IEC 61036:1996+AMD1:2000 CSV

Superseded

View Superseded by

Alternating current static watt-hour meters for active energy (classes 1 and 2)

Amended by

IEC 61036:1996/AMD1:2000

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

28-01-2003

Language(s)

English - French

Published date

29-09-2000

Publisher

International Electrotechnical Committee

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
    3.1 General definitions
    3.2 Definitions related to the functional
          elements
    3.3 Definitions of mechanical elements
    3.4 Definitions of insulations
    3.5 Definitions of meter quantities
    3.6 Definitions of influence quantities
    3.7 Definition of tests
4 Requirements
    4.1 Standard electrical values
    4.2 Mechanical requirements
    4.3 Climatic Conditions
    4.4 Electrical requirements
    4.5 Electromagnetic compatibility (EMC)
    4.6 Accuracy requirements
5 Tests and test conditions
    5.1 General testing procedures
    5.2 Tests of mechanical requirements
    5.3 Tests of climatic influences
    5.4 Tests of electrical requirements
    5.5 Tests for electromagnetic compatibility (EMC)
    5.6 Tests of accuracy requirements
Tables
1 Standard reference voltages
2 Standard reference currents
3a Clearances and creepage distances for insulating
    encased meter of protective class 1
3b Clearances and creepage distances for insulating
    encased meter of protective class II
4 Voltage marking
5 Temperature range
6 Relative humidity
7 Power consumption in voltage circuits including
    the power supply
8 Power consumption in voltage circuits including
    power supply
9 Voltage range
10 Variations due to short-time overcurrents
11 Variations due to self-heating
12 Change of error due to earth fault
13 Percentage error (single-phase meters and
    polyphase meters with balanced loads)
14 Percentage error limits (polyphase meters carrying
    a single-phase load, but with balanced polyphase
    voltages applied to voltage circuits)
15 Influence quantities
16 Temperature coefficient
17 Starting current
18 AC voltage tests
19 Voltage and current balance
20 Reference conditions
21 Interpretation of test results
Annexes
A Relationship between ambient air temaperature
    and relative humidity
B Test circuit diagram for d.c., even harmonics,
    odd harmonics and sub-harmonics
C Voltage waveform for the tests of the effect of
    voltage dips and short interruptions
D Electromagnet for testing the influence of externally
    produced magnetic fields
E Test schedule
F Test circuit diagram for the test of immunity
    to earth fault

Applies only to newly manufactured indoor or outdoor static watt-hour meters of accuracy classes 1 and 2, for the measurement of alternating-current electrical active energy of a frequency in the range 45 Hz to 65 Hz and to their type tests only. Does not apply to watt-hour meters where the voltage across the connection terminals exceeds 600 V, portable meters, data interfaces to the register of the meter. Acceptance tests are partially given in IEC 60514.

Committee	TC 13
DevelopmentNote	Also numbered as BS EN 61036 (08/2002)
DocumentType	Standard
Pages	105
PublisherName	International Electrotechnical Committee
Status	Superseded
SupersededBy	IEC 62052-11:2003+AMD1:2016 CSV IEC 62053-21:2003+AMD1:2016 CSV
Supersedes	IEC 61036:1990

Standards	Relationship
I.S. EN 61036:1997	Identical
SAC GB/T 17215 : 2002	Identical
SN EN 61036 : 1996 AMD 1 2000	Identical
VDE 0418-7 : 2001	Identical
EN 61036:1996/A1:2000	Identical
DIN EN 61036 : 2001	Identical
BS 7400(1991) : 1991 AMD 7672	Identical
NEN EN IEC 61036 : 96 AMD 1 2000	Identical
NEN 11036 : 1996	Identical

BS 8431:2010	Electrical static meters for secondary metering and sub-metering. Specification
BS EN 60687:1993	Specification for alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)
BS EN 61358:1996	Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
I.S. EN 62053-61:1999	ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 61: POWER CONSUMPTION AND VOLTAGE REQUIREMENTS
IEC 60687:1992	Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)
EN 61268:1996	Alternating current static var-hour meters for reactive energy (classes 2 and 3)
EN 61358:1996	Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
EN 60687:1992/corrigendum:1993	ALTERNATING CURRENT STATIC WATT HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2S AND 0.5S)
EN 62053-31 : 1998	Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only)
EN 62053-61:1998	Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements
CEI 13-32 : 2000	WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS
DIN EN 60687 : 1994	ALTERNATING-CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 0.2 S AND 0.5 S)
CEI EN 61851-22 : 2003	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION
CEI EN 61358 : 1997	ACCEPTANCE INSPECTION FOR DIRECT CONNECTED ALTERNATING CURRENTE STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
NF EN 61851-22 : 2002	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: A.C. ELECTRIC VEHICLE CHARGING STATION
VDE 0418-3-31 : 1999	ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 31: PULSE OUTPUT DEVICES FOR ELECTROMECHANICAL AND ELECTRONIC METERS (TWO WIRES ONLY)
DIN EN 62053-61 : 1999	ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 61: POWER CONSUMPTION AND VOLTAGE REQUIREMENTS
VDE 0418-60 : 1996	ACCEPTANCE INSPECTION FOR DIRECT CONNECTED ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
VDE 0418-3-61 : 1999	ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 61: POWER CONSUMPTION AND VOLTAGE REQUIREMENTS
DIN EN 62053-31 : 1999	ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 31: PULSE OUTPUT DEVICES FOR ELECTROMECHANICAL AND ELECTRONIC METERS (TWO WIRES ONLY)
DIN EN 61358 : 1996	ACCEPTANCE INSPECTION FOR DIRECT CONNECTED ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
BS EN 62053-31:1999	Electricity metering equipment (a.c.). Particular requirements Pulse output devices for electromechanical and electronic meters (two wires only)
BS EN 61851-22:2002	Electric vehicle conductive charging system A.C. electric vehicle charging station
IEC 61851-22:2001	Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station
CEI EN 62053-31 : 1999	ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 31: PULSE OUTPUT DEVICES FOR ELECTROMECHANICAL AND ELECTRONIC METERS (TWO WIRES ONLY)
02/203214 DC : DRAFT MAR 2002	IEC 62282-3-2 - FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER PLANTS - TEST METHODS FOR THE PERFORMANCE
I.S. EN 61358:1997	ACCEPTANCE INSPECTION FOR DIRECT CONNECTED ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2)
01/201515 DC : DRAFT APRIL 2001	IEC 60456, ED. 4 CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
CEI EN 62053-61 : 1999	ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 61: POWER CONSUMPTION AND VOLTAGE REQUIREMENTS
DIN EN 61268 : 1996	ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3)
BS EN 61268:1996	Alternating current static var-hour meters for reactive energy (classes 2 and 3)
IEC 62053-61:1998	Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements
IEC 62053-31:1998	Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only)
IEC 61268:1995	Alternating current static var-hour meters for reactive energy (classes 2 and 3)
IEC 61358:1996	Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (Classes 1 and 2)
01/205932 DC : DRAFT AUG 2001	BS 8431 - CODE OF PRACTICE FOR ELECTRICAL STATIC METERING FOR SECONDARY OR SUB-METERING
BS EN 62053-61:1999	Electricity metering equipment (a.c.). Particular requirements Power consumption and voltage requirements
EN 61851-22:2002	Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station

View more information

$943.21

Including GST where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

IEC 61036:1996+AMD1:2000 CSV

Alternating current static watt-hour meters for active energy (classes 1 and 2)

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Category

Subcategory