DevelopmentNote
Supersedes IEC 60550. (03/2001) Supersedes IEC 60204-1A, IEC 60204-1C and IEC 60204-1D. (07/2004) Stability Date: 2019. (10/2016)
DocumentType
Standard
ISBN
978-2-8322-3621-5
Pages
297
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

BS ISO 18646-1:2016 Robotics. Performance criteria and related test methods for service robots Locomotion for wheeled robots
I.S. EN ISO 10218-2:2011 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION
UNE-EN 1501-5:2012 Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
UNE-EN 60947-5-3:2014 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
DIN ISO 5826 : 2000 RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - GENERAL SPECIFICATIONS APPLICABLE TO ALL TRANSFORMERS
AAMI IEC TIR 60878 : 2003 GRAPHICAL SYMBOLS FOR ELECTRICAL EQUIPMENT IN MEDICAL PRACTICE
UNE-EN 60079-17:2014 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
CEI EN 60519-9 : 2006 SAFETY IN ELECTROHEAT INSTALLATIONS - PART 9: PARTICULAR REQUIREMENTS FOR HIGH-FREQUENCY DIELECTRIC HEATING INSTALLATIONS
14/30265058 DC : 0 BS EN ISO 13850 - SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN
CEI CLC/TS 62046 : 2011 SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
CEI EN 61784-3-12 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12
05/30106456 DC : DRAFT AUG 2005 IEC 62282-6 - FUEL CELL TECHNOLOGIES - PART 6-1: MICRO FUEL CELL POWER SYSTEMS - SAFETY
BS EN ISO 19085-2:2017 Woodworking machines. Safety Horizontal beam panel circular sawing machines
BS EN 61800-7-202:2016 Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Profile type 2 specification
UNE-EN ISO 4414:2011 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
DIN EN 1034-21:2012-11 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
PREN ISO 5826 : DRAFT 2012 RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - GENERAL SPECIFICATIONS APPLICABLE TO ALL TRANSFORMERS (ISO/DIS 5826:2012)
DIN EN 1034-21 E : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
14/30297515 DC : 0 BS EN 16704-2-1 - RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-1: COMMON SOLUTIONS AND TECHNOLOGY - TECHNICAL REQUIREMENTS FOR TRACK WARNING SYSTEMS (TWS)
03/313810 DC : 0 EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
BS EN 81-41:2010 Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Vertical lifting platforms intended for use by persons with impaired mobility
DIN EN 14753 E : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
I.S. EN ISO 19085-8:2018 WOODWORKING MACHINES - SAFETY - PART 8: BELT SANDING AND CALIBRATING MACHINES FOR STRAIGHT WORKPIECES (ISO 19085-8:2017)
ISO 19085-8:2017 Woodworking machines Safety Part 8: Belt sanding and calibrating machines for straight workpieces
PD IEC/TR 60878:2015 Graphical symbols for electrical equipment in medical practice
DIN EN 15164 E : 2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
DIN EN 15879-1:2011-05 Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling - Part 1: Direct exchange-to-water heat pumps
PREN 50050-1 : DRAFT 2011 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
09/30179854 DC : 0 BS EN 13114:2002/A1 - TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
BS EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Front loaded refuse collection vehicles
CEI EN 61310-2 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
DIN EN 15162:2008-10 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
02/124462 DC : DRAFT DEC 2002 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
BS EN 1870-19:2013 Safety of woodworking machines. Circular sawing machines Circular saw benches (with and without sliding table) and building site saws
08/30180496 DC : DRAFT SEP 2008 BS EN 869 AMD1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
BS EN 14677:2008 Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel
08/30178378 DC : 0 BS EN 1218-3:2001/A1 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
BS ISO 15519-1:2010 Specification for diagrams for process industry General rules
BS EN 81-31:2010 Safety rules for the construction and installation of lifts. Lifts for the transport of goods only Accessible goods only lifts
BS EN ISO 10218-1:2011 Robots and robotic devices. Safety requirements for industrial robots Robots
DIN EN ISO 13856-2:2013-08 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
12/30244749 DC : 0 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
ISO 13105-2:2014 Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification
DIN EN 15166:2010-02 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
PD CLC/TR 62685:2011 Industrial communication networks. Profiles. Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs)
BS ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Safety
I.S. EN 12445:2000 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - TEST METHODS
BS EN 1829-1:2010 High pressure water jet machines. Safety requirements Machines
BS EN 15166:2008 Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements
UNE-EN 61400-24:2011 Wind turbines - Part 24: Lightning protection
07/30164535 DC : 0 BS EN 60974-8 - ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS
NF ISO 20966 : 2007 AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING
01/702212 DC : DRAFT JAN 2001 ISO 11553 - SAFETY OF MACHINERY- LASER PROCESSING MACHINES - SAFETY REQUIREMENTS
PREN 378-3 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION
98/203578 DC : DRAFT JULY 1998 IEC 60364-7-716 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-716: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AUXILIARY CIRCUITS
16/30337092 DC BS EN 13378. Pasta processing plant. Pasta presses. Safety and hygiene requirements
I.S. EN 13616-2:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE
15/30331847 DC : 0 PD ISO/TS 15066 - ROBOTS AND ROBOTIC DEVICES - COLLABORATIVE ROBOTS
NF EN ISO 12100 : 2010 SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
BS ISO 16924 : 2016 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
BS ISO 21927-10:2011 Smoke and heat control systems Specification for power output devices
BS EN ISO 12100:2010 Safety of machinery. General principles for design. Risk assessment and risk reduction
DIN EN 16564 E : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
BS EN 15954-2:2013 Railway applications. Track. Trailers and associated equipment General safety requirements
13/30288591 DC : 0 BS EN 60974-1 - ARC WEDLING EQUIPMENT - PART 1: WELDING POWER SOURCE
11/30252448 DC : 0 BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
09/30181673 DC : 0 BS EN 13035-9:2006/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
07/30145333 DC : 0 BS EN 60703 - TEST METHODS FOR ELECTROHEATING INSTALLATIONS WITH ELECTRON GUNS
09/30209621 DC : 0 BS ISO 5149-3 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE
ISO/TS 22595-1:2006 Dentistry Plant area equipment Part 1: Suction systems
ISO 12643-1:2009 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements
11/30248849 DC : 0 BS EN 50050-3:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
UNE-EN 50050-2:2014 Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder
BS ISO 12643-1:2009 Graphic technology. Safety requirements for graphic technology equipment and systems General requirements
10/30235503 DC : 0 BS EN 61496-1 AMD 2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
CEI EN 61784-3-8 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-8: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 8
12/30253910 DC : DRAFT JULY 2012 BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES
UNE-EN 16743:2016 Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements
06/30155798 DC : DRAFT SEP 2006 BS EN 62046 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
I.S. EN 50569:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
10/30198892 DC : 0 BS EN ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
BS 6753:1986 Specification for shotbolts (solenoid operated) for guarding machinery
13/30279579 DC : 0 BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
12/30243081 DC : 0 BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
PREN 1870-3 : DRAFT 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
BS EN ISO 4413:2010 Hydraulic fluid power. General rules and safety requirements for systems and their components
16/30331346 DC : 0 BS EN ISO 14118 - SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
BS EN 82079-1:2012 Preparation of instructions for use. Structuring, content and presentation General principles and detailed requirements
DIN EN 16564:2015-04 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
11/30231451 DC : DRAFT SEP 2011 BS EN ISO 13856-1 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS
13/30294110 DC : 0 BS EN 61784-3-X ED 1.0 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-X: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF X
03/306044 DC : DRAFT APR 2003 BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
BS EN ISO 14119:2013 Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
BS EN 61400-1 : 2005 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
03/118276 DC : DRAFT NOV 2003 BS EN 14812-1 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE AND SAFETY TESTING - PART 1: PRE-SET DOSING SYSTEMS
14/30278956 DC : 0 BS ISO 17842-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE
CEI EN 60947-5-3 : 2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
BS EN 60703:2009 Test methods for electroheating installations with electron guns
12/30262897 DC : DRAFT JUNE 2012 BS EN 1674 - FOOD PROCESSING MACHINERY - DOUGH SHELTERS - SAFETY AND HYGIENE REQUIREMENTS
15/30281554 DC : 0 BS ISO 10896-2 - ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING TRUCKS
I.S. EN 16474:2015 PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS
PREN 14180 : DRAFT 2012 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
BS EN 61241-17:2005 Electrical apparatus for use in the presence of combustible dust Inspection and maintenance of electrical installations in hazardous areas (other than mines)
04/30123607 DC : DRAFT OCT 2004 EN 15061:2004 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
DIN EN 13035-6 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
11/30237569 DC : 0 BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
03/118984 DC : 0 ISO 15998 - EARTH-MOVING MACHINERY - MACHINE-CONTROL SYSTEMS (MCS) USING ELECTRONIC COMPONENTS - PERFORMANCE CRITERIA AND TESTS
BS EN 16252:2012 Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements
09/30179845 DC : 0 BS EN 13112:2002/A1 - TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY
BS EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment inside the factory
05/30139440 DC : DRAFT SEP 2005 IEC 60079-17 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
DIN EN 15093:2009-06 Safety of machinery - Safety requirements for hot flat rolling mills
BS EN 61784-3-2:2017 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 2
12/30258880 DC : 0 BS EN 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
BS EN 15848:2010 Water conditioning equipment inside buildings. Adjustable chemical dosing systems. Requirements for performance, safety and testing
BS EN 16474:2015 Plastics and rubber machines. Tyre curing machines. Safety requirements
DIN EN 15180:2015-01 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
11/30249223 DC : 0 BS EN 50570 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
02/709474 DC : DRAFT JULY 2002 BS EN 1760-3 - SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
BS EN 15093:2008 Safety of machinery. Safety requirements for hot flat rolling mills
16/30347446 DC : 0 BS EN 17064 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE
12/30268608 DC : 0 BS EN 60079-17/ED 5 - EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
BS EN 62282-3-100:2012 Fuel cell technologies Stationary fuel cell power systems. Safety
I.S. EN 62626-1:2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ENCLOSED EQUIPMENT - PART 1: ENCLOSED SWITCH-DISCONNECTORS OUTSIDE THE SCOPE OF IEC 60947-3 TO PROVIDE ISOLATION DURING REPAIR AND MAINTENANCE WORK
I.S. EN 50571:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES
CEI EN 61784-3-1 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-1: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 1
IEC 61800-5-2:2016 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
BS ISO 10896-2:2016 Rough-terrain trucks. Safety requirements and verification Slewing trucks
12/30244743 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
10/30227671 DC : 0 BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
BS EN 62282-3-1:2007 Fuel cell technologies Stationary fuel cell power systems. Safety
08/30182206 DC : DRAFT SEP 2008 BS EN 12348 AMD1 - CORE DRILLING MACHINES ON STAND - SAFETY
CEI 44-19 : 2008 SAFETY OF MACHINERY - GUIDELINE FOR THE USE OF COMMUNICATION SYSTEMS IN SAFETY-RELATED APPLICATIONS
16/30318928 DC : 0 BS EN ISO 19085-7 - WOODWORKING MACHINES - SAFETY - PART 7: SURFACE PLANING THICKNESS PLANING COMBINED SURFACE/THICKNESS PLANING MACHINES
11/30212367 DC : 0 BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT
PREN 474-1 : DRAFT 2017 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
PREN 285 : DRAFT 2013 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
09/30197984 DC : 0 BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
11/30251971 DC : 0 BS EN 12041 - FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 61000-6-7:2015 Electromagnetic compatibility (EMC) Generic standards. Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations
CSA C61400-3 : 2011 : R2016 WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
BS PD IEC TR 62685 : 2010 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS)
BS EN 15180:2014 Food processing machinery. Food depositors. Safety and hygiene requirements
03/314352 DC : 0 EN 378-3 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION
13/30276226 DC : 0 BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
12/30243084 DC : 0 BS EN 1034-21 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
PD ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
PD ISO/TR 13062:2015 Electric mopeds and motorcycles. Terminology and classification
15/30328744 DC : 0 BS EN 14511-4 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS FOR SPACE HEATING AND COOLING AND PROCESS CHILLERS, WITH ELECTRICALLY DRIVEN COMPRESSORS - PART 4: REQUIREMENTS
07/30170427 DC : 0 BS EN 203-1 AMD1 - GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES
BS EN 60947-5-8:2006 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Three-position enabling switches
BS EN 14753:2007 Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel
09/30181670 DC : 0 BS EN 13035-7:2006/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
NF EN ISO 16230-1 : 2015 AGRICULTURAL MACHINERY AND TRACTORS - SAFETY OF HIGHER VOLTAGE ELECTRICAL AND ELECTRONIC COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
05/30129947 DC : 0 EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
06/30157092 DC : 0 ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY
02/107764 DC : DRAFT DEC 2002 ISO 18652 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - EXTERNAL VIBRATORS FOR CONCRETE
ES 203 408 : 1.1.1 ENVIRONMENTAL ENGINEERING (EE); COLOUR AND MARKING OF DC CABLE AND CONNECTING DEVICES
BS EN 13035-11 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
10/30185766 DC : 0 BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
EN 61784-3-3:2017 Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3
S.R. CLC/TR 62685:2011 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010 (EQV))
03/112612 DC : DRAFT AUG 2003 EN 14710-2 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
08/30176940 DC : DRAFT JAN 2008 BS ISO 15519-1 - SPECIFICATION FOR DIAGRAMS FOR PROCESS INDUSTRY - PART 1: GENERAL RULES
BS 7228-6:1992 Industrial robots Recommendations for safety
09/30179710 DC : 0 BS EN 13035-5:2006/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
UNI EN 12012-4 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
UNI EN 81-40 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIR LIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
08/30183463 DC : DRAFT AUG 2008 BS EN 15848 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
UNI EN 15848 : 2010 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
ISO 13577-1:2016 Industrial furnaces and associated processing equipment Safety Part 1: General requirements
ISO 9386-2:2000 Power-operated lifting platforms for persons with impaired mobility — Rules for safety, dimensions and functional operation — Part 2: Powered stairlifts for seated, standing and wheelchair users moving in an inclined plane
08/30182212 DC : DRAFT SEP 2008 BS EN 13862 AMD1 - FLOOR CUTTING-OFF MACHINES - SAFETY
08/30173506 DC : DRAFT JAN 2008 BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
NF EN 15268 : 2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND SUBMERSIBLE PUMP ASSEMBLIES
CEI EN 61310-1 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
NF EN 60947-5-5 : 1998 AMD 2 2017 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
DIN EN 1807-1:2013-06 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
UNE-EN ISO 4413:2011 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
DIN EN 15774:2011-10 Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements
DIN EN 15861:2013-06 Food processing machinery - Smokehouses - Safety and hygiene requirements
DIN EN 14886 E : 2008 PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
DIN EN 1034-16:2012-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
PREN 15572 : DRAFT 2013 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
DIN EN ISO 13482:2014-11 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
DIN VDE 0800-1 : 1989 TELECOMMUNICATIONS - GENERAL CONCEPTS - REQUIREMENTS AND TESTS FOR THE SAFETY OF FACILITIES AND APPARATUS
I.S. EN 60947-5-5:1999 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
EN 15339-2:2007 Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units
BS EN 12042:2014 Food processing machinery. Automatic dough dividers. Safety and hygiene requirements
BS EN 50570:2013 Household and similar electrical appliances. Safety. Particular requirements for commercial electric tumble dryers
CSA C22.2 No. 60950.23 : 2007 : R2012 : FR INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
EN 81-41:2010 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
ISO 18758-2:2018 Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements
I.S. EN 1012-3:2013 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
I.S. EN 50176:2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
PREN ISO 13856-2 : DRAFT 2011 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURESENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO/DIS 13856-2:2011)
I.S. EN 1034-16:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
I.S. EN 415-10:2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
PREN 15163 : DRAFT 2014 MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS
I.S. EN 378-2:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
S.R. CEN ISO/TR 22100-1:2017 SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015)
I.S. EN ISO 18217:2015 SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
CEI EN 50569 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
BS EN ISO 4414:2010 Pneumatic fluid power. General rules and safety requirements for systems and their components
I.S. EN 62282-5-1:2012 FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV))
I.S. EN 15093:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
PREN 13012 : DRAFT 2010 PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
I.S. EN 12649:2008 CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
PREN 1870-12 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
I.S. EN 1807-2:2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
I.S. EN 62745:2017 SAFETY OF MACHINERY - REQUIREMENTS FOR CABLELESS CONTROL SYSTEMS OF MACHINERY
I.S. EN 1570-1:2011 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
I.S. EN 60204-31:2013 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 31: PARTICULAR SAFETY AND EMC REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (IEC 60204-31:2013 (EQV))
ISO 5149-3:2014 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 3: Installation site
ISO 14990-2:2016 Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 2: Particular requirements for externally-powered machines
I.S. EN 16500:2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
ISO 15531-44:2017 Industrial automation systems and integration — Industrial manufacturing management data — Part 44: Information modelling for shop floor data acquisition
I.S. EN 50570:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
I.S. EN 61784-3-17:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-17: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 17
CSA C61400-1 : 2014 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
I.S. EN 15180:2014 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 15571:2014 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
I.S. EN 1829-1:2010 HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
I.S. EN 61800-7-202:2016 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-202: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - PROFILE TYPE 2 SPECIFICATION
I.S. CLC TS 62046:2005 SAFETY OF MACHINERY- APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
I.S. EN 16282-2:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS
CSA C22.2 No. 62282-2 : 2007 : R2013 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
S.R. CEN/TR 16787:2014 INDUSTRIAL GAS INSTALLATION - GUIDELINE
CSA/ANSI C22.2 NO. 336-17 Particular requirements for rechargeable battery-operated commercial robotic floor treatment machines with traction drives
BS EN 61310-2:2008 Safety of machinery. Indication, marking and actuation Requirements for marking
ISO 16923:2016 Natural gas fuelling stations — CNG stations for fuelling vehicles
CEI EN 61557-14 : 2014 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 14: EQUIPMENT FOR TESTING THE SAFETY OF ELECTRICAL EQUIPMENT OF MACHINERY
DIN EN 14511-4:2015-12 (Draft) AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 4: OPERATING REQUIREMENTS, MARKING AND INSTRUCTIONS
I.S. EN 15861:2012 FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
ISO/IEC 80079-38:2016 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines
UNI EN ISO 12100 : 2010 SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
BS ISO 13577-1:2016 Industrial furnaces and associated processing equipment. Safety General requirements
ISO 19225:2017 Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems
I.S. EN 1034-17:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
UNI EN 15180 : 2014 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
EN 12331:2015 Food processing machinery - Mincing machines - Safety and hygiene requirements
UNE-EN ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)
17/30358367 DC : 0 BS EN 17128 - NON-APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - PERSONAL LIGHT ELECTRIC VEHICLES (PLEV) - SAFETY REQUIREMENTS AND TEST METHODS
UNE-EN 50050-3:2014 Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock
I.S. EN ISO 19085-5:2017 WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS (ISO 19085-5:2017)
I.S. EN ISO 14118:2018 SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP (ISO 14118:2017)
I.S. EN 15061:2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
EN 378-1:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
UNE-EN 16500:2015 Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
UNE-EN ISO 19085-1:2018 Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)
UNI EN 14511-4 : 2013 AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 4: OPERATING REQUIREMENTS, MARKING AND INSTRUCTIONS
16/30314039 DC : 0 BS EN 12301 - PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
15/30304275 DC : 0 BS EN 15746-4 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 4: TECHNICAL REQUIREMENTS FOR RUNNING, TRAVELLING AND WORKING ON URBAN RAIL
BS EN 50569:2013 Household and similar electrical appliances. Safety. Particular requirements for commercial electric spin extractors
BS EN 12453:2001 Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Requirements
NF ISO 16110-1 : 2009 HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
PREN 378-1 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
UNI EN 1034-21 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
EN 13012:2012 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
DIN EN ISO/IEC 80079-38:2012-08 (Draft) EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
IEC TR 60878:2015 Graphical symbols for electrical equipment in medical practice
PREN 16770 : DRAFT 2014 SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS
EN 12013:2018 Plastics and rubber machines - Internal mixers - Safety requirements
EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
IEC 60417-1:2002 Graphical symbols for use on equipment - Part 1: Overview and application
ISO 20898:2008 Industrial trucks — Electrical requirements
EN 378-3:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
BS EN 62026-2:2013 Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) Actuator sensor interface (AS-i)
I.S. EN 1114-3:2001 RUBBER AND PLASTICS MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
DIN EN 1673:2010-10 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements (includes Amendment A1:2009)
NFPA 79 : 2018 ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
EN 676:2003+A2:2008/AC:2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
EN 285:2015 Sterilization - Steam sterilizers - Large sterilizers
DIN EN 12409:2011-12 Plastics and rubber machines - Thermoforming machines - Safety requirements
DIN EN 609-1:2010-07 AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS
DIN EN 415-7:2009-12 Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008)
DIN EN 415-5:2010-04 Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009)
DIN EN 1034-3:2012-02 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
DIN EN 746-8:2001-04 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 8: PARTICULAR SAFETY REQUIREMENTS FOR QUENCHING EQUIPMENT
DIN EN 13288:2010-10 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 13378:2016-05 (Draft) PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13525:2010-05 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
DIN EN 12158-1:2011-06 Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010)
DIN EN 1870-7:2013-01 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
DIN EN 13355:2010-06 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
DIN EN 1422:2014-08 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN EN 746-3:2010-02 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases (includes Amendment A1:2009)
DIN EN 12852:2011-02 Food processing machinery - Food processors and blenders - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12978:2009-10 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
DIN EN ISO 13849-2:2013-02 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
DIN EN 1028-2:2008-06 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
DIN EN 1870-12:2014-03 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
DIN EN 1034-14:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter (includes Amendment A1:2009)
DIN EN 12653:2010-06 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements (includes Amendment A2:2009)
DIN EN 1870-16:2013-01 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
DIN EN 13675:2010-10 Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010)
DIN EN 13591:2010-10 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 500-1:2010-05 Mobile road construction machinery - Safety - Part 1: Common requirements (includes Amendment A1:2009)
DIN EN 1756-2:2009-12 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers (includes Amendment A1:2009)
DIN EN 12012-3:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
DIN EN 1870-9:2013-01 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 1760-3:2009-07 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
DIN EN 13136:2013-12 REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION
DIN EN 13418:2013-08 PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
DIN EN 1870-3:2015-02 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
DIN EN 13389:2010-10 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements (includes Amendment A1:2009)
I.S. EN 861:2007 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
UNE-EN 378-2:2017 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
BS EN 12203 : 2003 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
BS EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing General requirements
BS EN 13457 : 2004 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
BS EN 1612-1 : 1997 PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 1: SAFETY REQUIREMENTS FOR METERING AND MIXING UNITS
BS EN 14466 : 2005 FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
BS EN 710 : 1998 SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT
BS EN 13035-3 : 2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
17/30356606 DC : 0 BS ISO 8100-1 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 1: SAFETY REQUIREMENTS FOR PASSENGER AND GOODS PASSENGER LIFTS
UNE-EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
UNE-EN 12159:2013 Builders hoists for persons and materials with vertically guided cages
BS EN 1493:2010 Vehicle lifts
BS EN 13042-3 : 2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
13/30280057 DC : 0 BS EN 13782 - TEMPORARY STRUCTURE - TENTS - SAFETY
UNE-EN 13977:2012 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
BS EN 12855 : 2003 FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12111:2014 Tunnelling machines. Road headers and continuous miners. Safety requirements
BS EN 13954 : 2005 FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12348 : 2000 CORE DRILLING MACHINES ON A STAND - SAFETY
17/30338554 DC : 0 BS EN 1175 - SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL/ELECTRONIC REQUIREMENTS
BS EN 1398:2009 Dock levellers. Safety requirements
BS EN 12852 : 2001 FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 1870-7:2013 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
BS EN 500-4:2011 Mobile road construction machinery. Safety Specific requirements for compaction machines
BS EN 12984 : 2005 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN ISO 11252:2013 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)
BS EN 859 : 2007 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
BS EN 953 : 1998 SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
BS EN ISO 14744-1:2008 Welding. Acceptance inspection of electron beam welding machines Principles and acceptance conditions
17/30346770 DC : 0 BS EN 60974-9 - ARC WELDING EQUIPMENT - PART 9: INSTALLATION AND USE
UNI EN 81-22 : 2014 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH
BS EN 1870-16:2012 Safety of woodworking machines. Circular sawing machines Double mitre sawing machines for V cutting
ISO 11553-2:2007 Safety of machinery Laser processing machines Part 2: Safety requirements for hand-held laser processing devices
UNE-EN ISO 13849-2:2013 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
PD ISO/TR 18569:2004 Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
BS EN 1889-1:2011 Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles
BS EN 60825-1:2014 Safety of laser products Equipment classification and requirements
IEC 61400-2:2013 Wind turbines - Part 2: Small wind turbines
BS EN 13418:2013 Plastics and rubber machines. Winding machines for film or sheet. Safety requirements
BS EN 1374 : 2000 AGRICULTURAL MACHINERY - SILOS STATIONARY UNLOADERS FOR ROUND SILOS - SAFETY
05/30060689 DC : DRAFT JUN 2005 IEC 62282-3-1 - FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER PLANTS - SAFETY
BS EN 954-1:1997 Safety of machinery. Safety related parts of control systems General principles for design
BS EN 12921-2 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 2: SAFETY OF MACHINES USING WATER BASED CLEANING LIQUIDS
BS EN 14044:2014 High rise aerial appliances for fire and rescue service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods
BS EN 1870-9:2012 Safety of woodworking machines. Circular sawing machines Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
BS EN 13136 : 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION
08/30168069 DC : DRAFT MAR 2008 BS EN 60364-7-717 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS
UNE-EN ISO 16230-1:2016 Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)
BS EN 1870-15:2012 Safety of woodworking machines. Circular sawing machines Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
BS EN 12629-3 : 2002 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 3: SLIDE AND TURNTABLE MACHINES
BS EN 454:2014 Food processing machinery. Planetary mixers. Safety and hygiene requirements
BS EN 13243:2015 Safety requirements for cableway installations designed to carry persons. Electrical equipment other than for drive systems
DIN EN 13042-1:2010-04 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder (includes Amendment A1:2009)
15/30286010 DC : 0 BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
14/30278953 DC : 0 BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
BS EN 12622 : 2009 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
08/30195433 DC : 0 BS EN 60519-1 - SAFETY IN ELECTROHEAT INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
BS EN 12629-7 : 2004 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS
12/30268015 DC : 0 BS EN 62135-1 - RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
BS EN 280 : 2013 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
BS EN 1028-2 : 2002 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
BS EN 13886 : 2005 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN ISO 14119:2014 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013)
DIN EN 13042-2:2009-12 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding (includes Amendment A1:2009)
BS EN 12409 : 2008 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
BS EN 13842:2004 Oil fired forced convection air heaters. Stationary and transportable for space heating
BS EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels
BS EN 1870-10:2013 Safety of woodworking machines. Circular sawing machines Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
15/30286835 DC : 0 BS ISO 14990-2 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 2: PARTICULAR REQUIREMENTS FOR EXTERNALLY-POWERED MACHINES
BS EN 12110:2014 Tunnelling machines. Air locks. Safety requirements
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
BS EN 13378 : 2001 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12853 : 2001 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12418 : 2000 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
BS EN 15067:2007 Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements
BS EN 12159:2012 Builders hoists for persons and materials with vertically guided cages
BS EN 1034-1 : 2000 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1 - COMMON REQUIREMENTS
I.S. EN 859:2007 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES
BS EN 13861:2011 Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery
BS EN 1678 : 1998 FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1673 : 2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1673:2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12463:2014 FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13871:2014 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1422:1997-11 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
CEI EN 61800-1 : 2000 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
EN 13870:2015 Food processing machinery - Portion cutting machines - Safety and hygiene requirements
I.S. EN 13977:2011 RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
DIN EN 12601:2011-07 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
I.S. EN 14812:2005 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
UNI EN 1218-5 : 2010 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
EN 12463:2014 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements
I.S. EN 14010:2004
I.S. EN 14043:2014 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
I.S. EN 1870-16:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
I.S. EN 13570:2005 FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12921-1:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
I.S. EN 13367:2005 CERAMIC MACHINES - SAFETY - TRANSFER PLATFORMS AND CARS
I.S. EN 12629-8:2003 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 8: MACHINES AND EQUIPMENT FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CALCIUM-SILICATE (AND CONCRETE)
I.S. EN 13289:2001 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 454:2014 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1570:1998-08 SAFETY REQUIREMENTS FOR LIFTING TABLES
IEC 61326-3-1:2017 Electrical equipment for measurement, control and laboratory use - EMC requirements – Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) – General industrial applications
EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery
EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
UNI EN 12158-1 : 2010 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
DIN EN 13241-1:2004-04 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS
EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
DIN EN 13842:2004-10 Oil fired forced convection air heaters - Stationary and transportable for space heating
EN 1010-2:2006+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
EN 50374:2004 Conductor cars
EN 13418:2013 Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
EN 60974-8:2009 Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems
DIN EN 15067:2008-03 Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
EN 1114-1:2011 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
EN 60950-23:2006/corrigendum:2008 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
EN 1034-17:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines
EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site - Safety
EN 1034-5:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters
EN 12012-4:2006+A1:2008 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
EN 13102:2005+A1:2008 Ceramic machines - Safety - Loading and unloading of fine clay tiles
EN 1501-5:2011 Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
EN 60825-4:2006/A2:2011 SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS
EN 62282-3-1 : 2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory
EN 60947-5-8:2006 Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches
EN 61310-3:2008 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
EN 61400-2:2014 Wind turbines - Part 2: Small wind turbines
EN 13379:2001+A1:2013 Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements
EN 12626 : 1997 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - SAFETY REQUIREMENTS
EN 60703:2009 Test methods for electroheating installations with electron guns
EN 62626-1:2014 Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
EN 12044:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
EN 12653:1999+A2:2009 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements
EN 12355:2003+A1:2010 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements
EN 1010-1:2004+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
EN 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
EN 12921-2:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids
EN 12547:2014 Centrifuges - Common safety requirements
EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
EN 13112:2002+A1:2009 Tannery machines - Splitting and bandknife shearing machines - Safety requirements
EN 60519-7:2008 Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns
DIN EN 1114-3:2010-01 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
EN 16191:2014 Tunnelling machinery - Safety requirements
EN 50177:2009/A1:2012 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
EN 60519-9:2005 Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations
UNE-EN 972:1999 TANNERY MACHINES. RECIPROCATING ROLLER MACHINES. SAFETY REQUIREMENTS.
EN ISO 14119:2013 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013)
EN 1034-8:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants
EN 12852:2001+A1:2010 Food processing machinery - Food processors and blenders - Safety and hygiene requirements
EN 1034-6:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
EN 12151:2007 Machinery and plants for the preparation of concrete and mortar - Safety requirements
EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
EN 12336:2005+A1:2008 Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements
HD 60364-7-717:2010/AC:2014 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS
EN 60204-11:2000/corrigendum:2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
EN 1501-1:2011+A1:2015 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles
EN 12445:2000 Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods
EN 1218-3:2001+A1:2009 Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers
EN 12601:2010 Reciprocating internal combustion engine driven generating sets - Safety
EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
DIN EN ISO 12100-1:2004-04 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
DIN EN 982:2009-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
EN 1034-21:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines
EN 1028-2:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements
EN 12043:2014 Food processing machinery - Intermediate provers - Safety and hygiene requirements
NF EN ISO 11553-1 : 2009 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS
EN 61784-3-1:2010 Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1
EN 12779:2015 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
EN 12041:2014 Food processing machinery - Moulders - Safety and hygiene requirements
EN 13534:2006+A1:2010 Food processing machinery - Curing injection machines - Safety and hygiene requirements
EN 1175-1:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
EN 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
EN 1247:2004+A1:2010 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
NF EN 201 : 2009 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN 13378:2001+A1:2013 Pasta processing plants - Pasta presses - Safety and hygiene requirements
EN 61241-17:2005 Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)
EN 12267:2003+A1:2010 Food processing machinery - Circular saw machines - Safety and hygiene requirements
EN 13114:2002+A1:2009 Tannery machines - Rotating process vessels - Safety requirements
EN 1248:2001+A1:2009 Foundry machinery - Safety requirements for abrasive blasting equipment
EN 12409:2008+A1:2011 Plastics and rubber machines - Thermoforming machines - Safety requirements
EN 12101-10:2005/AC:2007 SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES
EN 1807-1:2013 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
EN 12268:2014 Food processing machinery - Band saw machines - Safety and hygiene requirements
UNI EN 12463 : 2014 FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
EN 61800-5-2:2017 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
EN 61400-3:2009 Wind turbines - Part 3: Design requirements for offshore wind turbines
DIN EN ISO 12100-2:2004-04 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN 61784-3-6:2010 Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6
EN 61784-3-14:2010 Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14
HD 384.7.711 : 200S1 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out
EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
EN 12215:2004+A1:2009 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
EN 13113:2002+A1:2010 Tannery machines - Roller coating machines - Safety requirements
EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements
EN 12622:2009+A1:2013 Safety of machine tools - Hydraulic press brakes
EN 13289:2001+A1:2013 Pasta processing plants - Dryers and coolers - Safety and hygiene requirements
EN 13243:2015 Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
EN 1218-4:2004+A2:2009 Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)
EN 12854:2003+A1:2010 Food processing machinery - Beam mixers - Safety and hygiene requirements
EN 50050-3:2013 Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock
EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations
EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates - Product standard, performance characteristics
EN 12649:2008+A1:2011 Concrete compactors and smoothing machines - Safety
EN 1034-13:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units
EN 12629-3:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines
EN 1034-7:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests
EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements
EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
UNI EN 1034-1 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
EN 12012-3:2001+A1:2008 Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders
EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines
EN 12855:2003+A1:2010 Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements
EN 61000-6-7:2015 Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations
DIN EN 16147:2017-08 Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units (includes Corrigendum :2017)
EN 1034-2:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
EN 12417:2001+A2:2009/AC:2010 MACHINE TOOLS - SAFETY - MACHINING CENTRES
EN 12012-2:2001+A2:2008 Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
EN 50570:2013/A1:2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
DIN EN 60204-3-1 : 1993 ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINES - PART 3: PARTICULAR REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
CEI EN 62135-1 : 2016 RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
NBR IEC 61400-1 : 2008 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
NF EN 500-4 : 2011 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES
CLC/TS 62081:2002 Arc welding equipment - Installation and use
15/30302620 DC : 0 BS EN ISO 19085-4 - WOODWORKING MACHINES - SAFETY - PART 4: VERTICAL PANEL CIRCULAR SAWING MACHINES
DIN ISO 669:2001-06 RESISTANCE WELDING - RESISTANCE WELDING EQUIPMENT - MECHANICAL AND ELECTRICAL REQUIREMENTS
PREN 1422 : DRAFT 2011 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN EN 1501-3:2010-06 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
BS EN 60974-8:2009 Arc welding equipment Gas consoles for welding and plasma cutting systems
11/30246684 DC : 0 BS EN 1953 - ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
IEC 61800-5-2 REDLINE : 2ED 2016 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
09/30178310 DC : DRAFT FEB 2009 BS EN 1807:1999/A1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
I.S. EN 16252:2012 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
12/30265270 DC : 0 BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
BS EN 691-1:2012 Safety of woodworking machines Common requirements
ISO 13578:2017 Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces
BS EN 1034-8:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Refining plants
DIN EN 12012-1:2015-05 (Draft) PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
BS EN ISO 10218-2:2011 Robots and robotic devices. Safety requirements for industrial robots Robot systems and integration
I.S. EN ISO 11111-5:2005 TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 5: PREPARATORY MACHINERY TO WEAVING AND KNITTING (ISO 11111-5:2005)
ISO 20690:2018 Graphic technology — Determination of the operating power consumption of digital printing devices
DIN EN 15955-2:2013-09 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
11/30237566 DC : 0 BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
14/30296658 DC : 0 BS IEC 62046 ED1.0 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
BS EN 15879-1:2011 Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling Direct exchange-to-water heat pumps
DIN EN ISO 13856-3 E : 2013 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
ISO 18652:2005 Building construction machinery and equipment External vibrators for concrete
03/301332 DC : DRAFT JAN 2003 ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
UNE-EN 1870-13:2008 Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
CEI EN 50571 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES
16/30322398 DC : 0 BS EN 1612 - PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES AND PLANTS - SAFETY REQUIREMENTS
DIN EN 13035-5 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
BS EN 62282-5-1:2012 Fuel cell technologies Portable fuel cell power systems. Safety
UNE-EN ISO 16093:2017 Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
I.S. EN 62282-3-1:2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
12/30262894 DC : 0 BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
I.S. EN 60950-23:2008 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
I.S. EN 12840:2001 SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
08/30178810 DC : DRAFT MAY 2008 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
UNI EN ISO 8230-3 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
FD S61 508 : 2010 FD FIREFIGHTING AND RESCUE SERVICE VEHICLES - APPLICATION GUIDE OF NF EN 1846-2:2009
UNI EN 1870-19 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
UNI EN 16500 : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
UNI EN 13035-5 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
NF EN 14677 : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
BS EN 15774:2010 Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements
04/30117599 DC : DRAFT AUG 2004 IEC 61310-1 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
BS ISO 22968:2010 Forced draught oil burners
BS EN ISO 15012-4:2016 Health and safety in welding and allied processes. Equipment for capture and separation of welding fume General requirements
12/30248232 DC : DRAFT AUG 2012 BS EN 61400-2 - WIND TURBINES - PART 2: SMALL WIND TURBINES
EN 1218-5:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain
11/30248842 DC : 0 BS EN 50050-1:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
UNE-EN ISO 669:2017 Resistance welding - Resistance welding equipment - Mechanical and electrical requirements (ISO 669:2016)
03/306578 DC : DRAFT APR 2003 EN 14658 - CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
17/30341100 DC : 0 BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
17/30352678 DC : 0 BS IEC 63074 ED1.0 - SAFETY OF MACHINERY - SECURITY ASPECTS RELATED TO FUNCTIONAL SAFETY OF SAFETY-RELATED CONTROL SYSTEMS
12/30260942 DC : 0 BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 13856-1:2013-08 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
04/30106849 DC : DRAFT MAY 2004 EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
BS EN 61400-3:2009 Wind turbines Design requirements for offshore wind turbines
I.S. EN 692:2005 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
PREN 1672-1 : DRAFT 2012 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
ISO 21873-2:2009 Building construction machinery and equipment Mobile crushers Part 2: Safety requirements
UNI EN 13035-11 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
UNI EN 81-41 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
CEN/TR 16787:2014 Industrial Gas Installation - Guideline
14/30274816 DC : 0 BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
UNI EN ISO 13856-3 : 2013 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
NF EN 50374 : 2004 CONDUCTOR CARS
14/30285733 DC : 0 BS EN ISO 16092-1 - MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS
14/30297842 DC : 0 BS EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS
13/30278416 DC : 0 BS EN 61800-5-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
BS EN 1034-16:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Paper and board making machines
00/241099 DC : DRAFT MAR 2000 IEC 60079-17 EDITION 3 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
DIN EN ISO 16089 E : 2016 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015)
12/30257838 DC : 0 BS EN 62046 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
09/30198762 DC : 0 BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
08/30182209 DC : DRAFT SEP 2008 BS EN 12418 AMD1 - MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
DIN EN 12693:2016-10 (Draft) REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
EN 61800-2:2015 Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems
BS EN 378-1:2016 Refrigerating systems and heat pumps. Safety and environmental requirements Basic requirements, definitions, classification and selection criteria
09/30179758 DC : 0 BS EN 12044:2005/A1 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
08/30180312 DC : DRAFT MAR 2008 BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
CEI EN 61310-3 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
BS EN 60947-5-3:2013 Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
11/30237557 DC : 0 BS EN 1870-11 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
BS EN 62745:2017 Safety of machinery. Requirements for cableless control systems of machinery
12/30259421 DC : 0 BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
13/30291771 DC : DRAFT DEC 2013 BS EN 378-1 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
DIN EN 1807-2:2013-06 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013
BS 6751:1986 Guide for protection of machine tools intended for use in extreme environmental conditions
UNI EN 16191 : 2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
08/30186852 DC : DRAFT JULY 2008 BS EN ISO 4413 - HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
BS ISO 14990-2:2016 Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems Particular requirements for externally-powered machines
IEC 60974-8:2009 Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems
BS EN 1570-2:2016 Safety requirements for lifting tables Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s
03/306593 DC : DRAFT APR 2003 BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
12/30255086 DC : 0 BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
ISO/TR 24119:2015 Safety of machinery Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts
I.S. EN 12151:2007 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
BS EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines Common safety requirements
UNE-EN 691-1:2013 Safety of woodworking machines - Part 1: Common requirements
10/30202620 DC : 0 BS EN 62626-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR - ENCLOSED SWITCH FOR VARIOUS APPLICATIONS TO PROVIDE ISOLATION OF ELECTRICAL EQUIPMENT DURING REPAIR AND MAINTENANCE WORK
DIN EN 15949:2012-05 Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
04/30117619 DC : DRAFT AUG 2004 IEC 61310-3 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
DIN EN 15164:2008-09 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES
10/30230365 DC : 0 BS EN 50050-2 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
12/30243465 DC : 0 BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
04/30117615 DC : DRAFT AUG 2004 IEC 61310-2 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
PREN 1870-11 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
15/30295265 DC : 0 BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
UNI EN 15093 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
PREN 1889-1 : DRAFT 2010 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
16/30335973 DC : 0 BS ISO 19085-9 - WOODWORKING MACHINES - SAFETY - PART 9: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE)
UNI EN ISO 10821 : 2010 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
12/30259995 DC : 0 BS EN 12463 - FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ISO 16924:2016 Natural gas fuelling stations — LNG stations for fuelling vehicles
UNI EN ISO 8230-2 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 2: MACHINES USING PERCHLOROETHYLENE
04/30107715 DC : DRAFT JAN 2004 ISO 13850 - SAFETY OF MACHINERY - EMERGENCY STOP - PRINCIPLES FOR DESIGN
BS EN ISO 8230-2:2008 Safety requirements for dry-cleaning machines Machines using perchloroethylene
PREN 1953 : DRAFT 2011 ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
13/30278676 DC : 0 BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
17/30359101 DC : 0 BS ISO 21873-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS
09/30178325 DC : DRAFT FEB 2009 BS EN 1870-5:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 16327:2014-07 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
CSA E61496.1 :2004 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
CSA IEC 61400-24 : 2012 : R2017 WIND TURBINES - PART 24: LIGHTNING PROTECTION
PREN 12012-1 : DRAFT 2015 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS
PD ISO/TS 15066:2016 Robots and robotic devices. Collaborative robots
04/102838 DC : DRAFT JAN 2004 EN 692 - MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
BS EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material. Safety requirements
12/30270038 DC : 0 BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
DIN EN 1829-1:2010-05 High pressure water jet machines - Safety requirements - Part 1: Machines
09/30181664 DC : 0 BS EN 13035-4:2003/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
03/100498 DC : DRAFT JUNE 2003 IEC 60947-5-3 AMD 1. ED 1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDF)
08/30187719 DC : 0 BS EN 1493 - VEHICLE LIFTS
BS EN 15268:2008 Petrol filling stations. Safety requirements for the construction of submersible pump assemblies
I.S. EN 61326-3-1:2017 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS
BS EN 16743:2016 Food processing machinery. Automatic industrial slicing machines. Safety and hygiene requirements
03/118895 DC : 0 EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
CEI EN 50176 : 2010 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
09/30180290 DC : 0 BS EN 1247:2004/A1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
BS EN 61784-3-8:2010 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 8
CEI EN 61784-3-6 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-6: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 6
DIN EN ISO 14120:2016-05 SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS (ISO 14120:2015)
BS EN 61784-3:2010 Industrial communication networks. Profiles Functional safety fieldbuses. General rules and profile definitions
07/30161919 DC : 0 EN 940 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
13/30276223 DC : 0 BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
UNI EN ISO 28881 : 2013 MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES
09/30201429 DC : 0 BS EN 280 - MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATION AND TESTS
BS EN 13035-7 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
09/30178346 DC : 0 BS EN 1870-12:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
UNE-EN ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
03/314351 DC : 0 EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
BS EN 12693:2008 Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
BS EN 60940:2015 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression
BS EN 61784-3-1:2010 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 1
09/30201995 DC : 0 BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
04/301783 DC : DRAFT JAN 2004 EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES
I.S. EN 16932-1:2018 DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 1: GENERAL REQUIREMENTS
09/30192761 DC : 0 BS EN 115-2 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 2: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING ESCALATORS AND MOVING WALKS
I.S. EN 62061:2005 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS
10/30211242 DC : 0 BS EN 12601 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
BS EN 1672-1:2014 Food processing machinery. Basic concepts Safety requirements
CEI EN 60034-1 : 2015 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
CEI EN 60974-8 : 2011 ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS
09/30178328 DC : 0 BS EN 1870-6:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
BS EN 60519-9:2005 Safety in electroheat installations Particular requirements for high-frequency dielectric heating installations
05/19981971 DC : 0 BS EN 1034-4 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
PREN 15746-2 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
ANSI/ISO 12100-1 : 2007 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
05/30105282 DC : DRAFT MAY 2005 EN ISO 11161 - SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - GENERAL REQUIREMENTS
DIN EN ISO 4414:2011-04 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
DIN EN 15861 E : 2013 FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13035-7:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass (includes Amendment A1:2009)
DIN EN 1570-1:2015-01 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
I.S. EN 62485-3:2014 SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES
CSA C22.2 No. 301 : 2016 INDUSTRIAL ELECTRICAL MACHINERY
DIN EN ISO 4413:2011-04 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
UNI EN 16252 : 2013 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
IEC 60364-7-717:2009 Low-voltage electrical installations - Part 7-717: Requirements for special installations or locations - Mobile or transportable units
DIN EN 13035-1 E : 2008 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY
DIN EN ISO 18217 E : 2015 SAFETY OF WOODWORKING MACHINES - EDGEBANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
ISO 9386-1:2000 Power-operated lifting platforms for persons with impaired mobility — Rules for safety, dimensions and functional operation — Part 1: Vertical lifting platforms
EN ISO 19225:2017 Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)
IEEE 1799-2012 IEEE Recommended Practice for Quality Control Testing of External Discharges on Stator Coils, Bars, and Windings
PREN 1539 : DRAFT 2012 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
ISO 19085-1:2017 Woodworking machines Safety Part 1: Common requirements
PREN 1870-6 : DRAFT 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 61784-3:2016 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS
UNI EN 15165 : 2014 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 4254-14:2016 AGRICULTURAL MACHINERY - SAFETY - PART 14: BALE WRAPPERS (ISO 4254-14:2016)
ANSI B11.0 : 2015 SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT
I.S. EN ISO 14119:2013 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION (ISO 14119:2013)
BS EN ISO/IEC 80079-38 : 2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
I.S. EN 15164:2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
BS EN 50177 : 2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
I.S. EN 15746-2:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
16/30328759 DC : 0 BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
UNI EN 15268 : 2009 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
I.S. EN 1672-1:2014 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
I.S. EN 50156-1:2015 ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
BS EN 15061 : 2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
I.S. EN 15163:2017 MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
BS EN 13035-5 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
UNI EN ISO 10218-2 : 2011 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION
EN 61784-3:2016/A1:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS (IEC 61784-3:2016/A1:2017)
BS EN 61496-1:2013 Safety of machinery. Electro-sensitive protective equipment General requirements and tests
I.S. EN 15955-2:2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 16564:2014 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
ISO 12649:2004 Graphic technology Safety requirements for binding and finishing systems and equipment
UNE-EN 16327:2015 Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
PREN 17206 : DRAFT 2018 ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS)
PREN 12041 : DRAFT 2011 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
PREN 1974 : DRAFT 2016 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 60204-11 : 2001 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
IEC 62026-2:2008 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)
CEI EN 50570 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
ISO 7076-6:2016 Fire protection — Foam fire extinguishing systems — Part 6: Vehicle mounted compressed air foam systems
I.S. EN ISO 17916:2016 SAFETY OF THERMAL CUTTING MACHINES (ISO 17916:2016)
DIN EN 81-40:2009-04 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
PREN 12601 : DRAFT 2010 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
I.S. EN 13136:2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION
I.S. EN 13035-1:2008 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY
UNI EN 115-2 : 2010 SAFETY OF ESCALATORS AND MOVING WALKS - PART 2: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING ESCALATORS AND MOVING WALKS
I.S. EN 50177:2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
DIN EN 12042:2014-07 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 691-1:2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
BIS IS/IEC 61400-24 : 2010 WIND TURBINES - PART 24: LIGHTNING PROTECTION
BS EN ISO 14118:2018 Safety of machinery. Prevention of unexpected start-up
BS EN 62079:2001 Preparation of instructions. Structuring, content and presentation
UNE-EN 15861:2013 Food processing machinery - Smokehouses - Safety and hygiene requirements
UNI EN 15949 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
CSA C61400-2:2008 WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
ISO 10896-2:2016 Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks
BS EN 14511-4:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Operating requirements, marking and instructions
ISO 18665:2015 Traditional Chinese medicine Herbal decoction apparatus
17/30362886 DC : 0 BS EN 12609 - TRUCK MIXERS - SAFETY REQUIREMENTS
I.S. EN 60974-8:2009 ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS
UNI EN 12042 : 2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
IEC 62523:2010 Radiation protection instrumentation - Cargo/vehicle radiographic inspection system
ISO 14121:1999 Safety of machinery Principles of risk assessment
IEC 61326-3-1 : 2.0 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS
BS EN 61400-2:2014 Wind turbines Small wind turbines
UNE-EN 50569:2014 Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors
UNE-EN 62626-1:2014 Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
EN ISO 14118:2018 Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017)
NF EN 61400-1 : 2006 AMD 1 2015 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
NF EN 15166 : 2009 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1034-27 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
EN 81-22:2014 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path
CLC/TR 62685 : 2011 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010)
UNI EN 15774 : 2011 FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
PREN 289 : DRAFT 2012 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 61400-2:2014 WIND TURBINES - PART 2: SMALL WIND TURBINES
UNI EN ISO 13856-1 : 2013 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS
I.S. EN 60519-9:2005 SAFETY IN ELECTROHEAT INSTALLATIONS - PART 9: PARTICULAR REQUIREMENTS FOR HIGH-FREQUENCY DIELECTRIC HEATING INSTALLATIONS
UNI EN 12012-1 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
S.R. CEN/TR 115-3:2017 SAFETY OF ESCALATORS AND MOVING WALKS - PART 3: CORRELATION BETWEEN EN 115-1:2008+A1:2010 AND EN 115-1:2017
ISO 18646-1:2016 Robotics Performance criteria and related test methods for service robots Part 1: Locomotion for wheeled robots
NF EN 15339-2 : 2007 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS
IEC 61784-3-12:2010 Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12
IEC 61800-2:2015 Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable speed a.c. power drive systems
ISO/TR 18569:2004 Safety of machinery Guidelines for the understanding and use of safety of machinery standards
ISO 20966:2007 Automatic milking installations — Requirements and testing
DIN EN 203-1:2014-07 Gas heated catering equipment - Part 1: General safety rules
IEC TS 62046:2008 Safety of machinery - Application of protective equipment to detect the presence of persons
I.S. EN 61310-3:2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
I.S. EN 15268:2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
S.R. CWA 15902-1:2009 LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS)
IEC 60204-33:2009 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
DIN EN 1010-1:2011-06 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 1398:2009-07 DOCK LEVELLERS - SAFETY REQUIREMENTS
DIN EN 12215:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 1678:2011-02 Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 746-1:2010-02 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment (includes Amendment A1:2009)
DIN EN 12387:2010-03 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements (includes Amendment A1:2009)
DIN EN 12267:2011-02 Food processing machinery - Circular saw machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12268:2015-01 FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1034-22:2010-06 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood grinders (includes Amendment A1:2009)
DIN EN 1777:2010-06 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
DIN EN 1807:2010-02 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
DIN EN 13114:2010-03 Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009)
DIN EN 1493:2011-02 Vehicle lifts
DIN EN 12621:2011-07 Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
DIN EN 12957:2009-07 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
DIN EN 1870-14:2012-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
DIN EN 1674:2015-12 FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12203:2010-07 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; German version EN 12203:2003+A1:2009
DIN EN 12984:2011-02 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 13112:2011-03 Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009)
DIN EN 12463:2015-02 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements
DIN EN 1012-1:2011-02 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
DIN EN 12855:2011-02 Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12301:2015-12 (Draft) PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
DIN EN 12331:2015-12 Food processing machinery - Mincing machines - Safety and hygiene requirements
DIN EN 1870-10:2013-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN ISO 10472-4:2009-09 Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)
DIN EN 12417:2009-07 MACHINE TOOLS - SAFETY - MACHINING CENTRES
DIN EN 12581:2011-02 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010)
DIN EN 12981:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 1417:2015-03 Plastics and rubber machines - Two roll mills - Safety requirements; German version EN 1417:2014
DIN EN 14957 E : 2010 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13102:2009-05 CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
DIN EN 1870-13:2013-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
DIN EN 12418:2010-03 Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009)
DIN EN 1218-1:2010-02 Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table (includes Amendment A1:2009)
DIN EN 1870-8:2013-03 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
DIN EN 13379:2016-06 (Draft) PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 15027 E : 2010 TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
DIN EN ISO 10472-3:2009-10 Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)
DIN EN 13617-1:2012-08 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
DIN EN 620:2011-07 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials (includes Amendment A1:2010)
DIN EN 12159:2013-03 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
DIN EN 81-20 E : 2014 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
DIN EN 14010:2009-12 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009)
DIN EN 12001:2012-11 CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
DIN EN 14681:2010-10 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010)
DIN EN 14466:2008-09 FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
DIN EN ISO 8528-13 E : 2017 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016, CORRECTED VERSION 2016-10-15)
DIN EN 869:2009-12 Safety of machinery - Safety requirements for pressure metal diecasting units (includes Amendment A1:2009)
DIN EN 12041:2015-02 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 11553-1:2009-03 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
DIN EN 536:2016-01 ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
DIN EN 15027:2010-03 Transportable wall saw and wire saw equipment for job site - Safety (includes Amendment A1:2009)
DIN EN 693:2011-11 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
DIN EN ISO 8528-13:2014-09 (Draft) RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016, CORRECTED VERSION 2016-10-15)
DIN EN 13042-1 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
DIN EN 13035-4:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables (includes Amendment A1:2009)
DIN EN 14655:2010-11 Food processing machinery - Baguette slicers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 13042-5 E : 2009 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS -SAFETY REQUIREMENTS - PART 5: PRESSES
DIN EN 14656:2010-10 Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010)
DIN EN 13035-3:2010-02 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
DIN EN 13042-3:2010-05 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines (includes Amendment A1:2009)
DIN EN 12044:2010-03 Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements (includes Amendment A1:2009)
UNE-EN 289:2014 Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
BS EN 1870-2:1999 Safety of woodworking machines. Circular sawing machines Horizontal beam panel saws and vertical panel saws
BS EN 13570 : 2005 FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 1034-3:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders
BS EN 14673 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
BS EN ISO 16230-1:2015 Agricultural machinery and tractors. Safety of higher voltage electrical and electronic components and systems General requirements
BS EN 1175-1 : 1998 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS
ISO 10472-1:1997 Safety requirements for industrial laundry machinery Part 1: Common requirements
BS EN 1870-7:2012 Safety of woodworking machines. Circular sawing machines Single blade log sawing machines with integrated feed table and manual loading and/or unloading
BS EN 13355 : 2004 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
BS EN 940 : 2009 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
17/30370043 DC : 0 BS IEC 62026-2 AMD.1 ED.2.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I).
BS EN 61800-1:1998 Adjustable speed electrical power drive systems Rating specifications for low voltage adjustable speed d.c. power drive systems
UNE-EN 1870-10:2013 Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
BS EN 1760-3 : 2004 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
BS EN ISO 11111-1:2016 Textile machinery. Safety requirements Common requirements
IEC 61000-6-7:2014 Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations
BS EN 1034-14 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
15/30286839 DC : 0 BS ISO 14990-3 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 3: PARTICULAR REQUIREMENTS FOR SELF-POWERED MACHINES
BS EN 1175-3 : 1998 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
UNE-EN 1493:2011 Vehicle lifts
BS EN 12653 : 2000 FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
BS EN 13241-1 : 2003 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS
BS EN 12757-1 : 2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
EN 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
UNE-EN 1374:2001 Agricultural machinery. Silos stationary unloaders for round silos. Safety.
ISO 19859:2016 Gas turbine applications Requirements for power generation
BS EN 14812 : 2005 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
BS EN ISO 13849-2:2012 Safety of machinery. Safety-related parts of control systems Validation
BS EN 15095 : 2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
BS EN 12043:2014 Food processing machinery. Intermediate provers. Safety and hygiene requirements
BS EN 62485-3:2014 Safety requirements for secondary batteries and battery installations Traction batteries
BS EN 13379 : 2001 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 1777:2011 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
ISO 10472-4:1997 Safety requirements for industrial laundry machinery Part 4: Air dryers
BS EN 746-2:2010 Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
BS EN 12981 : 2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 13534 : 2006 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 13218 : 2002 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
BS EN 620 : 2002
13/30231511 DC : 0 BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS
UNE-EN 12547:2015 Centrifuges - Common safety requirements
BS EN ISO 10472-3:2008 Safety requirements for industrial laundry machinery Washing tunnel lines including component machines
UNE-EN 81-20:2017 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts
UNE-EN 13418:2013 Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
BS EN 12601:2010 Reciprocating internal combustion engine driven generating sets. Safety
UNE-EN 609-1:2017 Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters
I.S. EN 12215:2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN 1870-11:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
I.S. EN 12855:2003 FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1915-1:2001-06 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
I.S. EN 1034-2:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
I.S. EN 619:2002
I.S. EN 12418:2000 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
I.S. EN 13114:2002 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
I.S. EN 1870-8:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 13862:2002 FLOOR CUTTING-OFF MACHINES - SAFETY
I.S. EN 12312-20:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS
I.S. EN 14678-1:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
I.S. EN ISO 13849-2:2012 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
I.S. EN 12203:2003 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
I.S. EN 869:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
DIN EN 1218-4:2009-12 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
I.S. EN 14656:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
I.S. EN 13042-2:2004 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING
I.S. EN ISO 10472-6:2008 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 6: IRONING AND FUSING PRESSES
I.S. EN 289:2014 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 1248:2001 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
I.S. EN 1012-1:2010 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
EN 15746-2:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
I.S. EN 13035-9:2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
DIN EN 12012-2:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 13954:2005 FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 415-6:2013 SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
I.S. EN 1870-10:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 1248:2010-06 Foundry machinery - Safety requirements for abrasive blasting equipment (includes Amendment A1:2009)
I.S. EN 13288:2005 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13379:2001 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12622:2009 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
I.S. EN 12331:2015 FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13042-5:2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
I.S. EN 13012:2012 PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
I.S. EN 1846-2:2009 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE
I.S. EN 13885:2005 FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1034-13:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
I.S. EN 13113:2002 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
I.S. EN 12757-1:2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
I.S. EN 1808:2015 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
I.S. EN 61082-1:2015 PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES
I.S. EN 1218-2:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
I.S. EN 12629-2:2003 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 2: BLOCK MAKING MACHINES
I.S. EN 12158-1:2000 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
UNI EN 1673 : 2010 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12267:2003 FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 14511-4:2013-12 AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 4: OPERATING REQUIREMENTS, MARKING AND INSTRUCTIONS
DIN EN 1570:2009-12 SAFETY REQUIREMENTS FOR LIFTING TABLES
I.S. EN 1028-1:2002 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
EN 60947-5-5 : 1997 AMD 2 2016 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION (IEC 60947-5-5:1997/A2:2016)
I.S. EN 1870-12:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
DIN EN 1218-3:2009-12 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
I.S. EN 1034-22:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS
I.S. EN 422:2009 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 13042-1:2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
I.S. EN 1870-9:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSSCUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 13886:2005 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1870-3:2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
EN 61800-1:1998 Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems
I.S. EN 13861:2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
DIN EN 1870-1:1999-07 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
I.S. EN ISO 10472-4:2008 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 4: AIR DRYERS
I.S. EN 13621:2004 FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
Z462-18 Workplace electrical safety
I.S. EN 13378:2001 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13218:2010-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
EN 14222:2003 Stainless steel shell boilers
I.S. EN 15095:2007 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
I.S. EN 12043:2014 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
EN 16564:2014 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
I.S. EN 13035-4:2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
EN 1673:2000+A1:2009 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements
I.S. EN 1034-4:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
I.S. EN 13534:2006 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14957:2006 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12750:2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
I.S. EN 1034-6:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
I.S. EN 609-2:2000 AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 2: SCREW SPLITTERS
I.S. EN 14658:2005 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
I.S. EN 746-2:2010 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
I.S. EN 62282-2:2012 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV))
I.S. EN 1915-1:2013 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
DIN EN 1987-3:2000-07 ELECTRICALLY PROPELLED ROAD VEHICLES - SPECIFIC REQUIREMENTS FOR SAFETY - PART 3: PROTECTION OF USERS AGAINST ELECTRICAL HAZARDS
I.S. EN 1028-2:2002 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
I.S. EN 13102:2006 CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
I.S. EN 12409:2008 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
I.S. EN ISO 11252:2013 LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION (ISO 11252:2013)
I.S. EN 12044:2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
I.S. EN 13732:2013 FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE
DIN EN 13616:2004-09 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
UNI EN ISO 11553-1 : 2009 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS
I.S. EN 60825-4:2006 SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS
I.S. EN 12629-1:2000 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
I.S. EN 13035-3:2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
I.S. EN 12111:2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
I.S. EN 12348:2000 CORE DRILLING MACHINES ON STAND - SAFETY
I.S. EN 13418:2013 PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
I.S. EN 1870-15:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 1114-1:2011 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
I.S. EN 1870-17:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
I.S. EN 12921-3:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
I.S. EN 12621:2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
I.S. EN ISO 10472-1:2008 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
I.S. EN 453:2014 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1807:1999-10 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
DIN EN 13218:2002-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
I.S. EN ISO 11111-1:2016 TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016)
DIN EN 1034-1:2010-12 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (includes Amendment A1:2010)
I.S. EN 14681:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
DIN EN 1760-1:1997-09 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
I.S. EN 203-1:2014 GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES
EN 61400-1:2005/A1:2010 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
I.S. EN 12355:2003 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12268:2014 FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1034-7:2010-06 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests (includes Amendment A1:2009)
I.S. EN 12981:2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 1218-3:2002 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
I.S. EN 1034-5:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
I.S. EN ISO 14744-1:2008 WELDING - ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES - PART 1: PRINCIPLES AND ACCEPTANCE CONDITIONS
I.S. EN 1218-5:2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
I.S. EN 746-1:1997 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
I.S. EN 13355:2005 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
I.S. EN 378-3:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION
I.S. EN 1870-14:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
I.S. EN 500-1:2006 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS
I.S. EN 930:1998 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
I.S. EN 12852:2001 FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12978:2003 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
I.S. EN 1034-1:2000 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN 1493:2010 VEHICLE LIFTS
I.S. EN 13675:2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
I.S. EN 609-1:2017 AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS
I.S. EN ISO 13849-1:2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
I.S. EN 13985:2003 MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
I.S. EN 1539:2015 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
I.S. EN 617:2001
I.S. EN 1034-7:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
I.S. EN 1889-1:2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
I.S. EN 931:1998 FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
CEI EN 62282-2 : 2013 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
I.S. EN 13591:2005 FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1034-14:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
EN 710:1997+A1:2010/AC:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT
I.S. EN 1777:2010 HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
I.S. EN 201:2009 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 14466:2005 FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
I.S. EN 12984:2006 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1539:2016-02 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
I.S. EN 12779:2015 SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS
I.S. EN 13617-1:2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
I.S. EN ISO 11553-2:2008 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
I.S. EN 12041:2014 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1674:2015 FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1175-3:1998 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
I.S. EN 12012-3:2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
I.S. EN 12653:2000 FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
I.S. EN 14710-1:2005 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
I.S. EN 13042-3:2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
I.S. EN 809:1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
I.S. EN 14180:2014 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
DIN EN 13289:2013-05 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 15027:2007 TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
I.S. EN 13389:2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
EN 15571:2014 Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
DIN EN 61800-1 : 1999-08 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS; RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
I.S. EN 13870:2015 FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines
I.S. EN 940:2009 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
I.S. EN 1218-1:2000 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
I.S. EN 1010-1:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN 415-5:2006 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
DIN EN 15339-2:2007-06 Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units
DIN EN 1034-5:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters (includes Amendment A1:2009)
I.S. EN 12012-2:2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 12853:2001 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1422:2014 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
VDE 0160-101 : 1999-08 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
I.S. EN 12110:2014 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
I.S. EN 14044:2014 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
I.S. EN 1417:2014 PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS
I.S. EN 1247:2004 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
I.S. EN 12921-2:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 2: SAFETY OF MACHINES USING WATER BASED CLEANING LIQUIDS
I.S. EN 12159:2012 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
I.S. EN 741:2000 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS
EN 60825-1:2014/AC:2017-06 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
DIN EN 14180:2003-10 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
I.S. EN 1398:2009 DOCK LEVELLERS - SAFETY REQUIREMENTS
I.S. EN 12547:2014 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
DIN EN ISO 10821:2013-02 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009)
I.S. EN 12854:2003 FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13378:2013-05 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 14673:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
I.S. EN 536:2015 ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
I.S. EN 1953:2013 ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 13379:2013-05 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 746-3:1997 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES
I.S. EN 13112:2002 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
DIN EN 1034-4:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities (includes Amendment A1:2009)
I.S. EN 12001:2012 CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
I.S. EN 972:1998 TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
I.S. EN 14655:2005 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12753:2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 12387:2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
DIN EN 12012-2:2004-03 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 500-4:2011 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES
I.S. EN ISO 10472-5:2008 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 5: FLATWORK IRONERS, FEEDERS AND FOLDERS
DIN EN 1034-6:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender (includes Amendment A1:2009)
DIN EN 12957:2001-12 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
DIN EN 1845:2008-06 Footwear manufacturing machines - Footwear moulding machines - Safety requirements
I.S. EN 710:1998 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT
I.S. EN ISO 10472-2:2008 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 2: WASHING MACHINES AND WASHER-EXTRACTORS
I.S. EN 1175-1:1998 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS
I.S. EN 1845:2007 FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 620:2002
I.S. EN 1374:2000 AGRICULTURAL MACHINERY - SILOS STATIONARY UNLOADERS FOR ROUND SILOS - SAFETY
I.S. EN 280:2013 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
I.S. EN 1501-1:2011 REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
I.S. EN 1870-5:2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 1760-2:2001-07 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
I.S. EN ISO 13850:2015 SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015)
I.S. EN 1870-7:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 13457:2004 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
ANSI B11 TR4 : 2004 SELECTION OF PROGRAMMABLE ELECTRONIC SYSTEMS (PES/PLC) FOR MACHINE TOOLS
DIN EN 609-1:2017-04 AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 1: WEDGE SPLITTERS
I.S. EN 1501-2:2005 REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
I.S. EN 1756-2:2004 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS
I.S. EN 13390:2002 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 15746-2 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 12629-7:2004 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS
I.S. EN 1870-4:2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 1034-2:2010-09 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums (includes Amendment A1:2009)
I.S. EN ISO 10472-3:2008 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 3: WASHING TUNNEL LINES INCLUDING COMPONENT MACHINES
I.S. EN 415-7:2006 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
I.S. EN 12581:2006 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 12336:2010-03 TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 1034-3:2011 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
ANSI B11 TR6 : 2010 MACHINES - SAFETY CONTROL SYSTEM FOR MACHINE TOOLS
DIN EN ISO 16093:2017-10 Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
I.S. EN 13243:2015 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS
UNI EN 12387 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 453 : 2014 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 500-4 : 2011 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES
UNI EN ISO 10472-3 : 2009 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 3: WASHING TUNNEL LINES INCLUDING COMPONENT MACHINES
UNI EN 940 : 2012 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
UNI EN 13390 : 2010 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 14658 : 2010 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
BS 3065:2001 Resistance welding. Resistance welding equipment. Mechanical and electrical requirements
VDE 0113-301 : 1993 ELECTRICAL EQUIPMENT OF INDUSTRIAL MACHINES - PART 3: PARTICULAR REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
VDE 0721-911 : 1995 SAFETY IN ELECTROHEAT INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
NEMA IEC 60974-1 : 2008 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
VDI/VDE 2184:2008-06 Reliable operation and maintenance of field bus systems
VDE 0800-1 : 1989 TELECOMMUNICATIONS; GENERAL CONCEPTS; REQUIREMENTS AND TESTS FOR THE SAFETY OF FACILITIES AND APPARATUS
NEMA IEC 60974-8 : 2008 ARC WELDING EQUIPMENT - PART 8: GAS CONSOLES FOR WELDING AND PLASMA CUTTING SYSTEMS
VDI 3603:2002-11 Belt conveyors for bulk material - Take-up, bend and return stations
VDI 4464:2012-05 Operation of industrial trucks with RFID components
VDI 4412:2016-05 Cableless control of cranes
UNE-EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
CEI EN 50050-2 : 2014 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
DIN EN 15572 E : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
DIN EN 13035-5:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking (includes Amendment A1:2009)
05/30105911 DC : DRAFT JUN 2005 ISO 20966 - AUTOMATIC MILKING SYSTEMS - PERFORMANCE REQUIREMENTS AND TESTING
ISO/TR 14121-2:2012 Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods
I.S. EN 61000-6-7:2015 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL LOCATIONS
DIN EN 16474 E : 2015 PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
09/30182200 DC : 0 BS EN 500-1:2006/A1 - MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS
UNI EN 15861 : 2012 FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 691-1 : 2012 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
10/30219402 DC : 0 BS EN 13012 - PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
17/30347375 DC : 0 BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
11/30251717 DC : 0 BS EN 81-20 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
BS EN 15571:2014 Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines
12/30244783 DC : 0 BS EN ISO 13856-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
I.S. EN 285:2015 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
NF EN 60703 : 2009 TEST METHODS FOR ELECTROHEATING INSTALLATIONS WITH ELECTRON GUNS
DIN EN 13035-7 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
UNI EN 415-8 : 2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
DIN EN 16252:2013-03 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
PD ISO/TR 22100-3:2016 Safety of machinery. Relationship with ISO 12100 Implementation of ergonomic principles in safety standards
03/112610 DC : DRAFT AUG 2003 EN 14710-1 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY
11/30215034 DC : DRAFT MAR 2011 BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
04/30095682 DC : DRAFT APR 2004 IEC 60974-1 ED.3 - ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
15/30281259 DC : 0 BS ISO 18665 - TRADITIONAL CHINESE MEDICINE - HERBAL DECOCTION APPARATUS
11/30237560 DC : 0 BS EN 1870-12 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
BS EN 50050-2:2013 Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable coating powder
I.S. EN 13788:2002 MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
UNI EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
16/30339514 DC : 0 BS EN 17003 - ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS
14/30279234 DC : 0 BS EN 61800-7-202 ED 2.0 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-202: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - PROFILE TYPE 2 SPECIFICATION
I.S. EN 60974-1:2012 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES (IEC 60974-1:2012 (EQV))
DIN EN ISO 18217:2015-12 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
I.S. EN 848-1:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
13/30286103 DC : 0 BS EN 12331 - FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
12/30247814 DC : 0 BS EN 1034-27 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
PREN 1493 : DRAFT 2008 VEHICLE LIFTS
PREN 13617-1 : DRAFT 2010 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
11/30247811 DC : 0 BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
DIN EN 14511-4 E : 2013 AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 4: OPERATING REQUIREMENTS, MARKING AND INSTRUCTIONS
PREN 13871 : DRAFT 2012 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
NF EN 60519-7 : 2009 SAFETY IN ELECTROHEAT INSTALLATIONS - PART 7: PARTICULAR REQUIREMENTS FOR INSTALLATIONS WITH ELECTRON GUNS
I.S. EN 62026-2:2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) (IEC 62026-2:2008 (MOD))
PREN 13379 : DRAFT 2016 PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
BS ISO 17842-3:2015 Safety of amusement rides and amusement devices Requirements for inspection during design, manufacture, operation and use
NF EN 62061 : 2005 AMD 2 2015 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS
14/30302903 DC : 0 BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
02/540559 DC : DRAFT JULY 2002 EN 14466 - FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
BS EN 15162:2008 Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws
BS EN ISO 28881:2013 Machine tools. Safety. Electro-discharge machines
ISO/TS 15066:2016 Robots and robotic devices — Collaborative robots
09/30201246 DC : 0 BS EN 710:1997/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT ASSOCIATED EQUIPMENT
09/30175678 DC : 0 BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
11/30248856 DC : 0 BS EN 50059:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - HAND-HELD SPRAYING EQUIPMENT FOR NON-IGNITABLE COATING MATERIALS
15/30296744 DC : 0 BS EN 12013 - PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
16/30337802 DC : 0 BS EN 1974 - FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
14/30272245 DC : 0 BS EN ISO 16090-1 - MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS
BS EN 1870-18:2013 Safety of woodworking machines. Circular sawing machines Dimension saws
UNI EN 13136 : 2014 REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION
10/30232428 DC : DRAFT DEC 2010 BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
BS IEC 62523:2010 Radiation protection instrumentation. Cargo/vehicle radiographic inspection system
BS ISO 13105-2 : 2014 BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION
16/30343615 DC : 0 BS ISO 14955-4 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 4: PRINCIPLES FOR MEASURING METAL-FORMING MACHINE TOOLS AND LASER PROCESSING MACHINE TOOLS WITH RESPECT TO ENERGY EFFICIENCY
16/30323985 DC : 0 BS ISO 20690 - GRAPHIC TECHNOLOGY - GUIDELINES TO DETERMINE THE OPERATING POWER CONSUMPTION OF DIGITAL PRINTING DEVICES
BS EN 115-2:2010 Safety of escalators and moving walks Rules for the improvement of safety of existing escalators and moving walks
DIN EN 14677:2008-11 SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
DIN EN 1870-19 E : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
09/30175681 DC : 0 BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
DIN EN ISO 10218-1:2012-01 Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)
EN 1218-1:1999+A1:2009 Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table
BS ISO 20898:2008 Industrial trucks. Electrical requirements
NF EN 15164 : 2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES
12/30253907 DC : DRAFT JULY 2012 BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS
11/30251965 DC : 0 BS EN 453 - FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 15061:2009-05 Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008)
UNI EN ISO 10218-1 : 2012 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 1: ROBOTS
10/30233212 DC : 0 BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
11/30243078 DC : 0 BS EN 1034-16 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
12/30258755 DC : 0 BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
BS EN 15164:2008 Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain- and belt-slotting machines
BS EN 15165:2014 Food processing machinery. Forming machines. Safety and hygiene requirements
BS EN 1807-2:2013 Safety of woodworking machines. Band sawing machines Log sawing machines
09/30178391 DC : 0 BS EN 12779:2004/A1 - SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS
NF EN ISO 10218-1 : 2011 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 1: ROBOTS
04/30124456 DC : DRAFT OCT 2004 IEC 60519-9 ED.2 - SAFETY IN ELECTROHEAT INSTALLATIONS - PART 9: PARTICULAR REQUIREMENTS FOR HIGH-FREQUENCY DIELECTRIC HEATING INSTALLATIONS
BS EN 62626-1:2014 Low-voltage switchgear and controlgear enclosed equipment Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
CEI EN 61784-3-2 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-2: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 2
BS EN 60519-7:2009 Safety in electroheat installations Particular requirements for installations with electron guns
10/30232425 DC : DRAFT DEC 2010 BS EN 1870-15 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
BS EN 15572:2015 Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines
17/30364950 DC : 0 BS EN ISO 13851 - SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS AND DESIGN PRINCIPLES
12/30257298 DC : 0 BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
CEI EN 61400-3 : 2009 WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
BS EN 1010-2 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
10/30232431 DC : DRAFT DEC 2010 BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
BS EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment outside the factory
09/30178337 DC : 0 BS EN 1870-9:2000/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
BS EN 60079-17:2014 Explosive atmospheres Electrical installations inspection and maintenance
PREN 13204 : DRAFT 2015 DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
UNI EN 15094 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
17/30317170 DC : 0 BS EN ISO 20430 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
09/30182302 DC : 0 BS EN 1034-1:2000/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN 61784-3-12:2010 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 12
16/30354071 DC : 0 BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
DIN EN ISO 16093:2014-03 (Draft) MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
UNI EN ISO 8230-1 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
DD CLC/TS 62046:2008 Safety of machinery. Application of protective equipment to detect the presence of persons
17/30358655 DC : 0 BS EN 13136 - REFRIGERATING SYSTEMS AND HEAT PUMPS - PRESSURE RELIEF DEVICES AND THEIR ASSOCIATED PIPING - METHODS FOR CALCULATION
09/30181706 DC : 0 BS EN 12355:2003/A1 - FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 415-8:2008 Safety of packaging machines Strapping machines
14/30300670 DC : 0 BS ISO 17842-3 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 3: REQUIREMENTS FOR INSPECTION DURING DESIGN, MANUFACTURE, OPERATION AND USE
07/30172155 DC : DRAFT OCT 2007 BS EN 62047-5 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 5: RF MEMS SWITCHES
DIN EN 15165:2015-01 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
02/205333 DC : DRAFT MAY 2002
BS EN 1570-1 : 2011 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
14/30318350 DC : 0 BS EN 61326-3-1 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS
10/30219405 DC : 0 BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
UNE-EN 16282-2:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements
I.S. EN 1987-3:1998 ELECTRICALLY PROPELLED ROAD VEHICLES - SPECIFIC REQUIREMENTS FOR SAFETY - PART 3: PROTECTION OF USERS AGAINST ELECTRICAL HAZARDS
CEI EN 60079-17 : 2015 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
CEI EN 62745 : 1ED 2017 SAFETY OF MACHINERY - REQUIREMENTS FOR CABLELESS CONTROL SYSTEMS OF MACHINERY
04/30096910 DC : DRAFT OCT 2004 ISO 11553-2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND OPERATED LASER PROCESSING DEVICES
04/30110326 DC : DRAFT APR 2004 EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
BS EN 1034-17:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Tissue making machines
BS EN ISO 14120:2015 Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
BS EN ISO 13856-2:2013 Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
I.S. EN 15949:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
09/30181676 DC : 0 BS EN 13035-11:2006/A - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
CEI EN 50050-1 : 2014 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
BS EN 1807-1:2013 Safety of woodworking machines. Band sawing machines Table band saws and band re-saws
BS EN 50050-3:2013 Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable flock
CEI EN 61784-3-3 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-3: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 3
BS EN 50571:2013 Household and similar electrical appliances. Safety. Particular requirements for commercial electric washing machines
BS EN ISO 13856-3:2013 Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
12/30258099 DC BS EN 267. Forced draught burners for liquid fuels
BS EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material. Safety requirements
UNE-EN 50176:2010 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
DIN EN 15268 E : 2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
03/118991 DC : DRAFT DEC 2003 ISO 15817 - EARTH-MOVING MACHINERY - SAFETY REQUIREMENTS FOR REMOTE OPERATOR CONTROL
DIN EN 16743:2016-05 FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1034-21:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Coating machines
14/30295634 DC : 0 BS EN 16719 - TRANSPORT PLATFORMS
I.S. EN ISO 19085-6:2017 WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES ('TOUPIES') (ISO 19085-6:2017)
CEI EN 62282-3-100 : 2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
05/30134105 DC : DRAFT MAY 2005 IEC 61800-5-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
11/30237563 DC : 0 BS EN 1870-10 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 15094:2009-04 Safety of machinery - Safety requirements for cold flat rolling mills
10/30214958 DC : 0 BS EN 1915-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
DIN EN 16191:2014-09 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
13/30248785 DC : 0 BS EN 61800-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE FREQUENCY A.C. POWER DRIVE SYSTEMS
UNE-EN 61400-2:2015 Wind turbines - Part 2: Small wind turbines
09/30197747 DC : 0 BS ISO 10218-1 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS - PART 1: INDUSTRIAL ROBOT
15/30290190 DC : 0 BS ISO 6858 - AIRCRAFT - GROUND SUPPORT ELECTRICAL SUPPLIES - GENERAL REQUIREMENTS
UNI EN 16327 : 2014 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
BS ISO 18665:2015 Traditional Chinese medicine. Herbal decoction apparatus
DIN EN ISO 10218-2:2012-06 Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)
02/204779 DC : DRAFT JULY 2002 IEC 61241-17 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
PD CEN/TR 16787:2014 Industrial Gas Installation. Guideline
UNE-EN 16564:2015 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
13/30263816 DC : 0 BS EN ISO 17916 - SAFETY OF THERMAL CUTTING MACHINES
EN 115-1:2017 Safety of escalators and moving walks - Part 1: Construction and installation
15/30283323 DC : 0 BS ISO 18646-1 - ROBOTS AND ROBOTIC DEVICES - PERFORMANCE CRITERIA AND RELATED TEST METHODS FOR SERVICE ROBOT - PART 1: LOCOMOTION FOR WHEELED ROBOTS
BS EN 15094:2008 Safety of machinery. Safety requirements for cold flat rolling mills
UNE-EN 16474:2015 Plastics and rubber machines - Tyre curing machines - Safety requirements
14/30263884 DC : 0 BS EN ISO 16093 - MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
12/30258147 DC : 0 BS EN 203-1 - GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES
XP ISO/TS 22595-1 : 2007 XP DENTISTRY - PLANT AREA EQUIPMENT - PART 1: SUCTION SYSTEMS
12/30260302 DC : 0 BS EN 12268 - FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
05/19981967 DC : 0 BS EN 1034-6 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: PULPERS
BS EN 61310-3:2008 Safety of machinery. Indication, marking and actuation Requirements for the location and operation of actuators
BS ISO 12648:2006 Graphic technology. Safety requirements for printing press systems
BS EN 16191:2014 Tunnelling machinery. Safety requirements
15/30324456 DC : 0 BS EN 16147 - HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS
04/30110212 DC : DRAFT MAR 2004 ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
05/30133333 DC : DRAFT MAY 2005 EN 860 - SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
DIN EN ISO 8230-3:2009-05 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
BS EN 1012-3:2013 Compressors and vacuum pumps. Safety requirements Process compressors
17/30293124 DC : 0 BS ISO 19880-2 - GASEOUS HYDROGEN - FUELING STATIONS - PART 2: DISPENSERS
09/30209618 DC : 0 BS ISO 5149-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
12/30262929 DC : 0 BS EN 15339-1 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 1: GENERAL REQUIREMENTS
08/30183861 DC : DRAFT SEP 2008 BS EN 13732 - FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARM - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE
09/30182215 DC : 0 BS EN 12001:2003/A1 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
PREN 16191 : DRAFT 2010 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
DIN EN 16474:2015-08 PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
BS ISO 21789:2009 Gas turbine applications — Safety
09/30178343 DC : 0 BS EN 1870-11:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
BS 6854-1:1987 Code of practice for safeguarding woodworking machines General recommendations
CSA E61496.1 : 2004 : R2013 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
05/30133297 DC : DRAFT MAY 2005 EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
BS EN 60974-1:2012 Arc welding equipment Welding power sources
UNE-EN 60034-1:2011 Rotating electrical machines - Part 1: Rating and performance
08/30178382 DC : 0 BS EN 1218-4:2004/A2 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
I.S. EN 50628:2016 ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
A-A-59334 Base Document:1999 Lathe, Engine (Standard) and Toolroom (Precision), Horizontal Spindle
BS EN 60034-1:2010 Rotating electrical machines Rating and performance
ISO 16092-1:2017 Machine tools safety — Presses — Part 1: General safety requirements
UNE-EN 1807-1:2013 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
CSA Z431 : 2012 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
09/30193520 DC : 0 BS EN 60947-5-3 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDF)
DIN EN 415-10:2014-07 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
ISO 19085-6:2017 Woodworking machines Safety Part 6: Single spindle vertical moulding machines ("toupies")
EN 61784-3-8:2017 Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8
ISO 16369:2007 Elevating work platforms Mast-climbing work platforms
IEC 61784-3-18:2011+AMD1:2016 CSV Industrial communication networks - Profiles - Part 3-18: Functionalsafety fieldbuses - Additional specifications for CPF 18
CSA C22.2 No. 60950.23 : 2007 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
CEI CLC/TR 62685 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS)
EN 16252:2012 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
PREN 12779 : DRAFT 2014 SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
DIN EN 14753:2008-03 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
IEC 61784-3-3:2016 Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3
UNI EN 1034-8 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
PREN 50570 : DRAFT 2011 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
EN ISO 16090-1:2018 Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017)
IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control
UNE-EN 1870-6:2003 Safety of woodworking machines. Circular sawing machines. Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading.
IEC PAS 80005-3:2014 Utility connections in port - Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements
ISO/TR 22100-3:2016 Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards
16/30328762 DC : 0 BS EN 13814-3 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 3: REQUIREMENTS FOR INSPECTION DURING DESIGN, MANUFACTURE, OPERATION AND USE
BS EN 61784-3-18 : 2011 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18 (IEC 61784-3-18:2011)
I.S. EN 115-1:2017 SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION
I.S. EN ISO 14120:2015 SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS (ISO 14120:2015)
I.S. EN 50050-1:2013 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
I.S. EN 61241-17:2005 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
UNI EN 1807-2 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
I.S. EN 50050-2:2013 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
BS EN 60947-5-5:1998 Low-voltage switchgear and controlgear Control circuit devices and switching elements. Electrical emergency stop devices with mechanical latching function
CSA C61400-2 : 2008 : R2013 WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
I.S. EN 60947-5-3:2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB)
ISO 23570-2:2005 Industrial automation systems and integration - Distributed installation in industrial applications Part 2: Hybrid communication bus
UNI 11324 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - MOUNTED, SEMI-MOUNTED AND TRAILED BALE WRAPPERS - SAFETY
I.S. EN 15572:2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
EN 61326-3-1:2017 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
I.S. EN 15339-2:2007 THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS
NF EN ISO 10218-2 : 2011 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEM AND INTEGRATION
I.S. EN 60079-17:2014 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
I.S. EN 61439-1:2011 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
UNI EN 415-10 : 2014 SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
HD 384.4.46 : 200S2 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 46: ISOLATION AND SWITCHING
IEC 61082-1 REDLINE : 3ED 2014 PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES
ISO 19085-5:2017 Woodworking machines Safety Part 5: Dimension saws
I.S. EN 61784-3-6:2010 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-6: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 6
I.S. EN 14753:2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
UNE-EN ISO 10218-2:2011 Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)
I.S. EN 16743:2016 FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ANSI/ASSP Z244.1:2016 THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS
I.S. EN 15954-2:2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 16774:2016 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
I.S. EN 61784-3-3:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-3: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 3
I.S. EN 60417-1:2002 GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 1: OVERVIEW AND APPLICATION
ISO/TS 20100:2008 Gaseous hydrogen Fuelling stations
UNE-EN ISO 4254-14:2016 Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016)
I.S. EN 81-41:2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
I.S. EN ISO 13856-2:2013 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
I.S. EN 16327:2014 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
I.S. EN 1870-18:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
16/30338566 DC : 2016-06 BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
NF EN 81-41 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
I.S. EN 1034-21:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
BS EN 16147:2017 Heat pumps with electrically driven compressors. Testing, performance rating and requirements for marking of domestic hot water units
EN 14511-4:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 4: Requirements
I.S. EN 50348:2010 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 81-40:2008 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
EN 12042 : 2014 COR 2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13616-1:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
I.S. EN ISO 16093:2017 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
UNI EN 81-31 : 2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
CEI EN 61784-3-14 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-14: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 14
UNE-EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines
BS EN ISO 16089:2015 Machine tools. Safety. Stationary grinding machines
UNE-EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
BS ISO 6858:2017 Aircraft. Ground support electrical supplies. General requirements
I.S. EN 12013:2018 PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
I.S. EN 1501-5:2011 REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES
PREN 1870-10 : DRAFT 2011 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
PREN 16985 : DRAFT 2016 SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS
PREN 50059 : DRAFT 2011 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - HAND-HELD SPRAYING EQUIPMENT FOR NON-IGNITABLE COATING MATERIALS
UNE-EN 1870-14:2008 Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
UNI EN 1034-16 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
PREN 12301 : DRAFT 2015 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
PREN 50569 : DRAFT 2011 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
UNI EN 13035-7 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
EN ISO 19085-1:2017/AC:2018 WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
EN ISO 19085-5:2017 Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017)
ISO/TR 14799-1:2015 Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison
ISO 21927-10:2011 Smoke and heat control systems — Part 10: Specification for power output devices
ISO 19372:2015 Microturbines applications — Safety
ISO 17842-2:2015 Safety of amusement rides and amusement devices Part 2: Operation and use
DIN EN 12921-1:2011-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
EN ISO/IEC 80079-38:2016 Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Part 1: Safety
EN 16932-1:2018 Drain and sewer systems outside buildings - Pumping systems - Part 1: General requirements
ISO 15998:2008 Earth-moving machinery Machine-control systems (MCS) using electronic components Performance criteria and tests for functional safety
I.S. EN 15162:2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
NF EN 14222 : 2003 STAINLESS STEEL SHELL BOILERS
IEC 60974-1:2017 Arc welding equipment - Part 1: Welding power sources
ISO/TR 17529:2014 Machine tools Practical guidance and example of risk assessment on electro-discharge machines
I.S. EN 12301:2000 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
EN 61784-3-12:2010 Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12
I.S. EN ISO 8230-2:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 2: MACHINES USING PERCHLOROETHYLENE
DIN EN 13862:2010-03 Floor cutting-off machines - Safety (includes Amendment A1:2009)
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
I.S. EN 61310-2:2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
IEC TR 62685:2010 Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs)
I.S. EN 14886:2008 PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
IEC TS 62081:1999 Arc welding equipment - Installation and use
IEC 61784-3 REDLINE : 3ED 2016 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS
I.S. EN 60204-11:2000 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
UNI EN 81-20 : 2014 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
DIN EN 1710:2008-08 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
DIN EN 746-2:2011-02 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
DIN EN 1870-11:2014-02 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN ISO 10472-5:2009-09 Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)
DIN EN 12750:2013-05 Safety of woodworking machines - Four sided moulding machines
DIN EN ISO 14744-1:2008-09 WELDING - ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES - PART 1: PRINCIPLES AND ACCEPTANCE CONDITIONS
DIN EN 1247:2010-12 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines (includes Amendment A1:2010)
DIN EN 1953:2013-12 ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 12348:2010-01 Core drilling machines on stand - Safety (includes Amendment A1:2009)
DIN EN ISO 10472-1:2009-10 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
UNI EN 1501-2 : 2010 REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
DIN EN 12312-20:2009-08 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS
DIN EN ISO 10472-2:2009-10 Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)
DIN EN 13208:2011-02 Food processing machinery - Vegetable peelers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 1870-17:2015-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 12853:2012-02 Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12355:2011-02 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 12622:2014-02 Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013)
DIN EN ISO 10472-6:2009-10 Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)
DIN EN 12547:2014-12 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
DIN EN 12649:2011-09 Concrete compactors and smoothing machines - Safety
DIN EN 1808:2015-08 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
DIN EN 1870-15:2013-01 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
DIN EN 746-4:2000-05 Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment; English version of DIN EN 746-4
DIN EN 12854:2010-12 Food processing machinery - Beam mixers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 1034-13:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units (includes Amendment A1:2009)
DIN EN 13113:2011-05 Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010)
DIN EN 12779:2016-03 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
DIN EN 13035-3 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
DIN EN 848-3:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
DIN EN 13035-9 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
DIN EN 13954:2010-12 Food processing machinery - Bread slicers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 13736:2009-11 SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
DIN EN 13861:2012-01 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
DIN EN 692:2009-10 Machine tools - Mechanical presses - Safety (includes Amendment A1:2009)
DIN EN 848-1:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
DIN EN 15095 E : 2009 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
DIN EN 13870:2015-12 Food processing machinery - Portion cutting machines - Safety and hygiene requirements
DIN EN 454:2015-02 Food processing machinery - Planetary mixers - Safety and hygiene requirements
DIN EN 422:2009-10 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
DIN EN 285:2016-05 Sterilization - Steam sterilizers - Large sterilizers
DIN EN 676:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 930:2010-07 Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements (includes Amendment A2:2009)
DIN EN ISO 11553-2:2009-03 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
DIN EN 12629-1:2011-01 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 848-2:2013-01 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
UNE-EN 710:1998 SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT.
DIN EN 13885:2011-02 Food processing machinery - Clipping machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 15067 E : 2008 PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
DIN EN 13985:2009-11 Machine tools - Safety - Guillotine shears (includes Amendment A1:2009)
DIN EN 931:2010-07 Footwear manufacturing machines - Lasting machines - Safety requirements (includes Amendment A2:2009)
DIN EN 14466 E : 2008 FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
DIN EN 14655 E : 2010 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 14812 E : 2007 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
DIN EN 741:2011-06 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials (includes Amendment A1:2010)
DIN EN 14658:2010-06 Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining (includes Amendment A1:2010)
DIN EN 14673:2010-10 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010)
DIN EN 12043:2015-02 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12110:2014-10 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
DIN EN 13035-9:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations (includes Amendment A1:2010)
DIN EN 13042-3 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
DIN EN ISO 16230-1:2016-08 AGRICULTURAL MACHINERY AND TRACTORS - SAFETY OF HIGHER VOLTAGE ELECTRICAL AND ELECTRONIC COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS (ISO 16230-1:2015)
BS EN 848-1 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
I.S.EN ISO 8528-13:2016&LC:2016 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO/DIS 8528-13:2014)
IEC 60703:2008 Test methods for electroheating installations with electron guns
BS EN 746-8:2000 Industrial thermoprocessing equipment Particular safety requirements for quenching equipment
UNE-EN 15954-2:2014 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
BS EN ISO 12100-1 : 2003 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
BS EN 12752-1:1999 Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW Safety
BS EN 12629-1 : 2001 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
BS EN ISO 10472-5:2008 Safety requirements for industrial laundry machinery Flatwork ironers, feeders and folders
BS EN 1417:2014 Plastics and rubber machines. Two-roll mills. Safety requirements
BS EN 1218-2 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
UNE-EN 1889-1:2012 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
ISO 10472-2:1997 Safety requirements for industrial laundry machinery Part 2: Washing machines and washer-extractors
IEC 60947-5-3:2013 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
IEC 61784-3-6:2010 Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6
BS EN 13898 : 2003 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
UNE-EN 12331:2016 Food processing machinery - Mincing machines - Safety and hygiene requirements
UNE-EN 15955-2:2014 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
BS EN 12355 : 2003 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 13012:2012 Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers
BS EN 1010-1 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN 746-1 : 1997 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
BS EN 861 : 2007 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
BS EN 746-3 : 1997 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES
04/30123347 DC : DRAFT OCT 2004 IEC 61439-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
BS EN 1034-5 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
13/30280565 DC : 0 BS EN ISO 16230-1 - AGRICULTURAL MACHINERY AND TRACTORS - SAFETY OF HIGHER VOLTAGE ELECTRICAL AND ELECTRONIC COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN 13102 : 2005 CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
BS EN 12921-3 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
BS EN 12215 : 2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
IEC 60519-9:2005 Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations
IEC 62135-1:2015 Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation
09/30182290 DC : 0 BS EN 746-1:1997/A1 - INDUSTRIAL THERMO PROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMO PROCESSING EQUIPMENT
IEC 60947-5-8:2006 Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches
BS EN 12325-2:1999 Irrigation techniques. Centre pivot and moving lateral systems Minimum performances and technical characteristics
UNE-EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
UNE-EN 60825-1:2015 Safety of laser products - Part 1: Equipment classification and requirements
BS EN 848-2 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
ISO 16230-1:2015 Agricultural machinery and tractors Safety of higher voltage electrical and electronic components and systems Part 1: General requirements
DIN EN 13042-2 E : 2009 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING
DIN EN 14957:2010-11 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements (includes Amendment A1:2010)
BS EN 81-22:2014 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Electric lifts with inclined path
UNE-EN 81-22:2014 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path
ISO 17916:2016 Safety of thermal cutting machines
DIN EN 1889-1:2011-10 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
BS EN 1034-3:2011 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Rereelers and winders
BS EN 12753 : 2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
BS EN 12151:2007 Machinery and plants for the preparation of concrete and mortar. Safety requirements
BS EN 741 : 2000 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS
18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
UNE-EN 378-3:2017 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
IEC 61241-17:2005 Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)
IEC 61784-3:2016 RLV Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions
BS EN 809 : 1998 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
IEC 62282-5-1:2012 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety
BS EN 12649 : 2008 CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
BS EN 1539:2015 Dryers and ovens, in which flammable substances are released. Safety requirements
BS EN ISO 15616-1:2003 Acceptance tests for CO<sub>2</sub>- laser beam machines for high quality welding and cutting General principles, acceptance conditions
BS EN 1570 : 1999 SAFETY REQUIREMENTS FOR LIFTING TABLES
EN ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15)
CEI EN 60519-1 : 2016 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
UNE-EN 848-1:2008 Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines
EN 14803 : 2006 IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
CEI EN 62026-2 : 2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I)
I.S. EN 60825-1:2014 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
EN 809 : 1998 COR 2010 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
EN 809:1998+A1:2009 Pumps and pump units for liquids - Common safety requirements
UNI EN 13525 : 2010 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
CSA C22.2 No. 272 : 2014 WIND TURBINE ELECTRICAL SYSTEMS
UNE-EN 848-3:2013 Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines
ONORM EN ISO 11553-1 : 2009 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS
I.S. EN 14803:2006 IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
UNE-EN 13241-1:2004 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
UNE-EN 693:2001 Machine tools - Safety - Hydraulic presses
EN 81-40:2008 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
I.S. EN 848-2:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
UL 60950-23:1ED 2007-04 Information Technology Equipment - Safety - Part 23: Large Data Storage Equipment
I.S. EN 1612-1:1998 PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 1: SAFETY REQUIREMENTS FOR METERING AND MIXING UNITS
DIN EN 13241-1:2011-06 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS
UNE-EN 60947-5-5:1999 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS. ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION.
EN 61496-1:2013/AC:2015 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012)
EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
EN 13985:2003+A1:2009 Machine tools - Safety - Guillotine shears
EN ISO 14744-1:2008 Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2008)
EN 15848:2010 Water conditioning equipment inside buildings - Adjustable chemical dosing systems - Requirements for performance, safety and testing
EN 1870-15:2012 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
EN 1570:1998+A2:2009 Safety requirements for lifting tables
UNI EN 13617-1 : 2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
EN ISO 16093:2017 Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products
EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
EN 13886:2005+A1:2010 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements
EN ISO 15012-4:2016 Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016)
UNI EN 12629-3 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 3: SLIDE AND TURNTABLE MACHINES
UNI EN 12921-1 : 2010 MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 14655 : 2010 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 12100-1 : 2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
UNI EN ISO 10472-6 : 2009 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 6: IRONING AND FUSING PRESSES
UNI EN 12001 : 2012 CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
UNI EN 13042-2 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING
UNI EN 14677 : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
UNI EN 13379 : 2013 PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13035-9 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
UNI EN 1012-1 : 2010 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
UNI EN 13288 : 2010 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 11252 : 2013 LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION
UNI EN 1870-13 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
UNI EN 13035-4 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
UNI EN 12581 : 2010 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 1010-1 : 2011 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
UNI EN 1870-8 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
UNI EN 14710-1 : 2009 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
UNI EN 1889-1 : 2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
UNI EN 13042-1 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
UNI EN 809 : 2009 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
UNI EN 619 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF UNIT LOADS
UNI EN 1846-2 : 2013 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE
UNI EN 12203 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
UNI EN 15095 : 2009 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
UNI EN 14957 : 2010 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13113 : 2010 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
UNI EN 13241-1 : 2011 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS
UNI EN 1114-3 : 2009 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
UNI EN 609-2 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 2: SCREW SPLITTERS
UNI EN 12159 : 2013 BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
UNI EN 972 : 2010 TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
UNI EN 1175-1 : 2010 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS
UNI EN 13621 : 2010 FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1870-15 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
UNI EN 13886 : 2010 FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 500-1 : 2010 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS
UNI EN 13736 : 2009 SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
EN 12312-20:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units
UNI EN 15027 : 2009 TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
UNI EN 13862 : 2009 FLOOR CUTTING-OFF MACHINES - SAFETY
UNI EN 15954-2 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 13208 : 2010 FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13977 : 2011 RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
UNI EN 692 : 2009 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
UNI EN 848-3 : 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
UNI EN 1398 : 2009 DOCK LEVELLERS - SAFETY REQUIREMENTS
UNI EN ISO 14744-1 : 2009 WELDING - ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES - PART 1: PRINCIPLES AND ACCEPTANCE CONDITIONS
UNI EN 12750 : 2013 SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
EN 617:2001+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
UNI EN 1570 : 2009 SAFETY REQUIREMENTS FOR LIFTING TABLES
UNI EN 1114-1 : 2011 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
UNI EN ISO 12100-2 : 2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
UNI EN 12921-2 : 2009 MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 2: SAFETY OF MACHINES USING WATER BASED CLEANING LIQUIDS
UNI EN 1612-1 : 2008 PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 1: SAFETY REQUIREMENTS FOR METERING AND MIXING UNITS
UNI EN 13367 : 2009 CERAMIC MACHINES - SAFETY - TRANSFER PLATFORMS AND CARS
UNI EN 746-3 : 2009 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES
UNI EN 617 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
UNI EN 1845 : 2008 FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 14673 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
UNI EN 1870-16 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
UNI EN 15061 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
UNI EN 13035-3 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
UNI EN 860 : 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANNING MACHINES
UNI EN 1028-1 : 2008 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
UNI EN 415-6 : 2013 SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
UNI EN 13457 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
UNI EN 12981 : 2009 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 12852 : 2010 FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1010-2 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
UNI EN 12267 : 2010 FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13871 : 2014 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1028-2 : 2008 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
UNI EN 12855 : 2010 FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12649 : 2011 CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY
UNI EN 12653 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
UNI EN 953 : 2009 SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
UNI EN 12417 : 2009 MACHINE TOOLS - SAFETY - MACHINING CENTRES
UNI EN ISO 10472-2 : 2009 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 2: WASHING MACHINES AND WASHER-EXTRACTORS
UNI EN 13389 : 2010 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 15067 : 2008 PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
UNI EN 12547 : 2014 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
UNI EN 201 : 2010 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 1012-3 : 2014 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
UNI EN 14466 : 2008 FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
UNI EN 13378 : 2013 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12012-3 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
UNI EN 13418 : 2013 PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
UNI EN 859 : 2012 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
UNI EN 12757-1 : 2010 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
UNI EN 1218-4 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
UNI EN 13112 : 2010 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
UNI EN 12629-2 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 2: BLOCK MAKING MACHINES
UNI EN ISO 11553-2 : 2009 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES
UNI EN 848-1 : 2013 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
UNI EN 12978 : 2009 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
UNI EN 12629-1 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS
UNI EN 12601 : 2011 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
UNI EN 13042-3 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
UNI EN 13861 : 2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
UNI EN 1915-1 : 2014 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
UNI EN 12043 : 2015 FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS
EN 1870-11:2013 Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
UNI EN 710 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT
UNI EN 1870-9 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
UNI EN 1034-7 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
UNI EN 1756-2 : 2009 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS
UNI EN 14656 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
UNI EN 12984 : 2010 FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1034-6 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
UNI EN 1870-12 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
UNI EN 983 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
UNI EN 12418 : 2009 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
UNI EN 415-5 : 2010 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
UNI EN 1493 : 2010 VEHICLE LIFTS
UNI EN 1678 : 2010 FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1870-14 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
UNI EN 13885 : 2010 FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
EN 1034-27:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems
UNI EN 13534 : 2010 FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1870-10 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
EN 860:2007+A2:2012 Safety of woodworking machines - One side thickness planing machines
UNI EN 1870-11 : 2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
UNI EN 1953 : 2013 Atomising and spraying equipment for coating materials - Safety requirements
UNI EN 13898 : 2009 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
UNI EN 454 : 2015 FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13616 : 2004 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
UNI EN 1870-4 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
UNI EN 746-2 : 2011 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
UNI EN 1870-1 : 2009 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
UNI EN 1760-2 : 2009 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
UNI EN 12409 : 2011 PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS
UNI EN 12041 : 2015 FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12753 : 2010 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 982 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
UNI EN 13218 : 2008 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
UNI EN 1247 : 2010 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
UNI EN 13042-5 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
UNI EN 12629-7 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS
UNI EN 931 : 2010 FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
UNI EN 848-2 : 2013 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
UNI EN 1777 : 2010 HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING
UNI EN 1175-3 : 2010 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS
UNI EN 930 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
UNI EN 12336 : 2009 TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 869 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
UNI EN 1034-2 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
UNI EN 12044 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
UNI EN 12111 : 2014 TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
UNI EN 13289 : 2013 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 14070 : 2009 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
UNI EN 14180 : 2014 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
UNI EN ISO 10472-1 : 2009 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
UNI EN 693 : 2011 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
UNI EN 1422 : 2014 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
UNI EN 14043 : 2014 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
UNI EN 15955-2 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 14010 : 2009 SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES
UNI EN 13985 : 2009 MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
UNI EN 12629-8 : 2010 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 8: MACHINES AND EQUIPMENT FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CALCIUM-SILICATE (AND CONCRETE)
UNI EN 12957 : 2009 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
UNI EN 861 : 2012 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
UNI EN 1248 : 2009 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
UNI EN 1710 : 2008 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
UNI EN 1760-1 : 2009 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
UNI EN 1034-5 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
UNI EN 12012-2 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
UNI EN ISO 10472-4 : 2009 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 4: AIR DRYERS
UNI EN 12348 : 2009 CORE DRILLING MACHINES ON STAND - SAFETY
UNI EN 14678-1 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
UNI EN 12110 : 2014 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
UNI EN 14886 : 2008 PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
UNI EN 13355 : 2009 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
UNI EN 12268 : 2014 FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1247 : 2004 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
UNI EN 12215 : 2010 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
UNI EN 1034-14 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
UNI EN ISO 13849-2 : 2013 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
UNI EN 12921-3 : 2009 MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
UNI EN 13102 : 2009 CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
UNI EN 422 : 2009 PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 12621 : 2010 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
CSA CE CODE SAFETY PACKAGE : 2012 CE CODE SAFETY PACKAGE
UNI EN 13570 : 2010 FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12355 : 2010 FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 415-7 : 2008 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
UNI EN 1374 : 2010 AGRICULTURAL MACHINERY - SILOS STATIONARY UNLOADERS FOR ROUND SILOS - SAFETY
UNI EN 14044 : 2014 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
UNI EN ISO 14119 : 2013 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
UNI EN 741 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS
UNI EN 1034-3 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
UNI EN 1870-5 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
UNI EN 1218-3 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
UNI EN ISO 11161 : 2010 SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS
UNI EN 289 : 2014 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 13675 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
UNI EN 1760-3 : 2009 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
UNI EN 1034-13 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
UNI EN 676 : 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
UNI EN ISO 5826 : 2014 RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - GENERAL SPECIFICATIONS APPLICABLE TO ALL TRANSFORMERS
UNI EN 1034-22 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS
UNI EN 13591 : 2010 FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1870-7:2012 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
UNI EN 13114 : 2010 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
UNI EN 12622 : 2014 SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
UNI EN 14681 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
UNI EN ISO 10472-5 : 2009 SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 5: FLATWORK IRONERS, FEEDERS AND FOLDERS
UNI EN 746-1 : 2009 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
UNE-EN 50223:2016 Stationary electrostatic application equipment for ignitable flock material - Safety requirements
CSA E60974.1 : 2012 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
ISO/TR 20218-2:2017 Robotics Safety design for industrial robot systems Part 2: Manual load/unload stations
UNI EN 15164 : 2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
UNI EN 1807-1 : 2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
BS ISO 16368:2003 Mobile elevating work platforms. Design calculations, safety requirements and test methods
BS EN 16564:2014 Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
BS EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements
13/30271404 DC : DRAFT DEC 2013 BS ISO 16923 - NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES
14/30293313 DC : 0 BS EN ISO 19085-2 - WOODWORKING MACHINES - SAFETY - PART 2: HORIZONTAL BEAM PANEL CIRCULAR SAWING MACHINES
BIS IS/IEC 60034-1 : 2004 AMD 1 2015 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
DIN EN ISO/IEC 80079-38 E : 2017 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
CSA Z432 : 2016 SAFEGUARDING OF MACHINERY
DIN EN ISO 13856-3:2013-12 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
14/30245659 DC : 0 BS EN ISO 4254-14 - AGRICULTURAL MACHINERY - SAFETY - PART 14: BALE WRAPPERS
BS EN 13241 : 2003 INDUSTRIAL, COMMERCIAL, GARAGE DOORS AND GATES - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS
DIN EN 15848:2010-06 Water conditioning equipment inside buildings - Adjustable chemical dosing systems - Requirements for performance, safety and testing
CEI EN 60974-1 : 2013 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
PREN 17180 : DRAFT 2017 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING
14/30298206 DC : 0 BS EN 1570-2 - SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
BS EN 15949:2012 Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills
12/30246951 DC : 0 BS ISO 5826 - RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - GENERAL SPECIFICATIONS APPLICABLE TO ALL TRANSFORMERS
DIN EN 16191 E : 2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
04/30124330 DC : 0 EN 15067-1 - PLASTICS AND RUBBER MACHINES - WELDING MACHINES FOR PLASTICS - PART 1: SAFETY REQUIREMENTS FOR FILM CONVERTING MACHINES FOR BAGS AND SACKS
CLC/TS 62046:2008 Safety of machinery - Application of protective equipment to detect the presence of persons
BS EN ISO 19085-5:2017 Woodworking machines. Safety Dimension saws
UNI EN ISO 13856-2 : 2013 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
I.S. EN 12601:2010 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
DIN EN 1870-19:2014-03 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
CEI EN 50374 : 2005 CONDUCTOR CARS
CEI EN 61400-24 : 2011 WIND TURBINES - PART 24: LIGHTNING PROTECTION
11/30249219 DC : 0 BS EN 50569 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
PREN 12013 : DRAFT 2015 PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
BS EN ISO 17916:2016 Safety of thermal cutting machines
NF EN 61310-1 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
PREN ISO 13849-2 : DRAFT 2010 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
DIN EN 1570-2:2014-06 (Draft) SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
UNE-EN 62282-3-1:2011 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
DIN EN ISO 669 E : 2016 RESISTANCE WELDING - RESISTANCE WELDING EQUIPMENT - MECHANICAL AND ELECTRICAL REQUIREMENTS (ISO 669:2016)
10/30214970 DC : 0 BS EN 13616 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
13/30255092 DC : 0 BS EN 1417 - PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
PREN 16147 : DRAFT 2015 HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS
I.S. EN 848-3:2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
03/100500 DC : DRAFT JUNE 2003 IEC 60947-5-5 AMD 1. ED 1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
UNI EN 15162 : 2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
DIN EN 1672-1:2014-12 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
I.S. EN 13616:2004 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
PREN 14678-1 : DRAFT 2010 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
UNI EN 1501-5 : 2011 REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES
PREN 50050-3 : DRAFT 2011 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
UNI EN 1034-17 : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
UNI ISO 15998 : 2008 EARTH-MOVING MACHINERY - MACHINE-CONTROL SYSTEMS (MCS) USING ELECTRONIC COMPONENTS - PERFORMANCE CRITERIA AND TESTS FOR FUNCTIONAL SAFETY
PREN 1175 : DRAFT 2017 SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL/ELECTRONIC REQUIREMENTS
PREN 50050-2 : DRAFT 2011 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
13/30276220 DC : 0 BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
PREN 848-3 : DRAFT 2010 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
15/30280758 DC : 0 BS EN 62745 - SAFETY OF MACHINERY - GENERAL REQUIREMENTS FOR CABLELESS CONTROL SYSTEMS OF MACHINERY
11/30227089 DC : 0 BS EN 1034-3 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
09/30206349 DC : 0 BS EN 14511-4 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 4: REQUIREMENTS
13/30266413 DC : 0 BS ISO 13105-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION
BS EN 12012-1 : 2007 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
DIN EN 1501-5:2012-02 Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
16/30291994 DC : 0 BS EN ISO 19225 - UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
DIN EN 15572:2015-12 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
07/30166811 DC : 0 BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES
PD IEC/TR 62513:2008 Safety of machinery. Guidelines for the use of communication systems in safety-related applications
I.S. EN 1050:1997 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
10/30211872 DC : 0 BS EN 12001 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
BS 7699-9(1993) : 1993 AMD 9103 SPECIFICATION FOR SAFETY IN ELECTROHEAT INSTALLATIONS - PARTICULAR REQUIREMENTS FOR HIGH-FREQUENCY DIELECTRIC HEATING INSTALLATIONS
DIN EN 15571:2015-03 Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
10/30207841 DC : 0 BS EN 500-4 - MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES
13/30263767 DC : 0 BS EN ISO 14120 - SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
09/30180832 DC : DRAFT AUG 2009 BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT
12/30263881 DC : 0 BS EN 1870-3 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
10/30216301 DC : 0 BS EN 61557-14 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C AND 1500 V D.C. EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 14: EQUIPMENT FOR TESTING THE SAFETY OF ELECTRICAL EQUIPMENT FOR MACHINERY
PREN ISO 10218-1 : DRAFT 2009 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS - PART 1: INDUSTRIAL ROBOT
ISO 13851:2002 Safety of machinery Two-hand control devices Functional aspects and design principles
10/30233949 DC : 0 BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS
03/109124 DC : DRAFT JUNE 2003 IEC 61400-1 ED.3.0 - WIND TURBINES - PART 1: DESIGN REQUIREMENTS
I.S. EN ISO 16090-1:2018 MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017)
UNE-EN 81-41:2011 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
BS EN 1501-5:2011 Refuse collection vehicles. General requirements and safety requirements Lifting devices for refuse collection vehicles
EN 115-2:2010 Safety of escalators and moving walks - Part 2: Rules for the improvement of safety of existing escalators and moving walks
BS EN 15906:2011 Winter maintenance equipment. Snow removal machines with rotating tools. Specification and clearing capacity
I.S. EN 61400-1:2005 WIND TURBINES - PART 1: DESIGN REQUIREMENTS
I.S. EN 1870-6:2017 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
08/30190505 DC : 0 BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS ISO 5149-3:2014 Refrigerating systems and heat pumps. Safety and environmental requirements Installation site
14/30297793 DC : 0 BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES
DIN EN 81-41:2016-06 (Draft) SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
08/30181434 DC : DRAFT DEC 2008 BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
07/30172338 DC : DRAFT DEC 2007 BS EN 1114-1 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
UNE-EN 15163:2018 Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws
UTEC 79 160 : 2008 SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
08/30181449 DC : DRAFT JULY 2008 BS EN 1069-2 - WATER SLIDES - PART 2: INSTRUCTIONS
DIN EN ISO 14120 E : 2016 SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS (ISO 14120:2015)
BS ISO 17532:2007 Stationary equipment for agriculture. Data communications network for livestock farming
PD IEC/PAS 80005-3:2014 Utility connections in port Low Voltage Shore Connection (LVSC) Systems. General requirements
BS 5924:1980 Specification for safety requirements for electrical equipment of machines for resistance welding and allied processes
17/30351975 DC : DRAFT AUG 2017 BS EN 17088 - SIDE CURTAINS VENTILATION SYSTEMS - SAFETY
10/30234293 DC : 0 BS EN 12110 - TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
DIN EN ISO 669:2016-07 RESISTANCE WELDING - RESISTANCE WELDING EQUIPMENT - MECHANICAL AND ELECTRICAL REQUIREMENTS (ISO 669:2016)
PD ISO/TR 24119:2015 Safety of machinery. Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts
DIN EN 15162 E : 2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
BS EN 415-10:2014 Safety of packaging machines General Requirements
I.S. EN 81-22:2014 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH
EN 1034-1:2000+A1:2010 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
DIN EN ISO 14119:2014-03 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013)
BS EN 16282-2:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation hoods; design and safety requirements
I.S. HD 384.4.46:2002 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 46: ISOLATION AND SWITCHING
UNI EN 1501-3 : 2008 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
12/30271401 DC : 0 BS EN 14511-4 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - PART 4: REQUIREMENTS
11/30248845 DC : 0 BS EN 50050-2:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
PREN 203-1 : DRAFT 2012 GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES
10/30238943 DC : 0 BS EN 61000-6-7 ED.1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL ENVIRONMENTS
UNI EN 1829-1 : 2010 HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
11/30247562 DC : 0 BS EN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
BS ISO 17842-2:2015 Safety of amusement rides and amusement devices Operation and use
UNE-EN 1570-2:2017 Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s
09/30201664 DC : 0 BS EN ISO 12100 - SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN, RISK ASSESSMENT AND RISK REDUCTION
15/30302205 DC : DRAFT FEB 2015 BS EN ISO 19296 - MINING AND EARTHMOVING MACHINERY - MOBILE MACHINES WORKING UNDERGROUND - MACHINE SAFETY
BS EN ISO 16093:2017 Machine tools. Safety. Sawing machines for cold metal
BS EN 61784-3-6:2010 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 6
14/30293310 DC : 0 BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
12/30255089 DC : 0 BS EN 16474 - PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
05/19981975 DC : DRAFT JUN 2005 BS EN 1034-2 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
DIN EN 13035-2:2008-10 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
12/30268301 DC : 0 BS EN 16486 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
00/541672 DC : DRAFT NOV 2000 BS EN 14043 - AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS
DIN ISO 20966:2008-04 AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING
I.S. EN 82079-1:2012 PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS (IEC 82079-1:2012 (EQV))
UNE-EN ISO 13482:2014 Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014)
DIN EN 15571 E : 2015 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
08/30175652 DC : DRAFT SEP 2008 BS EN 1248 AMD1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
DIN EN 1034-17 E : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
DIN EN 1870-18:2013-08 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
BS ISO 22967:2010 Forced draught gas burners
13/30291774 DC : 0 BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
14/30304361 DC : 0 BS EN ISO 11111-1 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS
A-A-59200 Base Document:1998 GRINDING MACHINES, SURFACE, ROTARY TABLE, VERTICAL SPINDLE
PREN 15180 : DRAFT 2011 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
18/30361176 DC BS EN ISO 19085-15. Woodworking machines. Safety Part 15. Presses
09/30178331 DC : DRAFT FEB 2009 BS EN 1870-7:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
BS EN 16327:2014 Fire-fighting. Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
DIN EN ISO 16093 E : 2017 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
04/30105027 DC : DRAFT JUNE 2004 ISO 21789 - GAS TURBINES - SAFETY
04/30122366 DC : DRAFT SEP 2004 EN ISO 10218 - ROBOTS FOR INDUSTRIAL ENVIRONMENTS - SAFETY REQUIREMENTS
09/30181661 DC : 0 BS EN 13035-3:2003/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
08/30187323 DC : DRAFT JULY 2008 BS ISO 21873-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS
PREN 1034-3 : DRAFT 2011 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
PREN 676 : DRAFT 2012 FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
09/30179773 DC : 0 BS EN 12387:2005/A1 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
BS EN 61310-1:2008 Safety of machinery. Indication, marking and actuation Requirements for visual, acoustic and tactile signals
05/30137922 DC : DRAFT AUG 2005 ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
08/30176210 DC : DRAFT MAY 2008 BS EN 61784-3 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELD BUSES
04/30126179 DC : DRAFT DEC 2004 EN 15095 - POWER-OPERATED MOBILE RACKING AND SHELVING, CARROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
I.S. EN 13035-2:2008 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
DIN EN 15268:2008-11 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP
NF EN 15848 : 2010 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
DIN EN 1034-17:2012-11 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines
BS EN ISO 13482:2014 Robots and robotic devices. Safety requirements for personal care robots
DIN EN 16500:2014-10 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
DIN EN 1034-27 E : 2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
12/30260299 DC : 0 BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
09/30178349 DC : 0 BS EN 1870-15:2004/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
08/30195564 DC : 0 BS EN 60974-1 - ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
05/19981951 DC : 0 BS EN 1034-13 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: AUXILIARY EQUIPMENT FOR DE-WIRING BALES AND UNITS
00/707575 DC : DRAFT APR 2000 ISO/DIS 12100-1 - SAFETY OF MACHINERY - BASIC CONCEPTS AND GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY AND METHODOLOGY
BS EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device
05/30133451 DC : 0 EN 115 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND MOVING WALKS
BS EN 61800-5-2:2017 Adjustable speed electrical power drive systems Safety requirements. Functional
BS EN 15955-2:2013 Railway applications. Track. Demountable machines and associated equipment General safety requirements
11/30251974 DC : 0 BS EN 15180 - FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
05/30076956 DC : 0 BS EN 12445 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - TEST METHODS
09/30179779 DC : 0 BS EN 13457 AMD1 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS
13/30252065 DC : 0 BS EN ISO 669 - RESISTANCE WELDING - RESISTANCE WELDING EQUIPMENT - MECHANICAL AND ELECTRICAL REQUIREMENTS
BS EN 1034-27:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll handling systems
CSA Z434 : 2014 INDUSTRIAL ROBOTS AND ROBOT SYSTEMS
BS EN 14886:2008 Plastics and rubber machines. Bandknife cutting machines for block foams. Safety requirements
BS EN 60073:2002 Basic and safety principles for man-machine interface, marking and identification. Coding principles for indicators and actuators
05/30133339 DC : DRAFT MAY 2005 EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
I.S. EN ISO 19225:2017 UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS (ISO 19225:2017)
NF EN 60947-5-8 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-8: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - THREE-POSITION ENABLING SWITCHES
01/712575 DC : DRAFT SEP 2001 ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEM - PART 2: VALIDATION
BS EN 15163:2017 Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws
NF EN 50570 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
NF ISO 4413 : 1999 HYDRAULIC FLUID POWER - GENERAL RULES RELATING TO SYSTEMS
NF EN 81-31 : 2011 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
BS EN 13035-6 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
04/30086349 DC : DRAFT APR 2004 EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
09/30178353 DC : 0 BS EN 1870-16:2005/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
09/30178322 DC : DRAFT JAN 2009 BS EN 1870-4 AMD1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
UNI EN 1870-18 : 2014 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
UNE-EN 61000-6-7:2015 Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations
UNE-EN 1807-2:2013 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines
BS ISO 20966:2007 Automatic milking installations. Requirements and testing
API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ISO 17842-3:2015 Safety of amusement rides and amusement devices Part 3: Requirements for inspection during design, manufacture, operation and use
DIN EN 13035-6:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out (includes Amendment A1:2009)
EN 61784-3-17:2017 Industrial communication networks - Profiles - Part 3-17: Functional safety fieldbuses - Additional specifications for CPF 17
DIN EN 16500 E : 2014 MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
PREN 378-2 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
UNI ISO 15817 : 2008 EARTH-MOVING MACHINERY - SAFETY REQUIREMENTS FOR REMOTE OPERATOR CONTROL
DIN EN 15061 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
DIN EN 15093 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS
DIN EN ISO 8230-1:2009-05 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
BS EN 16774:2016 Safety of machinery. Safety requirements for steel converter and associated equipment
DIN EN 15848 E : 2010 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
DIN EN 115-2:2010-12 Safety of escalators and moving walks - Part 2: Rules for the improvement of safety of existing escalators and moving walks
DIN EN 15166 E : 2010 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
CEI EN 61800-5-2 : 2009 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
UNI EN 15879-1 : 2011 TESTING AND RATING OF DIRECT EXCHANGE GROUND COUPLED HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND/OR COOLING - PART 1: DIRECT EXCHANGE-TO-WATER HEAT PUMPS
CSA C22.2 No. 60950.23 : 2007 : R2016 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
CSA C22.2 No. 60950.23 : 2007 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
I.S. EN 1807-1:2013 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
I.S. EN ISO 16924:2018 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES (ISO 16924:2016)
UNE-EN 1672-1:2015 Food processing machinery - Basic concepts - Part 1: Safety requirements
I.S. EN 12693:2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
I.S. EN 61784-3-18:2011 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18
BS EN ISO 19085-6:2017 Woodworking machines. Safety Single spindle vertical moulding machines (\'toupies\')
I.S. EN 61784-3-1:2010 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-1: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 1
I.S. EN 15848:2010 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
I.S. EN 1034-27:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
I.S. EN ISO 28881:2013 MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES (ISO 28881:2013)
I.S. EN ISO 8230-3:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
S.R. CLC/TS 62046:2008 SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
CSA C61400-2 : 2008 : R2018 WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
I.S. EN 14511-4:2018 AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS FOR SPACE HEATING AND COOLING AND PROCESS CHILLERS, WITH ELECTRICALLY DRIVEN COMPRESSORS - PART 4: REQUIREMENTS
CEI EN 61784-3-18 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18
PREN 15467 : DRAFT 2012 FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 13856-3:2013 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
PREN 13378 : DRAFT 2016 PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 61400-24:2010 WIND TURBINES - PART 24: LIGHTNING PROTECTION
ISO 19085-2:2017 Woodworking machines Safety Part 2: Horizontal beam panel circular sawing machines
I.S. EN 61784-3-12:2010 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12
I.S. EN 60073:2002 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATION DEVICES AND ACTUATORS
ISO 12648:2006 Graphic technology Safety requirements for printing press systems
I.S. EN 62282-3-100:2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
I.S. EN 16191:2014 TUNNELLING MACHINERY - SAFETY REQUIREMENTS
I.S. EN ISO 13482:2014 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
I.S. EN ISO/IEC 80079-38:2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
CEN ISO/TR 22100-1:2017 Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015)
I.S. EN 60940:2015 GUIDANCE INFORMATION ON THE APPLICATION OF CAPACITORS, RESISTORS, INDUCTORS AND COMPLETE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION
I.S. HD 60364-5-534:2008 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - ISOLATION, SWITCHING AND CONTROL - CLAUSE 534: DEVICES FOR PROTECTION AGAINST OVERVOLTAGES
I.S. EN 15094:2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
I.S. EN ISO 8528-13:2016 RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO/DIS 8528-13:2014)
I.S. EN 60519-1:2015 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
I.S. EN ISO 8230-1:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
I.S. EN 60947-5-8:2006 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-8: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - THREE-POSITION ENABLING SWITCHES
I.S. EN ISO 16089:2015 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014)
I.S. EN 15879-1:2011 TESTING AND RATING OF DIRECT EXCHANGE GROUND COUPLED HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND/OR COOLING - PART 1: DIRECT EXCHANGE-TO-WATER HEAT PUMPS
EN 378-2:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
ISO/TS 19837:2018 Safety of machinery Trapped key interlocking devices Principles for design and selection
UNE-EN 378-1:2017 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
PREN 17003 : DRAFT 2016 ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS
PREN 12547 : DRAFT 2011 CENTRIFUGES - COMMON SAFETY REQUIREMENTS
CEI EN 60703 : 2010 TEST METHODS FOR ELECTROHEATING INSTALLATIONS WITH ELECTRON GUNS
I.S. EN 15165:2014 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
14/30301874 DC : 0 BS EN 16770 - SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS
UNE-EN 14511-4:2014 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Operating requirements, marking and instructions
BWB TL 3405-0005 : 1ED 2004
16/30335146 DC : 0 BS EN 16985 - SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 12013:2018 Plastics and rubber machines. Internal mixers. Safety requirements
PD CEN ISO/TR 22100-1:2017 Safety of machinery. Relationship with ISO 12100 How ISO 12100 relates to type-B and type-C standards
EN 15163:2017 Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws
UNE-EN ISO 12100:2012 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
GOST R IEC 60974-1 : 2012 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
OVE/ONORM EN 60947-5-8 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-8: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - THREE-POSITION ENABLING SWITCHES
PREN 12042 : DRAFT 2011 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 50050-1:2014 Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials
IEC 60364-7-740:2000 Electrical installations of buildings - Part 7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses
ISO 17842-1:2015 Safety of amusement rides and amusement devices — Part 1: Design and manufacture
DIN EN 12629-2:2011-01 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines (includes Amendment A1:2010)
DIN EN 12753:2011-02 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010)
EN ISO 19085-6:2017 Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupies") (ISO 19085-6:2017)
ISO/TR 14799-2:2015 Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments
ISO/TR 22100-1:2015 Safety of machinery Relationship with ISO 12100 Part 1: How ISO 12100 relates to type-B and type-C standards
PREN 17064 : DRAFT 2016 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE
EN 62026-2:2013 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)
ISO 14990-3:2016 Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 3: Particular requirements for self-powered machines
DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
ISO 15519-1:2010 Specification for diagrams for process industry Part 1: General rules
EN 12012-1:2007+A1:2008 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators
ISO 7076-5:2014 Fire protection Foam fire extinguishing systems Part 5: Fixed compressed air foam equipment
I.S. EN 81-31:2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS
IEC TS 60204-34:2016 Safety of machinery - Electrical equipment of machines - Part 34: Requirements for machine tools
I.S. EN 62135-1:2015 RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
I.S. EN 1501-3:2008 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
I.S. HD 60364-7-740:2006 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
I.S. EN 61784-3-2:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-2: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 2
ISO 16368:2010 Mobile elevating work platforms Design, calculations, safety requirements and test methods
BS EN 12301 : 2000 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
I.S. EN 61310-1:2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
I.S. EN 13035-5:2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 5: MACHINES AND INSTALLATIONS FOR STACKING AND DE-STACKING
ISO 13577-4:2014 Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems
I.S. EN 13035-7:2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
I.S. EN 61784-3-13:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-13: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 13
I.S. EN 60974-9:2010 ARC WELDING EQUIPMENT - PART 9: INSTALLATION AND USE
IEC 62845:2015 Railway applications - Radio remote control system of traction vehicles for shunting application
I.S. EN 15166:2008 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
IEC 61784-3-8:2016 Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8
IEC TR 62513:2008 Safety of machinery - Guidelines for the use of communication systems in safety-related applications
I.S. EN 60439-1:2000 LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
UNE-EN 280:2014 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
IEC 61326-3-1:2017 RLV Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
IEC 61784-3-2:2016 Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2
EN 13035-3:2003 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
UNE-EN 1915-1:2013 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
DIN EN 13012:2012-09 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
DIN EN 809:2012-10 Pumps and pump units for liquids - Common safety requirements
DIN EN 710:2010-10 Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment (includes Amendment A1:2010)
EN 620:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
DIN EN 940:2012-05 SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
IEC 61800-5-2:2016 RLV Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
DIN EN 13977:2011-04 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
DIN EN 13732:2013-10 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene
DIN EN ISO 5826:2014-07 RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - GENERAL SPECIFICATIONS APPLICABLE TO ALL TRANSFORMERS (ISO 5826:2014)
DIN EN 14180:2014-09 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
DIN EN 280:2016-04 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests (includes Amendment A1:2015)
DIN EN 861:2012-09 SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
DIN EN 13814:2005-06 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
DIN EN 14803 E : 2006 IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
DIN EN 201:2010-02 PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
DIN EN 14673 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
DIN EN 972:2011-07 Tannery machines - Reciprocating roller machines - Safety requirements (includes Amendment A1:2010)
DIN EN ISO 13850:2016-05 SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015)
DIN EN 859:2012-09 SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
DIN EN 13886:2011-02 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 617:2011-06 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers (includes Amendment A1:2010)
DIN EN 1870-1:2009-08 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
DIN EN 14658 E : 2010 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
DIN EN 1114-1:2012-01 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
DIN EN 12101-10:2006-01 SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES
DIN EN 14044:2014-04 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 1114-3:2015-12 (Draft) PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
DIN EN 12629-3:2011-02 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines (includes Amendment A1:2010)
DIN EN 860:2012-09 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
DIN EN 14043:2014-04 HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 14656 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
DIN EN 12629-7:2011-03 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products (includes Amendment A1:2010)
BS EN 12629-2 : 2002 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 2: BLOCK MAKING MACHINES
UNE-EN 13243:2015 Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
BS EN ISO 13850:2015 Safety of machinery. Emergency stop function. Principles for design
DIN EN 12301:2010-02 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
BS EN 415-5 : 2006 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
BS EN 12547:2014 Centrifuges. Common safety requirements
UNE-EN 14655:2006 Food processing machinery - Baguette slicers - Safety and hygiene requirements
BS EN 12101-10:2005 Smoke and heat control systems Power supplies
14/30297343 DC : 0 BS EN ISO 8528-13 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY
BS EN 13885 : 2005 FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ISO 8230-1:2008 Safety requirements for dry-cleaning machines Part 1: Common safety requirements
IEC 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
UNE-EN ISO 8528-13:2017 Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15)
ISO 15616-1:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting Part 1: General principles, acceptance conditions
BS EN ISO 11161 : 2007 SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS
BS EN 1028-1 : 2002 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
BS EN 1870-12:2013 Safety of woodworking machines. Circular sawing machines Pendulum cross-cut sawing machines
BS EN ISO 10821 : 2005 INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
13/30277685 DC : 0 BS EN 60519-1 - SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
BS EN 14222:2003 Stainless steel shell boilers
BS EN 453:2014 Food processing machinery. Dough mixers. Safety and hygiene requirements
14/30302919 DC : 0 PD CEN/TR 81-12 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - BASICS AND INTERPRETATIONS - PART 12: USE OF EN 81-20 AND EN 81-50 IN SPECIFIC MARKETS
IEC 60950-23:2005 Information technology equipment - Safety - Part 23: Large data storage equipment
13/30276640 DC : 0 BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY
I.S. EN ISO 11553-1:2008 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS
BS EN 13675 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT
ISO 10821:2005 Industrial sewing machines Safety requirements for sewing machines, units and systems
EN ISO 11553-1:2008 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
BS EN 13525 : 2005 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
BS EN 13389 : 2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
ISO 22827-1:2005 Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly
BS ISO 17842-1:2015 Safety of amusement rides and amusement devices Design and manufacture
ISO 8230-3:2008 Safety requirements for dry-cleaning machines Part 3: Machines using combustible solvents
BS EN 13871:2014 Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements
BS EN 13035-4 : 2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
BS EN 13621 : 2004 FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 12601:2011 Reciprocating internal combustion engine driven generating sets - Safety
BS EN 12267 : 2003 FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12268:2014 Food processing machinery. Band saw machines. Safety and hygiene requirements
BS EN 869 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS
15/30297990 DC : 0 BS EN 62840-2 ED 1.0 - ELECTRIC VEHICLE BATTERY SWAP SYSTEM - PART 2: SAFETY REQUIREMENTS
BS EN 12417 : 2001 MACHINE TOOLS - SAFETY - MACHINING CENTRES
IEC 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
BS EN 12840:2001 Safety of machine tools. Manually controlled turning machines with or without automatic control
ISO 15012-4:2016 Health and safety in welding and allied processes Equipment for capture and separation of welding fume Part 4: General requirements
ISO 8230-2:2008 Safety requirements for dry-cleaning machines Part 2: Machines using perchloroethylene
BS EN 1870-1 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
ISO 14744-1:2008 Welding Acceptance inspection of electron beam welding machines Part 1: Principles and acceptance conditions
ISO 8230:1997 Safety requirements for dry-cleaning machines using perchloroethylene
BS EN 931 : 1998 FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
UNE-EN ISO 13850:2016 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
BS EN 1756-2 : 2004 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS
BS EN 60204-31:2013 Safety of machinery. Electrical equipment of machines Particular safety and EMC requirements for sewing machines, units and systems
BS EN 619 : 2002
BS EN 62282-4-101:2014 Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
BS EN 13367 : 2005 CERAMIC MACHINES - SAFETY - TRANSFER PLATFORMS AND CARS
BS EN 13736 : 2003 SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
BS EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing
15/30324856 DC : 0 BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION
BS EN 1218-4 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
BS EN 13617-1:2012 Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
BS EN 12336 : 2005 TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
BS EN 12621 : 2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
BS EN 1034-4 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
BS EN 500-1 : 2006 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 1: COMMON REQUIREMENTS
BS EN 13112 : 2002 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
BS EN 12312-20 : 2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS
BS EN 13208 : 2003 FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 13288:2006 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
BS EN 13289 : 2001 PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 14710-1 : 2005 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
EN 13525:2005+A2:2009 Forestry machinery - Wood chippers - Safety
BS EN 982 : 1996 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
UNE-EN 741:2000 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
UNE-EN 1175-1:1998 SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS.
BS EN 12779:2015 Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements
BS EN 15339-2:2007 Thermal spraying. Safety requirements for thermal spraying equipment Gas control units
BS EN ISO 10472-2:2008 Safety requirements for industrial laundry machinery Washing machines and washer-extractors
BS EN 1034-6 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
BS EN 1674:2015 Food processing machinery. Dough sheeters. Safety and hygiene requirements
BS EN 12012-3 : 2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
UNE-EN 12649:2009 Concrete compactors and smoothing machines - Safety
BS EN 13985 : 2003 MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
ISO 13482:2014 Robots and robotic devices Safety requirements for personal care robots
ISO 11553-1:2005 Safety of machinery Laser processing machines Part 1: General safety requirements
IEC 60825-4:2006+AMD1:2008+AMD2:2011 CSV Safety of laser products - Part 4: Laser guards
BS EN 201:2009 Plastics and rubber machines. Injection moulding machines. Safety requirements
16/30350629 DC : 0 BS EN 62485-6 ED 1.0 - SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 6: LITHIUM-ION BATTERIES FOR TRACTION APPLICATIONS
BS EN ISO 22827-1:2005 Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre delivery Laser assembly
UNE-EN 1539:2010 Dryers and ovens, in which flammable substances are released - Safety requirements
BS EN 13042-1 : 2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
IEC 61310-3:2007 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
NFPA 70E : 2018 ELECTRICAL SAFETY IN THE WORKPLACE
ISO 10472-5:1997 Safety requirements for industrial laundry machinery Part 5: Flatwork ironers, feeders and folders
BS EN 13977:2011 Railway applications. Track. Safety requirements for portable machines and trolleys for construction and maintenance
UNE-EN 1248:2001 Foundry Machinery - Safety requirements for abrasive blasting equipment.
UNE-EN 12001:2013 Conveying, spraying and placing machines for concrete and mortar - Safety requirements
UNE-EN 1870-15:2013 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
BS EN ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets Safety
BS EN 930 : 1997 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
IEC 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
UNE-EN 12622:2011 Safety of machine tools - Hydraulic press brakes
BS ISO 19372:2015 Microturbines applications. Safety
BS EN 1987-3:1998 Electrically propelled road vehicles. Specific requirements for safety Protection of users against electrical hazards
UNE-EN 13114:2002 Tannery machines- Rotating process vessels - Safety requirements.
BS EN 1807 : 1999 SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
BS EN 12626:1997 Safety of machinery. Laser processing machines. Safety requirements
BS EN 1034-2 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
11/30211394 DC : DRAFT MAR 2011 BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
UNE-EN 500-4:2011 Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines
UNE-EN 415-6:2014 Safety of packaging machines - Part 6: Pallet wrapping machines
BS EN 12978 : 2003 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
BS EN 13288 : 2005 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ISO 10218-1:2011 Robots and robotic devices Safety requirements for industrial robots Part 1: Robots
ISO 10472-6:1997 Safety requirements for industrial laundry machinery Part 6: Ironing and fusing presses
ISO 10218-2:2011 Robots and robotic devices Safety requirements for industrial robots Part 2: Robot systems and integration
BS EN 415-7 : 2006 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
ISO 13856-3:2013 Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
UNE-EN 454:2015 Food processing machinery - Planetary mixers - Safety and hygiene requirements
BS EN 1870-3:2014 Safety of woodworking machines. Circular sawing machines Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
BS EN 12041:2014 Food processing machinery. Moulders. Safety and hygiene requirements
BS EN 972 : 1998 TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
BS EN 746-4:2000 Industrial thermoprocessing equipment Particular safety requirements for hot dip galvanizing thermoprocessing equipment
ISO 23125:2015 Machine tools Safety Turning machines
UNE-EN 12750:2013 Safety of woodworking machines - Four sided moulding machines
UNE-EN 62282-5-1:2013 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
UNE-EN 13012:2012 Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
BS EN 1218-5 : 2004 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
IEC 61310-2:2007 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
ISO 14119:2013 Safety of machinery Interlocking devices associated with guards Principles for design and selection
BS EN 12750:2013 Safety of woodworking machines. Four sided moulding machines
BS EN 1248 : 2001 FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR ABRASIVE BLASTING EQUIPMENT
BS EN 285:2015 Sterilization. Steam sterilizers. Large sterilizers
BS EN 1870-11:2013 Safety of woodworking machines. Circular sawing machines Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
UNE-EN 1846-2:2011 Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance
BS EN 693 : 2001 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
IEC 61400-1:2005+AMD1:2010 CSV Wind turbines - Part 1: Design requirements
BS EN 983 : 1996 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
UNE-EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
ISO 13856-1:2013 Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
IEC 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
UNE-ISO 16110-1:2015 Hydrogen generators using fuel processing technologies -- Part 1: Safety
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
IEC 61082-1:2014 RLV Preparation of documents used in electrotechnology - Part 1: Rules
ISO 11252:2013 Lasers and laser-related equipment — Laser device — Minimum requirements for documentation
BS EN 1501-1 : 2011 REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
BS EN 81-20:2014 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Passenger and goods passenger lifts
IEC 61400-3:2009 Wind turbines - Part 3: Design requirements for offshore wind turbines
BS EN 1870-4:2012 Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
BS EN 422:2009 Plastics and rubber machines. Blow moulding machines. Safety requirements
BS EN 203-1:2014 Gas heated catering equipment General safety rules
BS EN 12331:2015 Food processing machinery. Mincing machines. Safety and hygiene requirements
ISO 11111-5:2005 Textile machinery Safety requirements Part 5: Preparatory machinery to weaving and knitting
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
BS EN 61082-1:2015 Preparation of documents used in electrotechnology Rules
UNI EN 12301 : 2008 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
DD CLC/TS 62081:2002 Arc welding equipment. Installation and use
ISO 11111-1:2016 Textile machinery Safety requirements Part 1: Common requirements
ISO 18217:2015 Safety of woodworking machines Edge-banding machines fed by chain(s)
IEC 62079:2001 Preparation of instructions - Structuring, content and presentation
BS EN 14070 : 2003 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
BS EN 13035-9 : 2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 9: WASHING INSTALLATIONS
UNE-EN 860:2007 Safety of woodworking machines - One side thickness planing machines
UNE-EN 619:2003 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads.
BS EN 14010 : 2003
IEC 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
BS EN 1760-2 : 2001 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
ISO 16093:2017 Machine tools — Safety — Sawing machines for cold metal
ISO 13856-2:2013 Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
10/30173705 DC : DRAFT SEP 2010 BS EN 62282-5-1 - FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
11/30232911 DC : 0 BS ISO 13577-1 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 12044 : 2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
UNE-EN 617:2002 Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers.
UNE-EN 50571:2014 Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
ISO 11553:1996 Safety of machinery — Laser processing machines — Safety requirements
BS EN ISO 11553-2:2008 Safety of machinery. Laser processing machines Safety requirements for hand-held laser processing devices
BS EN 1808:2015 Safety requirements for suspended access equipment. Design calculations, stability criteria, construction. Examinations and tests
BS EN 1870-13 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
BS EN 14803:2006 Identification and/or determination of the quantity of waste
BS EN 378-2:2016 Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation
BS EN 15027 : 2007 TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
UNE-EN 13112:2002 Tannery machines - Splitting and bandknife shearing machines - Safety requirements.
BS EN 12957 : 2001 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
BS EN 14180:2014 Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing
BS EN 676 : 2003 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
BS EN 1710 : 2005 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
UNE-EN 12158-1:2001 Builders hoists for goods. Part 1: Hoists with accessible platforms.
BS EN ISO 11252:2013 Lasers and laser-related equipment. Laser device. Minimum requirements for documentation
UNE-EN 12409:2009 Plastics and rubber machines - Thermoforming machines - Safety requirements
IEC 61800-1:1997 Adjustable speed electrical power drive systems - Part 1: General requirments - Rating specifications for low voltage adjustables speed d.c. power drive systems
IEC 60940:2015 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression
BS EN 13114 : 2002 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
UNE-EN 1870-9:2013 Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
PD ISO/TR 14799-2:2005 Comparison of worldwide escalator and moving walk safety standards Abbreviated comparison and comments
UNE-EN 13591:2006 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements
IEC 61439-1:2020 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
BS EN 1034-7 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
BS EN 13042-5 : 2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 5: PRESSES
UNE-EN 1756-2:2005 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers
I.S. EN 13525:2005 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
BS EN 13113 : 2002 TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
BS EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment Requirements for application design and installation
BS EN 378-3:2016 Refrigerating systems and heat pumps. Safety and environmental requirements Installation site and personal protection
BS EN 1114-3 : 2001 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
UNE-EN 1247:2005 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines
UNE-EN 1870-16:2013 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting
UNE-EN 1175-3:1998 SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 3: SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS.
BS EN 13870:2015 Food processing machinery. Portion cutting machines. Safety and hygiene requirements
BS EN 60204-33:2011 Safety of machinery. Electrical equipment of machines Requirements for semiconductor fabrication equipment
BS EN 1846-2 : 2009 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE
UNE-EN 13525:2005 Forestry machinery - Wood chippers - Safety
BS EN 536:2015 Road construction machines. Mixing plants for road construction materials. Safety requirements
BS ISO 14990-1:2016 Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements
UNE-EN 940:2010 Safety of woodworking machines - Combined woodworking machines
BS EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies
UNE-EN 13389:2006 Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements.
UNE-EN 13871:2015 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements
BS EN ISO 13849-1:2015 Safety of machinery. Safety-related parts of control systems General principles for design
09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
IEC 61800-7-202:2015 Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification
ISO 11161:2007 Safety of machinery — Integrated manufacturing systems — Basic requirements
UNE-EN 859:2008 Safety of woodworking machines - Hand fed surface planing machines
16/30301661 DC : 0 BS EN 61439-1 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
BS EN 13591 : 2005 FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS
EN 82079-1:2012 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
UNE-EN 620:2002 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
BS EN 1760-1 : 1998 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
UNE-EN 60204-31:2013 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
UNE-EN ISO 13849-1:2016 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
IEC 62485-3:2014 Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries
12/30260546 DC : 0 BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
BS EN ISO 10472-6:2008 Safety requirements for industrial laundry machinery Ironing and fusing presses
UNE-EN 13870:2016 Food processing machinery - Portion cutting machines - Safety and hygiene requirements
UNE-EN 50570:2014 Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers
BS EN 860 : 2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications
BS ISO 13577-2:2014 Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems
UNE-EN ISO 11111-1:2016 Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016)
BS EN 12854 : 2003 FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 62282-2:2012 Fuel cell technologies Fuel cell modules
UNE-EN 13113:2002 Tannery machines - Roller coating machines - Safety requirements.
UNE-EN 62485-3:2015 Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries
DIN EN 676:2008-11 Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008)
UNE-EN 1114-1:2012 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
UNE-EN 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
DIN EN 15095:2009-06 POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
DIN EN 13042-5:2009-12 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses (includes Amendment A1:2009)
UNE-EN 1870-8:2013 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
ISO 5826:2014 Resistance welding equipment Transformers General specifications applicable to all transformers
DIN 56950:2005-04 ENTERTAINMENT TECHNOLOGY - MACHINERY INSTALLATIONS - SAFETY REQUIREMENTS AND TESTING
EN 62485-3:2014 Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries
EN 61310-2:2008 Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material - Safety requirements
EN 1417:2014 Plastics and rubber machines - Two-roll mills - Safety requirements
EN 741:2000+A1:2010 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
EN 15879-1:2011 Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling - Part 1: Direct exchange-to-water heat pumps
EN 691-1:2012 Safety of woodworking machines - Part 1: Common requirements
EN 13241-1:2003+A1:2011 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
EN 16774:2016 Safety of machinery - Safety requirements for steel converter and associated equipment
EN 13788 : 2001 MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
EN 13814:2004 Fairground and amusement park machinery and structures - Safety
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN 1570-1:2011+A1:2014 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
EN 609-2:1999+A1:2009 Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters
EN ISO 17916:2016 Safety of thermal cutting machines (ISO 17916:2016)
EN 1808:2015 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
EN 13885:2005+A1:2010 Food processing machinery - Clipping machines - Safety and hygiene requirements
EN 13898:2003+A1:2009/AC:2010 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
EN 536:2015 Road construction machines - Mixing plants for road construction materials - Safety requirements
EN ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)
EN 415-10:2014 Safety of packaging machines - Part 10: General Requirements
EN 201:2009 Plastics and rubber machines - Injection moulding machines - Safety requirements
EN ISO 10472-5:2008 Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)
EN 692:2005+A1:2009 Machine tools - Mechanical presses - Safety
EN 1710:2005+A1:2008/AC:2010 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
EN 15774:2010 Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements
EN 14812:2005+A1:2007 Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing
EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
EN 15955-2:2013 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
EN 1493:2010 Vehicle lifts
EN 81-31:2010 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
EN 15954-2:2013 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
EN 15067:2007 Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
EN 13675:2004+A1:2010 Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment
EN ISO 11111-1:2016 Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016)
EN 14466:2005+A1:2008 Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests
EN ISO 10218-1:2011 Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)
EN 13861:2011 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
EN 14656:2006+A1:2010 Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals
UNI EN 13012 : 2012 PETROL FILLING STATIONS - CONSTRUCTION AND PERFORMANCE OF AUTOMATIC NOZZLES FOR USE ON FUEL DISPENSERS
EN 415-7:2006+A1:2008 Safety of packaging machines - Part 7: Group and secondary packaging machines
EN ISO 15616-1:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003)
EN 422:2009 Plastics and rubber machines - Blow moulding machines - Safety requirements
EN 15027:2007+A1:2009 Transportable wall saw and wire saw equipment for job site - Safety
EN ISO 5826:2014 Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014)
EN 415-8:2008 Safety of packaging machines - Part 8: Strapping machines
EN 1915-1:2013 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 14043:2014 High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods
EN ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
EN 12984:2005+A1:2010 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements
EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)
EN ISO 10472-4:2008 Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)
EN 15094:2008 Safety of Machinery - Safety requirements for cold flat rolling mills
EN ISO 16923:2018 Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016)
EN ISO 669:2016 Resistance welding - Resistance welding equipment - Mechanical and electrical requirements (ISO 669:2016)
EN 15164:2008 Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines
EN 609-1:2017 Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters
EN 1672-1:2014 Food processing machinery - Basic concepts - Part 1: Safety requirements
EN 15061:2007+A1:2008 Safety of machinery - Safety requirements for strip processing line machinery and equipment
EN 13977:2011 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
EN 13035-5:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking
EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
EN 1987-3 : 1998 ELECTRICALLY PROPELLED ROAD VEHICLES - SPECIFIC REQUIREMENTS FOR SAFETY - PART 3: PROTECTION OF USERS AGAINST ELECTRICAL HAZARDS
EN 15268:2008 Petrol filling stations - Safety requirements for the construction of submersible pump assemblies
EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
EN ISO 4254-14:2016 Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016)
EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 1870-16:2012 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting
EN 13591:2005+A1:2009 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements
EN 15949:2012 Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
EN 14957:2006+A1:2010 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements
EN 12159:2012 Builders hoists for persons and materials with vertically guided cages
EN 453:2014 Food processing machinery - Dough mixers - Safety and hygiene requirements
EN 1539:2015 Dryers and ovens, in which flammable substances are released - Safety requirements
EN ISO 11111-5:2005/A2:2016 TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 5: PREPARATORY MACHINERY TO WEAVING AND KNITTING (ISO 11111-5:2005/AMD 2:2016)
EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
EN 1870-13:2007+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
EN 12581:2005+A1:2010 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements
EN ISO 10821:2005/A1:2009 Industrial sewing machines - Safety requirements for sewing machines, units and systems - Amendment 1 (ISO 10821:2005/Amd 1:2009, Corrected version 2009-08-01)
EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements
EN 972:1998+A1:2010/AC:2011 TANNERY MACHINES - RECIPROCATING ROLLER MACHINES - SAFETY REQUIREMENTS
EN 13842:2004 Oil fired forced convection air heaters - Stationary and transportable for space heating
EN 1760-2:2001+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
EN ISO 10472-6:2008 Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)
EN 500-1:2006+A1:2009 Mobile road construction machinery - Safety - Part 1: Common requirements
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN 1756-2:2004+A1:2009 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers
EN 13954:2005+A1:2010 Food processing machinery - Bread slicers - Safety and hygiene requirements
EN 13621:2004+A1:2010 Food processing machinery - Salad dryers - Safety and hygiene requirements
EN 15093:2008 Safety of Machinery - Safety requirements for hot flat rolling mills
EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
EN 1612-1:1997+A1:2008 Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units
EN 15166:2008 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
EN 1760-3:2004+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
EN 930:1997+A2:2009 Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements
EN 13218:2002+A1:2008/AC:2010 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN ISO 13482:2014 Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014)
EN ISO 10472-2:2008 Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)
EN 1870-2:1999/AC:2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
EN 16500:2014 Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
EN 1807:1999+A1:2009 Safety of woodworking machines - Band sawing machines
EN 1870-6:2017 Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood
EN 454:2014 Food processing machinery - Planetary mixers - Safety and hygiene requirements
EN 14681:2006+A1:2010 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces
EN 1889-1:2011 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
EN ISO 11553-2:2008 Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)
EN 869:2006+A1:2009 Safety of machinery - Safety requirements for pressure metal diecasting units
EN 15162:2008 Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN 1870-3:2014 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
EN 1870-18:2013 Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws
EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
EN 1870-14:2007+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
EN 1398:2009 Dock levellers - Safety requirements
EN 1807-2:2013 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines
EN 14710-1:2005+A2:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements
EN 1422:2014 Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods
EN ISO 8230 : 1997 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
EN 1374:2000+A1:2010 Agricultural machinery - Silos stationary unloaders for round silos - Safety
EN 1845:2007 Footwear manufacturing machines - Footwear moulding machines - Safety requirements
EN 1870-1:2007+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
EN 1870-7:2012 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
EN ISO 22827-1:2005 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005)
EN 1870-5 : 2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
EN 13871:2014 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements
EN 15165:2014 Food processing machinery - Forming machines - Safety and hygiene requirements
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN ISO 10472-3:2008 Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)
EN 1870-19:2013 Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws
EN ISO 8230-2:2008 Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008)
EN 14673:2006+A1:2010 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods
EN 693 : 2001 COR 2011 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
EN 859:2007+A2:2012 Safety of woodworking machines - Hand fed surface planing machines
EN 14044:2014 High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods
EN 1760-1:1997+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
EN 13035-4:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables
EN 1870-17:2012+A1:2015 Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
EN ISO 16089:2015 Machine tools - Safety - Stationary grinding machines (ISO 16089:2015)
EN ISO 16230-1:2015 Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)
EN 14753:2007 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
EN 1175-3:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
EN 13732:2013 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene
EN 1674:2015 Food processing machinery - Dough sheeters - Safety and hygiene requirements
EN 848-2 : 2007 COR 2012 SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
EN 13042-5:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses
EN 14886:2008 Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements
EN 861:2007+A2:2012 Safety of woodworking machines - Surface planing and thicknessing machines
EN 940:2009+A1:2012 Safety of woodworking machines - Combined woodworking machines
EN 848-3:2012 Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines
EN 1870-8:2012 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
EN 16743:2016 Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements
EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel
EN 15861:2012 Food processing machinery - Smokehouses - Safety and hygiene requirements
EN 14180:2014 Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing
EN 280:2013+A1:2015 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
EN 15572:2015 Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines
EN 415-6:2013 Safety of packaging machines - Part 6: Pallet wrapping machines
EN 16474:2015 Plastics and rubber machines - Tyre curing machines - Safety requirements
EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
EN 14010:2003+A1:2009 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
EN 16327:2014 Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
EN ISO 14120:2015 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015)
EN ISO 10218-2:2011 Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)
EN 15180:2014 Food processing machinery - Food depositors - Safety and hygiene requirements
EN 289:2014 Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
EN 415-5:2006+A1:2009 Safety of packaging machines - Part 5: Wrapping machines
EN ISO 11161:2007/A1:2010 SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS
EN 14655:2005+A1:2010 Food processing machinery - Baguette slicers - Safety and hygiene requirements
EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements
EN 13390:2002+A1:2009 Food processing machinery - Pie and tart machines - Safety and hygiene requirements
EN 1870-12:2013 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
EN 13616:2004/AC:2006 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
EN ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)
EN 500-4:2011 Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines
EN 1870-10:2013 Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
EN 931:1997+A2:2009 Footwear manufacturing machines - Lasting machines - Safety requirements
UNI EN 203-1 : 2014 GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES
EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
EN 1870-9:2012 Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
EN 15906:2011 Winter maintenance equipment - Snow removal machines with rotating tools - Specification and clearing capacity
EN 1846-2:2009+A1:2013 Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance
EN 14658:2005+A1:2010 Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining
EN 1028-1:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements
EN 14070:2003+A1:2009/AC:2010 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
EN 13736:2003+A1:2009 Safety of machine tools - Pneumatic presses
I.S. EN 12012-4:2006 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
DIN EN ISO 8230-2:2009-05 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 2: MACHINES USING PERCHLOROETHYLENE
BS EN 61800-2:2015 Adjustable speed electrical power drive systems General requirements. Rating specifications for low voltage adjustable speed a.c. power drive systems
BS EN 13616-2:2016 Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices without a closure device
DIN EN 1010-2:2011-05 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery (includes Amendment A1:2010)
BS EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines Machines using combustible solvents
09/30179767 DC : 0 BS EN 12653:1999/A2 - FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
UNE-EN 61400-1:2006 Wind turbines - Part 1: Design requirements
I.S. EN ISO 10218-1:2011 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 1: ROBOTS
CEN/TR 115-3:2017 Safety of escalators and moving walks - Part 3: Correlation between EN 115-1:2008+A1:2010 and EN 115-1:2017
92/79393 DC : DRAFT JULY 1992 ISO/DIS 11161 - INDUSTRIAL AUTOMATION SYSTEMS - SAFETY OF INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS
DIN EN 13035-11:2010-07 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (includes Amendment A1:2010)
UNI EN ISO 13482 : 2014 ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS
11/30254129 DC : 0 BS EN 12547 - CENTRIFUGES - COMMON SAFETY REQUIREMENTS
EN ISO 16924:2018 Natural gas fuelling stations - LNG stations for fuelling vehicles (ISO 16924:2016)
DIN EN 16147:2015-08 (Draft) HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING, PERFORMANCE RATING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS
I.S. EN ISO 16092-1:2018 MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS (ISO 16092-1:2017)
13/30271339 DC : 0 BS ISO 13577-4 - INDUSTRIAL FURNACE AND ASSOCIATED PROCESSING EQUIPEMENT - SAFETY - PART 4: PROTECTIVE SYSTEMS
I.S. EN ISO 12100-2:2003 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
DIN EN 691-1:2013-01 SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 1570-1 E : 2015 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
09/30206358 DC : DRAFT SEP 2009 BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 1034-8:2012-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
UNE-EN 50177:2010 Stationary electrostatic application equipment for ignitable coating powders - Safety requirements
I.S. EN 13814:2005 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
I.S. EN ISO 12100-1:2003 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
09/30173318 DC : 0 BS IEC 62523 - RADIATION PROTECTION INSTRUMENTATION - CARGO/VEHICLE RADIOGRAPHIC INSPECTION SYSTEM
I.S. EN 13035-11:2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 11: DRILLING MACHINES
13/30294106 DC : 0 BS EN 61784-3 ED 3.0 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS
I.S. EN 1870-1:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
16/30318924 DC : 0 BS EN ISO 19085-6 - WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES (&#39;TOUPIES&#39;)
I.S. HD 60364-7-717:2010 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS
18/30366946 DC : 0 BS EN 17206 - ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS)
BS EN 16500:2014 Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements
I.S. EN ISO 8230:1998 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
ISO 22967:2010 Forced draught gas burners
I.S. EN 1870-13:2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
09/30181712 DC : 0 BS EN 12855:2003/A1 - FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 669:2016 Resistance welding. Resistance welding equipment. Mechanical and electrical requirements
16/30341470 DC : 0 BS EN ISO 19085-10 - WOODWORKING MACHINES - SAFETY - PART 10: BUILDING SITE SAWS (CONTRACTOR SAWS)
CEI EN 60519-7 : 2010 SAFETY IN ELECTROHEAT INSTALLATIONS - PART 7: PARTICULAR REQUIREMENTS FOR INSTALLATIONS WITH ELECTRON GUNS
BS EN ISO 18217:2015 Safety of woodworking machines. Edge-banding machines fed by chain(s)
ISO 22968:2010 Forced draught oil burners
08/30178375 DC : 0 BS EN 1218-2:2004/A1 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
PREN 15571 : DRAFT 2013 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
12/30260496 DC : 0 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
PREN 13289 : DRAFT 2015 PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
CEI EN 60947-5-8 : 2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-8: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - THREE-POSITION ENABLING SWITCHES
06/30151927 DC : 0 BS ISO 14744-1 REV - WELDING - ACCEPTANCE INSPECTION OF ELECTRON BEAM WELDING MACHINES - PART 1: PRINCIPLES AND ACCEPTANCE CONDITIONS
10/30235571 DC : DRAFT DEC 2010 BS EN 13418 - PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
BS EN 15861:2012 Food processing machinery. Smokehouses. Safety and hygienerequirements
14/30276846 DC : 0 BS EN ISO 18217 - SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED CHAIN(S)
I.S. EN 12042:2014 FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 15879-1:2011 Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling - Part 1: Direct exchange-to-water heat pumps
BS PD ISO/TR 22100-1 : 2015 SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS
13/30291777 DC : 0 BS EN 378-3 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION
UNE-EN 16147:2017 Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units. (Consolidated version)
11/30239643 DC : 0 BS EN ISO 13856-2 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
EN 1218-2:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains
14/30302355 DC : 0 BS EN ISO 11553-1 ED.2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS
BS ISO 4414:1998 Pneumatic fluid power. General rules relating to systems
CEI EN 60073 : 2003 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
BS EN 50050-1:2013 Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable liquid coating materials
15/30300474 DC : DRAFT FEB 2015 BS ISO 19085-5 - WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS
I.S. EN 60703:2009 TEST METHODS FOR ELECTROHEATING INSTALLATIONS WITH ELECTRON GUNS
DIN EN 15165 E : 2015 FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 16147:2017 HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING, PERFORMANCE RATING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS
10/30232422 DC : DRAFT DEC 2010 BS EN 1870-9 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
12/30273148 DC : 0 BS EN 15467 - FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 15774:2010 FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
10/30238615 DC : DRAFT NOV 2010 BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
PREN 500-4 : DRAFT 2010 MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 4: SPECIFIC REQUIREMENTS FOR COMPACTION MACHINES
15/30298059 DC : 0 BS EN 60947-5-5 ED 1.0/AMD 2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
CEI EN 50050-3 : 2014 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
05/30076959 DC : DRAFT APR 2005 BS EN 12453 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER-OPERATED DOORS - REQUIREMENTS
13/30273033 DC : 0 BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
11/30203207 DC : 0 BS EN ISO 14119 - SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
03/306594 DC : DRAFT APR 2003 BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE
ISO 16090-1:2017 Machine tools safety — Machining centres, Milling machines, Transfer machines — Part 1: Safety requirements
03/306595 DC : 0 BS EN 14677 - SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
DIN EN 16743 E : 2016 FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1870-6:2017 Safety of woodworking machines. Circular sawing machines Circular sawing machines for fire wood
13/30255976 DC : 0 BS ISO 7076-5 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 5: COMPRESSED AIR FOAM EQUIPMENT
12/30257495 DC : 0 BS EN 61082-1 - PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES
15/30329716 DC BS EN 13289. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements
10/30233953 DC : 0 BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS
ISO 17532:2007 Stationary equipment for agriculture Data communications network for livestock farming
DIN EN 1570-2 E : 2017 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
UNE-EN 1870-18:2013 Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws
I.S. EN ISO 669:2016 RESISTANCE WELDING - RESISTANCE WELDING EQUIPMENT - MECHANICAL AND ELECTRICAL REQUIREMENTS (ISO 669:2016)
I.S. EN 1010-2:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
UNE-EN 15571:2015 Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
16/30331355 DC : 0 BS EN ISO 19085-8 - WOODWORKING MACHINES - SAFETY - PART 8: WIDE BELT CALIBRATING AND SANDING MACHINES
BS EN ISO 4254-14:2016 Agricultural machinery. Safety Bale wrappers
16/30339195 DC BS EN 81-41. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Part 41. Vertical lifting platforms intended for use by persons with impaired mobility
DIN EN 15954-2:2013-11 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
14/30292850 DC : 0 BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
IEEE N42.44-2008 American National Standard for the Performance of Checkpoint Cabinet X-Ray Imaging Security Systems
14/30299146 DC : 0 BS EN 16743 - FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 415-8:2011-06 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
BS ISO 16923 : 2016 NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES
I.S. EN 12417:2001 MACHINE TOOLS - SAFETY - MACHINING CENTRES
DIN EN 81-31:2010-08 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts
09/30182299 DC : 0 BS EN 1010-2:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
04/301784 DC : DRAFT JAN 2004 EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES
06/30151143 DC : 0 BS ISO 10245-3 - CRANES - LIMITING AND INDICATING DEVICES - PART 3: TOWER CRANES
CSA IEC 61400-24:2012 WIND TURBINES - PART 24: LIGHTNING PROTECTION
BIS IS/ISO 12643-1 : 2009 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE-EN 13616-2:2016 Overfill prevention devices for static tanks for liquid fuels - Part 2: Overfill prevention devices without a closure device
ISO/TR 13062:2015 Electric mopeds and motorcycles - Terminology and classification
DIN EN 1034-27:2012-12 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems
UNE-EN ISO 14120:2016 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015)
17/30356573 DC : 0 BS IEC 62046 ED1.0 - SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS
08/30180969 DC : DRAFT APR 2008 BS EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES
09/30178385 DC : DRAFT FEB 2009 BS EN 1218-5:2004/A1 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FED BY CHAIN
ANSI/ISO 12100 : 2012 SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
DIN EN 15180 E : 2015 FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
08/30186475 DC : 0 BS EN 13617-1 AMD1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
BS ISO 13577-4:2014 Industrial furnace and associated processing equipment. Safety Protective systems
05/30135286 DC : 0 EN 15268 - PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND PERFORMANCE OF SUBMERSIBLE PUMP ASSEMBLIES
BS EN ISO 13856-1:2013 Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
BS EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Equipment for testing the safety of electrical equipment of machinery
BS EN ISO 23125:2015 Machine tools. Safety. Turning machines
04/300089 DC : DRAFT JAN 2004 ISO/IEC 13850 ED.2 - SAFETY OF MACHINERY - EMERGENCY STOP - PRINCIPLES FOR DESIGN
09/30178340 DC : 0 BS EN 1870-10:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 15746-2:2016-02 (Draft) Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015
BS ISO 12649:2004 Graphic technology. Safety requirements for binding and finishing systems and equipment
BS EN 61784-3-14:2010 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 14
NF EN 61310-2 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
BS EN 60950-23:2006 Information technology equipment. Safety Large data storage equipment
PD ISO/TR 17529:2014 Machine tools. Practical guidance and example of risk assessment on electro-discharge machines
BS EN ISO 16923:2018 Natural gas fuelling stations. CNG stations for fuelling vehicles
BS EN 50374:2004 Conductor cars
08/30182672 DC : DRAFT MAY 2008 BS EN 60034-1 - ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
BS ISO 14990-3:2016 Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems Particular requirements for self-powered machines
11/30245401 DC : 0 BS EN 1034-8 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
09/30178334 DC : DRAFT FEB 2009 BS EN 1870-8:2001/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
EN ISO 19085-8:2018 Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017)
EN 62745:2017 Safety of machinery - Requirements for cableless control systems of machinery
BS EN 61784-3-3:2017 Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 3
NF EN 115-2 : 2010 SAFETY OF ESCALATORS AND MOVING WALKS - PART 2: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING ESCALATORS AND MOVING WALKS
IEC 62745:2017 Safety of machinery - Requirements for cableless control systems of machinery
05/19981949 DC : DRAFT MAY 2005 BS EN 1034-14 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLICERS
06/30145325 DC : DRAFT JUN 2006 IEC 60519-7 - SAFETY IN ELECTROHEAT INSTALLATIONS - PART 7: PARTICULAR REQUIREMENTS FOR INSTALLATIONS WITH ELECTRON GUNS
UNE-EN ISO 18217:2016 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
BS EN 81-40:2008 Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Stairlifts and inclined lifting platforms intended for persons with impaired mobility
BS ISO 4413:1998 Hydraulic fluid power. General rules relating to systems
CAN/CSA-Z431-12 (R2016) Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators (Adopted IEC 60073:2002, sixth edition, 2002-05, with Canadian deviations) | Principes fondamentaux et de s?curit? pour l'interface homme-machine, le marquage et l'identification - Principes de codage pour les indicateurs et les organes de commande (norme IEC 60073:2002 adopt?e, sixi?me ?dition, 2002-05, avec exigences propres au Canada)
I.S. EN 61557-14:2013 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1 000 V A.C. AND 1 500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 14: EQUIPMENT FOR TESTING THE SAFETY OF ELECTRICAL EQUIPMENT OF MACHINERY (IEC 61557-14:2013 (EQV))
09/30181667 DC : 0 BS EN 13035-6:2006/A1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
05/19981969 DC : DRAFT JUN 2005 BS EN 1034-5 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
05/30132831 DC : DRAFT APR 2005 IEC 60947-5-8 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-8: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - THREE-POSITION ENABLING SWITCHES
09/30190333 DC : 0 BS EN 61400-24 - WIND TURBINES - PART 24: LIGHTNING PROTECTION
09/30176666 DC : 0 BS EN 62079 - PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION
02/705139 DC : DRAFT APR 2002 PREN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
CAN/CSA-B354.6:17 Mobile elevating work platforms — Design, calculations, safety requirements, and test methods (Adopted ISO 16368:2010, second edition , 2010-05-15, with Canadian deviations)
I.S. EN ISO 16230-1:2015 AGRICULTURAL MACHINERY AND TRACTORS - SAFETY OF HIGHER VOLTAGE ELECTRICAL AND ELECTRONIC COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS (ISO 16230-1:2015)
CEI EN 82079-1 : 2013 PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
UNE-EN ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)
08/30195428 DC : 0 BS EN 60519-6 - SAFETY IN ELECTROHEAT INSTALLATIONS - PART 6: SPECIFICATIONS FOR SAFETY IN INDUSTRIAL MICROWAVE HEATING EQUIPMENT
ANSI/ASSE Z244.1 : 2016 THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS
CSA C61400-3 : 2011 WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
DIN EN 13035-2 E : 2008 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
UNE-EN 13136:2014 Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
IEC 61784-3-17:2016 Industrial communication networks - Profiles - Part 3-17: Functional safety fieldbuses - Additional specifications for CPF 17
DIN EN 15094 E : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS
DIN EN 14677 E : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
ISO 6858:2017 Aircraft — Ground support electrical supplies — General requirements
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
EN 61784-3-2:2017 Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2
EN 50569:2013/A1:2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
IEEE 45.6-2016 IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing
I.S. HD 384.7.711:2003 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
BS EN 61400-24:2010 Wind turbines Lightning protection
UNI ISO 20898 : 2009 INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS
UNE-EN 16252:2013 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
I.S. EN ISO 19085-2:2017&LC:2018 WOODWORKING MACHINES - SAFETY - PART 2: HORIZONTAL BEAM PANEL CIRCULAR SAWING MACHINES (ISO 19085-2:2017, CORRECTED VERSION 2017-11-01)
I.S. EN 60034-1:2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
IEEE/ANSI N42.47-2010 American National Standard for Measuring the Imaging Performance of X-ray and Gamma-ray Systems for Security Screening of Humans
I.S. EN ISO 15012-4:2016 HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 4: GENERAL REQUIREMENTS (ISO 15012-4:2016)
I.S. EN 60519-7:2008 SAFETY IN ELECTROHEAT INSTALLATIONS - PART 7: PARTICULAR REQUIREMENTS FOR INSTALLATIONS WITH ELECTRON GUNS
I.S. EN 50050-3:2013 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
CEI EN 61784-3-13 : 2012 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-13: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 13
I.S. EN 81-20:2014 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
S.R. HD 60364-7-740:2006 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
ISO 14990-1:2016 Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements
BS EN 62061 : 2005 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS
I.S. EN ISO 16923:2018 NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016)
I.S. EN 1034-8:2012 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
CEI EN 50348 : 2011 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 415-8:2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
I.S. EN ISO 19085-1:2017 WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
CSA C22.2 No. 62282-2 :2007 FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
UNI ISO/TR 14121-2 : 2013 SAFETY OF MACHINERY - RISK ASSESSMENT - PART 2: PRACTICAL GUIDANCE AND EXAMPLES OF METHODS
PREN 453 : DRAFT 2011 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 13856-1:2013 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
BS EN 15746-2 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 61784-3-8:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-8: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 8
I.S. EN 14677:2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
BS EN 115-1:2017 Safety of escalators and moving walks Construction and installation
ISO/TS 22559-2:2010 Safety requirements for lifts (elevators) Part 2: Safety parameters meeting the global essential safety requirements (GESRs)
I.S. EN 1870-19:2013 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
BS EN ISO 19085-1:2017 Woodworking machines. Safety Common requirements
UNE-EN 60974-1:2013 Arc welding equipment - Part 1: Welding power sources
ISO 16089:2015 Machine tools Safety Stationary grinding machines
ISO/TS 22595-2:2008 Dentistry Plant area equipment Part 2: Compressor systems
DIN EN ISO 16089:2016-06 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015)
I.S. EN 378-1:2016 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
EN ISO 18217:2015 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
UNI EN 15166 : 2009 FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
15/30279801 DC : 0 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 1672-1 : 2014 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
UNI EN 13035-6 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
15/30314036 DC : 0 BS EN 12012-1 - PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS
I.S. EN 61400-3:2009 WIND TURBINES - PART 3: DESIGN REQUIREMENTS FOR OFFSHORE WIND TURBINES
EN ISO 19085-2:2017 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, Corrected version 2017-11-01)
I.S. EN 61784-3-14:2010 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-14: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 14
I.S. EN 115-2:2010 SAFETY OF ESCALATORS AND MOVING WALKS - PART 2: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING ESCALATORS AND MOVING WALKS
ANSI/ISO 12100-2 : 2007 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
PREN 1417 : DRAFT 2013 PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
PREN 16517 : DRAFT 2017 AGRICULTURAL AND FORESTRY MACHINERY - MOBILE YARDERS FOR TIMBER LOGGING - SAFETY
ISO 14118:2017 Safety of machinery — Prevention of unexpected start-up
XP ISO/TS 22595-2 : 2008 XP DENTISTRY - PLANT AREA EQUIPMENT - PART 2: COMPRESSOR SYSTEMS
NF EN 60034-1 : 2011 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
I.S. EN ISO 23125:2015 MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015)
EN 13136:2013 Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
UNE-EN 82079-1:2015 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
UNE-EN ISO 17916:2016 Safety of thermal cutting machines (ISO 17916:2016)
ISO 21789:2009 Gas turbine applications — Safety
EN 12301:2000+A1:2008 Plastics and rubber machines - Calenders - Safety requirements
BS EN 809:1998+A1:2009 Pumps and pump units for liquids. Common safety requirements
DIN EN 619:2011-02 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads (includes Amendment A1:2010)
EN 16147:2017/AC:2017 HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - TESTING, PERFORMANCE RATING AND REQUIREMENTS FOR MARKING OF DOMESTIC HOT WATER UNITS
IEC 62840-2:2016 Electric vehicle battery swap system - Part 2: Safety requirements
I.S. EN ISO 12100:2010 SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
DIN EN 1374:2011-01 Agricultural machinery - Silos stationary unloaders for round silos - Safety (includes Amendment A1:2010)
ISO 13577-2:2014 Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems
I.S. EN 60204-33:2011 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
DIN EN 1870-4:2012-06 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 61800-5-2:2017 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
I.S. EN 61496-1:2013 SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS
ISO 5149-2:2014 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation
I.S. EN 13035-6:2006 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 6: MACHINES FOR BREAK-OUT
I.S. EN 61800-2:2015 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED A.C. POWER DRIVE SYSTEMS
I.S. EN 50223:2015 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
I.S. EN 12012-1:2007 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
IEC 61784-3-13:2016 Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13
I.S. EN 676:2003 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
EN 62061:2005/A2:2015 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015)
UNE-EN 12463:2006 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements
EN 61784-3-18:2011/A1:2017 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18 (IEC 61784-3-18:2011/A1:2016)
EN 61784-3-13:2017 Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13
DIN EN 13390:2011-02 Food processing machinery - Pie and tart machines - Safety and hygiene requirements (includes Amendment A1:2009)
DIN EN 14678-1:2013-06 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
DIN EN ISO 22827-1:2006-02 Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005)
DIN EN 13621:2011-02 Food processing machinery - Salad dryers - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN 13570:2011-02 Food processing machinery - Mixing machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN ISO 11161:2010-10 Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007 + Amd 1:2010); German version EN ISO 11161:2007 + A1:2010
DIN EN 415-6:2013-09 Safety of packaging machines - Part 6: Pallet wrapping machines
DIN EN 1501-1:2016-03 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles (includes Amendment A1:2015)
DIN EN 1218-2:2009-10 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains (includes Amendment A1:2009)
EN 50571:2013/A1:2018 Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
DIN EN 12012-4:2010-01 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
DIN EN 1612-1:2009-07 PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 1: SAFETY REQUIREMENTS FOR METERING AND MIXING UNITS
DIN EN 500-4:2011-06 Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines
DIN EN 1028-1:2008-09 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
DIN EN 13289:2015-12 (Draft) Pasta processing plant - Dryers and coolers - Safety and hygiene requirements; German and English version prEN 13289:2015
DIN EN 13534:2011-02 Food processing machinery - Curing injection machines - Safety and hygiene requirements (includes Amendment A1:2010)
DIN EN ISO 13849-1:2016-06 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
DIN EN 12921-2:2010-01 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids (includes Amendment A1:2008)
DIN EN 13457:2010-10 Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements; German version EN 13457:2004+A1:2010
DIN EN ISO 11252:2014-02 LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION (ISO 11252:2013)
DIN EN 1870-5:2013-01 Safety of woodworking machines - Circular sawing machines - Part 5: Circular saw benches/up-cutting cross-cut sawing machines (includes Amendment A2:2012)
DIN EN 1760-2:2009-08 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS
DIN EN 12921-3:2010-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids (includes Amendment A1:2008)
DIN EN 1889-1 E : 2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
DIN EN 1760-1:2009-08 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
DIN EN 609-2:2010-07 Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters (includes Amendment A1:2009)
DIN EN 13367:2010-05 Ceramic machines - Safety - Transfer platforms and cars (includes Amendment A1:2008 + Corrigendum AC:2009)
DIN EN 1501-2:2010-02 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles (includes Amendment A1:2009)
DIN EN 14681 E : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
DIN EN 81-22:2014-12 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path
DIN EN 1218-5:2010-02 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain (includes Amendment A1:2009)
DIN EN 453:2015-04 FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13035-4 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 4: TILTING TABLES
DIN EN 289:2014-09 PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
DIN EN 13871:2015-01 FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
BS ISO 5149-2:2014 Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation
BS EN ISO 10472-4:2008 Safety requirements for industrial laundry machinery Air dryers
ISO 10472-3:1997 Safety requirements for industrial laundry machinery Part 3: Washing tunnel lines including component machines
UNE-EN 61439-1:2012 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
UNE-EN 285:2016 Sterilization - Steam sterilizers - Large sterilizers
UNE-EN 1674:2015 Food processing machinery - Dough sheeters - Safety and hygiene requirements
BS EN 12012-4 : 2006 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
BS EN 1422:2014 Sterilizers for medical purposes. Ethylene oxide sterilizers. Requirements and test methods
IEC 61784-3-14:2010 Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14
IEC 62626-1:2014 Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work
DIN EN 14710-1 E : 2009 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS
BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
BS EN 1870-8:2012 Safety of woodworking machines. Circular sawing machines Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
UNE-EN 12779:2016 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
BS EN 1218-1 : 1999 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
BS EN 1034-13 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
IEC 61784-3:2016+AMD1:2017 CSV Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions
IEC 60079-17:2013 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
BS EN 14957 : 2006 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
BS EN 609-1:2017 Agricultural and forestry machinery. Safety of log splitters Wedge splitters
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
BS EN 60974-9:2010 Arc welding equipment Installation and use
BS EN 1845:2007 Footwear manufacturing machines. Footwear moulding machines. Safety requirements
08/30182293 DC : 0 BS EN 746-3:1997/A1 - INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES
BS EN 692 : 2005 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
IEC 82079-1:2012 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
BS EN 62135-1:2015 Resistance welding equipment Safety requirements for design, manufacture and installation
BS EN 12581 : 2005 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
IEC 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c - Equipment for testing,measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machinery
BS EN 14656 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
BS EN 13814:2004 Fairground and amusement park machinery and structures. Safety
BS EN 12629-8 : 2002 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 8: MACHINES AND EQUIPMENT FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CALCIUM-SILICATE (AND CONCRETE)
BS EN 609-2 : 2000 AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 2: SCREW SPLITTERS
IEC 61400-24:2010 Wind turbines - Part 24: Lightning protection
ISO 669:2016 Resistance welding Resistance welding equipment Mechanical and electrical requirements
BS EN 12012-2 : 2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
BS EN 13732:2013 Food processing machinery. Bulk milk coolers on farms. Requirements for performance, safety and hygiene
ISO 4254-14:2016 Agricultural machinery Safety Part 14: Bale wrappers
UNE-EN 1808:2016 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
BS EN 14043:2014 High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods
DD ISO/TS 22559-2:2010 Safety requirements for lifts (elevators) Safety parameters meeting the global essential safety requirements (GESRs)
BS EN 848-3:2012 Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines
BS EN 1114-1:2011 Plastics and rubber machines. Extruders and extrusion lines Safety requirements for extruders
BS EN 14678-1:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers
BS EN 50628:2016 Erection of electrical installations in underground mines
DD ISO/TS 20100:2008 Gaseous hydrogen. Fuelling stations
BS EN 12387 : 2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
BS EN 60825-4 : 2006 SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS
16/30354067 DC : 0 BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY
BS EN ISO 11553-1:2008 Safety of machinery. Laser processing machines General safety requirements
BS EN 415-6:2013 Safety of packaging machines Pallet wrapping machines
BS EN 1953:2013 Atomising and spraying equipment for coating materials. Safety requirements
ISO 28881:2013 Machine tools Safety Electro-discharge machines
BS EN 12158-1 : 2000 BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS
I.S. EN 860:2007 SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
BS EN 13042-2 : 2004 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 2: HANDLING MACHINES FOR FEEDING
BS EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery Common requirements
BS EN 1915-1:2013 Aircraft ground support equipment. General requirements Basic safety requirements
BS EN 1012-1:2010 Compressors and vacuum pumps. Safety requirements Air compressors
BS EN 1034-22 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS
BS EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar. Safety requirements
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
06/30148719 DC : DRAFT APR 2006 IEC 62026-2 ED.2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (C DIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I)
BS EN 14655 : 2005 FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 617 : 2001
BS EN 14658 : 2005 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
IEC 60204-31:2013 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
IEC 61784-3-1:2010 Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1
IEC 60519-7:2008 Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns
BS EN 14681 : 2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
07/30173977 DC : 0 BS EN 62485-3 - SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES
BS EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies General rules
BS EN 13390 : 2002 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
07/30173638 DC : 0 BS EN 60974-9 - ARC WELDING EQUIPMENT - PART 9: INSTALLATION AND USE
ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
BS EN 1870-14 : 2007 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
BS EN ISO 5826:2014 Resistance welding equipment. Transformers. General specifications applicable to all transformers
BS EN 1870-17 : 2012 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
PD ISO/TR 14799-1:2005 Comparison of worldwide escalator and moving walk safety standards Rule by rule comparison
IEC 62282-3-1:2007 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
BS EN 12921-1 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
BS EN 12463:2014 Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements
BS EN ISO 11111-5 : 2005 TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 5: PREPARATORY MACHINERY TO WEAVING AND KNITTING (ISO 11111-5:2005)
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
DIN EN 14812:2007-09 WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
BS EN 1218-3 : 2001 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
UNI EN 1218-1 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
DIN EN 953:1997-11 SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
EN 12853:2001+A1:2010/AC:2010 FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12693:2008-09 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
EN 1012-3:2013 Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
DIN EN 1846-2:2013-05 Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance (includes Amendment A1:2013)
EN 203-1:2014/AC:2016 GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES
EN 1114-3:2001+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
EN 1034-22:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders
EN 1034-14:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
EN 13288:2005+A1:2009 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
EN 13367:2005+A1:2008/AC:2009 CERAMIC MACHINES - SAFETY - TRANSFER PLATFORMS AND CARS
EN 1034-3:2011 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders
EN 12921-3:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
DIN EN 14803:2006-05 IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE
EN 60940:2015 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression
EN 13042-2:2004+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding
EN 60947-5-3:2013 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
EN 62079:2001 Preparation of instructions - Structuring, content and presentation
DIN EN 13035-1:2008-06 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
EN ISO 11252:2013 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)
UNI EN 1218-2 : 2009 SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
EN ISO 28881:2013/AC:2013 Machine tools - Safety - Electro-discharge machines - Technical Corrigendum 1 (ISO 28881:2013/Cor 1:2013)
EN 62282-5-1:2012 FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012)
DIN EN 1570-2:2017-03 SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
DIN EN 12110:2003-05 TUNNELLING MACHINES - AIR LOCKS - SAFETY REQUIREMENTS
EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements
EN 60079-17:2014 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation
DIN EN 14710-1:2009-06 Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements
NF EN 60519-1 : 2015 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
HD 60364-7-740:2006/A11:2017 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
EN 60204-31:2013 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
EN 12629-1:2000+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements
UNI EN 620 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR FIXED BELT CONVEYORS FOR BULK MATERIALS
DIN EN 81-41:2011-09 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
EN 12348:2000+A1:2009 Core drilling machines on stand - Safety
EN 1034-16:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines
EN 1034-4:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities
EN 12629-2:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines
EN 60439-1:1999/A1:2004 LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar - Safety requirements
EN 13862:2001+A1:2009 Floor cutting-off machines - Safety
EN 1012-1:2010 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
EN 60974-9:2010 Arc welding equipment - Part 9: Installation and use
EN 60034-1:2010/corrigendum Oct. 2010 ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE
DIN EN 14886:2008-06 Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements
EN 12110:2014 Tunnelling machines - Air locks - Safety requirements
DIN EN 953:2009-07 SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
DIN EN 13898:2009-09 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
EN 60204-33:2011 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
EN 12957:2001+A1:2009 Machine tools - Safety - Electro discharge machines
EN 61400-24:2010 Wind turbines - Part 24: Lightning protection
EN 12840 : 2001 SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
I.S. EN ISO 11161:2007 SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS
EN 62135-1:2015/AC:2016-02 RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
EN 60417-1:2002 GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 1: OVERVIEW AND APPLICATION
EN 50628:2016 Erection of electrical installations in underground mines
EN 61800-7-202:2016 Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification
EN 13570:2005+A1:2010 Food processing machinery - Mixing machines - Safety and hygiene requirements
DIN EN 983:1996-09 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
DIN EN 81-20:2014-11 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS
EN 12750:2013 Safety of woodworking machines - Four sided moulding machines
DIN EN 983:2009-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
EN 60974-1:2012 Arc welding equipment - Part 1: Welding power sources
DIN EN 12151:2008-05 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
EN 50050-1:2013 Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials
EN 13389:2005+A1:2009 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
EN 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
EN 61082-1:2015 Preparation of documents used in electrotechnology - Part 1: Rules
DIN EN 15746-2:2011-12 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011)
EN 50050-2 : 2013 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
EN 12111:2014 Tunnelling machines - Road headers and continuous miners - Safety requirements
DIN EN 12012-1:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
EN 12158-1:2000+A1:2010 Builders' hoists for goods - Part 1: Hoists with accessible platforms
UNE-EN 809:1999 PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
UNE-EN 1034-5:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters
UNE-EN 1034-2:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
UNE-EN 860:2007+A2:2012 Safety of woodworking machines - One side thickness planing machines
UNE-EN 12203:2004 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
UNE-EN 13390:2002 Food processing machinery- Pie and tart machines - Safety and hygiene requirements.
UNE-EN 1870-17:2013 Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
UNE-EN ISO 10218-1:2012 Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)
UNE-EN 848-2:2007+A1:2010 Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines
UNE-EN 12757-1:2006+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
UNE-EN 848-2:2007 Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines
UNE-EN 1501-2:2006 Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
UNE-EN 1673:2001 Food procesing machinery. Rotatory rack ovens. Safety and hygiene requirements.
UNE-EN 1034-22:2006 Safety of machinerie - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders
UNE-EN 15746-2:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
UNE-EN 12629-7:2005 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products
UNE-EN 12757-1:2006 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
UNE-EN 1870-5:2003 Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines.
UNE-EN 415-5:2007 Safety of packaging machines - Part 5: Wrapping machines
UNE-EN 14658:2006 Continuous handling equipment and systems. General safety requirements for continuous handling equipment for opencast lignite mining
UNE-EN 859:2008+A2:2012 Safety of woodworking machines - Hand fed surface planing machines
UNE-EN 500-1:2007 Mobile road construction machinery - Safety - Part 1: Common requirements
UNE-EN 1034-6:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
UNE-HD 60364-7-717:2013 Low-voltage electrical installations -- Part 7-717: Requirements for special installations or locations - Mobile or transportable units
UNE-EN 12044:2006 Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
UNE-EN 12629-1:2001 MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FORM CONCRETE AND CALCIUM-SILICATE. SAFETY. PART 1: COMMON REQUIREMENTS
UNE-EN 1570-1:2012 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
UNE-EN 1034-14:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
UNE-EN 1501-1:2012 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles
UNE-EN 1034-4:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities
UNE-EN 1034-13:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units

IEC 60320-1:2015 Appliance couplers for household and similar general purposes - Part 1: General requirements
IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
IEC TR 61912-1:2007 Low-voltage switchgear and controlgear - Overcurrent protective devices - Part 1: Application of short-circuit ratings
EN 50160 : 2010 AMD 1 2015 VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
IEC 60038:2009 IEC standard voltages
IEC 60947-6-2:2002+AMD1:2007 CSV Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
IEC 61000-6-4:2006+AMD1:2010 CSV ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60364-4-43:2008 Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
IEC 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers
IEC 60228:2004 Conductors of insulated cables
ISO 14122-3:2016 Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
IEC 61984:2008 Connectors - Safety requirements and tests
ISO 14122-1:2016 Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
IEC 60204-31:2013 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
IEC 62491:2008 Industrial systems, installations and equipment and industrial products - Labelling of cables and cores
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEC 61175:2005 Industrial systems, installations and equipment and industrial products - Designation of signals
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
IEC TR 60909-1:2002 Short-circuit currents in three-phase a.c. systems - Part 1: Factors for the calculation of short-circuit currents according to IEC 60909-0
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
IEC 62023:2011 Structuring of technical information and documentation
NFPA 79 : 2015 ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
IEC 61643-12:2008 Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles
IEC GUIDE 106:1996 Guide for specifying environmental conditions for equipmentperformance rating
IEC 81346-1:2009 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules
IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control
IEC 61558-2-16:2009+AMD1:2013 CSV Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units
IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
IEC 60909-0:2016 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
ISO 13851:2002 Safety of machinery Two-hand control devices Functional aspects and design principles
IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV Low-voltage fuses - Part 1: General requirements
IEC 62027:2011 Preparation of object lists, including parts lists
IEC 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
IEC 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
IEC 81346-2:2009 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 2: Classification of objects and codes for classes
IEC TR 61000-5-2:1997 Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling
IEC 61082-1:2014 RLV Preparation of documents used in electrotechnology - Part 1: Rules
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
IEC 60757:1983 Code for designation of colours
IEC 61355:1997 Classification and designation of documents for plants, systems and equipment
IEC 60364-1:2005 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
AS/NZS 4024.1603:2019 Safety of machinery Design of controls, interlocks and guards - Prevention of unexpected start-up
IEC 62305-1:2010 Protection against lightning - Part 1: General principles
IEC 60947-5-8:2006 Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
IEC 62507-1:2010 Identification systems enabling unambiguous information interchange - Requirements - Part 1: Principles and methods
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
IEC TR 60755:2008 General requirements for residual current operated protective devices
AS/NZS 62061:2019 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005+AMD1:2012+AMD2:2015 CSV (ED.1.2)/COR1:2015 MOD)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
IEC 61000-6-1:2016 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
IEC 61496-1:2012 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
IEC 60204-33:2009 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
IEC 61000-6-4:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
IEC 62020:1998+AMD1:2003 CSV Electrical accessories - Residual current monitors for household and similar uses (RCMs)
HD 516 S2:1997/A2:2008 GUIDE TO USE OF LOW VOLTAGE HARMONIZED CABLES
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
IEC 61506:1997 Industrial-process measurement and control - Documentation ofapplication software
IEC 62305-4:2010 Protection against lightning - Part 4: Electrical and electronic systems within structures
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
IEC 60947-5-2:2007+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 61439-1:2011 Low-voltage switchgear and controlgear assemblies - Part 1: General rules
IEC 62745:2017 Safety of machinery - Requirements for cableless control systems of machinery
IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
IEC 82079-1:2012 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
IEC PAS 62569-1:2009 Generic specification of information on products - Part 1: Principles and methods
IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
ISO 14122-2:2016 Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
IEC 61666:2010 Industrial systems, installations and equipment and industrial products - Identification of terminals within a system
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC TR 60890:2014 A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation
IEC 60364-5-52:2009 Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
IEC 60947-5-5:1997+AMD1:2005+AMD2:2016 CSV Low-voltage switchgear and controlgear - Part 5-5: Control circuitdevices and switching elements - Electrical emergency stop device with mechanical latching function

View more information
$640.74
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more