Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEEE C95.3-2002

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz
Available format(s)

Hardcopy , PDF

Superseded date

02-06-2021

Language(s)

English

Published date

11-01-2003

1. Overview
   1.1 Scope
   1.2 Purpose
   1.3 Frequency range
   1.4 Quantities and parameters to be measured
   1.5 Types of situations covered
2. References
3. Definitions
4. Measurement problems associated with RF hazard assessment
   4.1 Characteristics of RF EM radiation
   4.2 Summary of the measurement problem
   4.3 SAR measurement problems
   4.4 Induced current measurement problems
5. Instrumentation
   5.1 Instrumentation for external field measurements
   5.2 Desirable electrical performance characteristics
   5.3 Desirable physical characteristics
   5.4 Instrument types for external field measurements
   5.5 External field measuring instruments
   5.6 Instruments for measuring induced (body) current
   5.7 Instruments for measuring internal fields and SAR
6. Measurement of potentially hazardous exposure fields
   6.1 Preliminary considerations
   6.2 Safety precautions
   6.3 Measurement procedures for external fields
   6.4 Induced body current and contact current measurements
   6.5 Measurement procedures for internal fields (SAR)
   6.6 Estimation of SAR from external exposure-field
       measurement data
7. Theoretical calculations of SAR
   7.1 General
   7.2 Factors affecting the internal fields
   7.3 Low-frequency internal fields
   7.4 High-frequency behavior
   7.5 Methods of calculation
   7.6 Theoretical considerations for the determination
       of SAR associated with near-field exposures
Annex A (informative) Additional calibration techniques for
                      external field measuring instruments
Annex B (informative) Theoretical calculations of exposure
                      fields
Annex C (informative) Additional techniques for SAR
                      measurement
Annex D (informative) Finite difference time domain (FDTD)
                      method
Annex E (informative) Peak spatial-average SAR
Annex F (informative) Normalized on-axis power density:
                      circular aperture
Annex G (informative) Bibliography

Provides specifications for preferred methods for measuring and computing external radio frequency electromagnetic fields to which persons may be exposed. Specifies preferred methods for the measurement and computation of the resulting fields and currents that are induced in bodies of humans exposed to these fields over the frequency range of 100 kHz - 300 GHz.

Committee
International Committee on Electromagnetic Sa
DocumentType
Standard
Pages
133
PublisherName
Institute of Electrical & Electronics Engineers
Status
Superseded
SupersededBy
Supersedes

MIL M 81927 : B MANUAL, TECHNICAL, GENERAL STYLE AND FORMAT OF (WORK PACKAGE CONCEPT)
IEEE DRAFT 1309 : D2.0 2005 CALIBRATION OF ELECTROMAGNETIC FIELD SENSORS AND PROBES, EXCLUDING ANTENNAS, FROM 9 KHZ TO 40 GHZ
CEI 211-7/C : 2010 GUIDE FOR THE MEASUREMENT AND THE EVALUATION OF ELECTROMAGNETIC FIELDS IN THE FREQUENCY RANGE 10 KHZ - 300 GHZ, WITH REFERENCE TO THE HUMAN EXPOSURE - APPENDIX C: SISTEMS TO IMPLEMENT WIDEBAND WIRELESS ACCESS AND CONNECTION
AECTP-500 : 2016 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION
CEI EN 50496 : 2010 DETERMINATION OF WORKERS' EXPOSURE TO ELECTROMAGNETIC FIELDS AND ASSESSMENT OF RISK AT A BROADCAST SITE
BS IEC/IEEE 62704-2 : 2017 DETERMINING THE PEAK SPATIAL-AVERAGE SPECIFIC ABSORPTION RATE (SAR) IN THE HUMAN BODY FROM WIRELESS COMMUNICATIONS DEVICES, 30 MHZ TO 6 GHZ - PART 2: SPECIFIC REQUIREMENTS FOR FINITE DIFFERENCE TIME DOMAIN (FDTD) MODELLING OF EXPOSURE FROM VEHICLE MOUNTED ANTENNAS
I.S. EN 62232:2017 DETERMINATION OF RF FIELD STRENGTH, POWER DENSITY AND SAR IN THE VICINITY OF RADIOCOMMUNICATION BASE STATIONS FOR THE PURPOSE OF EVALUATING HUMAN EXPOSURE
IEEE DRAFT C95.1 : D2.3 2005 SAFETY LEVELS WITH RESPECT TO HUMAN EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELDS, 3 KHZ TO 300 GHZ
MIL-STD-3001-1 Revision A:2014 PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS)
BS EN 62226-1:2005 Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field induced in the human body General
EN 62232:2017 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
AAMI ISO TIR 10974 : 2012 ASSESSMENT OF THE SAFETY OF MAGNETIC RESONANCE IMAGING FOR PATIENTS WITH AN ACTIVE IMPLANTABLE MEDICAL DEVICE
IEC/IEEE 62704-2:2017 Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz - Part 2: Specific requirements for finite difference time domain (FDTD) modelling of exposure from vehicle mounted antennas
EN 61000-4-20:2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
IEEE 1654:2009 RF PROTECTION OF PERSONNEL WORKING IN THE VICINITY OF WIRELESS COMMUNICATIONS ANTENNAS ATTACHED TO ELECTRIC POWER LINE STRUCTURES
BS EN 61000-4-20:2003 Electromagnetic Compatibility (EMC) Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
13/30276624 DC : 0 BS EN 62704-1 ED 1.0 - RECOMMENDED PRACTICE FOR DETERMINING THE PEAK SPATIAL-AVERAGE SPECIFIC ABSORPTION RATE (SAR) IN THE HUMAN BODY FROM WIRELESS COMMUNICATIONS DEVICES; 30 MHZ -6 GHZ - PART 1: GENERAL REQUIREMENTS FOR USING THE FINITE DIFFERENCE TIME DOMAIN (FDTD) METHOD SAR CALCULATIONS
IEEE/ANSI C63.19-2011 REDLINE American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids
CEI EN 62226-1 : 2006 EXPOSURE TO ELECTRIC OR MAGNETIC FIELDS IN THE LOW AND INTERMEDIATE FREQUENCY RANGE - METHODS FOR CALCULATING THE CURRENT DENSITY AND INTERNAL ELECTRIC FIELD INDUCED IN THE HUMAN BODY - PART 1: GENERAL
ISO 19859:2016 Gas turbine applications Requirements for power generation
CEI EN 61000-4-20 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
IEEE C95.1-2345-2014 IEEE Standard for Military Workplaces--Force Health Protection Regarding Personnel Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz
ISO/TR 10305-2:2003 Road vehicles Calibration of electromagnetic field strength measuring devices Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz
I.S. EN 62226-1:2005 EXPOSURE TO ELECTRIC OR MAGNETIC FIELDS IN THE LOW AND INTERMEDIATE FREQUENCY RANGE - METHODS FOR CALCULATING THE CURRENT DENSITY AND INTERNAL ELECTRIC FIELD INDUCED IN THE HUMAN BODY - PART 1: GENERAL
BS IEC 62232:2011 Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
13/30276620 DC : 0 BS EN 62704-2 ED 1.0 - DETERMINING THE PEAK SPATIAL-AVERAGE SPECIFIC ABSORPTION RATE (SAR) IN THE HUMAN BODY FROM WIRELESS COMMUNICATIONS DEVICES 30MHZ - 6MHZ - PART 2: SPECIFIC REQUIREMENTS FOR FINITE DIFFERENCE TIME DOMAIN (FDTD) MODELING OF EXPOSURE FROM VEHICLE MOUNTED ANTENNAS
IEEE 1309-2013 REDLINE IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz
BS EN 62232:2017 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure (IEC 62232:2017)
IEC/IEEE 62704-1:2017 Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz - Part 1: General requirements for using the finite difference time-domain (FDTD) method for SAR calculations
BS EN 50496:2008 Determination of workers\' exposure to electromagnetic fields and assessment of risk at a broadcast site
IEEE C95.1-2005 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz
ANSI C95.5 : 1981 RF AND MICROWAVE ELECTROMAGNETIC FIELDS, RECOMMENDED PRACTICE FOR MEASUREMENT OF HAZARDOUS,
IEEE 475-2000 IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz
ISO/TS 10974:2012 Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device
IEC 62232:2017 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
I.S. EN 61000-4-20:2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
UNE-EN 61000-4-20:2011 Electromagnetic compatibility (EMC) -- Part 4-20: Testing and measurement techniques - Emission and immunity testing in Transverse Electromagnetic (TEM) waveguides - Basic EMC publication
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
IEC 61000-4-20:2010 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
IEEE DRAFT C63.19 : 2005 METHODS OF MEASUREMENT OF COMPATIBILITY BETWEEN WIRELESS COMMUNICATIONS DEVICES AND HEARING AIDS
IEEE C95.7-2014 IEEE Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHz
PD ISO/TS 10974:2012 Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device
PD IEC/TR 62630:2010 Guidance for evaluating exposure from multiple electromagnetic sources
IEC TR 62630:2010 Guidance for evaluating exposure from multiple electromagnetic sources
CEI 211-7 : 2001 GUIDE FOR THE MEASUREMENT AND THE EVALUATION OF ELECTROMAGNETIC FIELDS IN THE FREQUENCY RANGE 10 KHZ - 300 GHZ, WITH REFERENCE TO THE HUMAN EXPOSURE
IEEE 1528-2013 REDLINE IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
IEC 62226-1:2004 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 1: General
EN 62226-1:2005 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 1: General
IEEE 1528.7-2020 IEEE Guide for EMF Exposure Assessment of Internet of Things (IoT) Technologies and Devices
IEEE C63.19-2007 American National Standard Methods of Measurement for Hearing Aid Compatibility with Wireless Communications
IEEE C95.7-2005 IEEE Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHz
IEEE C95.1-2019 IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz
IEEE 1309-2005 IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHz

IEEE 1309-2013 REDLINE IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz
SAE ARP 958 : 1999 ELECTROMAGNETIC INTERFERENCE MEASUREMENT ANTENNAS; STANDARD CALIBRATION METHOD
IEEE 1460 : 1996 GUIDE FOR THE MEASUREMENT OF QUASI-STATIC MAGNETIC AND ELECTRIC FIELDS
IEEE C63.2-2009 American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications
IEEE C95.1-2005 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz
MIL-STD-462 Revision D:1993 MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS
ANSI/NCSL Z540 2 : 1997(R2012) U.S. GUIDE TO EXPRESSION OF UNCERTAINTY IN MEASUREMENT

View more information
$268.19
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more