IEC 60216-2:2005
Current
Current
The latest, up-to-date edition.
Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French
Published date
11-08-2005
Publisher
FOREWORD
1 Scope
2 Normative references
3 General considerations
4 Guide for the choice of properties and end-points
Annex A (informative) Additional Information on the group
to which new or unknown materials
should be assigned
Gives guidance for the choice of test criteria for the determination of thermal endurance characteristics. It includes a list of existing published procedures which is however not exhaustive.The main changes from the previous edition are as follows:- editorial,- Table 1 has been actualized essentially by Part 3 sheets of SC 15C publications.
| Committee |
TC 112
|
| DevelopmentNote |
Also numbered as BS 5691-2(1995) (08/2005) Stability Date: 2022. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 60216-2 : 2006 | Identical |
| NEN EN IEC 60216-2 : 2005 | Identical |
| I.S. EN 60216-2:2005 | Identical |
| PN EN 60216-2 : 2006 | Identical |
| UNE-EN 60216-1:2002 | Identical |
| SAC GB/T 11026.2 : 2000 | Identical |
| SN EN 60216-2 : 2005 | Identical |
| DIN EN 60216-2 : 2006 | Identical |
| VDE 0304-22 : 2006 | Identical |
| BIS IS 8504-2 : 2013 | Identical |
| BS EN 60216-2:2005 | Identical |
| CEI EN 60216-2 : 2006 | Identical |
| EN 60216-2:2005 | Identical |
| NFC 26 302 : 1990 | Identical |
| UNE-EN 60216-2:2005 | Identical |
| BS EN 61000-4-17:1999+A2:2009 | Identical |
| NFC 26 205 : AMD 81 | Identical |
| CEI 15-50 : 1ED 1997 | Identical |
| BS 5691-2:1979 | Identical |
| BS EN 60780-323:2017 | Nuclear facilities. Electrical equipment important to safety. Qualification |
| BS EN 61241-1:2004 | Electrical apparatus for use in the presence of combustible dust Protection by enclosures \'tD\' |
| IEC 62930:2017 | Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC |
| CSA C22.2 No. 0.17 : 2000 : R2004 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| BS 2782-1.135(1993) : 1993 AMD 10349 | METHODS OF TEST PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT |
| IEC 62899-201:2016 | Printed electronics - Part 201: Materials - Substrates |
| 05/30128627 DC : DRAFT FEB 2005 | IEC 60216-6 ED.2 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD |
| BS 7290-2(1990) : 1990 AMD 10106 | PLASTICS FILMS FOR ELECTRICAL PURPOSES - METHODS OF TEST |
| I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
| 15/30294124 DC : 0 | BS EN 60674-2 ED 2.0 - SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| CEI EN 60216-3 : 2006 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 3: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS |
| EN IEC 61730-1:2018/AC:2018-06 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2016) |
| PD IEC/TS 62446-3:2017 | Photovoltaic (PV) systems. Requirements for testing, documentation and maintenance Photovoltaic modules and plants. Outdoor infrared thermography |
| BS EN 60216-1:2013 | Electrical insulating materials. Thermal endurance properties Ageing procedures and evaluation of test results |
| CSA C22.2 No. 60079.0 : 2015 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| CEI EN 60454-2 : 2008 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| CSA E60079.15 : 2002 : R2011 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL APPARATUS WITH TYPE OF PROTECTION "n" |
| IEC TS 62332-2:2014 | Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified test |
| I.S. EN 60505:2011 | EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
| I.S. EN 62109-1:2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50618:2014 | ELECTRIC CABLES FOR PHOTOVOLTAIC SYSTEMS |
| IEC 60079-0 REDLINE : 7.0 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS EN 50021:1999 | Electrical apparatus for potentially explosive atmospheres. Type of prot ection \'n\' |
| I.S. EN IEC 61730-1:2018 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| ASTM D 1830 : 2017 : REDLINE | Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method |
| IEC 61241-0:2004 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| NF EN 60216-3 : 2006 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 3: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS |
| EN 60137:2017 | Insulated bushings for alternating voltages above 1 000 V |
| IEC 61730-1:2016 | Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction |
| ASTM D 2756 : 2007 : R2012 | Standard Test Method for Weight Loss of Electrical Insulating Varnishes |
| ASTM D 3377 : 2004 | Standard Test Method for Weight Loss of Solventless Varnishes |
| EN IEC 60079-7:2015/A1:2018 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017) |
| BS EN ISO 11248:2000 | Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatures |
| 16/30330036 DC : 0 | BS EN 62788-2 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 2: POLYMERIC MATERIALS USED FOR FRONTSHEETS AND BACKSHEETS |
| EN 60216-6:2006 | Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method |
| EN 60747-5-2:2001/A1:2002 | DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-2: OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS |
| EN 61241-1:2004/corrigendum Dec. 2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD" |
| EN 50021 : 99 COR 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N" |
| EN 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| EN 60505:2011/AC:2017-03 | EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017) |
| EN 60454-2:2007 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| EN 60216-1:2013 | Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
| EN 61212-2:2006 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| EN 60216-3-2:1995 | Guide for the determination of thermal endurance properties of electrical insulating materials - Part 3: Instructions for calculating thermal endurance characteristics - Section 2: Calculations for incomplete data: proof test results up to and including the median time to end-point (equal test groups) |
| NBR IEC 60079-0 : 2013 ERRATA 2 2016 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS 2782-1.136(1994) : 1994 AMD 10687 | METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE SHORT-TERM PERFORMANCE OF THERMOSETTING MOULDING MATERIALS AT ELEVATED TEMPERATURES |
| 04/30111589 DC : 0 | |
| DIN ISO 5630-4 E : 2017 | PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986) |
| 03/300201 DC : DRAFT FEB 2003 | IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| BS EN 60216-8:2013 | Electrical insulating materials. Thermal endurance properties Instructions for calculating thermal endurance characteristics using simplified procedures |
| BS 3G 198-3:1994 | Sleeves for aircraft electric cables and equipment wires Specification for heat-shrinkable sleeving for binding, insulation and identification |
| DIN EN 60216-3-2 : 1997 | GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - PART 3: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS - SECTION 2: CALCULATIONS FOR INCOMPLETE DATA: PROOF TEST RESULTS UP TO AND INCLUDING THE MEDIAN TIME TO END-POINT (EQUAL TEST GROUPS) |
| 00/243930 DC : DRAFT AUG 2000 | IEC 60079-18. ED. 2. ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 18: ENCAPSULATION 'M' |
| I.S. EN 60216-5:2008 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 5: DETERMINATION OF RELATIVE THERMAL ENDURANCE INDEX (RTE) OF AN INSULATING MATERIAL |
| BS EN 50281-1-1:1999 | Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Construction and testing |
| PD IEC/TS 60216-7-1:2015 | Electrical insulation materials. Thermal endurance properties Accelerated determination of relative thermal endurance using analytical test methods (RTE<sub>A</sub>). Instructions for calculations based on activation energy |
| 02/204778 DC : DRAFT JULY 2002 | IEC 61241-0 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| CSA C22.2 No. 0.17 : 2000 : R2013 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| BS EN 60747-5-5 : 2011 | SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS |
| BS IEC/IEEE 60780-323 : 2016 | NUCLEAR FACILITIES - ELECTRICAL EQUIPMENT IMPORTANT TO SAFETY - QUALIFICATION |
| BS EN 60216-6:2006 | Electrical insulating materials. Thermal endurance properties Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method |
| IEC TR 62392:2006 | Suitability of typical electrical insulating material (EIM) for polymer recycling |
| PD 6524:1989 | Guide to specifying permissible temperature and temperature rise for parts of electrical equipment, in particular for terminals |
| I.S. EN 60216-3:2006 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 3: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS |
| ASTM D 2756 : 2007 : R2017 | Standard Test Method for Weight Loss of Electrical Insulating Varnishes |
| IEEE 101 : 1987 | GUIDE FOR THE STATISTICAL ANALYSIS OF THERMAL LIFE TEST DATA |
| I.S. EN 60137:2017 | INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V |
| BIS IS 8504-6 : 2012 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF RELATIVE THERMAL ENDURANCE INDEX (RTE) OF AN INSULATING MATERIAL |
| IEC TS 62332-1:2011 | Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements |
| IEC 60137 REDLINE : 7ED 2017 | INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V |
| NF EN 60216-5 : 2008 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 5: DETERMINATION OF RELATIVE THERMAL ENDURANCE INDEX (RTE) OF AN INSULATING MATERIAL |
| CSA C22.2 No. 0.17 : 2000 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| IEC TS 62332-3:2016 | Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 3: Hermetic motor-compressors |
| 09/30206527 DC : 0 | BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BIS IS/IEC 60079-0 : 2011 | EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| I.S. EN 61212-2:2006 | INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| IEC 60137:2017 RLV | Insulated bushings for alternating voltages above 1000 V |
| ISA 61241-0 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
| BS 2757:1986 | Method for determining the thermal classification of electrical insulation |
| BS 5691-1:1995 | Guide for the determination of thermal endurance properties of electrical insulating materials General guidelines for ageing procedures and evaluation of test results |
| IEC/IEEE 60780-323:2016 | Nuclear facilities - Electrical equipment important to safety - Qualification |
| BS EN 60079-7 : 2015 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015) |
| BS EN 60216-5:2008 | Electrical insulating materials. Thermal endurance properties Determination of relative thermal endurance index (RTE) of an insulating material |
| UNE-EN 50618:2015 | Electric cables for photovoltaic systems |
| BS EN 50618:2014 | Electric cables for photovoltaic systems (BT(DE/NOT)258) |
| 08/30184920 DC : DRAFT JULY 2008 | BS EN 60034-18-31 - ROTATING ELECTRICAL MACHINES - PART 18-31: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - THERMAL EVALUATION AND CLASSIFICATION OF INSULATION SYSTEMS USED IN ROTATING MACHINES |
| UNE-EN 60137:2011 | Insulated bushings for alternating voltages above 1 000 V |
| 08/30176905 DC : DRAFT JAN 2008 | BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| 14/30278882 DC : 0 | BS EN 60079-7 IEC 60079-7 ED. 5.0 - EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' |
| DD IEC/TS 62332-1:2011 | Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components General requirements |
| ASTM D 2671 : 2013 | Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use |
| 02/207211 DC : DRAFT JULY 2002 | IEC 60085 ED.3.0 - THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION |
| 15/30330425 DC : 0 | BS EN 60370 ED 2.0 - TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING RESINS AND VARNISHES FOR IMPREGNATION PURPOSES - ELECTRIC BREAKDOWN METHODS |
| DWA-M 612:2018 | TEST METHODS OF SAMPLING AND TESTING PULPS TO BE USED IN THE MANUFACTURE OF ELECTRICAL INSULATION |
| 15/30329267 DC : 0 | BS EN 60747-17 - SEMICONDUCTOR DEVICES - PART 17: MAGNETIC AND CAPACITIVE COUPLER FOR BASIC AND REINFORCED ISOLATION |
| BS EN 60684-2:2011 | Flexible insulating sleeving Methods of test |
| NF EN 60216-6 : 2006 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD |
| I.S. EN 60079-7:2015 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' |
| BS EN 60137:2017 | Insulated bushings for alternating voltages above 1000 V |
| CSA E60079.0 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS |
| I.S. EN 60454-2:2007 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| IEEE 98-2002 | IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials |
| IEC TS 62446-3:2017 | Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 3: Photovoltaic modules and plants - Outdoor infrared thermography |
| CEI EN 60747-5-2 : 2002 | DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-2: OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS |
| IEC 60076-12:2008 | Power transformers - Part 12: Loading guide for dry-type power transformers |
| IEC 61241-1-1:1999 | Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus |
| IEC 60216-8:2013 | Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures |
| IEC TS 60216-7-1:2015 | Electrical insulation materials - Thermal endurance properties - Part 7-1: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) - Instructions for calculations based on activation energy |
| UNE-EN 62109-1:2011 | Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements |
| PD IEC/TS 62788-2:2017 | Measurement procedures for materials used in photovoltaic modules Polymeric materials. Frontsheets and backsheets |
| 00/243909 DC : DRAFT AUG 2000 | IEC 61730-1 - PHOTOVOLTAIC MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| BS 223:1985 | Specification for bushings for alternating voltages above 1000 V |
| EN 50281-1-1 : 98 AMD 1 2002 | ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING |
| ASTM D 3377 : 2004 : R2013 | Standard Test Method for Weight Loss of Solventless Varnishes |
| CSA C22.2 No. 62109-1 : 2016 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| 06/30159335 DC : 0 | BS EN 60216-5 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 5: DETERMINATION OF RELATIVE THERMAL ENDURANCE INDEX (RTE) OF AN INSULATING MATERIAL |
| BS EN 60747-5-2:2001 | Discrete semiconductor devices and integrated circuits. Optoelectronic devices Essential ratings and characteristics |
| 09/30198417 DC : DRAFT JAN 2009 | BS EN 60505 - EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
| PD IEC/TS 62332-3:2016 | Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components Hermetic motor-compressors |
| BIS IS 8504-4 : 2013 | ELECTRICAL INSULATING MATERIALS- THERMAL ENDURANCE PROPERTIES - PART 4: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS |
| I.S. EN 60684-2:2011 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011) |
| 14/30304003 DC : 0 | BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
| 11/30246689 DC : 0 | BS EN 60216-8 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES |
| BS EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust General requirements |
| 12/30263544 DC : 0 | BS EN 60216-1 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS |
| BS EN 60505:2011 | Evaluation and qualification of electrical insulation systems |
| DIN ISO 5630-4:2016-10 (Draft) | PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986) |
| IEC 60079-7:2015+AMD1:2017 CSV | Explosive atmospheres - Part 7: Equipment protection by increased safety "e" |
| CEI EN 60216-6 : 2007 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD |
| 15/30249614 DC : 0 | BS IEC/IEEE 60780-323 ED 1.0 - NUCLEAR FACILITIES - ELECTRICAL EQUIPMENT IMPORTANT TO SAFETY - QUALIFICATION |
| PD IEC/TS 62332-2:2014 | Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components Simplified test |
| NF EN 60454-2 : 2013 | PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| 16/30318517 DC : 0 | BS EN 60137 ED. 7.0 - INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V |
| CSA E61347.1 : 2003 : R2013 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| IEC 60079-0:2017 | Explosive atmospheres - Part 0: Equipment - General requirements |
| DIN EN 50021 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N" |
| C22.2 NO. 213-17 | Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations (Binational standard with UL 121201) |
| CSA C22.2 No. 60079-7 : 2016 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' |
| I.S. EN 61241-1:2004 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD" |
| I.S. EN 60216-8:2013 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES (IEC 60216-8:2013 (EQV)) |
| I.S. EN 60216-1:2013 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS (IEC 60216-1:2013 (EQV)) |
| ISA 61241-1 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCLOSURES "TD" |
| BIS IS 8504-1 : 2012 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS |
| BS IEC 62899-201 : 2016 | PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
| ASTM D 3377 : 2004 : R2009 | Standard Test Method for Weight Loss of Solventless Varnishes |
| I.S. EN 60780-323:2017 | NUCLEAR FACILITIES - ELECTRICAL EQUIPMENT IMPORTANT TO SAFETY - QUALIFICATION |
| I.S. EN 60216-6:2004 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 6: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD |
| I.S. EN 60747-5-5:2011 | SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS |
| CEI EN 60505 : 2012 | EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
| BS EN 60216-3-2:1995 | Guide for the determination of thermal endurance properties of electrical insulating materials. Instructions for calculating thermal endurance characteristics Calculations for incomplete data: proof test results up to and including the median time to end-point (equal test groups) |
| NF EN 60674-2 : 98 AMD 1 2002 | SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| CEI EN 60216-1 : 2014 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 1: AGEING PROCEDURES AND EVALUATION OF TEST RESULTS |
| I.S. EN 61241-0:2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| IEC 60034-18-22:2000 | Rotating electrical machines - Part 18-22: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions |
| BS EN ISO 2578:1999 | Plastics. Determination of the time-temperature limits after prolonged exposure to heat |
| IEC 61241-1:2004 | Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD" |
| IEC 60747-5-5:2007+AMD1:2013 CSV | Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers |
| ISO 2578:1993 | Plastics Determination of time-temperature limits after prolonged exposure to heat |
| UL 121201:9ED 2017-09 | Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations |
| UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
| BS EN 62109-1:2010 | Safety of power converters for use in photovoltaic power systems General requirements |
| IEC 60505:2011 | Evaluation and qualification of electrical insulation systems |
| IEC 61212-2:2006 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| IEC 60454-2:2007 | Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
| IEC 60216-6:2006 | Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method |
| IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| IEC TS 62788-2:2017 | Measurement procedures for materials used in photovoltaic modules - Part 2: Polymeric materials - Frontsheets and backsheets |
| IEC 60216-1:2013 | Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
| IEC 60216-3:2006 | Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics |
| IEC 60216-5:2008 | Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material |
| 05/30134569 DC : DRAFT JUN 2005 | IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| IEC 60747-5-2:1997+AMD1:2002 CSV | Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics |
| EN 62109-1 : 2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| EN 50618:2014 | Electric cables for photovoltaic systems |
| EN ISO 11248 : 1999 | Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993) |
| EN ISO 2578 : 1998 | PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT |
| ASTM D 2756 : 2007 | Standard Test Method for Weight Loss of Electrical Insulating Varnishes |
| EN 60780-323 : 2017 | Nuclear facilities - Electrical equipment important to safety - Qualification |
| DD IEC/PAS 60747-17:2011 | Semiconductor devices. Discrete devices Magnetic and capacitive coupler for basic and reinforced isolation |
| BS 5691-3.1:1995 | Guide for the determination of thermal endurance properties of electrical insulating materials. Instructions for calculating thermal endurance characteristics Calculations using mean values of normally distributed complete data |
| 02/205209 DC : DRAFT JULY 2002 | IEC 61241-1 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES 'TD' |
| CEI EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| EN 60216-3:2006 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 3: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS |
| BS EN 60454-2:2007 | Pressure-sensitive adhesive tapes for electrical purposes Methods of test |
| 16/30350588 DC : 0 | BS PD IEC/TS 62446-3 ED 1.0 - PHOTOVOLTAIC (PV) SYSTEMS - REQUIREMENTS FOR TESTING, DOCUMENTATION AND MAINTENANCE - PART 3: OUTDOOR INFRARED THERMOGRAPHY OF PHOTOVOLTAIC MODULES AND PLANTS |
| DIN IEC 60085 : 1993 | THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION |
| CEI EN 60216-5 : 2012 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 5: DETERMINATION OF RELATIVE THERMAL ENDURANCE INDEX (RTE) OF AN INSULATING MATERIAL |
| NF EN 60505 : 2011 | EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
| BS EN 60216-3:2006 | Electrical insulating materials. Thermal endurance properties Instructions for calculating thermal endurance characteristics |
| IEC 60137:2017 | Insulated bushings for alternating voltages above 1000 V |
| CSA E61347.1 :2003 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| CSA E60079.15 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL APPARATUS WITH TYPE OF PROTECTION "n" |
| CEI EN 60216-8 : 2014 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES |
| BIS IS 8504-7 : 2012 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 7: DETERMINATION OF THERMAL ENDURANCE INDICES (TI AND RTE) OF AN INSULATING MATERIAL USING THE FIXED TIME FRAME METHOD |
| IEC 60216-3-1:1990 | Guide for the determination of thermal endurance properties of electrical insulating materials. Part 3: Instructions for calculating thermal endurance characteristics - Section 1: Calculations using mean values of normally distributed complete data |
| CEI EN 60137 : 2009 | INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| IEC PAS 60747-17:2011 | Semiconductor devices - Discrete devices - Part 17: Magnetic and capacitive coupler for basic and reinforced isolation |
| NF EN 60747-5-5 : 2012 AMD 1 2015 | SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS |
| ASTM D 3377 : 2004 : R2018 | Standard Test Method for Weight Loss of Solventless Varnishes |
| UNE-EN 60079-7:2016 | Explosive atmospheres - Part 7: Equipment protection by increased safety "e" |
| EN 60747-5-5:2011/A1:2015 | SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS (IEC 60747-5-5:2007/A1:2013) |
| ISO 11248:1993 | Plastics — Thermosetting moulding materials — Evaluation of short-term performance at elevated temperatures |
| IEC 62109-1:2010 | Safety of power converters for use in photovoltaic power systems - Part 1: General requirements |
| 03/314451 DC : DRAFT SEP 2003 | IEC 62392 TR ED.1 - SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL FOR POLYMER RECYCLING |
| BS EN 61212-2:2006 | Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Methods of test |
| IEC 60079-0:2017 RLV | Explosive atmospheres - Part 0: Equipment - General requirements |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| DIN ISO 5630-4:2017-03 | PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986) |
| EN 60216-8:2013 | Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures |
| EN 60216-5:2008 | Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material |
| EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| OVE/ONORM EN 60216-5 : 2009 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 5: DETERMINATION OF RELATIVE THERMAL ENDURANCE INDEX (RTE) OF AN INSULATING MATERIAL |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| IEC 60216-6:2006 | Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method |
| ISO 1520:2006 | Paints and varnishes Cupping test |
| IEC 60450:2004+AMD1:2007 CSV | Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials |
| IEC 60370:1971 | Test procedure for thermal endurance of insulating varnishes - Electric strength method |
| ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| IEC 60172:2015 | Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| IEC 60216-5:2008 | Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material |
| ISO 527-3:1995 | Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
| IEC 61033:1991 | Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 2759:2014 | Board — Determination of bursting strength |
| IEC 60216-3:2006 | Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics |
$131.91
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English - French
PDF 1 User - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.