ISO 10846-2:2008
Current
Current
The latest, up-to-date edition.
Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French, Russian
Published date
05-08-2008
ISO 10846-2:2008 specifies a method for determining the dynamic transfer stiffness for translations of resilient supports, under specified preload. The method concerns the laboratory measurement of vibrations on the input side and blocking output forces and is called “the direct method.” The method is applicable to test elements with parallel flanges (see Figure 1).
Resilient elements, which are the subject of ISO 10846-2:2008, are those which are used to reduce
the transmission of vibration in the lower part of the audible frequency range (typically 20 Hz to 500 Hz) to a structure which may, for example, radiate unwanted fluid-borne sound (airborne, waterborne or others), and
the transmission of low-frequency vibrations (typically 1 Hz to 80 Hz), which may, for example, act upon human subjects or cause damage to structures of any size when vibration is too severe.
| DevelopmentNote |
Supersedes ISO/DIS 10846-2. (08/2008)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 10846-2 : 2008 | Identical |
| GOST R ISO 10846-2 : 2010 | Identical |
| NBN EN ISO 10846-2 : 2009 | Identical |
| NEN EN ISO 10846-2 : 2008 | Identical |
| NS EN ISO 10846-2 : 2ED 2008 | Identical |
| I.S. EN ISO 10846-2:2008 | Identical |
| PN EN ISO 10846-2 : 2009 | Identical |
| SAC GB/T 22159-2 : 2012 | Identical |
| SN EN ISO 10846-2:2008 | Identical |
| UNI EN ISO 10846-2 : 2008 | Identical |
| UNE-EN ISO 10846-2:2009 | Identical |
| EN ISO 10846-2:2008 | Identical |
| DIN EN ISO 10846-2:2008-11 | Identical |
| BS EN ISO 10846-2:2008 | Identical |
| NEN ISO 10846-2 : 1997 | Identical |
| BS ISO 2017-1:2005 | Mechanical vibration and shock. Resilient mounting systems Technical information to be exchanged for the application of isolation systems |
| DIN EN 13146-9:2011-12 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
| BS ISO 18312-2:2012 | Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures Indirect method |
| MIL-DTL-17508 Revision G:2017 | Mounts, Resilient: Types 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, and 6E900BB |
| MIL-DTL-24709 Revision A:2018 | PADS, DISTRIBUTED ISOLATION MATERIAL, TYPE R-50-21/64 |
| UNE-EN 13146-9:2011 | Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness |
| ISO 18437-5:2011 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element analysis |
| UNI EN 13146-9 : 2011 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
| BS EN ISO 10846-4:2003 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Dynamic stiffness of elements other than resilient supports for translatory motion |
| EN 12354-5:2009/AC:2010 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| ONORM EN 12354-5 : 2011 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| I.S. EN 12354-5:2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| 11/30131826 DC : 0 | BS ISO 18312-2 - MECHANICAL VIBRATION AND SHOCK - MEASUREMENT OF VIBRATION POWER FLOW FROM MACHINES INTO CONNECTED SUPPORT STRUCTURES - PART 2: INDIRECT METHOD |
| MIL-PRF-32407 Revision A:2016 | MOUNTS, RESILIENT (SURFACE SHIP APPLICATION) |
| ISO 18312-2:2012 | Mechanical vibration and shock — Measurement of vibration power flow from machines into connected support structures — Part 2: Indirect method |
| DIN EN 12354-5:2009-10 | Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment |
| I.S. EN ISO 10846-1:2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES |
| DD ENV 13481-6:2002 | Railway applications. Track. Performance requirements for fastening systems Special fastening systems for attenuation of vibration |
| 11/30237779 DC : DRAFT MAR 2011 | BS ISO 18437-1 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 1: PRINCIPLES AND GUIDELINES |
| MIL-DTL-19863 Revision E:2018 | Mount, Resilient: Type 5B5,000H |
| ISO 2017-1:2005 | Mechanical vibration and shock — Resilient mounting systems — Part 1: Technical information to be exchanged for the application of isolation systems |
| DIN EN ISO 10846-1:2008-11 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES |
| ENV 13481-6 : DRAFT 2002 COR 04 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 6: SPECIAL FASTENING SYSTEMS FOR ATTENUATION OF VIBRATION |
| UNI EN ISO 10846-1 : 2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 1: PRINCIPLES AND GUIDELINES |
| UNI EN 12354-5 : 2009 | BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT |
| 03/306100 DC : DRAFT APR 2003 | ISO 18437-3 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 3: SINGLE CANTILEVER BEAM METHOD |
| BS ISO 18437-5:2011 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Poisson ratio based on comparison between measurements and finite element analysis |
| 03/305847 DC : DRAFT APR 2003 | ISO 18437-2 - MECHANICAL VIBRATION AND SHOCK - CHARACTERISATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 2: RESONANCE METHOD |
| BS EN 16730:2016 | Railway applications. Track. Concrete sleepers and bearers with under sleeper pads |
| DIN EN 16730:2016-09 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| BS EN 13146-9 : 2009 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
| MIL-DTL-21649 Revision D:2017 | MOUNT, RESILIENT, TYPE 5M10,000-H |
| I.S. EN 13146-9:2009 | RAILWAY APPLICATIONS - TRACK - TEST METHODS FOR FASTENING SYSTEMS - PART 9: DETERMINATION OF STIFFNESS |
| BS EN ISO 10846-1:2008 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Principles and guidelines |
| ISO 10846-4:2003 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
| BS EN 12354-5:2009 | Building acoustics. Estimation of acoustic performance of building from the performance of elements Sounds levels due to the service equipment |
| ISO 9241-6:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 6: Guidance on the work environment |
| ISO 10846-1:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines |
| EN 13146-9:2009+A1:2011 | Railway applications - Track - Test methods for fastening systems - Part 9: Determination of stiffness |
| EN ISO 10846-1:2008 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008) |
| EN ISO 10846-4 : 2003 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 4: DYNAMIC STIFFNESS OF ELEMENTS OTHER THAN RESILIENT SUPPORTS FOR TRANSLATORY MOTION (ISO 10846-4:2003) |
| EN ISO 9241-6:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999) |
| EN 16730:2016 | Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
| UNE-EN 16730:2017 | Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
| BS ISO 18437-1:2012 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Principles and guidelines |
| DIN EN 16730 E : 2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| I.S. EN 16730:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| I.S. ENV 13481-6:2002 | RAILWAY APPLICATIONS - TRACK - PERFORMANCE REQUIREMENTS FOR FASTENING SYSTEMS - PART 6: SPECIAL FASTENING SYSTEMS FOR ATTENUATION OF VIBRATION |
| ISO 18437-1:2012 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines |
| ISO 10846-4:2003 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
| ISO 16063-21:2003 | Methods for the calibration of vibration and shock transducers Part 21: Vibration calibration by comparison to a reference transducer |
| ISO 10846-3:2002 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
| ISO 7626-1:2011 | Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| ISO 7626-2:2015 | Mechanical vibration and shock Experimental determination of mechanical mobility Part 2: Measurements using single-point translation excitation with an attached vibration exciter |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 10846-1:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines |
| ISO 1683:2015 | Acoustics Preferred reference values for acoustical and vibratory levels |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| ISO 2017-1:2005 | Mechanical vibration and shock — Resilient mounting systems — Part 1: Technical information to be exchanged for the application of isolation systems |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
$284.56
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - Russian
PDF 1 User - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF 1 User - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - Russian
PDF 1 User - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.