Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEEE 85-1973

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

IEEE Test Procedure for Airborne Sound Measurements on Rotating Electric Machinery
Withdrawn date

05-08-1996

Published date

29-08-1980

1 Scope
2 Definitions and terms
2.1 Sound pressure level
2.2 A-weighted sound level
2.3 Octave band level
2.4 Sound power level
2.5 A-weighted sound power level
2.6 Prescribed surface
2.7 Equivalent radius
2.8 Reference distance
2.9 Reference radius
2.10 Background level
2.11 Mean sound pressure level or mean sound level
2.12 Machine
2.12.1 Small machine
2.12.2 Medium machine
2.12.3 Large machine
3 Installation and operation
3.1 Machine mounting
3.1.1 Field installation
3.1.2 Test mounting
3.1.3 Multiunit machines
3.2 Operating condition
3.2.1 No-load test
3.2.2 Full-load test
4 Measuring instruments
4.1 Sound level meter
4.2 Band filter networks
4.3 Level recorder
4.4 Sound measuring systems
4.4.1 Microphone
4.4.2 Interconnecting cable
4.4.3 Microphone signal amplifier
4.4.4 Frequency analyzer
4.5 Calibration
4.6 System check out
4.7 Electrical characteristic measurement
         instrumentation
5 Test environment
5.1 Free field over a reflecting plane
5.1.1 Free-field conditions in a test room
5.1.2 Other free-field situations
5.2 Reverberant field
5.3 Semireverberant field
5.4 Test to determine type of environment
5.5 Background level
6 Quantities to be reported
6.1 Standard
6.2 Additional
7 Methods of measurement
7.1 Free field over a reflecting plane
7.1.1 Location of measurement points
7.1.1.1 Small machines
7.1.1.2 Medium machines
7.1.1.3 Large machines
7.1.2 Test procedure
7.1.3 Measurement corrections
7.1.4 Calculation of the mean level
7.1.5 Calculation of A-weighted mean sound level
         using octave band mean sound pressure levels
7.1.6 Calculation of the A-weighted mean sound level
         at a reference distance for the condition of a
         free field over a reflecting plane
7.1.7 Calculation of the A-weighted sound power level
7.1.8 Calculation of the octave band sound pressure
         level at the reference distance for the
         condition of a free field over a reflecting
         plane
7.2 Reverberant field
7.2.1 Reference sound source
7.2.2 Location of measurement points
7.2.3 Test procedure
7.2.4 Measurement corrections
7.2.5 Calculation of mean level
7.2.6 Calculation of the sound power level in octave
         bands
7.2.7 Calculation of the mean sound pressure levels
         in octave bands at the reference distance for
         the conditions of a free field over a
         reflecting plane
7.2.8 Calculation of the A-weighted mean sound level
         at a reference distance for the condition of a
         free field over a reflecting plane
7.2.9 Calculation of A-weighted sound power level
7.3 Semireverberant field
7.3.1 Reference sound source
7.3.2 Location of measurement points
7.3.3 Test procedure
7.3.4 Measurement corrections
7.3.5 Calculation of the mean level
7.3.6 Calculation of the sound power level in octave
         bands
7.3.7 Calculation of the mean sound pressure levels
         in octave bands at the reference distance for
         conditions of a free field over a reflecting
         plane
7.3.8 Calculation of the A-weighted mean sound level
         at the reference distance for the condition of
         a free field over a reflecting plane
7.3.9 Calculation of A-weighted sound power level
8 Test report
Tables
1 Preferred frequencies for acoustical
         measurements
2 Corrections to be applied to obtain A-weighting
Figures
1(A) Prescribed points, small machines
1(B) Six-point hemisphere, small machines
2(A) Prescribed points, medium machines
2(B) Twelve-point hemisphere, medium machines
3 Prescribed points, large horizontal machines
4 Prescribed points, large vertical machines

Covers approved methods for reporting results and conducting tests to effect the uniform determination of rotating electric machine sound under steady-state conditions with an accuracy of 3dB tested in the following acoustical environments: free field, reverberant field, semireverberant field.

Committee
Electric Machinery
DocumentType
Standard
PublisherName
Institute of Electrical & Electronics Engineers
Status
Withdrawn

IEEE 252-2022 IEEE Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
IEEE 112-1996 IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
IEEE 113-1985 IEEE Guide: Test Procedures for Direct-Current Machines
06/19982093 DC : DRAFT AUG 2006
NEMA MG 3-1974 (R1995, R2000, R2006, R2012, R2014, R2021) Sound Level Prediction for Installed Rotating Electrical Machines
IEEE C57.12.11-1980 IEEE Guide for Installation of Oil-Immersed Transformers (10 MVA and Larger, 69-287 kV Rating)
IEEE 252 : 1995 TEST PROCEDURE FOR POLYPHASE INDUCTION MOTORS HAVING LIQUID IN THE MAGNETIC GAP
IEEE 115-2009 REDLINE IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis
IEEE 115-2019 IEEE Guide for Test Procedures for Synchronous Machines Including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis
IEEE 251-1984 IEEE Guide: Test Procedures for Direct-Current Tachometer Generators
IEEE 114-2010 IEEE Standard Test Procedure for Single-Phase Induction Motors

ANSI S1.4 : 1983 SPECIFICATION FOR SOUND LEVEL METERS
ANSI S1.11 : 2014 SPECIFICATION FOR OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND ANALOG AND DIGITAL FILTERS
ANSI/ASA S1.8 : 2016 REFERENCE VALUES FOR LEVELS USED IN ACOUSTICS AND VIBRATIONS
ANSI S1.12 : 67(R1997) LABORATORY STANDARD MICROPHONES, SPECIFICATIONS FOR,

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more