IEC 60245-2:1994+AMD1:1997+AMD2:1997 CSV
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
15-11-2021
English - French, French, English
31-03-1998
Gives the test methods specified in all parts of IEC 60245 as far as not laid down in IEC 60811, plus those in Amendment 1 (1997) (Flexing test) and Amendment 2 (1998) (Three pulley flexing test and kink test) This consolidated version consists of the second edition (1994), its amendment 1 (1997) and its amendment 2 (1997). Therefore, no need to order amendments in addition to this publication.
Committee |
TC 20
|
DevelopmentNote |
Former IEC 245 Pt2 (10/2012) Stability Date: 2020. (09/2017)
|
DocumentType |
Standard
|
Pages |
49
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
Supersedes |
Standards | Relationship |
VDE 0282-2 : 2003 | Identical |
DIN VDE 0282-2 : 2003 | Identical |
VDE 0472-603 : 1989 | Similar to |
SANS 6282-1 : 2ED 2007(R2013) | Identical |
DIN VDE 0472-603 : 1989 | Identical |
GOST IEC 60245-2 : 2011 | Identical |
VDE 0472-805 : 1994 | Identical |
NFC 32 102-2 : 1999 AMD 1 2003 | Similar to |
DIN VDE 0472-805 : 1994 | Identical |
GOST R IEC 60245-2 : 2002 | Identical |
DIN VDE 0282-2 : 2003 | Corresponds |
DIN VDE 0472-805 : 1994 | Corresponds |
DIN VDE 0472-603 : 1989 | Corresponds |
CSA E60335.2.55 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-55: PARTICULAR REQUIREMENTS FOR ELECTRICAL APPLIANCES FOR USE WITH AQUARIUMS AND GARDEN PONDS |
14/30289997 DC : 0 | BS EN 62893-1 - CHARGING CABLES FOR ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
ISO/IEC 14543-3-6:2007 | Information technology Home electronic system (HES) architecture Part 3-6: Media and media dependent layers Network based on HES Class 1, twisted pair |
NF EN 50090-5-2 : 2004 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-2: MEDIA AND MEDIA DEPENDENT LAYERS - NETWORK BASED ON HBES CLASS 1, TWISTED PAIR |
BS EN 61851-21:2002 | Electric vehicle conductive charging system Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV | Common specifications for high-voltage switchgear and controlgear standards |
IEC 60335-2-78:2002+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues |
EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
EN 60799:1998 | Electrical accessories - Cord sets and interconnection cord sets |
CSA E598.2.2 : 1998 : INC : UPD 1 : 1998 : R2012 | LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 2: RECESSED LUMINAIRES |
CSA E60335.2.55 : 2005 : R2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-55: PARTICULAR REQUIREMENTS FOR ELECTRICAL APPLIANCES FOR USE WITH AQUARIUMS AND GARDEN PONDS |
CAN/CSA-E598-2-2-98 (R2017) | Luminaires - Part 2: Particular Requirements - Section 2: Recessed Luminaires (Adopted IEC 598-2-2:1996, second edition, including Amendment 1:1997, with Canadian deviations) | Luminaires - Partie 2: Règles particulières - Section 2: Luminaires encastrés (norme CEI 598-2-2:1996 adoptée, deuxième édition, avec l\'amendement 1:1997, avec exigences propres au Canada) |
IEC 62893-3:2017 | Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V |
IEEE DRAFT 525 : D15 2006 | DESIGN AND INSTALLATION OF CABLE SYSTEMS IN SUBSTATIONS |
I.S. EN 61851-1:2011 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
IEC 62930:2017 | Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC |
UNE-EN 61851-1:2012 | Electric vehicle conductive charging system - Part 1: General requirements |
97/703042 DC : DRAFT FEB 1997 | PREN 50275-1 - CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 1: GENERAL CONSIDERATIONS |
EN 61851-21:2002 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply |
IEC 60245-8:1998+AMD1:2003+AMD2:2011 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility |
IEC 60245-4:2011 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables |
IEEE 1048-2003 | IEEE Guide for Protective Grounding of Power Lines |
IEC 61138:2007 | Cables for portable earthing and short-circuiting equipment |
08/30186704 DC : DRAFT JULY 2008 | BS EN 61851-1 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
05/30128938 DC : DRAFT FEB 2005 | IEC 61138 ED.3 - CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT |
14/30313775 DC : 0 | BS EN 62893-3 - CHARGING CABLES FOR ELECTRIC VEHICLES - PART 3: CABLES FOR AC CHARGING ACCORDING TO MODES 1, 2 AND 3 OF IEC 61851-1 |
CSA ISO/IEC 14543-3-6 : 2007 : R2012 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1 |
IEEE 1246-2011 REDLINE | IEEE Guide for Temporary Protective Grounding Systems Used in Substations |
IEC 60245-5:1994 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables |
IEC 61316:1999 | Industrial cable reels |
BS EN 61851-1:2011 | Electric vehicle conductive charging system General requirements |
15/30269927 DC : 0 | BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS |
CSA ISO/IEC 14543-3-6 : 2007 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1 |
CAN/CSA-ISO/IEC 14543-3-6-07 (R2017) | Information Technology - Home Electronic System (HES) Architecture - Part 3-6: Media and Media Dependent Layers - Twisted Pair for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-6:2007, first edition, 2007-01) |
IEC 60245-1:2003+AMD1:2007 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements |
IEC 60335-2-55:2002+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds |
IEC 60245-1:2003+AMD1:2007 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements |
IEC 60332-1:1993 | Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable |
AS/NZS IEC 60245.4:2020 | Rubber insulated cables - Rated voltages up to and including 450/750 V Cords and flexible cables |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
IEC 60811-1-2:1985 | Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods |
IEC 60245-8:1998+AMD1:2003+AMD2:2011 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility |
IEC 60245-4:2011 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables |
IEC 60811-1-1:1993+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.