IEC 60304:1982
Current
The latest, up-to-date edition.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French, English, French
01-01-1982
FOREWORD
PREFACE
1 Scope
2 Object
3 Numerical code for abbreviated designation
Standard colours
Applies to thermoplastic insulation for low-frequency cables and wires. Gives the standard colours to be used.
Committee |
TC 46/SC 46C
|
DevelopmentNote |
Stability Date: 2020. (09/2017)
|
DocumentType |
Standard
|
Pages |
7
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Supersedes |
Standards | Relationship |
BS 6746C:1969 | Similar to |
NEN 3093 : 1989 | Identical |
DIN IEC 60304:1987-01 | Identical |
HD 402 : 200S2 | Identical |
DIN 47002:1987-08 | Identical |
UNE 20631:1985 | Identical |
DIN 47002:1987-08 | Corresponds |
CLC/TS 50430:2005 | Optical fibre cables - Gas pipe cables - Family specification for cables to be installed in high pressure gas pipes |
CEI EN 61375-3-1 : 2013 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) |
BS EN 61481-1:2014 | Live working. Phase comparators Capacitive type to be used for voltages exceeding 1 kV a.c. |
BS 6356-12:1997 | Spraying equipment for crop protection Sprayer nozzles. Colour coding for identification |
BS EN 61196-3:1999 | Radio-frequency cables. Specifications Sectional specification for coaxial cables for local area networks |
06/30148633 DC : DRAFT APR 2006 | EN 60794-3-20 - OPTICAL FIBRE CABLES - PART 3-20: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES |
15/30319951 DC : 0 | BS EN 60794-3-60 - OPTICAL FIBRE CABLES - PART 3-60: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DRINKING WATER PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN / FLOATING INTO DRINK DRINKING WATER PIPES |
07/30172537 DC : 0 | BS EN 60794-5-20 - OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION FOR OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
UNE-EN 50525-1:2012 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements |
12/30259054 DC : DRAFT JAN 2012 | BS EN 60794-2-20 - OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES |
BS EN 60794-1-22:2012 | Optical fibre cables Generic specification. Basic optical cable test procedures. Environmental test methods |
CLC/TS 50429:2005 | Optical fibre cables - Sewer cables - Family specification for cables to be installed in storm and sanitary sewers |
CEI CLC/TS 50430 : 2005 | OPTICAL FIBRE CABLES - GAS PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN HIGH PRESSURE GAS PIPES |
CEI EN 60684-3-151 : 1999 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 151: EXTRUDED PVC/NITRILE RUBBER - GENERAL PURPOSE |
CEI CLC/TS 50431 : 2005 | OPTICAL FIBRE CABLES - DRINKING WATER PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN DRINKING WATER PIPES |
02/205756 DC : DRAFT MAY 2002 | IEC 60794-4. ED 2.0 - OPTICAL FIBRE CABLES - PART 4: SECTIONAL SPECIFICATION - AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES |
BS EN 62952-3:2017 | Power sources for a wireless communication device Generic energy harvesting adapter module |
BS EN 50407-3:2014 | Multi-pair cables used in high bit rate digital access telecommunications networks Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP |
DEFSTAN 61-12(PT25)/4(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 25: CABLES, ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 10 MM[2] CROSS SECTIONAL AREA |
BS IEC 60793-2:1998 | Optical fibres Product specifications |
CEI EN 61067-1 : 1998 | SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES - PART 1: DEFINITIONS, CLASSIFICATION AND GENERAL REQUIREMENTS |
BS EN 50441-3:2006 | Cables for indoor residential telecommunication installations Screened cables. Grade 3 |
UTEC 93 531-13 : 2003 | SCREENED CABLES FOR INDOOR TELECOMMUNICATION INSTALLATIONS, CLASS 2 |
BS EN 187104:2001 | Harmonized system of quality assessment for electronic components. Family specification. Single-mode optical fibre cables to beused as underwater cables for lakes and river crossings, etc |
15/30332693 DC : 0 | BS EN 60794-2 - OPTICAL FIBRE CABLES - PART 2: INDOOR OPTICAL FIBRE CABLES - SECTIONAL SPECIFICATIONS |
UNE-EN 50290-2-1:2010 | Communication cables -- Part 2-1: Common design rules and construction |
DEFSTAN 60-1(PT1)/2(1992) : 1992 | CABLES, FIBRE OPTIC - EQUIPMENT CABLES, FIBRE OPTIC LIMITED FIRE HAZARD FOR MARINE APPLICATIONS |
CEI CLC/TS 50429 : 2005 | OPTICAL FIBRE CABLES - SEWER CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN STORM AND SANITARY SEWERS |
BS EN 60794-4-10:2014 | Optical fibre cables Family specification. Optical ground wires (OPGW) along electrical power lines |
ES 203 408 : 1.1.1 | ENVIRONMENTAL ENGINEERING (EE); COLOUR AND MARKING OF DC CABLE AND CONNECTING DEVICES |
10/30215867 DC : 0 | BS EN 50441-2 - CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: SCREENED CABLES - GRADE 2 |
08/30184169 DC : DRAFT JUNE 2008 | BS EN 61243-3 - LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
CEI EN 50288-1 : 2014 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
BS EN 60684-1:2003 | Flexible insulating sleeving Definitions and general requirements |
CEI EN 50407-1 : 2006 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 1: OUTDOOR CABLES |
CSA C60044-8 : 2007 : R2016 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
VDE 0816-2 : 1988 | EXTERNAL CABLES FOR TELECOMMUNICATION AND DATA PROCESSING SYSTEMS; SIGNAL AND MEASURING CABLES, MINING CABLES |
I.S. EN 60794-5-10:2014 | OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
I.S. EN 60793-2:2016 | OPTICAL FIBRES - PART 2: PRODUCT SPECIFICATIONS - GENERAL |
IEC 60189-2:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations |
I.S. EN 60794-5:2016 | OPTICAL FIBRE CABLES - PART 5: SECTIONAL SPECIFICATION - MICRODUCT CABLING FOR INSTALLATION BY BLOWING |
I.S. EN 60794-3-70:2016 | OPTICAL FIBRE CABLES - PART 3-70: OUTDOOR CABLES - FAMILY SPECIFICATION FOR OUTDOOR OPTICAL FIBRE CABLES FOR RAPID/MULTIPLE DEPLOYMENT |
I.S. EN 50441-4:2012 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 4: CABLES UP TO 1200 MHZ - GRADE 3 |
IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
NF EN 60794-2-10 : 2011 | OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES |
CEI EN 60794-4-20 : 2013 | OPTICAL FIBRE CABLES - PART 4-20: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR ADSS (ALL DIELECTRIC SELF SUPPORTED) OPTICAL CABLES |
BS EN 60794-4-20:2012 | Optical fibre cables Aerial optical cables along electrical power lines. Family specification for ADSS (All Dielectric Self Supported) optical cables |
CEI EN 50441-2 : 2013 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: SCREENED CABLES - GRADE 1 |
DIN VDE 0816-2 : 1988 | EXTERNAL CABLES FOR TELECOMMUNICATION AND DATA PROCESSING SYSTEMS; SIGNAL AND MEASURING CABLES, MINING CABLES |
UNE-EN 60794-2:2011 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
I.S. CLC TS 50431:2005 | OPTICAL FIBRE CABLES - DRINKING WATER PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN DRINKING WATER PIPES |
BS EN 62026-2:2013 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) Actuator sensor interface (AS-i) |
EN 60794-3-60:2008 | Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes |
EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
EN 60794-2-20:2014 | Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables |
EN 187103:2003 | Family specification - Optical fibre cables for indoor applications |
EN 61243-3:2014/AC:2015 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
EN 50441-3:2006 | Cables for indoor residential telecommunication installations - Part 3: Screened cables - Grade 3 |
EN 60794-5:2016 | Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing |
EN 60794-3-50 : 2008 | OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN GAS PIPES |
EN 50441-4:2012 | Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 3 |
EN 50406-1:2004 | End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables |
EN 50441-1:2012 | Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1 |
EN 50525-1:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements |
EN 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
EN 60794-5-20 : 2014 | Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing |
EN 60684-3-145 to 147:2001 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving |
EN 60794-4:2003 | Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines |
EN 60794-3:2015 | Optical fibre cables - Part 3: Sectional specification - Outdoor cables |
EN 60684-1:2003 | Flexible insulating sleeving - Part 1: Definitions and general requirements |
EN 61481-1:2014 | Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
EN 60794-2-30:2008 | Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables |
EN 60794-2-10:2011 | Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables |
EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
DEFSTAN 60-1(PT3)/2(1996) : 1996 | CABLES, FIBRE OPTIC - PART 3: CABLES, FIBRE OPTIC, (EXTERNAL) FOR TACTICAL FIELD DEPLOYMENT (LAND SYSTEMS) |
DEFSTAN 60-1(PT0)/1(1992) : 1992 | CABLES, FIBRE OPTIC - GENERAL REQUIREMENTS AND TEST METHODS FOR QUALIFICATION APPROVAL AND CAPABILITY APPROVAL |
DEFSTAN 61-12(PT25)/2(1992) : 1992 | WIRES, CORDS AND CABLES ELECTRICAL - METRIC UNITS - PART 25: CABLES ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 2.5 SQ MM CROSS SECTIONAL AREA |
DEFSTAN 61-12(PT18)/4(1995) : 1995 | WIRES, CORDS AND CABLES ELECTRICAL - METRIC UNITS - PART 18: EQUIPMENT WIRES, LIMITED FIRE HAZARD |
DEFSTAN 60-1(PT1)/3(1998) : 1998 CORR 1998 | CABLES, FIBRE OPTIC - PART 1: EQUIPMENT CABLES, FIBRE OPTIC LIMITED FIRE HAZARD FOR MARINE APPLICATIONS |
DEFSTAN 61-12(PT7)/2(1986) : 1986 | WIRES, CORDS, AND CABLES, ELECTRICAL - METRIC UNITS - PART 7: CORDS, ELECTRICAL GENERAL REQUIREMENTS |
DEFSTAN 60-1(PT0)/2(2000) : 2000 | CABLES, FIBRE OPTIC - PART 0: GENERAL REQUIREMENTS AND TEST METHODS |
DEFSTAN 61-12(PT18)/5(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - PART 18: EQUIPMENT WIRES LIMITED FIRE HAZARD |
EN 187200:2001 | Sectional Specification: Optical cables to be used along electrical power lines (OCEPL) |
EN 187104:2001 | Family specification - Single-mode optical fibre cables to be used as underwater cables for lakes and river crossings etc. |
CEI EN 60454-1 : 1997 | SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
BS EN 4708-001:2014 | Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification Technical specification |
BS EN 60794-5-10:2014 | Optical fibre cables Family specification. Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
BS EN 50441-4:2012 | Cables for indoor residential telecommunication installations Cables up to 1 200 MHz. Grade 3 |
BS EN 187200:2001 | Harmonized systems of quality assessment for electronic components. Sectional specificaton. Optical cables to be used along electrical power lines (OCEPL) |
BS EN IEC 60794-1-22:2018 | Optical fibre cables Generic specification. Basic optical cable test procedures. Environmental test methods |
PREN 50288-1 : DRAFT 2011 | MULTI-ELEMENT METALLIC CABLES USE IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
ES 202 319 : 1.1.1 | TRANSMISSION AND MULTIPLEXING (TM); PASSIVE OPTICAL COMPONENTS AND CABLES; OPTICAL FIBRE CABLES TO BE USED FOR PATCHCORD APPLICATIONS FOR SINGLE-MODE OPTICAL FIBRE COMMUNICATION SYSTEMS; COMMON REQUIREMENTS AND CONFORMANCE TESTING |
BS EN 60793-2:2012 | Optical fibres Product specifications. General |
DIN EN 60454-1 : 1997 | SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
07/30163858 DC : 0 | BS EN 60794-3-40 - OPTICAL FIBRE CABLES - PART 3-40: OUTDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SEWER CABLES AND CONDUITS FOR INSTALLATION BY BLOWING AND/OR PULLING IN NON-MAN ACCESSIBLE STORM AND SANITARY SEWERS |
UNE-EN 61481-1:2015 | Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
NF EN 60794-3 : 2015 | OPTICAL FIBRE CABLES - PART 3: SECTIONAL SPECIFICATION - OUTDOOR CABLES |
03/309905 DC : DRAFT JUNE 2003 | IEC 60794-3-50 ED.1 - MICRO-CABLES, FIBRE UNITS AND MINI-TUBE SYSTEMS FOR INSTALLATION BY BLOWING TECHNIQUES |
03/311609 DC : DRAFT AUG 2003 | IEC 62255-3 ED.1.0 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR BROADBAND DIGITAL COMMUNICATIONS (HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORK) - OUTSIDE PLANT CABLES - PART 3: SECTIONAL SPECIFICATION FOR FILLED CABLES |
BS EN 60708:2005 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
15/30319947 DC : 0 | BS EN 60794-3-50 - OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN/INTO GAS PIPES |
05/30128543 DC : DRAFT JAN 2005 | IEC 60794-3-11 - OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES - DETAILED SPECIFICATION |
04/30117159 DC : DRAFT JUL 2004 | EN 50441-2 - SCREENED CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: GRADE 2 |
13/30267621 DC : 0 | BS EN 61481-1 ED 1.0 - LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
BS EN 50406-1:2004 | End user multi-pair cables used in high bit rate telecommunication networks Aerial cables |
13/30286065 DC : 0 | BS EN 60794-5 - OPTICAL FIBRE CABLES - PART 5: SECTIONAL SPECIFICATION - MICRODUCT CABLING FOR INSTALLATION BY BLOWING |
BS EN 60794-2-20:2014 | Optical fibre cables Indoor cables. Family specification for multi-fibre optical cables |
DEFSTAN 61-12(PT18)/2(1985) : 1985 CORR | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS PT 18 EQUIPMENT WIRES, LIMITED FIRE HAZARD |
DEFSTAN 61-12(PT25)/5(2010) : 2010 | WIRES, CORDS AND CABLES ELECTRICAL - PART 25: WIRES AND CABLES ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 10MM[2] CROSS SECTIONAL AREA |
14/30310002 DC : 0 | BS EN 60794-3-20 - OPTICAL FIBRE CABLES - PART 3-20: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES |
BS EN 187105:2002 | Single mode optical cable (duct/direct buried installation) |
NF EN 187105 : 2002 | SINGLE-MODE OPTICAL FIBRE CABLE (DUCT/DIRECT BURIED INSTALLATION) |
17/30350080 DC : 0 | BS EN 50441-5 - CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 5: CABLES UP TO 2200 MHZ FOR ONE PAIR AND REMAINING PAIRS UP TO 1000 MHZ |
CEI EN 50441-3 : 2006 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 3: SCREENED CABLES - GRADE 3 |
BS EN 60794-2-10:2011 | Optical fibre cables Indoor optical fibre cables. Family specification for simplex and duplex cables |
00/246334 DC : DRAFT DEC 2000 | IEC 61156-6 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 6: SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS WITH TRANSMISSION CHARACTERISTICS UP TO 600 MHZ - WORK AREA WIRING - SECTIONAL SPECIFICATION |
CEI EN 60794-3-60 : 2010 | OPTICAL FIBRE CABLES - PART 3-60: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DRINKING WATER PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING/FLOATING IN DRINKING WATER PIPES |
06/30153348 DC : DRAFT JULY 2006 | |
BS EN 61067-1:1997 | Glass and glass polyester fibre woven tapes Definitions, classification and general requirements |
BS EN 60684-3-145 to 147:2001 | Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Extruded PTFE sleeving |
IEC 62255-2:2005 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2: Unfilled cables - Sectional specification |
I.S. EN 50525-1:2011 | ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 1: GENERAL REQUIREMENTS |
IEC 61156-3:2008 | Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification |
PREN 50407-2 : DRAFT 2012 | MULTI-PAIR CABLES USED IN HIGH BITE RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 2: INDOOR MULTI-PAIR/QUAD CABLES FOR INSTALLATION IN MULTI DWELLING UNITS SHAFT SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBITS OVER IP |
CEI EN 60794-2-30 : 2010 | OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES |
CSA C60044-8 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
NF EN 60684-1 : 2003 | FLEXIBLE INSULATING SLEEVING - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
CEI EN 60794-3-11 : 2012 | OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT, DIRECTLY BURIED AND LASHED AERIAL SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
IEC 61156-5:2009+AMD1:2012 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Horizontal floorwiring - Sectional specification |
BS EN 60044-8:2002 | Instrument transformers Electronic current transformers |
BS EN 61243-3:2014 | Live working. Voltage detectors Two-pole low-voltage type |
I.S. EN 62012-1:2002 | MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENTS - PART 1: GENERIC SPECIFICATION |
I.S. CLC TS 50430:2005 | OPTICAL FIBRE CABLES - GAS PIPE CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN HIGH PRESSURE GAS PIPES |
I.S. EN IEC 60794-1-22:2018 | OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS |
I.S. EN 61375-3-1:2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) (IEC 61375-3-1:2012 (EQV)) |
I.S. EN 50441-2:2012 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: SCREENED CABLES - GRADE 1 |
I.S. EN 60794-2:2017 | OPTICAL FIBRE CABLES - PART 2: INDOOR CABLES - SECTIONAL SPECIFICATION |
CEI EN 60708 : 2006 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
IEC 60794-1-22 REDLINE : 2ED 2017 | OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS |
I.S. EN 61067-1:1999 | SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES - PART 1: DEFINITIONS, CLASSIFICATION AND GENERAL REQUIREMENTS |
UNE-EN 60794-2-30:2011 | Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables |
IEC 62255-4:2005 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4: Aerial drop cables - Sectional specification |
NFC 32 201-1 : 2003 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOPLASTIC INSULATION - PART 1: GENERAL REQUIREMENTS |
IEEE DRAFT 525 : D15 2006 | DESIGN AND INSTALLATION OF CABLE SYSTEMS IN SUBSTATIONS |
EN 60793-2:2016 | Optical fibres - Part 2: Product specifications - General |
IEC 60794-4:2003 | Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines |
IEC 60794-1-1 REDLINE : 4ED 2015 | OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL |
NF EN 62026-2 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) |
UNE-EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
IEC 60684-1:2003 | Flexible insulating sleeving - Part 1: Definitions and general requirements |
ISO 19859:2016 | Gas turbine applications Requirements for power generation |
IEC 60794-5:2014 | Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing |
IEC 61067-1:1991 | Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements |
DIN EN 60684-3-151 : 1999 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING; SHEET 151: EXTRUDED PVC/NITRILE SLEEVING; GENERAL PURPOSE |
VDE 0341-3-151 : 1999 | FLEXIBLE INSULATING SLEEVING - SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING; EXTRUDED PVC/NITRILE SLEEVING; GENERAL PURPOSE |
VDE 0340-1 : 1997 | SPECIFICATION FOR PRESSURE SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
DIN EN 61067-1 : 1998 | SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES - PART 1: DEFINITIONS, CLASSIFICATION AND GENERAL REQUIREMENTS |
VDE 0338-1 : 1998 | SPECIFICATION FOR GLASS AND GLASS POLYESTER FIBRE WOVEN TAPES - DEFINITIONS, CLASSIFICATION AND GENERAL REQUIREMENTS |
PREN 50441-2 : DRAFT 2010 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 2: SCREENED CABLES - GRADE 2 |
UTEC 93 533 : 2009 | CABLES WITH POLYVINYL CHLORIDE INSULATION AND POLYVINYL CHLORIDE SHEATH FOR CABLING AND INDOOR INSTALLATION OF TRANSMISSION EQUIPMENTS - GENERIC SPECIFICATION |
08/30178186 DC : DRAFT FEB 2008 | BS EN 60794-5-10 - OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION FOR OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
EN 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
04/30126721 DC : DRAFT DEC 2004 | IEC 60189-2 ED.4 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 2: CABLES IN PAIRS, TRIPLES, QUADS AND QUINTUPLES FOR INSIDE INSTALLATIONS |
I.S. EN 50288-1:2013 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
15/30332072 DC : 0 | BS EN 62952-3 ED. 1.0 - POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 3: ENERGY HARVESTING SPECIFICATION |
CEI EN 62952-3 : 1ED 2018 | POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 3: GENERIC ENERGY HARVESTING ADAPTOR MODULE |
I.S. EN 50441-1:2012 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UNSCREENED CABLES - GRADE 1 |
BS EN 60794-3-70:2016 | Optical fibre cables Outdoor cables. Family specification for outdoor optical fibre cables for rapid/multiple deployment |
I.S. EN 62026-2:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) (IEC 62026-2:2008 (MOD)) |
BS EN 60794-2:2017 | Optical fibre cables Indoor cables. Sectional specification |
BS EN 50411-2:2008 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors |
BS EN 60794-3-40:2008 | Optical fibre cables Outdoor cables. Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers |
04/30115140 DC : DRAFT JUN 2004 | IEC 60794-5 - OPTICAL FIBRE CABLES - PART 5: SECTIONAL SPECIFICATION FOR MICRODUCT CABLING FOR INSTALLATION BY BLOWING |
10/30215863 DC : 0 | BS EN 50441-1 - CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UNSCREENED CABLES - GRADE 1 |
BS 6893-1(1987) : 1987 AMD 9073 | FLEXIBLE INSULATING SLEEVING FOR ELECTRICAL PURPOSES - SPECIFICATION FOR GENERAL REQUIREMENTS |
08/30176905 DC : DRAFT JAN 2008 | BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
03/311608 DC : DRAFT AUG 2003 | IEC 62255-2 ED.1.0 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR BROADBAND DIGITAL COMMUNICATIONS (HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORK) - OUTSIDE PLANT CABLES - PART 2: SECTIONAL SPECIFICATION FOR UNFILLED CABLES |
CEI EN 60794-5-20 : 2014 | OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION - OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
BS EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control Generic specification |
02/206871 DC : DRAFT JULY 2002 | PREN 187201 - FAMILY SPECIFICATION - OPTICAL GROUND WIRE |
09/30205454 DC : 0 | BS EN 61375-3-1 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK - PART 3-1: MVB - MULTIPURPOSE VEHICLE BUS |
04/30117162 DC : DRAFT JUL 2004 | EN 50441-3 - SCREENED CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 3: GRADE 3 |
02/209111 DC : DRAFT SEP 2002 | PREN 50288-1 - MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
14/30310028 DC : 0 | BS EN 60794-1-1 - OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL |
I.S. EN 60794-4-10:2014 | OPTICAL FIBRE CABLES - PART 4-10: FAMILY SPECIFICATION - OPTICAL GROUND WIRES (OPGW) ALONG ELECTRICAL POWER LINES |
CEI EN 50406-2 : 2006 | END USER MULTI-PAIR CABLES USED IN HIGH BIT RATE TELECOMMUNICATION NETWORKS - PART 2: DUCT AND BURIED CABLES |
13/30292880 DC : 0 | BS EN 60794-3-70 - OPTICAL FIBRE CABLES - PART 3.70: FAMILY SPECIFICATION FOR OUTDOOR OPTICAL FIBRE CABLES FOR RAPID/MULTIPLE DEPLOYMENT |
BS EN 50441-2:2012 | Cables for indoor residential telecommunication installations Screened cables. Grade 1 |
NF EN 187103 : 2003 | FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS |
BS EN 61375-3-1:2012 | Electronic railway equipment. Train communication network (TCN) Multifunction Vehicle Bus (MVB) |
CEI EN 50411-2 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS |
BS EN 60684-2:2011 | Flexible insulating sleeving Methods of test |
PREN 50441-5 : DRAFT 2017 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 5: CABLES UP TO 2200 MHZ FOR ONE PAIR AND REMAINING PAIRS UP TO 1000 MHZ |
05/30131385 DC : DRAFT MAR 2005 | IEC 61156-1 ED 3 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 1: GENERIC SPECIFICATION |
07/30164159 DC : 0 | BS EN 60794-2-30 - OPTICAL FIBRE CABLES - PART 2-30: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES |
04/30117156 DC : DRAFT JUL 2004 | EN 50441-1 - UN-SCREENED CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: GRADE 1 |
BS EN 60794-3-60:2008 | Optical fibre cables Outdoor cables. Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes |
NF EN 60044-8 : 2006 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSDUCERS |
CSA C60044-8 :2007 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
IEC 62952-3:2017 | Power sources for a wireless communication device - Part 3: Generic energy harvesting adapter module |
I.S. EN 50441-3:2006 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 3: SCREENED CABLES - GRADE 3 |
I.S. EN 60794-1-1:2016 | OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL |
I.S. EN 60684-1:2003 | FLEXIBLE INSULATING SLEEVING - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
I.S. EN 60794-3:2002 | OPTICAL FIBRE CABLES - PART 3: SECTIONAL SPECIFICATION - OUTDOOR CABLES |
I.S. EN 60794-2-10:2011 | OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES (IEC 60794-2-10:2011 (EQV)) |
I.S. EN 60794-5-20:2014 | OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION - OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
DEFSTAN 61-12(PT18)/3(1990) : 1990 AMD 3 1993 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS, EQUIPMENT WIRES, LIMITED FIRE HAZARD |
CEI EN 60794-2-10 : 2012 | OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES |
I.S. EN 60794-2-20:2014 | OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL CABLES |
VDE 0816-3 : 1988 COR 2 2010 | Corrigendum to DIN VDE 0816-3 (VDE 0816-3):1988-02 |
DIN VDE 0816-3 : 1988 COR 2 2010 | EXTERNAL CABLES FOR TELECOMMUNICATION AND DATA PROCESSING SYSTEMS; PAPER INSULATED CABLES |
IEC PAS 62255-1:2001 | Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables |
CEI EN 50441-1 : 2013 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UNSCREENED CABLES - GRADE 1 |
UNI EN 4708-001 : 2014 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION |
PREN 50441-1 : DRAFT 2010 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UNSCREENED CABLES - GRADE 1 |
I.S. EN 60794-3-40:2008 | OPTICAL FIBRE CABLES - PART 3-40: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SEWER CABLES AND CONDUITS FOR INSTALLATION BY BLOWING AND/OR PULLING IN NON-MAN ACCESSIBLE STORM AND SANITARY SEWERS |
IEC 60189-3:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples |
BIS IS 14493-7 : 2012(R2015) | MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS - PART 7: SYMMETRICAL PAIR CABLES WITH TRANSMISSION CHARACTERISTICS UP TO 1200 MHZ - SECTIONAL SPECIFICATION FOR DIGITAL AND ANALOG COMMUNICATION CABLES |
EN 60454-1:1994 | Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements |
IEC 62255-3:2005 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3: Filled cables - Sectional specification |
IEC 62255-5:2005 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5: Filled drop cables - Sectional specification |
IEC 61156-7:2003+AMD1:2012 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmissioncharacteristics up to 1 200 MHz - Sectional specification fordigital and analog communication cables |
IEC 62255-1:2003 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification |
IEC 60454-1:1992 | Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements |
NF EN 50441-1 : 2006 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 1: UN-SCREENED CABLES - GRADE 1 |
IEC 60794-2-10:2011 | Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables |
IEC 60684-3-151:1998 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose |
IEC 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
CEI EN 62026-2 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) |
IEC 60794-1-1:2015 RLV | Optical fibre cables - Part 1-1: Generic specification - General |
BS 7810-1:1995 | Specification for glass and glass polyester fibre woven tapes Definitions, classification and general requirements |
CEI EN 60044-8 : 2004 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS |
EN IEC 60794-1-22:2018 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
11/30255235 DC : 0 | BS EN 50288-1 - MULTI-ELEMENT METALIC CABLES USED IN ANALOUGE AND DIGITAL COMUNICATION AND CONTROL - PART 1: GENEIC SPECIFICATION |
NF EN 60684 3-151 : 1998 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 151: EXTRUDED PVC/NITRILE RUBBER - GENERAL PURPOSE |
I.S. EN 60684-2:2011 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011) |
00/201245 DC : DRAFT FEB 2000 | IEC 62029-1 - COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS - PART 1: GENERIC SPECIFICATION AND TEST METHODS |
BS EN 60684-3-151:1998 | Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Extruded PVC/nitrile rubber. General purpose |
09/30205446 DC : 0 | BS EN 61375-2-1 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK - PART 2-1: WTB - WIRE TRAIN BUS |
04/30126724 DC : DRAFT DEC 2004 | IEC 60189-3 ED.4 - LOW-FREQUENCY CABLES AND WIRES WITH PVC INSULATION AND PVC SHEATH - PART 3: EQUIPMENT WIRES WITH SOLID OR STRANDED CONDUCTOR, PVC INSULATED, IN SINGLES, PAIRS AND TRIPLES |
CEI EN 60794-3-40 : 2010 | OPTICAL FIBRE CABLES - PART 3-40: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SEWER CABLES AND CONDUITS FOR INSTALLATION BY BLOWING AND/OR PULLING IN NON-MAN ACCESSIBLE STORM AND SANITARY SEWERS |
UNE-EN 60794-5:2012 | Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing |
10/30230826 DC : DRAFT JULY 2010 | BS EN 60793-2 - OPTICAL FIBRES - PART 2: PRODUCT SPECIFICATIONS - GENERAL |
03/316192 DC : DRAFT SEP 2003 | IEC 60708-1 ED 2 - LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH - PART 1: GENERAL DESIGN DETAILS AND REQUIREMENTS |
14/30310858 DC : 0 | BS EN 60794-4-20 - OPTICAL FIBRE CABLES - PART 4-20: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR ADSS (ALL DIELECTRIC SELF SUPPORTED) OPTICAL CABLES |
07/30170352 DC : DRAFT AUG 2007 | BS EN 50411-2 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES AND MICRODUCT CONNECTORS |
08/30188764 DC : 0 | BS EN 50525-1 - ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - CABLES FOR GENERAL APPLICATIONS |
BS EN 60794-3-50:2008 | Optical fibre cables Outdoor cables. Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes |
BS EN 50406-2:2004 | End user multi-pair cables used in high bit rate telecommunication networks Duct and buried cables |
BS EN 60794-3-11:2010 | Optical fibre cables Outdoor cables. Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables |
BS 6893-2:1987 | Flexible insulating sleeving for electrical purposes Methods of test |
BS EN 60794-2-30:2008 | Optical fibre cables Indoor cables. Family specification for ribbon cables |
CEI EN 62012-1 : 2003 | MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS TO BE USED IN HARSH ENVIRONMENT - PART 1: GENERIC SPECIFICATION |
BS EN 50290-2-1:2005 | Communication cables Common design rules and construction |
16/30338646 DC : 0 | BS EN 60794-1-31 - OPTICAL FIBRE CABLES - PART 1-31: SECTIONAL SPECIFICATION FOR CABLE ELEMENT - OPTICAL FIBRE RIBBONS |
03/311610 DC : DRAFT AUG 2003 | IEC 62255-5 ED.1.0 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR BROADBAND DIGITAL COMMUNICATIONS (HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORK) - OUTSIDE PLANT CABLES - PART 5: SECTIONAL SPECIFICATION FOR FILLED DROP CABLES |
DEFSTAN 61-12(PT33)/2(1994) : 1994 AMD 3 1999 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS, AIRFRAME WIRES AND CABLES IN TEMPERATURE CATEGORIES 135 DEG C, 150 DEG C, 200 DEG C AND 260 DEG C |
12/30260599 DC : 0 | BS EN 50407-2 - MULTI-PAIR CABLES USED IN HIGH BITE RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 2: INDOOR MULTI-PAIR/QUAD CABLES FOR INSTALLATION IN MULTI DWELLING UNITS SHAFT SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBITS OVER IP |
UNE-EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
NF EN 50441-4 : 2017 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 4: CABLES UP TO 1200 MHZ - GRADE 3 |
07/30148629 DC : 0 | BS EN 60794-3-10 - OPTICAL FIBRE CABLES - PART 3-10: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES |
PREN 4708-001 : DRAFT 2017 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION |
03/313880 DC : DRAFT SEP 2003 | IEC 62255-4 ED.1.0 - MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR BROADBAND DIGITAL COMMUNICATIONS (HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORK) - OUTSIDE PLANT CABLES - PART 4: SECTIONAL SPECIFICATION FOR AERIAL DROP CABLES |
PREN 4840-001 : DRAFT 2016 | AEROSPACE SERIES - HEAT SHRINKABLE MOULDED SHAPES - PART 001: TECHNICAL SPECIFICATION |
NFF 61 014 : 1998 | RAILWAY ROLLING STOCK - ELECTRICAL CONNECTING OF BRAIDED WIRE AND SHIELDED CABLE |
UTEC 93 531-15 : 2008 | INDOOR COMMUNICATION SCREENED CABLE - SCREENED CABLES FOR INDOOR COMMUNICATIONS - RADIOFREQUENCY TELEVISION APPLICATIONS INCLUDING SATELLITE INTERMEDIATE BAND |
NFC 93 533 : 94 AMD 1 96 XP | ELECTRONIC COMPONENTS - CABLES WITH PVC INSULATION AND PVC SHEATH FOR WIRING AND INDOOR TRANSMISSION EQUIPMENT - GENERIC SPECIFICATION |
IEC PAS 61156-5:2001 | Symmetrical pair/quad cables for digital communications with transmission characteristics up to 600 MHz - Horizontal floor wiring - Sectional specification |
NF EN 60794-3-60 : 2013 | OPTICAL FIBRE CABLES - PART 3-60: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DRINKING WATER PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING/FLOATING IN DRINKING WATER PIPES |
DEFSTAN 61-12(PT33)/1(1992) : INTERIM | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - AIRFRAME WIRES AND CABLES IN TEMPERATURE CATEGORIES 135 DEG C, 150 DEG C, 200 DEG C AND 260 DEG C |
UNE 212002-2:2014 | Low-frequency cables and wires with PVC insulation and PVC sheath. Part 2: Cables in pairs, triples, quads and quintuples for inside installations. |
I.S. EN 60794-4-20:2012 | OPTICAL FIBRE CABLES - PART 4-20: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR ADSS (ALL DIELECTRIC SELF SUPPORTED) OPTICAL CABLES (IEC 60794-4-20:2012 (EQV)) |
I.S. EN 187103:2003 | FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS |
I.S. EN 60794-3-50:2008 | OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN GAS PIPES |
CLC/TS 50431:2005 | Optical fibre cables - Drinking water pipe cables - Family specification for cables to be installed in drinking water pipes |
CEI EN 60794-5-10 : 2014 | OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING |
BS EN 60794-3:2015 | Optical fibre cables Sectional specification. Outdoor cables |
I.S. EN 61243-3:2014 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
CEI EN 50441-4 : 2013 | CABLES FOR INDOOR RESIDENTIAL TELECOMMUNICATION INSTALLATIONS - PART 4: CABLES UP TO 1200 MHZ - GRADE 3 |
CEI EN 60794-3-50 : 2010 | OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN GAS PIPES |
EN 62026-2:2013 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) |
I.S. EN 60794-3-11:2010 | OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT, DIRECTLY BURIED AND LASHED AERIAL SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
I.S. EN 60454-1:1995 | SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
I.S. EN 50411-2:2008 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS |
IEC 60794-1-22:2017 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
IEC 61156-8:2009+AMD1:2013 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz - Work area wiring - Sectional specification |
IEC PAS 61156-6:2001 | Symmetrical pair/quad cables for digital communications with transmission characteristics up to 600 MHz - Work area wiring - Sectional specification |
IEC 61156-4:2009 | Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification |
IEC 62026-2:2008 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) |
IEC 61156-2:2010 | Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification |
IEC 61375-3-1:2012 | Electronic railway equipment - Train communication network (TCN) - Part 3-1: Multifunction Vehicle Bus (MVB) |
IEC 60794-3-70:2016 | Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment |
IEC 60794-3-60:2008 | Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes |
IEC 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification |
IEC 60794-4-10:2014 | Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines |
IEC 60794-3-40:2008 | Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers |
IEC 60794-5-20:2014 | Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing |
IEC 60794-2-20:2013 | Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables |
IEC 60794-3:2014 | Optical fibre cables - Part 3: Outdoor cables - Sectional specification |
IEC 60794-5-10:2014 | Optical fibre cables - Part 5-10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
IEC 60708:2005 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
IEC 60793-2:2015 | Optical fibres - Part 2: Product specifications - General |
BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
IEC 60794-3-50:2008 | Optical fibre cables - Part 3-50: Outdoor cables - Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes |
IEC 61243-3:2014 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
UNE-EN 61243-3:2015 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
EN 60794-4-10:2014 | Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines |
EN 50441-2:2012 | Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 1 |
EN 4708-001:2014 | Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 001: Technical specification |
BS EN 187103:2003 | Harmonized system of quality assessment for electronic components. Family specification. Optical fibre cables for indoor applications |
16/30344964 DC : 0 | BS EN 4708-001 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION |
DEFSTAN 61-12(PT34)SEC1/1(1992) : 1992 | WIRES, CORDS, AND CABLES, ELECTRICAL - METRIC UNITS - PART 34: RIBBON CABLES - SECTION 1: RIBBON CABLES, 1.27 MM PITCH SUITABLE FOR INSULATION DISPLACEMENT CONNECTOR (IDC) TERMINATION SECTIONAL SPECIFICATION |
BS EN 60794-5:2016 | Optical fibre cables Sectional specification. Microduct cabling for installation by blowing |
CEI EN 187103 : 2003 | FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS |
CEI EN 60684-1 : 2003 | FLEXIBLE INSULATING SLEEVING - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS |
15/30320892 DC : 0 | BS EN 60794-4 - OPTICAL FIBRE CABLES - PART 4: SECTIONAL SPECIFICATION - AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES |
BS 7630:1993 | Generic specification for symmetric pair/quad and multicore cables for digital communication |
UNE-EN 60794-1-22:2015 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
CEI EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
CEI EN 60794-1-22 : 2013 | OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS |
13/30286069 DC : 0 | BS EN 60794-3 - OPTICAL FIBRE CABLES - PART 3: SECTIONAL SPECIFICATION - DOOR CABLES |
03/308375 DC : DRAFT JUNE 2003 | IEC 61196-1 - COAXIAL COMMUNICATION CABLES - PART 1: GENERIC SPECIFICATION - GENERAL, DEFINITIONS AND REQUIREMENTS |
BS EN 50525-1:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) General requirements |
EN 60794-3-70:2016 | Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment |
BS DD IEC PAS 62255-1 : 2001 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATION NETWORKS - PART 1: OUTDOOR CABLES |
09/30197559 DC : 0 | BS EN 60794-3-11 ED.2 - OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT AND DIRECTLY BURIED SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
07/30163862 DC : 0 | BS EN 60794-3-50 - OPTICAL FIBRE CABLES - PART 3-50: OUTDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR GAS PIPE CABLES AND SUB-DUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING IN/INTO GAS PIPES |
13/30292534 DC : 0 | BS EN 60794-4-10 ED 2.0 - OPTICAL FIBRE CABLES - PART 4-10: FAMILY SPECIFICATION - OPGW (OPTICAL GROUND WIRES) ALONG ELECTRICAL POWER LINES |
NF EN 60684 3 145 TO 147 : 2002 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEETS 145 TO 147: EXTRUDED PTFE SLEEVING |
NF EN 60794-3-40 : 2015 | OPTICAL FIBRE CABLES - PART 3-40: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SEWER CABLES AND CONDUITS FOR INSTALLATION BY BLOWING AND/OR PULLING IN NON-MAN ACCESSIBLE STORM AND SANITARY SEWERS |
BS EN 60794-5-20:2014 | Optical fibre cables Family specification. Outdoor microduct fibre units, microducts and protected microducts for installation by blowing |
I.S. EN 60684-3-151:1999 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 151: EXTRUDED PVC/NITRILE RUBBER - GENERAL PURPOSE |
14/30310016 DC : 0 | BS EN 60793-2 - OPTICAL FIBRES - PART 2: PRODUCT SPECIFICATIONS - GENERAL |
CEI EN 60794-2-20 : 2014 | OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL CABLES |
BS EN 60794-4:2003 | Optical fibre cables Sectional specification. Aerial optical cables along electrical power lines |
I.S. EN 50407-3:2014 | MULTI-PAIR CABLES USED IN HIGH BIT RATE DIGITAL ACCESS TELECOMMUNICATIONS NETWORKS - PART 3: INDOOR MULTI-PAIR/QUAD RISER CABLES UP TO 100 MHZ FOR MAXIMUM LENGTH OF CONNECTION 100 M SUPPORTING UNIVERSAL SERVICES, XDSL AND APPLICATIONS UP TO 100 MBIT/S OVER IP |
05/30133337 DC : DRAFT MAY 2005 | IEC 61375-1 - ELECTRIC RAILWAY EQUIPMENT - TRAIN BUS - PART 1: TRAIN COMMUNICATION NETWORK |
NF EN 60794-4-10 : 2007 | OPTICAL FIBRE CABLES - PART 4-10: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR OPGW (OPTICAL GROUND WIRES) |
BS EN 50407-1:2004 | Multi-pair cables used in high bit rate digital access telecommunication networks Outdoor cables |
02/207659 DC : DRAFT JULY 2002 | PREN 50290-2-1 - COMMUNICATION CABLES - PART 2-1: COMMON DESIGN RULES AND CONSTRUCTION |
BS EN 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Generic specification |
I.S. EN 60794-4:2003 | OPTICAL FIBRE CABLES - PART 4: SECTIONAL SPECIFICATION - AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES |
NF EN 60794-4 : 2004 | OPTICAL FIBER CABLES - PART 4: SECTIONAL SPECIFICATION - AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES |
CEI EN 50525-1 : 2011 | ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 1: GENERAL REQUIREMENTS |
DEFSTAN 60-1(PT2)/2(1992) : 1992 | CABLES, FIBRE OPTIC - CABLES, FIBRE OPTIC LIMITED FIRE HAZARD FOR MARINE APPLICATIONS - SECTIONAL SPECIFICATION |
BS EN 50441-1:2012 | Cables for indoor residential telecommunication installations Unscreened cables. Grade 1 |
I.S. 201-1:2001 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 1: GENERAL REQUIREMENTS |
I.S. EN 60044-8:2002 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
I.S. EN 60708:2005 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
I.S. EN 62952-3:2017 | POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 3: GENERIC ENERGY HARVESTING ADAPTOR MODULE |
I.S. EN 61481-1:2014 | LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
CEI EN 60794-2 : 2003 | OPTICAL FIBRE CABLES - PART 2: INDOOR CABLES - SECTIONAL SPECIFICATION |
CEI EN 60794-5 : 2008 | OPTICAL FIBRE CABLES - PART 5: SECTIONAL SPECIFICATION - MICRODUCT CABLING FOR INSTALLATION BY BLOWING |
BS EN 60794-1-1:2016 | Optical fibre cables Generic specification. General |
I.S. EN 60794-2-30:2008 | OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES |
I.S. EN 60794-1-22:2012 | OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS (IEC 60794-1-22:2012 (EQV)) |
I.S. EN 4708-001:2014 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION |
UTEC 93 526 : 2004 | CABLES WITH POLYOLEFIN INSULATION AND POLYOLEFIN SHEATH FOR LOCAL AREA TELECOMMUNICATION NETWORKS - GENERIC SPECIFICATION |
DEFSTAN 61-12(PT25)/3(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 25: CABLES, ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 2.5 MM[2] CROSS SECTIONAL AREA |
NF EN 60794-2-30 : 2015 | OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES |
UTEC 93 530 : 2005 | ELECTRONIC COMPONENTS - CABLES WITH SYMMETRICAL CIRCUITS FOR HIGH FREQUENCY TRANSMISSION - GENERIC SPECIFICATION |
I.S. EN 50290-2-1:2005 | COMMUNICATION CABLES - PART 2-1: COMMON DESIGN RULES AND CONSTRUCTION |
I.S. CLC TS 50429:2005 | OPTICAL FIBRE CABLES - SEWER CABLES - FAMILY SPECIFICATION FOR CABLES TO BE INSTALLED IN STORM AND SANITARY SEWERS |
IEC 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
IEC 61156-1:2007+AMD1:2009 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification |
IEC 60794-2-30:2008 | Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables |
I.S. EN 61196-3:1999 | RADIO FREQUENCY CABLES - PART 3: SECTIONAL SPECIFICATION FOR COAXIAL CABLES FOR LOCAL AREA NETWORKS |
I.S. EN 60794-3-60:2008 | OPTICAL FIBRE CABLES - PART 3-60: OUTDOOR CABLES - FAMILY SPECIFICATION FOR DRINKING WATER PIPE CABLES AND SUBDUCTS FOR INSTALLATION BY BLOWING AND/OR PULLING/DRAGGING/FLOATING IN DRINKING WATER PIPES |
IEC 61196-3:1998 | Radio frequency cables - Part 3: Sectional specification for coaxial cables for use in local area networks |
IEC 60794-1-1:2015 | Optical fibre cables - Part 1-1: Generic specification - General |
14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
06/30148719 DC : DRAFT APR 2006 | IEC 62026-2 ED.2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (C DIS) - PART 2: ACTUATOR SENSOR INTERFACE (AS-I) |
IEC 60794-3-11:2010 | Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables |
EN 50407-1:2004 | Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables |
IEC 60794-1-22:2017 RLV | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
EN 60794-3-40:2008 | Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers |
EN 50411-2:2008 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2: General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors |
EN 60794-3-11:2010 | Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables |
EN 187105:2002 | Single mode optical cable (duct/direct buried installation) |
EN 62012-1:2002 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification |
EN 61067-1:1997 | Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements |
EN 60794-5-10:2014 | Optical fibre cables - Part 5–10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
EN 60684-3-151:1998 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose |
EN 60708:2005/AC:2016-08 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
EN 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
EN 61196-3:1998 | Radio frequency cables - Part 3: Sectional specification for coaxial cables for local area networks |
EN 62952-3:2017 | Power sources for a wireless communication device - Part 3: Generic energy harvesting adaptor module |
EN 50406-2:2004 | End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables |
EN 61375-3-1 : 2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-1: MULTIFUNCTION VEHICLE BUS (MVB) (IEC 61375-3-1:2012) |
EN 50407-3:2014 | Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP |
EN 50290-2-1:2005 | Communication cables - Part 2-1: Common design rules and construction |
EN 60794-4-20:2012 | OPTICAL FIBRE CABLES - PART 4-20: AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES - FAMILY SPECIFICATION FOR ADSS (ALL DIELECTRIC SELF SUPPORTED) OPTICAL CABLES (IEC 60794-4-20:2012) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.