IEC 60534-1:2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
23-05-2023
English - French
06-01-2005
applies to all types of industrial-process control valves (hereinafter referred to as control valves). This part establishes a partial basic terminology list and provides guidance on the use of all other parts of IEC 60534
Committee |
TC 65/SC 65B
|
DevelopmentNote |
Stability Date: 2017. (09/2017)
|
DocumentType |
Standard
|
Pages |
25
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
JIS B 2005-1:2012 | Identical |
NF EN 60534-1 : 2005 | Identical |
NEN EN IEC 60534-1 : 2005 | Identical |
PN EN 60534-1 : 2005 | Identical |
SAC GB/T 17213.1 : 1998 | Identical |
IS 10189 : Part 1 : 2017 | Identical |
CEI EN 60534-1 : 2005 | Identical |
EN 60534-1:2005 | Identical |
CEI EN IEC 60534-1:2023 | Identical |
UNE-EN 60534-1:2005 | Identical |
NFE 29 312 : 1984 | Similar to |
UNE-EN 60534-1:1999 | Identical |
I.S. EN 60534-1:2005 | Identical |
BS EN 60534-1:2005 | Identical |
NEN 10534-1 : 1993 | Identical |
NFC 46 502 : 1988 | Identical |
DIN IEC 60534-1:1990-08 | Identical |
BS 5793-1(1989) : AMD 7815 | Identical |
DIN EN 60534-1:2005-07 | Identical |
BS EN 61987-23:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of actuators for electronic data exchange |
BS EN 61514-2:2013 | Industrial process control systems Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly |
CEI EN 60534-8-4 : 2016 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW |
I.S. EN 61987-23:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 23: LISTS OF PROPERTIES (LOPS) OF ACTUATORS FOR ELECTRONIC DATA EXCHANGE |
I.S. EN 60534-2-4:2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
NF EN 60534 8-2 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES |
BS 5793-4:1987 | Industrial-process control valves Specification for inspection and routine testing |
06/30157192 DC : 0 | BS EN 736-3 - VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
BS EN 60534-2-1:2011 | Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures Power metering and monitoring devices (PMD) |
BS EN 60534-3-2:2001 | Industrial-process control valves. Dimensions Face-to-face dimensions for rotary control valves except butterfly valves |
14/30295852 DC : 0 | BS EN 60534-2-3 ED. 3.0 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY - TEST PROCEDURES |
CEI EN 60534-9 : 2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS |
BS EN 60534-8-4:2015 | Industrial-process control valves Noise considerations. Prediction of noise generated by hydrodynamic flow |
13/30287720 DC : 0 | BS EN 61987-21 ED 1.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 21: LIST OF PROPERTIES (LOP) OF AUTOMATED VALVES FOR ELECTRONIC DATA EXCHANGE - GENERIC STRUCTURES |
CEI EN 60534-7 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 7: CONTROL VALVE DATA SHEET |
I.S. EN 61987-24-2:2017 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-2: LIST OF PROPERTIES (LOPS) OF VALVE/ACTUATOR ACCESSORIES FOR ELECTRONIC DATA EXCHANGE |
I.S. EN 60534-8-2:2011 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES (IEC 60534-8-2:2011 (EQV)) |
I.S. EN 14382:2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
DIN EN ISO 23553-1:2014-09 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014 |
DIN EN 14382 E : 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
IEC 60534-8-3:2010 | Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method |
BS EN 14382 : 2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
BS EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
BS ISO 6358-3:2014 | Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids Method for calculating steady-state flow-rate characteristics of systems |
DIN EN 736-3:2008-04 | Valves - Terminology - Part 3: Definition of terms |
EN 60534-3-1:2000/corrigendum:2000 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES |
EN 60534-2-5:2003 | Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery |
EN 61987-23:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange |
EN 60534-8-3:2011 | Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method |
EN 1349:2009 | Industrial process control valves |
EN 61987-21:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures |
EN 61514-2:2013 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013) |
BS EN 1349:2009 | Industrial process control valves |
BS 5793-5:1984 | Industrial-process control valves Specification for marking |
BS EN 60534-2-4:2009 | Industrial-process control valves Flow capacity. Inherent flow characteristics and rangeability |
13/30282237 DC : 0 | BS EN 60534-8-4 ED 3.0 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW |
PREN 14382 : DRAFT 2016 | GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
BS EN 60534-7:2010 | Industrial-process control valves Control valve data sheet |
I.S. EN 334:2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
BS EN 61987-24-3:2017 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOPs) of flow modification accessories for electronic data exchange |
04/30117386 DC : DRAFT JUL 2004 | EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
04/30110315 DC : DRAFT MAR 2004 | IEC 60534-9 - INDUSTRIAL PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS |
BS EN 60534-2-3:2016 | Industrial-process control valves Flow capacity. Test procedures |
I.S. EN 61987-22:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 22: LISTS OF PROPERTIES (LOPS) OF VALVE BODY ASSEMBLIES FOR ELECTRONIC DATA EXCHANGE |
UNI EN 334 : 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
CEI EN 60534-2-5 : 2004 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-5: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW THROUGH MULTISTAGE CONTROL VALVES WITH INTERSTAGE RECOVERY |
CEI EN 60534-8-2 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-2: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY HYDRODYNAMIC FLOW THROUGH CONTROL VALVES |
IEC 60534-8-1:2005 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
IEC 60534-3-2:2001 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
I.S. EN 60534-9:2007 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS |
BS EN 60534-8-3:2011 | Industrial-process control valves Noise considerations. Control valve aerodynamic noise prediction method |
BS EN 60534-8-2:2011 | Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by hydrodynamic flow through control valves |
I.S. EN 61987-24-3:2017 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-3: LISTS OF PROPERTIES (LOPS) OF FLOW MODIFICATION ACCESSORIES FOR ELECTRONIC DATA EXCHANGE |
I.S. EN 60534-2-1:2011 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS |
IEC 61987-24-2:2017 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange |
BS EN 334 : 2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
I.S. EN 736-3:2008 | VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
I.S. EN 1349:2009 | INDUSTRIAL PROCESS CONTROL VALVES |
UNI EN 1349 : 2010 | INDUSTRIAL PROCESS CONTROL VALVES |
VDI/VDE 2178:2009-07 | Fluidic characteristic quantities of quarter turn valves and their determination |
I.S. EN 88-2:2007 | PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2: PRESSURE REGULATORS FOR INLET PRESSURES ABOVE 500 MBAR UP TO AND INCLUDING 5 BAR |
VDI/VDE 3844:2014-01 | Industrial process control valves - Actuators for control valves |
VDI/VDE 2176:2007-09 | Fluidic characteristic quantities of vanes and their determination |
VDI 2073 Blatt 2:2012-05 | Hydraulic systems in building services - Hydraulic balancing |
BS 5793-2.2(1981) : AMD 7817 | INDUSTRIAL PROCESS CONTROL VALVES - FLOW CAPACITY - SIZING EQUATIONS FOR COMPRESSIBLE FLUID FLOW UNDER INSTALLED CONDITIONS |
CEI EN 60534-8-3 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-3: NOISE CONSIDERATIONS - CONTROL VALVE AERODYNAMIC NOISE PREDICTION METHOD |
BS EN 61987-24-2:2017 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues List of properties (LOPs) of valve/actuator accessories for electronic data exchange |
BS EN 61987-21:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues List of Properties (LOP) of automated valves for electronic data exchange. Generic structures |
DIN EN 60534-2-4:2009-11 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
BS 5793-2.3(1984) : 1984 AMD 7818 | INDUSTRIAL PROCESS CONTROL VALVES - FLOW CAPACITY - METHODS OF TEST |
BS EN 60534-8-1:2005 | Industrial-process control valves Noise considerations. Laboratory measurement of noise generated by aerodynamic flow through control valves |
I.S. EN 61514-2:2013 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013 (EQV)) |
03/314999 DC : DRAFT SEP 2003 | IEC 60534-4 - INDUSTRIAL PROCESS CONTROL VALVES - PART 4: INSPECTION AND ROUTINE TESTING |
I.S. EN 60534-8-1:2005 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
I.S. EN ISO 23553-1:2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014) |
EN 61987-24-3:2017 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange |
BS EN 60534-5:2004 | Industrial-process control valves Marking |
NF EN 60534 8-1 : 2006 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
CEI EN 60534-2-4 : 2010 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
CEI EN 60534-8-1 : 2006 | VANNES DE REGULATION DES PROCESSUS INDUSTRIELS - PARTIE 8-1: CONSIDERATIONS SUR LE BRUIT - MESURE EN LABORATOIRE DU BRUIT CREE PAR UN DEBIT AERODYNAMIQUE A TRAVERS UNE VANNE DE REGULATION |
DIN EN 334:2016-05 (Draft) | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
I.S. EN 60534-3-1:2000 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES |
DIN EN 14382:2016-05 (Draft) | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
UNE-EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
IEC 61514-2:2013 | Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly |
IEC 60534-2-4:2009 | Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability |
IEC 60534-9:2007 | Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs |
UNI EN 736-3 : 2008 | VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
UNI EN 14382 : 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
UNI EN ISO 23553-1 : 2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
DIN IEC 60534-2-4:1990-11 | INDUSTRIAL-PROCESS CONTROL VALVES; FLOW CAPACITY; INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
BS EN 61987-22:2016 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of valve body assemblies for electronic data exchange |
BS EN 60534-3-3:1998 | Industrial-process control valves Dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
96/201627 DC : DRAFT FEB 1996 | IEC 60534-4:1982 - INDUSTRIAL PROCESS CONTROL VALVES - PART 4: INSPECTION AND ROUTINE TESTING |
BS EN 60534-2-5:2003 | Industrial-process control valves. Flow capacity Sizing equations for fluid flow through multistage control valves with interstage recovery |
16/30334287 DC : 0 | BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
07/30174895 DC : DRAFT DEC 2007 | BS EN 60534-7 ED.2 - INDUSTRIAL-PROCESS CONTROL VALVE - PART 7: CONTROL VALVE DATA SHEET |
15/30323275 DC : 0 | BS EN 61987-24-3 ED 1.0 - MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-3: LIST OF PROPERTIES (LOP) OF FLOW MODIFICATION ACCESSORIES FOR ELECTRONIC DATA EXCHANGE |
NF EN 60534-7 : 2012 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 7: CONTROL VALVE DATA SHEET |
09/30201712 DC : 0 | BS EN 60534-7 - INDUSTRIAL-PROCESS CONTROL VALVE - PART 7: CONTROL VALVE DATA SHEET |
08/30179182 DC : DRAFT MAY 2008 | BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
NF EN 60534-2-4 : 2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
I.S. EN 61987-21:2016 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 21: LIST OF PROPERTIES (LOP) OF AUTOMATED VALVES FOR ELECTRONIC DATA EXCHANGE - GENERIC STRUCTURES |
I.S. EN 60534-7:2010 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 7: CONTROL VALVE DATA SHEET |
I.S. EN 60534-5:2004 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 5: MARKING |
CEI EN 60534-5 : 2005 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 5: MARKING |
EN 61987-24-2:2017 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange |
16/30334290 DC : 0 | BS EN 14382 - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
IEC 61987-24-3:2017 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange |
IEC 60534-8-4:2015 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow |
IEC 60534-8-2:2011 | Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves |
DIN EN 88-2:2008-03 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
IEC 61987-22:2015 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange |
IEC 60534-7:2010 | Industrial-process control valves - Part 7: Control valve data sheet |
IEC 60534-3-1:2000 | Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves |
BS EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves |
ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
12/30250105 DC : 0 | BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012) |
IEC 61987-21:2015 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures |
IEC 60534-2-5:2003 | Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery |
09/30150663 DC : 0 | BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
ISO 6358-3:2014 | Pneumatic fluid power Determination of flow-rate characteristics of components using compressible fluids Part 3: Method for calculating steady-state flow-rate characteristics of systems |
EN 14382:2005+A1:2009/AC:2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
EN 88-2:2007 | Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
DIN EN 60534-2-1:2012-01 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS (IEC 60534-2-1:2011) |
03/321016 DC : DRAFT DEC 2003 | IEC 60534-8-1 ED.2 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-1: NOISE CONSIDERATIONS - LABORATORY MEASUREMENT OF NOISE GENERATED BY AERODYNAMIC FLOW THROUGH CONTROL VALVES |
I.S. EN 60534-8-4:2015 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW |
06/30155498 DC : DRAFT AUG 2006 | ISO 4126-10 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 10: SIZING OF SAFETY VALVES AND CONNECTED INLET AND OUTLET LINES FOR GAS/LIQUID TWO-PHASE FLOW |
CEI EN 60534-3-1 : 2001 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 3-1: DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES |
02/203205 DC : DRAFT FEB 2002 | IEC 61514-2. ED.1 - INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS |
15/30323271 DC : 0 | BS EN 61987-24-2 ED 1.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-2: LIST OF PROPERTIES (LOP) OF VALVE/ACTUATOR ACCESSORIES FOR ELECTRONIC DATA EXCHANGE |
BS EN 60534-2-2:1993 | Industrial-process control valves. Flow capacity Sizing equations for compressible fluid flow under installed conditions |
BS EN 60534-9:2007 | Industrial-process control valves Test procedure for response measurements from step inputs |
09/30201330 DC : 0 | BS EN 60534-8-3 - INDUSTRIAL-PROCESS CONTROL VALVES - PART 8-3: NOISE CONSIDERATIONS CONTROL VALVE AERODYNAMIC NOISE PREDICTION METHOD |
BS 5793-8.1:1986 | Industrial-process control valves. Noise considerations Method for laboratory measurement of noise generated by aerodynamic flow through control valves |
03/300069 DC : DRAFT JAN 2003 | IEC 60534-8-4 ED.2 - INDUSTRIAL PROCESS CONTROL VALVES - PART 8-4: NOISE CONSIDERATIONS - PREDICTION OF NOISE GENERATED BY HYDRODYNAMIC FLOW |
I.S. EN 60534-2-3:2016 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-3: FLOW CAPACITY TEST PROCEDURES |
I.S. EN 60534-2-5:2003 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-5: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW THROUGH MULTISTAGE CONTROL VALVES WITH INTERSTAGE RECOVERY |
BS EN 60534-3-1:2000, IEC 60534-3-1:2000 | INDUSTRIAL-PROCESS CONTROL VALVES - DIMENSIONS - FACE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, STRAIGHT PATTERN AND CENTRE-TO-FACE DIMENSIONS FOR FLANGED, TWO-WAY, GLOBE-TYPE, ANGLE PATTERN CONTROL VALVES |
EN 60534-2-1:2011/AC:2015 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS (IEC 60534-2-1:2011) |
IEC 60534-2-3:2015 | Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
BS EN 736-3:2008 | Valves. Terminology Definition of terms |
IEC 60534-2-1:2011 | Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions |
IEC 60534-5:2004 | Industrial-process control valves - Part 5: Marking |
IEC 60534-3-3:1998 | Industrial-process control valves - Part 3-3: Dimensions End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
IEC 61987-23:2015 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 23: Lists of Properties (LOPs) of actuators for electronic data exchange |
EN 61987-22:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 22: Lists of Properties (LOPs) of valve body assemblies for electronic data exchange |
EN 60534-9 : 2007 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS |
EN 60534-8-1:2005 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
EN 60534-2-3:2016 | Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
EN 60534-2-4 : 2009 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-4: FLOW CAPACITY - INHERENT FLOW CHARACTERISTICS AND RANGEABILITY |
EN 60534-8-4:2015 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow |
EN 60534-5:2004 | Industrial-process control valves - Part 5: Marking |
EN 60534-3-3:1998 | Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
EN 60534-7:2010 | Industrial-process control valves - Part 7: Control valve data sheet |
EN 60534-3-2:2001 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
EN 60534-8-2:2011 | Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves |
ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
EN 61333:1998 | Marking on U and E ferrite cores |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.