Name: IS 1367 : Part 3 : 2017
Brand: BIS

TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS

Published date

12-01-2013

Publisher

Bureau of Indian Standards

NATIONAL FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Designation system for property classes
6 Materials
7 Mechanical and physical properties
8 Applicability of test methods
9 Test methods
10 Marking
Annex A (informative) - Relationship between
        tensile strength and elongation after
        fracture
Annex B (informative) - Influence of elevated
        temperatures on mechanical properties
        of fasteners
Annex C (informative) - Elongation after
        fracture for full-size fasteners, A[f]
Bibliography

Describes mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 degrees C to 35 degrees C.

Committee	PGD 37
DocumentType	Revision
PublisherName	Bureau of Indian Standards
Status	Current

Standards	Relationship
ISO 898-1:2013	Identical

ISO 6507-1:2005	Metallic materials Vickers hardness test Part 1: Test method
ISO 16047:2005	Fasteners — Torque/clamp force testing
ISO 898-2:2012	Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
EN 10269:2013	Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
ISO 898-7:1992	Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
ISO 10683:2014	Fasteners Non-electrolytically applied zinc flake coatings
ISO 6506-1:2014	Metallic materials Brinell hardness test Part 1: Test method
ISO 10684:2004	Fasteners — Hot dip galvanized coatings
ISO 4042:1999	Fasteners Electroplated coatings
ISO 6157-3:1988	Fasteners Surface discontinuities Part 3: Bolts, screws and studs for special requirements
ISO 6157-1:1988	Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
ISO 6508-1:2016	Metallic materials — Rockwell hardness test — Part 1: Test method
ISO 724:1993	ISO general-purpose metric screw threads — Basic dimensions
ISO 16426:2002	Fasteners — Quality assurance system
ISO 6892-1:2016	Metallic materials Tensile testing Part 1: Method of test at room temperature
ISO 965-2:1998	ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
ISO 225:2010	Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions
ISO 898-5:2012	Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread
ISO 148-1:2016	Metallic materials — Charpy pendulum impact test — Part 1: Test method
ISO 262:1998	ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
ISO 965-4:1998	ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO 68-1:1998	ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
ISO 273:1979	Fasteners — Clearance holes for bolts and screws
ISO 261:1998	ISO general purpose metric screw threads General plan
ISO 965-1:2013	ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
ISO 7500-1:2015	Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
ISO 1891:2009	Fasteners — Terminology