IEC 61046:1993

Superseded

View Superseded by

D.C. or a.c. supplied electronic step-down convertors for filament lamps - General and safety requirements

Amended by

IEC 61046:1993/AMD1:1995

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

13-10-2000

Published date

11-11-1993

Publisher

International Electrotechnical Committee

Contents
Foreword
Section 1 - General requirements
1. General
1.1 Scope
1.2 Normative references
2. Definitions
3. General requirements
4. General notes on tests
5. Classification
6. Marking
Section 2 - Safety requirements
7. Terminals
8. Provisions for earthing
9. Construction
10. Creepage distances and clearances
11. Protection against accidental contact with live parts
12. Moisture resistance and insulation
13. Electric strength
14. Transformer heating
15 Abnormal conditions
16. Fault conditions
17. Screws, current-carrying parts and connections
18. Resistance to heat and fire
19. Resistance to corrosion
Figure 1
Annexes
A. Test to establish whether a conductive part is a
     live part which may cause an electric shock
B. Particular requirements for d.c. or a.c. supplied
     electronic step-down convertors for filament lamps
     with means of protection against overheating
C. Particular additional requirements for independent
     SELV d.c. or a.c. supplied electronic step-down
     convertors for filament lamps

Specifies general and safety requirements for electronic step-down convertors for use on d.c. supplies up to 250 V or a.c. supplies up to 1 000 V at 50 Hz or 60 Hz.

Committee	TC 34/SC 34C
DevelopmentNote	BS DRAFTS 93/211259 DC AND 94/202328 DC REFER TO AMENDMENT
DocumentType	Standard
Pages	100
PublisherName	International Electrotechnical Committee
Status	Superseded
SupersededBy	IEC 61347-1:2015 RLV IEC 61347-2-2:2011
Supersedes	IEC 61046:1991/AMD1:1991 IEC 61046:1991

Standards	Relationship
NF EN 61046 : 95 AMD 1 96	Identical
GOST R IEC 1046 : 1998	Identical
GOST IEC 61046 : 2012	Identical
NEN 11046 : 94 AMD 1 96	Identical
I.S. EN 61046:1995	Identical
AS/NZS 61046:2001	Identical
VDE 0712-24 : 95 AMD 1 97	Identical
CEI EN 61046 : 2ED 1998	Identical
EN 61046:1994/A1:1996	Corresponds
DIN EN 61046 : 1995 AMD 1 1997	Identical
UNE-EN 61046:1996	Identical

PREN 12665 : DRAFT 2009	LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS
CEI EN 60598-2-6 : 1998	LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 6: LUMINAIRES WITH BUILT-IN TRANSFORMERS FOR FILAMENT LAMPS
VDE 0711-2-23 : 2001	LUMINAIRES - PART 2-23: PARTICULAR REQUIREMENTS - EXTRA LOW-VOLTAGE LIGHTING SYSTEMS FOR FILAMENT LAMPS
10/30217290 DC : DRAFT FEB 2010	BS EN 60364-7-715 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-715: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXTRA-LOW-VOLTAGE LIGHTING INSTALLATIONS
HD 384.7.711 : 200S1	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
I.S. EN 60598-2-6:1995	LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 6: LUMINAIRES WITH BUILT-IN TRANSFORMERS OR CONVERTERS FOR FILAMENT LAMPS
NF EN 60598 2-23 : 97 AMD 1 2001	LUMINARIES - PART 2: PARTICULAR REQUIREMENTS - SECTION 23: EXTRA LOW-VOLTAGE LIGHTING SYSTEMS FOR FILAMENT LAMPS
EN 60598-2-23:1996/A1:2000	LUMINAIRES - PART 2-23: PARTICULAR REQUIREMENTS - EXTRA LOW VOLTAGE LIGHTING SYSTEMS FOR FILAMENT LAMPS
VDE 0711-223 : 1997	LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 23: EXTRA LOW-VOLTAGE LIGHTING SYSTEMS FOR FILAMENT LAMPS
09/30185891 DC : 0	BS EN 12665 - LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS
I.S. HD 384.7.711:2003	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS
CSA E598.1 : 2002	LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
IEC 60364-7-740:2000	Electrical installations of buildings - Part 7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses
I.S. HD 60364-7-740:2006	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
IEC 60598-2-23:1996+AMD1:2000 CSV	Luminaires - Part 2-23: Particular requirements - Extra low voltage lighting systems for filament lamps
BS EN 60598-2-23:1997	Luminaires. Particular requirements Extra low voltage lighting systems for filament lamps
S.R. HD 60364-7-740:2006	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES
IEC 60598-2-6:1994	Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps
EN 60598-2-6:1994/A1:1997	LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 6: LIMINAIRES WITH BUILT-IN TRANSFORMERS OR CONVERTERS FOR FILAMENT LAMPS
HD 60364-7-740:2006/A11:2017	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES

IEC 60730-2-3:2006	Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
IEC 60127:1974	Cartridge fuse-links for miniature fuses
IEC 60695-2-1:1991	Fire hazard testing - Part 2: Test methods - Section 1: Glow-wire test and guidance
IEC 60364-4-41:2005+AMD1:2017 CSV	Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 60269-2:2013+AMD1:2016 CSV	Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
IEC 61047:2004	DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements
IEC 60085:2007	Electrical insulation - Thermal evaluation and designation
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC 60269-3:2010+AMD1:2013 CSV	Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
IEC 60691:2015	Thermal-links - Requirements and application guide
IEC 60598-1:2014+AMD1:2017 CSV	Luminaires - Part 1: General requirements and tests
ISO 4046:1978	Paper, board, pulp and related terms — Vocabulary
IEC 60051:1973	Recommendations for direct acting indicating electrical measuring instruments and their accessories
IEC 60920:1990	Ballasts for tubular fluorescent lamps - General and safety requirements

View more information

$508.82

Including GST where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

IEC 61046:1993

Superseded

Table of Contents

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription