IEC 60352-1:1997
Current
Current
The latest, up-to-date edition.
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
06-08-1997
Publisher
Foreword
Introduction
1 Scope and Object
2 Normative references
3 Definitions
4 Requirements
4.1 Workmanship
4.2 Tools
4.3 Posts
4.4 Wrapping wires
4.5 Wrapped connections
5 Tests
5.1 Testing
5.2 Type tests
5.3 Test schedules
6 Practical guidance
6.1 Current-carrying capacity
6.2 Tool information
6.3 Post information
6.4 Wire information
6.5 Connection information
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Determines the suitability of wrapped connections under specified mechanical, electrical and atmospheric conditions, and provides a means of comparing test results when the tools used to make the connections are of different design. The contents of the corrigendum of October 1998 have been included in this copy.
| Committee |
TC 48/SC 48B
|
| DevelopmentNote |
Also numbered as BS EN 60352-1. (10/2005) Stability Date: 2017. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
61
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 60352-1:1997 | Identical |
| PN EN 60352-1 : 2002 | Identical |
| DIN EN 60352-1:1998-04 | Identical |
| NF EN 60352-1 : 1998 | Identical |
| SN EN 60352-1 : 1997 | Identical |
| CEI EN 60352-1 : 1998 | Identical |
| UNE-EN 60352-1:2001 | Identical |
| I.S. EN 60352-1:1999 | Identical |
| NEN EN IEC 60352-1 : 1997 | Identical |
| UNE 20681-1:1986 | Identical |
| I.S. EN 60512-16-13:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-13: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16M: UN-WRAPPING, SOLDERLESS WRAPPED CONNECTIONS |
| NF EN 60512-16-13 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-13: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16M: UN-WRAPPING, SOLDERLESS WRAPPED CONNECTIONS |
| BS EN 60603-2:1998 | Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features |
| NF EN 61076 4 100 : 2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES |
| 11/30245576 DC : DRAFT MAR 2011 | BS EN 3155-001 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| 10/30219810 DC : 0 | BS EN 45545-5 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES |
| BS EN 61076-4-101:2001 | Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
| BS EN 60255-27:2014 | Measuring relays and protection equipment Product safety requirements |
| DD CLC/TS 45545-5:2009 | Railway applications. Fire protection on railway vehicles Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
| IEC 60571:2012 | Railway applications - Electronic equipment used on rolling stock |
| 03/100395 DC : DRAFT APR 2003 | EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
| DIN 41612-6:1990-06 | TWO-PART CONNECTORS FOR PRINTED BOARD; GRID 2,54 MM; DIMENSIONS OF TYPES Q, R AND S |
| UNE-EN 50467:2012 | Railway applications - Rolling stock - Electrical connectors, requirements and test methods |
| PREN 3155-001 : 200P5 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 60512-16-11:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-11: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16K: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS |
| CEI EN 50155 : 2008 | RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| I.S. EN 60400:2017 | LAMPHOLDERS FOR TUBULAR FLUORESCENT LAMPS AND STARTERHOLDERS |
| I.S. EN 61076-4-101:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-101: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES, HAVING A BASIC GRID OF 2,0 MM FOR PRINTED BOARDS AND BACKPLANES IN ACCORDANCE WITH IEC 60917 |
| I.S. EN 60352-5:2012-2015-10 | SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012 (EQV)) |
| BS EN 60838-1 : 2017 | MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 60838-1:2016) |
| I.S. EN 50467:2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| BS EN 60238 : 2004 | EDISON SCREW LAMPHOLDERS |
| CEI EN 60512-16-13 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-13: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16M: UNWRAPPING, SOLDERLESS WRAPPED CONNECTIONS |
| BS EN 50155:2017 | Railway applications. Rolling stock. Electronic equipment |
| 16/30282633 DC : 0 | BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| EN 61076-4-108:2002 | Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| EN 61076-4-101:2001 | Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
| EN 60255-27:2014 | Measuring relays and protection equipment - Part 27: Product safety requirements |
| NF EN 60352-5 : 2012 | SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| EN 60603-13:1998 | Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) |
| EN 60838-2-1:1996/A2:2004 | MISCELLANEOUS LAMPHOLDERS - PART 2: PARTICULAR REQUIREMENTS - SECTION 1: LAMPHOLDERS S14 (IEC 60838-2-1:1994/A2:2004) |
| EN 60512-16-11 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-11: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16K: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS |
| EN 61076-4-113:2003 | Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| EN 60512-16-13 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-13: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16M: UN-WRAPPING, SOLDERLESS WRAPPED CONNECTIONS |
| CLC/TS 45545-5:2009 | Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
| BS EN 61076-4:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications Sectional specification. Printed board connectors |
| I.S. EN 61076-4:1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: SECTIONAL SPECIFICATION - PRINTED BOARD CONNECTORS |
| 11/30250287 DC : 0 | BS EN 60255-27 - MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS |
| 03/314417 DC : DRAFT SEP 2003 | IEC 60838-1. ED.4 - MISCELLANEOUS LAMPHOLDERS - PART 1 - GENERAL REQUIREMENTS AND TESTS |
| CEI EN 50467 : 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| BS EN 61076-4-113:2003 | Connectors for electronic equipment Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| PREN 50467 : DRAFT 2009 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 60603-2:1998 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES |
| CEI EN 50343 : 2015 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| NF EN 60400 : 2008 AMD 2 2014 | LAMPHOLDERS FOR TUBULAR FLUORESCENT LAMPS AND STARTERHOLDERS |
| NF EN 61076 4 113 : 2005 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS |
| IEC PAS 61076-3-126:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking |
| I.S. EN 50155:2017-11 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT |
| IEC 60838-1:2016 RLV | Miscellaneous lampholders - Part 1: General requirements and tests |
| DIN VDE 0616-3 : 1992 | LAMPHOLDERS FOR TUBULAR FLUORESCENT LAMPS AND STARTERHOLDERS |
| BS EN 60838-2-1 : 1997 | MISCELLANEOUS LAMPHOLDERS - PART 2: PARTICULAR REQUIREMENTS - SECTION 1: LAMPHOLDERS S14 |
| CEI EN 60352-5 : 2013 | SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| CEI EN 61076-4-100 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES |
| I.S. EN 60238:2004 | EDISON SCREW LAMPHOLDERS (IEC 60238:2004 (EQV)) |
| 11/30247723 DC : 0 | BS IEC 60571 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| EN 60400:2017 | Lampholders for tubular fluorescent lamps and starterholders |
| CEI EN 61076-4 : 1997 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: SECTIONAL SPECIFICATION PRINTED BOARD CONNECTORS |
| BS EN 60512-16-11:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16k. Stripping force, solderless wrapped connections |
| BS EN 60512-16-13:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16m. Un-wrapping, solderless wrapped connections |
| 13/30291353 DC : 0 | BS EN 60838-1 ED 5.0 - MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| CEI EN 61076-4-108 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
| DD CLC/TS 50467:2008 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| 03/100530 DC : DRAFT JUNE 2003 | IEC 61076-3 ED 2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION |
| I.S. EN 61076-4-113:2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS |
| 09/30204447 DC : 0 | BS EN 60352-5 - SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| 07/30169004 DC : 0 | BS EN 60400 - LAMPHOLDERS FOR TUBULAR FLUORESCENT LAMPS AND STARTERHOLDERS |
| BS EN 50343 : 2014 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| BS EN 60603-13:1998 | Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) with free connectors for non-accessible insulation displacement terminations (ID) |
| BS EN 61243-5:2001 | Live working. Voltage detectors Voltage detecting systems (VDS) |
| NF EN 61076 4 101 : 2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-101: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES, HAVING A BASIC GRID OF 2,0 MM FOR PRINTED BOARDS AND BLACKPLANES IN ACCORDANCE WITH IEC 60917 |
| IEC 60131-4:1987 | Lever switches. Part 4: Requirements for miniature toggle switches |
| IEC 60400:2017 | Lampholders for tubular fluorescent lamps and starterholders |
| NF EN 50155 : 2007 | RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| CECC 75101-807 : 1994 | MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRIDOF 2.5 mm - ACCORDING TO IEC 917 (DETAIL SPECIFICATION) |
| CEI EN 60512-16-11 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-11: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16K: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS |
| I.S. EN 61984:2009 | CONNECTORS - SAFETY REQUIREMENTS AND TESTS |
| I.S. CECC 75101-807:1994 | MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRID OF 2.5 MM - (ACCORDING TO IEC 917) (DETAIL SPECIFICATION) |
| IEC 60238:2016+AMD1:2017 CSV | Edison screw lampholders |
| IEC 62103:2003 | Electronic equipment for use in power installations |
| I.S. EN 60838-2-1:1997 | MISCELLANEOUS LAMPHOLDERS - PART 2: PARTICULAR REQUIREMENTS - SECTION 1: LAMPHOLDERS S14 |
| EN 175101-809:2004/corrigendum Jun. 2005 | DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
| IEC 61076-4-113:2002 | Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| IEC 60255-27:2013 | Measuring relays and protection equipment - Part 27: Product safety requirements |
| EN 50155:2017 | Railway applications - Rolling stock - Electronic equipment |
| EN 61076-4:1996 | Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors |
| BS 5772-8:1985 | Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods Connector tests (mechanical) and mechanical tests on contacts and terminations |
| CLC/TS 45545-5:2009 | Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
| CEI EN 61243-5 : 2002 | LIVE WORKING - VOLTAGE DETECTORS - PART 5: VOLTAGE DETECTING SYSTEMS (VDS) |
| BS EN 3155-001:2009 | Aerospace series. Electrical contacts used in elements of connection Technical specification |
| BS EN 60352-5:2012 | Solderless connections Press-in connections. General requirements, test methods and practical guidance |
| BS EN 60603-9:1998 | Connectors for frequencies below 3 MHz for use with printed boards Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) |
| CAN/CSA-C22.2 NO. 60947-7-4:18 | Low-voltage switchgear and controlgear ? Part 7-4: Ancillary equipment ? PCB terminal blocks for copper conductors (Trinational standard with NMX-J-538/7-4-ANCE and UL 60974-7-4) |
| CEI EN 60947-7-4 : 2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PCB TERMINAL BLOCKS FOR COPPER CONDUCTORS |
| 12/30235292 DC : 0 | BS EN 50343 - RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| UNE-EN 60947-7-4:2014 | Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors |
| 11/30206085 DC : 0 | BS EN 60947-7-4 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PRINTED BOARD TERMINAL BLOCKS FOR COPPER CONDUCTORS |
| NF EN 60603-7-4 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ |
| 01/206938 DC : DRAFT OCT 2001 | IEC 60255-27 ED.1.0 - MEASURING RELAYS AND EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT |
| BS EN 61076-4-108:2002 | Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| UNI CEI CLC/TS 45545-5 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES |
| 98/542447 DC : DRAFT JULY 1998 | PREN 45545-5 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES |
| XP PREN 3155-001 : 1993 XP | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| UL 60947-7-4:1ED 2018-04 | Low-Voltage Switchgear and Controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors |
| S.R. CLC/TS 45545-5:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES |
| I.S. EN 3155-001:2016 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| S.R. CLC/TS 50467:2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| CEI EN 60255-27 : 2014 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS |
| BS EN 60947-7-4:2013 | Low-voltage switchgear and controlgear Ancillary equipment. PCB terminal blocks for copper conductors |
| IEC 60238 REDLINE : 9ED 2016 | EDISON SCREW LAMPHOLDERS |
| I.S. EN 50343:2014 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| I.S. EN 60838-1:2017 | MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| IEC 61076-5:2001 | Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality - Sectional specification |
| IEC 60512-8:1993 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations |
| EN 60352-5:2012/AC:2014 | SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012) |
| IEC 61076-4-101:2001 | Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
| BS EN 61984:2009 | Connectors. Safety requirements and tests |
| IEC 61076-4-100:2001 | Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes |
| IEC 61984:2008 | Connectors - Safety requirements and tests |
| IEC 61243-5:1997 | Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) |
| IEC 60512-16-13:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections |
| 05/30128512 DC : DRAFT JAN 2005 | IEC 61984 ED.2 - CONNECTORS - SAFETY REQUIREMENTS AND TESTS |
| IEC 60838-2-1:1994 | Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14 |
| IEC 61076-4-108:2002 | Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| IEC 60947-7-4:2013 | Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors |
| IEC 60603-13:1995 | Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) |
| UNE-EN 60400:2011 | Lampholders for tubular fluorescent lamps and starterholders |
| IEC 60352-5:2012 | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance |
| CLC/TS 50467 : 2008 COR 2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 3155-001:2016 | Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification |
| BS EN 61076-5:2001 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications In-line sockets with assessed quality. Sectional specification |
| 09/30208429 DC : 0 | BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| 13/30294204 DC : 0 | BS EN 60238 - EDISON SCREW LAMPHOLDERS |
| BS EN 175101-802:2000 | Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
| BS EN 50467:2011 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| 03/301473 DC : DRAFT JAN 2003 | IEC 60838-1 ED.4 - MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 175101-809:2004 | Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality |
| I.S. EN 60255-27:2014 | MEASURING RELAYS AND PROTECTION EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS |
| BS EN 61076-4-100:2002 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes |
| NF EN 60238 : 2005 AMD 2 2011 | |
| NF EN 60512-16-11 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-11: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16K: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS |
| IEC 60838-1:2016+AMD1:2017 CSV | Miscellaneous lampholders - Part 1: General requirements and tests |
| IEC 60238:2016 RLV | Edison screw lampholders |
| EN 60838-1:2017/A1:2017 | MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 60838-1:2016/A1:2017) |
| I.S. EN 60947-7-4:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PCB TERMINAL BLOCKS FOR COPPER CONDUCTORS (IEC 60947-7-4:2013 (EQV)) |
| IEC 60838-1 REDLINE : 5ED 2016 | MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| I.S. EN 61076-4-108:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1 |
| I.S. EN 175101-809:2004 | DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2.54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75101-801, WITH ASSESSED QUALITY |
| IEC 62847:2016 | Railway applications - Rolling stock - Electrical connectors - Requirements and test methods |
| IEC 60512-16-11:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections |
| IEC 60603-2:1995 | Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features |
| IEC 61076-4:1995 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors |
| EN 61076-4-100:2001 | Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes |
| EN 61243-5:2001 | Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) |
| EN 60603-2:1998/A1:2005 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES |
| EN 175101-802:1999 | Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
| EN 61984:2009 | Connectors - Safety requirements and tests |
| EN 60238 : 2004 AMD 2 2011 | EDISON SCREW LAMPHOLDERS (IEC 60238:2004/A2:2011) |
| EN 50467 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 50343 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - RULES FOR INSTALLATION OF CABLING |
| EN 60947-7-4 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PCB TERMINAL BLOCKS FOR COPPER CONDUCTORS (IEC 60947-7-4:2013) |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 468:1982 | Surface roughness — Parameters, their values and general rules for specifying requirements |
| ISO 1337:1980 | Wrought coppers (having minimum copper contents of 99,85 %) Chemical composition and forms of wrought products |
| IEC 60979:1989 | Wires for wire wrapping applications |
$405.17
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English - French
PDF 1 User - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
Hardcopy - Spanish
PDF 1 User - Spanish
PDF 3 Users - Spanish
PDF 5 Users - Spanish
PDF 9 Users - Spanish
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.