IEEE 112-2004
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
Available format(s)
PDF
Superseded date
25-02-2019
Language(s)
English
Published date
04-11-2004
1. Overview
2. Normative references
3. General
4. Measurements
5. Machine losses and tests for losses
6. Determination of efficiency
7. Other performance tests
8. Miscellaneous tests
9. Forms
Annex A (informative) - Bibliography
Annex B (informative) - Typical report of test form for
routine tests
Annex C (informative) - Typical report of test form
Annex D (informative) - Units of measure
Annex E (informative) - Total error of reading
Defines instructions for conducting and reporting the more generally applicable and acceptable tests of polyphase induction motors and generators.
| Committee |
Electric Machinery
|
| DocumentType |
Standard
|
| ISBN |
978-0-7381-3978-4
|
| Pages |
83
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DIN EN 61800-9-2 : 2018-01 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS (IEC 61800-9-2:2017) |
| BS EN 61800-7-202:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Profile type 2 specification |
| 08/30165047 DC : DRAFT JUNE 2008 | BS EN ISO 9906 - ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS |
| CSA C392 : 2011 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
| MIL-STD-1412 Revision A:1986 | MOTOR, ELECTRIC FOR AIR CONDITIONER APPLICATIONS METHODS OF TEST AND INSTRUCTIONS |
| MIL-DTL-17060 Revision G:2009 | MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE |
| CSA C392 : 2011 : INC : UPD 2 : 2012 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
| CSA C390 : 2010 : INC : UPD 1 : 2015 : R201500 | TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS |
| IEEE 1242-1999 | IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants |
| IEEE 3004.8-2016 | IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
| EN 61800-9-2:2017 | Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters |
| ASTM F 2361 : 2003 | Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower |
| I.S. EN 61800-7-202:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-202: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - PROFILE TYPE 2 SPECIFICATION |
| S.R. CLC/TS 60034-31:2011 | ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE |
| VDE 0160-109-2 : 2018-01 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS (IEC 61800-9-2:2017) |
| ASTM F 2361 : 2003 : R2013 | Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower |
| DIN EN ISO 9906 E : 2013 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| IEEE DRAFT 1147 : D8 2005 | GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS |
| IEEE C37.96-2012 | IEEE Guide for AC Motor Protection |
| IEEE 1566-2015 REDLINE | IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger |
| MIL-HDBK-117 Base Document:1991 | Motors, Electric, Small Acquisition, Operations and Support for Primer (No S/S Document) |
| ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| IEEE 334 : 2007 | QUALIFYING CONTINUOUS DUTY CLASS 1E MOTORS FOR NUCLEAR POWER GENERATING STATIONS |
| DD CLC/TS 60034-31:2011 | Rotating electrical machines Selection of energy-efficient motors including variable speed applications. Application guide |
| CSA C392 : 2011 : INC : UPD 1 : 2011 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
| DD IEC TS 60034-31 : DRAFT JULY 2010 | ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE |
| SAE J 2907 : 2018 | PERFORMANCE CHARACTERIZATION OF ELECTRIFIED POWERTRAIN MOTOR-DRIVE SUBSYSTEM |
| AMCA 210 : 2016 | LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING |
| CLC/TS 60034-31:2011 | Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide |
| ASHRAE GUIDELINE 14 : 2014 | MEASUREMENT OF ENERGY, DEMAND, AND WATER SAVINGS |
| I.S. EN ISO 9906:2012 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| NEMA EW 1-1988 (R1994, R1999, R2004) | Electric Arc-Welding Power Sources |
| NEMA EW 3:1983(R2002) | Semi-Automatic Wire-Feed Systems for Arc Welding |
| NEMA SM 24-1991 (R1997, R2002) | LAND BASED STEAM TURBINE GENERATOR SETS 0 TO 33,000 kW |
| NEMA ICS 7.2 : 2015 | APPLICATION GUIDE FOR AC ADJUSTABLE SPEED DRIVE SYSTEMS |
| NEMA EW 7 : 1989 | ELECTRICAL ARC WELDING POWER SOURCES FOR THE NON-PROFESSIONAL OPERATOR |
| NEMA ICS 16:2001 | Motion/Position Control Motors, Controls and Feedback Devices |
| ANSI/NEMA C50.41 : 2012 | POLYPHASE INDUCTION MOTORS FOR POWER GENERATION STATIONS |
| CSA C747 : 2009 : INC : UPD 1 : 2016 : R201400 | ENERGY EFFICIENCY TEST METHODS FOR SMALL MOTORS |
| CSA C22.2 No. 100 : 2014 | MOTORS AND GENERATORS |
| 15/30314548 DC : 0 | BS EN 61800-9-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
| IEEE 1290-2015 REDLINE | IEEE Guide for Motor-Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power-Generating Stations |
| BS EN 61800-9-2:2017 | Adjustable speed electrical power drive systems Ecodesign for power drive systems, motor starters, power electronics and their driven applications. Energy efficiency indicators for power drive systems and motor starters |
| CSA C392 : 2011 : R2016 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
| CSA C747 : 2009 : R2014 | ENERGY EFFICIENCY TEST METHODS FOR SMALL MOTORS |
| IEEE 95-2002 | IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage |
| ASTM F 2361 : 2003 : R2009 | Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower |
| API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
| IEC TS 60034-31:2010 | Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide |
| IEC 61800-9-2:2017 | Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters |
| BS EN ISO 9906:2012 | Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1, 2 and 3 |
| DIN EN ISO 9906:2013-03 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| NASA SSTD 8070 0081 : 2001 | FACILITY ELECTRICAL STANDARD |
| IEEE 464 : 1981 | GROUNDED 830 V THREE-PHASE ELECTRICAL SYSTEM FOR OIL FIELD SERVICE, RECOMMENDED PRACTICE FOR |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| UNI EN ISO 9906 : 2012 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 |
| IEEE DRAFT 841 : MARCH 2000 | DRAFT STANDARD FOR PETROLEUM AND CHEMICAL INDUSTRY - SEVERE DUTY TOTALLY ENCLOSED FAN-COOLED (TEFC) SQUIRREL CAGE INDUCTION MOTORS - UP TO AND INCLUDING 370 KV (500HP) |
| HI 14.6 : 2016 | ROTODYNAMIC PUMPS FOR HYDRAULIC PERFORMANCE ACCEPTANCE TESTS |
| AMCA 208 : 2018 | CALCULATION OF THE FAN ENERGY INDEX |
| CSA C747:2009 | ENERGY EFFICIENCY TEST METHODS FOR SMALL MOTORS |
| CSA C390 : 2010 : R2015 | TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS |
| IEEE 1415 : 2006 | INDUCTION MACHINERY MAINTENANCE TESTING AND FAILURE ANALYSIS |
| IEEE 1205-2014 | IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear Facilities |
| IEEE 115-2009 REDLINE | IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
| IEEE 1147-2005 | IEEE Guide for the Rehabilitation of Hydroelectric Power Plants |
| ISO 9906:2012 | Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
| IEC 61800-7-202:2015 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
| EN ISO 9906:2012 | Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012) |
| IEEE 241 : 1990 | ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS |
| ASHRAE 51 : 2016 | LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING |
| IEEE 1068-2015 REDLINE | IEEE Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process Industries |
| CSA C390 : 2010(R2015) | TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS |
| CSA C390:2010 | TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS |
| IEEE 252 : 1995 | TEST PROCEDURE FOR POLYPHASE INDUCTION MOTORS HAVING LIQUID IN THE MAGNETIC GAP |
| I.S. EN 61800-9-2:2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 9-2: ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - ENERGY EFFICIENCY INDICATORS FOR POWER DRIVE SYSTEMS AND MOTOR STARTERS |
| CSA C390 : 2010 : INC : UPD 2 : 2016 :R201500 | TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS |
| IEEE 45.6-2016 | IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing |
| API TR 11L6 : 2008 | TECHNICAL REPORT ON ELECTRIC MOTOR PRIME MOVER FOR BEAM PUMPING UNIT SERVICE |
| IEEE 1349-2011 REDLINE | IEEE Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations |
| IEEE 841-2009 | IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp) |
| IEEE DRAFT 11 : D2 98 | DRAFT STANDARD FOR ROTATING ELECTRIC MACHINERY FOR RAIL AND ROAD VEHICLES |
| EN 61800-7-202:2016 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
| IEEE 1812-2014 | IEEE Trial-Use Guide for Testing Permanent Magnet Machines |
| IEEE 334-2006 | IEEE Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations |
| IEEE 1068-2009 | IEEE Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process Industries |
| IEEE 1889-2018 | IEEE Guide for Evaluating and Testing the Electrical Performance of Energy Saving Devices |
| IEEE 1566-2005 | IEEE Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger |
| IEC 60034-9:2003+AMD1:2007 CSV | Rotating electrical machines - Part 9: Noise limits |
| IEEE 120-1989 | IEEE Master Test Guide for Electrical Measurements in Power Circuits |
| IEEE 118-1978 | IEEE Standard Test Code for Resistance Measurement |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| IEC 60034-14:2003+AMD1:2007 CSV | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
| IEEE 115-2009 REDLINE | IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
| IEEE 119-1974 | IEEE Recommended Practice for General Principles of Temperature Measurement as Applied to Electrical Apparatus |
| API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
| IEEE 43-2013 REDLINE | IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery |
| IEEE 43-2000 | IEEE Recommended Practice for Testing Insulation Resistance of Rotating Machinery |
$230.47
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.