Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 11114-2:2013

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

20-10-2021

Language(s)

English, French

Published date

21-03-2013

ISO 11114-2:2013 gives guidance in the selection and evaluation of compatibility between non-metallic materials for gas cylinders and valves and the gas contents. It also covers bundles, tubes and pressure drums.

ISO 11114-2:2013 can be helpful for composite and laminated materials used for gas cylinders.

It does not cover the subject completely and is intended to give guidance only in evaluating the compatibility of gas/material combinations.

Only the influence of the gas in changing the material and mechanical properties is considered (for example chemical reaction or change in physical state). The basic properties of the materials, such as mechanical properties, required for design purposes are normally available from the materials' supplier and are not considered.

The compatibility data given are related to single component gases but can be used to some extent for gas mixtures. Ceramics, glasses, and adhesives are not covered.

Other aspects such as quality of delivered gas are not considered.

ISO 11114-2:2013 is not intended to be used for cryogenic fluids (see ISO 21010).

DevelopmentNote
Supersedes ISO/DIS 11114-2. (03/2013)
DocumentType
Standard
Pages
14
PublisherName
International Organization for Standardization
Status
Superseded
SupersededBy
Supersedes

ISO 17879:2017 Gas cylinders — Self-closing cylinder valves — Specification and type testing
EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
BS EN ISO 25760:2015 Gas cylinders. Operational procedures for the safe removal of valves from gas cylinders
BS ISO 12619-14:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Flexible fuel line
10/30196141 DC : 0 BS ISO 11119-3 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES WITH NON-METALLIC AND NON-LOAD SHARING METAL LINERS
I.S. EN ISO 11118:2015&LC:2015-12 GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015)
BS ISO 21013-2 : 2007 CRYOGENIC VESSELS - PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE - PART 2: NON-RECLOSABLE PRESSURE-RELIEF DEVICES
11/30196123 DC : DRAFT MAY 2011 BS ISO 11119-2 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 2: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS WITH LOAD-SHARING METAL LINERS
02/705544 DC : DRAFT APR 2002 BS EN ISO 10297 - TRANSPORTABLE GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING
17/30359992 DC : 0 BS ISO 21266-1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLENDS FUEL SYSTEMS - PART 1: SAFETY REQUIREMENTS
BS EN ISO 24431:2016 Gas cylinders. Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene). Inspection at time of filling
16/30299123 DC : 0 BS EN ISO 15996 - GAS CYLINDERS - RESIDUAL PRESSURE VALVES - SPECIFICATION AND TYPE TESTING OF CYLINDER VALVES INCORPORATING RESIDUAL PRESSURE DEVICES
15/30315882 DC : 0 BS ISO 12619-3:2014/AMD 1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 3: PRESSURE REGULATOR
DIN EN ISO 11118:2016-03 GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS
DIN EN 16509:2014-12 TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING
ISO 21013-1:2008 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves
NF EN ISO 15995 : 2011 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
DIN EN ISO 15995:2010-11 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
12/30197523 DC : 0 BS ISO 12619-2 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/METHANE BLENDS FUEL COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS
16/30342629 DC : 0 BS ISO 12619-9 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 9: PRESSURE RELIEF VALVE (PRV)
BS EN ISO 10961:2012 Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection
PREN 14129 : DRAFT 2011 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS
BS ISO 21011:2008 Cryogenic vessels. Valves for cryogenic service
17/30362705 DC : 0 BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS
16/30321031 DC : 0 BS ISO 12619-6 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 6: AUTOMATIC VALVE
BS ISO 12619-16:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Fittings
10/30227668 DC : 0 BS EN 14678-3 - LPG EQUIPMENT AND ACCESSORIES - PART 3: REFUELLING INSTALLATIONS AT PRIVATE AND INDUSTRIAL PREMISES
15/30315879 DC : 0 BS ISO 12619-2:2014/AMD 1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS
DIN EN ISO 13293:2013-03 RECREATIONAL DIVING SERVICES - REQUIREMENTS FOR GAS BLENDER TRAINING PROGRAMMES (ISO 13293:2012)
10/30227671 DC : 0 BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
BS ISO 12619-12:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Gas-tight housing and ventilation hoses
14/30281578 DC : 0 BS ISO 14456 - GAS CYLINDERS - GAS PROPERTIES AND ASSOCIATED CLASSIFICATION (FTSC) CODES
BS EN 16509:2014 Transportable gas cylinders. Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders). Design, construction, filling and testing
12/30250279 DC : 0 BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
PD ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
09/30202307 DC : 0 BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
I.S. EN 14678-3:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
I.S. EN ISO 25760:2015 GAS CYLINDERS - OPERATIONAL PROCEDURES FOR THE SAFE REMOVAL OF VALVES FROM GAS CYLINDERS (ISO 25760:2009)
ISO 21010:2017 Cryogenic vessels — Gas/material compatibility
ISO 12619-13:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 13: Rigid fuel line in stainless steel
I.S. EN 16119:2013 LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING
UNI EN 13175 : 2015 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
BS EN ISO 7396-1:2016 Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum
ISO 12619-16:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 16: Fittings
I.S. EN 13175:2014 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
ONORM EN ISO 15245-1 : 2013 GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001 + AMD 1:2013)
ISO 21172-1:2015 Gas cylinders Welded steel pressure drums up to 3 000 litres capacity for the transport of gases Design and construction Part 1: Capacities up to 1 000 litres
ISO 12619-11:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 11: Excess flow valve
UNE-EN ISO 17879:2017 Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017)
BS EN 13175:2014 LPG Equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
UNE-EN 16119:2013 LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing
I.S. EN ISO 9539:2010 GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010)
EN 15202:2012 LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
I.S. EN 15202:2012 LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS
DIN EN ISO 11114-1:2012-07 GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1:2012 + AMD.1:2017)
DIN EN 14678-2:2012-04 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements (includes Amendment A1:2012)
BS EN ISO 11623:2015 Gas cylinders. Composite construction. Periodic inspection and testing
BS EN 14208:2004 Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction
BS EN 12863:2002 Transportable gas cylinders. Periodic inspection and maintenance of dissolved acetylene cylinders
ISO 13341:2010 Gas cylinders — Fitting of valves to gas cylinders
BS EN 13807:2017 Transportable gas cylinders. Battery vehicles and multiple-element gas containers (MEGCs). Design, manufacture, identification and testing
DIN EN 14893:2014-09 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
BS EN 14678-2 : 2007 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS
BS EN 15202:2012 LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
BS EN ISO 11114-3:2010 Gas cylinders. Compatibility of cylinder and valve materials with gas contents Autogenous ignition test for non-metallic materials in oxygen atmosphere
BS EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles. Nozzle, test requirements and dimensions
DIN EN 12863:2002-09 TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE OF DISSOLVED ACETYLENE CYLINDERS
I.S. EN 14678-2:2007 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS
I.S. EN ISO 11623:2015 GAS CYLINDERS - COMPOSITE CONSTRUCTION - PERIODIC INSPECTION AND TESTING (ISO 11623:2015, CORRECTED VERSION 2017-02)
ONORM EN 13953 : 2015 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
DIN EN ISO 10692-2:2003-04 GAS CYLINDERS - GAS CYLINDER VALVE CONNECTIONS FOR USE IN THE MICROELECTRONIC INDUSTRY - PART 2: SPECIFICATION AND TYPE TESTING FOR VALVE TO CYLINDER CONNECTIONS
EN ISO 13341:2010/A1:2015 Gas cylinders - Fitting of valves to gas cylinders - Amendment 1 (ISO 13341:2010/Amd 1:2015)
I.S. EN 13760:2003 AUTOMOTIVE LPG FILLING SYSTEM FOR LIGHT AND HEAVY DUTY VEHICLES - NOZZLE, TEST REQUIREMENTS AND DIMENSIONS
EN 12863:2002/A1:2005 TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE OF DISSOLVED ACETYLENE CYLINDERS
ONORM EN 12245 : 2012 TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS
DIN EN 16119:2013-05 LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing
DIN EN ISO 9539 E : 2014 GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010 + AMD.1:2013)
DIN EN 14678-3:2013-03 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
15/30309725 DC : 0 BS ISO 19016 - GAS CYLINDERS - CYLINDERS AND TUBES OF COMPOSITE CONSTRUCTION - MODAL ACOUSTIC EMISSION (MAE) TESTING FOR PERIODIC INSPECTION AND TESTING
08/30167437 DC : DRAFT JAN 2008 BS EN ISO 28622 - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
18/30347942 DC : DRAFT APR 2018 BS ISO 20766-9 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 9: PRESSURE RELIEVE DEVICE (PRD)
13/30248693 DC : 0 BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
17/30293100 DC : 0 BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS
16/30342728 DC : 0 BS ISO 12619-8 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 8: PRESSURE INDICATOR
PREN ISO 11114-3 : DRAFT 2008 TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 3: AUTOGENEOUS IGNITION TEST IN OXYGEN ATMOSPHERE
16/30301299 DC : 0 BS EN ISO 17879 - GAS CYLINDERS - SELF-CLOSING CYLINDER VALVES - SPECIFICATION AND TYPE TESTING
BS ISO 24431:2006 Gas cylinders. Cylinders for compressed and liquefied gases (excluding acetylene). Inspection at the time of filling
ISO 21013-2:2007 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices
17/30347933 DC : 0 BS ISO 20766-4 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEM COMPONENTS - PART 4: LEVEL INDICATOR
12/30265334 DC : 0 BS EN 13953 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
BS ISO 10961 : 2010 GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION
16/30343646 DC : 0 BS ISO 12619-16 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 16: FITTINGS
11/30248684 DC : 0 BS EN 14129 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS
EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016)
BS ISO 12619-8:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Pressure indicator
17/30347930 DC : 0 BS ISO 20766-3 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 3: 80% STOP VALVE
BS EN 14678-3:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Refuelling installations at commercial and industrial premises
BS ISO 12619-6:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components Automatic valve
EN ISO 15995:2010 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated (ISO 15995:2006)
UNI EN ISO 9539 : 2014 GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES
BS ISO 12619-11:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Excess flow valve
UNI EN 16119 : 2013 LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING
06/30154011 DC : DRAFT JULY 2006 ISO 21013-1 - CRYOGENIC VESSELS - PRESSURE RELIEF ACCESSORIES FOR - CRYOGENIC SERVICE - PART 1: RECLOSABLE PRESSURE RELIEF VALVES
NF EN ISO 14245 : 2011 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING
15/30296830 DC : 0 BS EN ISO 18119 - GAS CYLINDERS - SEAMLESS STEEL AND SEAMLESS ALUMINIUM-ALLOY GAS CYLINDERS AND TUBES - PERIODIC INSPECTION AND TESTING
04/19971661 DC : DRAFT APR 2004 BS ISO 15995 - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) CYLINDER VALVES - MANUALLY OPERATED
ISO 21011:2008 Cryogenic vessels — Valves for cryogenic service
08/30149718 DC : DRAFT JULY 2008 BS EN ISO 13341 - TRANSPORTABLE GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS
04/30077792 DC : DRAFT JUL 2004 ISO 3500 - GAS CYLINDERS - SEAMLESS STEEL CO[2] CYLINDERS FOR FIXED FIRE-FIGHTING INSTALLATIONS ON SHIPS
15/30280941 DC : 0 BS EN ISO 24431 - GAS CYLINDERS - CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING
ISO 11119-3:2013 Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners
ISO 14245:2006 Gas cylinders Specifications and testing of LPG cylinder valves Self-closing
DIN EN 14893 E : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
I.S. EN ISO 7396-1:2016 MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016)
BS EN ISO 9539 : 2010 GAS WELDING EQUIPMENT- MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES
I.S. EN 14071:2015 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
I.S. EN 16509:2014 TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING
BS EN ISO 15996:2017 Gas cylinders. Residual pressure valves. Specification and type testing of cylinder valves incorporating residual pressure devices
BS ISO 12619-2 : 2014 ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS
BS ISO 12619-3 : 2014 ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 3: PRESSURE REGULATOR
UNE-EN ISO 13293:2013 Recreational diving services - Requirements for gas blender training programmes (ISO 13293:2012)
ISO 12619-3:2014 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 3: Pressure regulator
ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
UNE-EN 14678-2:2009 LPG equipment and accessories - Equipment for Liquefied Petroleum Gas automotive filling stations - Part 2: Components other than dispensers, and installation requirements
ISO 11119-2:2012 Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
UNE-EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
BS EN 14071:2015 LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment
UNI EN ISO 15245-1 : 2013 GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION
EN ISO 10961:2012 Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010)
EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
PREN ISO 12209 : DRAFT 2012 GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO/DIS 12209:2012)
DIN EN 12252:2014-07 LPG equipment and accessories - Equipping of LPG road tankers
DIN EN ISO 22435:2013-03 GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING (ISO 22435:2007 + AMD.1:2012)
DIN EN 14876 E : 2007 TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF WELDED STEEL PRESSURE DRUMS
UNE-EN ISO 13341:2011 Gas cylinders - Fitting of valves to gas cylinders (ISO 13341:2010)
DIN EN 14427:2014-09 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
BS EN 12252:2014 LPG equipment and accessories. Equipping of LPG road tankers
BS EN 1968:2002 Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylinders
UNE-EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS EN ISO 13341 : 2010 GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS
ISO 12209:2013 Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air
17/30362889 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
BS EN 1797:2001 Cryogenic vessels. Gas/material compatibility
I.S. EN ISO 11114-1:2012 GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1:2012)
I.S. EN 14678-1:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
EN 13953:2015 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
I.S. EN 13953:2015 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
I.S. EN 13799:2012 LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS
I.S. EN ISO 13341:2010 GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS (ISO 13341:2010)
I.S. EN 14129:2014 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
I.S. EN ISO 14113:2013 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
I.S. EN 13807:2017 TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING
DIN EN 12252:2000-10 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
I.S. EN ISO 11114-3:2010 GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 3: AUTOGENOUS IGNITION TEST FOR NON-METALLIC MATERIALS IN OXYGEN ATMOSPHERE
I.S. EN 14893:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
I.S. EN 12252:2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
I.S. EN ISO 10297:2014 GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014, CORRECTED VERSION 2014-11-01)
I.S. EN 14427:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
I.S. EN 12245:2009 TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS
UNE-EN ISO 24431:2017 Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016)
PREN 13953 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
17/30362339 DC : 0 BS ISO 16964 - GAS CYLINDERS - FLEXIBLE HOSES ASSEMBLIES - SPECIFICATION AND TESTING
10/30197274 DC : 0 BS ISO 21013-4 - CRYOGENIC VESSELS - PILOT OPERATED PRESSURE RELIEF DEVICES - PART 4: PRESSURE-RELIEF ACCESSORIES FOR CRYOGENIC SERVICE
PREN 14678-1 : DRAFT 2010 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
10/30218988 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) TANK VALVES AND FITTINGS
UNI EN ISO 10961 : 2012 GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION
16/30343643 DC : 0 BS ISO 12619-15 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 15: FILTER
17/30341479 DC : 0 BS ISO 16111 - TRANSPORTABLE GAS STORAGE DEVICES - HYDROGEN ABSORBED IN REVERSIBLE METAL HYDRIDE
14/30300117 DC : 0 BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
I.S. EN 12863:2002 TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE OF DISSOLVED ACETYLENE CYLINDERS
18/30347939 DC : DRAFT APR 2018 BS ISO 20766-6 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 6: PRESSURE RELIEF VALVES (PRV)
BS ISO 21172-1:2015 Gas cylinders. Welded steel pressure drums up to 3 000 litres capacity for the transport of gases. Design and construction Capacities up to 1 000 litres
I.S. EN ISO 14245:2010 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING
DIN EN ISO 14245:2010-11 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING
09/30205570 DC : 0 BS EN 13799 - LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LPG TANKS
BS EN ISO 15995:2010 Gas cylinders. Specifications and testing of LPG cylinder valves. Manually operated
16/30343631 DC : 0 BS ISO 12619-11 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 11: EXCESS FLOW VALVE
12/30246391 DC : DRAFT JULY 2012 BS ISO 10297 - GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING
BS ISO 12619-9:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Pressure relief valve (PRV)
17/30342725 DC : 0 BS ISO 12619-7 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLENDS FUEL SYSTEM COMPONENTS - PART 7: GAS INJECTOR
EN ISO 15245-1:2001/A1:2013 GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001/AMD 1:2013)
BS ISO 16111:2008 Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
14/30287821 DC : 0 BS EN 13807 - TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING
I.S. EN 14876:2007 TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF WELDED STEEL PRESSURE DRUMS
16/30342632 DC : 0 BS ISO 12619-10 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 10: PRESSURE RELIEF VALVE (PRD)
16/30343634 DC : 0 BS ISO 12619-12 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 12: GAS-TIGHT HOUSING AND VENTILATION HOSES
17/30359995 DC : 0 BS ISO 21266-2 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLENDS FUEL SYSTEMS - PART 2: TEST METHODS
BS ISO 21013-1:2008 Cryogenic vessels. Pressure-relief accessories for cryogenic service Reclosable pressure-relief valves
08/30195387 DC : 0 BS EN ISO 11114-3 - TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 3: AUTOGENEOUS IGNITION TEST IN OXYGEN ATMOSPHERE
BS ISO 12619-7:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Gas injector
SAE AIR 6464 : 2013 EUROCAE/SAE WG80/AE-7AFC HYDROGEN FUEL CELLS AIRCRAFT FUEL CELL SAFETY GUIDELINES
DIN EN ISO 24431 E : 2017 GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016)
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
I.S. EN ISO 17879:2017 GAS CYLINDERS - SELF-CLOSING CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17879:2017)
BS ISO 3500 : 2005 GAS CYLINDERS - SEAMLESS STEEL CO[2] CYLINDERS FOR FIXED FIRE-FIGHTING INSTALLATIONS ON SHIPS
ISO 11119-1:2012 Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
ISO 18119:2018 Gas cylinders — Seamless steel and seamless aluminium-alloy gas cylinders and tubes — Periodic inspection and testing
EN ISO 17879:2017 Gas cylinders - Self-closing cylinder valves - Specification and type testing (ISO 17879:2017)
DIN EN ISO 7396-1:2016-09 MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016)
ISO 12619-6:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 6: Automatic valve
UNI EN 14678-3 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
I.S. EN ISO 15996:2017 GAS CYLINDERS - RESIDUAL PRESSURE VALVES - SPECIFICATION AND TYPE TESTING OF CYLINDER VALVES INCORPORATING RESIDUAL PRESSURE DEVICES (ISO 15996:2017)
EN ISO 14245:2010 Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2006)
ISO 16111:2008 Transportable gas storage devices Hydrogen absorbed in reversible metal hydride
DIN EN 12863:2006-02 TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE OF DISSOLVED ACETYLENE CYLINDERS
DIN EN 1968:2005-12 TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF SEAMLESS STEEL GAS CYLINDERS
DIN EN 12245:2012-03 Transportable gas cylinders - Fully wrapped composite cylinders (includes Amendment A1:2011)
DIN EN ISO 14113:2014-02 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013)
DIN EN ISO 15245-1:2013-11 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001 + Amd 1:2013) (includes Amendment A1:2013)
DIN EN ISO 10692-2 E : 2003 GAS CYLINDERS - GAS CYLINDER VALVE CONNECTIONS FOR USE IN THE MICROELECTRONIC INDUSTRY - PART 2: SPECIFICATION AND TYPE TESTING FOR VALVE TO CYLINDER CONNECTIONS
DIN EN 13807:2016-02 (Draft) TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES AND MULTIPLE-ELEMENT GAS CONTAINERS (MEGCS) - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING
BS EN ISO 15245-1 : 2001 GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION
BS EN 1919:2000 Transportable gas cylinders. Cylinders for liquefied gases (excluding acetylene and LPG). Inspection at time of filling
UNE-EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
UNE-EN 13953:2015 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
UNE-EN 13807:2017 Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing
UNI EN 15202 : 2012 LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS
ISO 9539:2010 Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes
18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
EN ISO 11114-1:2012/A1:2017 GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1: 2012/AMD 1:2017)
I.S. EN 1802:2002 TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS
I.S. EN 1803:2002 TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF WELDED CARBON STEEL GAS CYLINDERS
DIN EN 14427 E : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
EN 1968:2002/A1:2005 TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF SEAMLESS STEEL GAS CYLINDERS
EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
EN ISO 24431:2016 Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016)
UNI EN 13799 : 2012 LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS
UNI EN ISO 14113 : 2013 GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA)
UNI EN ISO 11114-3 : 2011 GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 3: AUTOGENOUS IGNITION TEST FOR NON-METALLIC MATERIALS IN OXYGEN ATMOSPHERE
UNI EN 14893 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
UNI EN 14427 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
UNI EN 12245 : 2011 TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS
UNI EN 14129 : 2014 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
UNI EN 14678-2 : 2012 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS
UNI EN ISO 22435 : 2013 GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING
UNI EN 14678-1 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
UNI EN 12252 : 2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
ONORM EN 14427 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
UNE-EN 16509:2015 Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing
B342-15 Selection and use of UN pressure receptacles, multiple-element gas containers, and other pressure receptacles for the transport of dangerous goods, Class 2
BS ISO 15995:2006 Gas cylinders. Specification and testing of LPG cylinder valves. Manually operated
10/30218991 DC : 0 BS EN 16119 - LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR CYLINDER AND TANK VALVES - SPECIFICATION AND TESTING
ISO 14456:2015 Gas cylinders Gas properties and associated classification (FTSC) codes
BS ISO 25760 : 2009 GAS CYLINDERS - OPERATIONAL PROCEDURES FOR THE SAFE REMOVAL OF VALVES FROM GAS CYLINDERS
17/30342698 DC : DRAFT SEP 2017 BS EN ISO 10460 - GAS CYLINDERS - WELDED ALUMINIUM-ALLOY, CARBON AND STAINLESS STEEL GAS CYLINDERS - PERIODIC INSPECTION AND TESTING
BS ISO 12619-10:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Pressure relief device (PRD)
08/30190636 DC : DRAFT OCT 2008 BS ISO 10961 - GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING
DIN EN ISO 12209 E : 2013 GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013 + AMD 1:2016, CORRECTED VERSION 2017-03)
BS ISO 12619-15:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Filter
11/30204154 DC : 0 BS EN ISO 13293 - RECREATIONAL DIVING SERVICES - REQUIREMENTS FOR GAS BLENDER TRAINING PROGRAMMES
PREN 13807 : DRAFT 2014 TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING
08/30166803 DC : DRAFT FEB 2008 BS EN ISO 9539 - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES
BS EN ISO 14245:2010 Gas cylinders. Specifications and testing of LPG cylinder valves. Self-closing
12/30266928 DC : 0 BS EN 14071 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
10/30196135 DC : 0 BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
BS EN ISO 13293:2012 Recreational diving services. Requirements for gas blender training programmes
12/30230931 DC : 0 BS EN ISO 11623 - GAS CYLINDERS - COMPOSITE CONSTRUCTION - PERIODIC INSPECTION AND TESTING
BS ISO 12619-13:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Rigid fuel line in stainless steel
13/30281067 DC : 0 BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
BS EN ISO 17879:2017 Gas cylinders. Self-closing cylinder valves. Specification and type testing
DIN EN ISO 25760:2015-04 Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders (ISO 25760:2009)
BS EN ISO 12209 : 2013 GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013)
16/30343637 DC : 0 BS ISO 12619-13 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 13: RIGID FUEL LINE IN STAINLESS STEEL
13/30247203 DC : 0 BS ISO 16964 - GAS CYLINDERS - FLEXIBLE HOSES ASSEMBLIES - SPECIFICATION AND TESTING
UNE-EN 13175:2015 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
BS EN ISO 11118:2015 Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods
UNI EN 16509 : 2014 TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING
BS ISO 14245:2006 Gas cylinders. Specification and testing of LPG cylinder valves. Self-closing
UNE-EN ISO 9539:2011 Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010)
I.S. EN ISO 15245-1:2002 GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001)
UNE-EN ISO 11118:2016 Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2015)
UNI EN ISO 15995 : 2010 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
AAGSP-11 : 2017 GUIDE OF LUBRICANTS FOR USE IN OXYGEN SYSTEMS AND USE OF MATERIALS IN OXYGEN RICH ENVIRONMENTS
BS ISO 16964:2015 Gas cylinders. Flexible hoses assemblies. Specification and testing
ISO 10460:2005 Gas cylinders Welded carbon-steel gas cylinders Periodic inspection and testing
I.S. EN ISO 24431:2016 GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016)
ISO 21013-4:2012 Cryogenic vessels — Pilot operated pressure relief devices — Part 4: Pressure-relief accessories for cryogenic service
ISO 12619-12:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 12: Gas-tight housing and ventilation hoses
ISO 12619-9:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 9: Pressure relief valve (PRV)
I.S. EN ISO 10961:2012 GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010)
ISO 12619-10:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 10: Pressure relief device (PRD)
BS ISO 21013-4:2012 Cryogenic vessels. Pilot operated pressure-relief devices Pressure-relief accessories for cryogenic service
PREN ISO 11623 : DRAFT 2012 GAS CYLINDERS - COMPOSITE CONSTRUCTION - PERIODIC INSPECTION AND TESTING (ISO/DIS 11623:2012)
BS EN ISO 14456:2016 Gas cylinders. Gas properties and associated classification (FTSC) codes
DIN EN 14071:2015-08 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
ISO 12619-8:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 8: Pressure indicator
ONORM EN ISO 14245 : 2010 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING
PREN 13799 : DRAFT 2009 LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LPG TANKS
PREN 14893 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
UNE-EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016)
DIN EN ISO 12209:2013-12 GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013 + AMD 1:2016, CORRECTED VERSION 2017-03)
ISO 12619-2:2014 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 2: Performance and general test methods
ONORM EN ISO 15995 : 2010 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
ISO 11515:2013 Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing
ISO 7396-1:2016 Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum
ISO 16964:2015 Gas cylinders Flexible hoses assemblies Specification and testing
I.S. EN ISO 15995:2010 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
DIN EN 13769:2005-09 TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING
DIN EN 14513 E : 2005 TRANSPORTABLE GAS CYLINDERS - BURSTING DISC PRESSURE RELIEF DEVICES (EXCLUDING ACETYLENE GAS CYLINDERS)
DIN EN 13953:2015-05 LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
DIN EN 14129:2014-05 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
DIN EN 13799:2012-06 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS EN 14129:2014 LPG Equipment and accessories. Pressure relief valves for LPG pressure vessels
ISO 10297:2014 Gas cylinders — Cylinder valves — Specification and type testing
ISO 25760:2009 Gas cylinders Operational procedures for the safe removal of valves from gas cylinders
ISO 24431:2016 Gas cylinders Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) Inspection at time of filling
DIN EN 15202 E : 2012 LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS
UNE-EN ISO 10297:2015 Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014, Corrected version 2014-11-01)
BS EN 1920:2000 Transportable gas cylinders. Cylinders for compressed gases (excluding acetylene). Inspection at time of filling
BS EN ISO 22435 : 2007 GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING
BS EN 14427:2014 LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction
BS EN 13799:2012 LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
ISO 10692-2:2001 Gas cylinders — Gas cylinder valve connections for use in the micro-electronics industry — Part 2: Specification and type testing for valve to cylinder connections
UNE-EN ISO 14113:2013 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
UNE-EN ISO 12209:2014 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air (ISO 12209:2013)
BS EN ISO 11114-1 : 2012 GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS (ISO 11114-1:2012)
ISO 14113:2013 Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
ISO 11118:2015 Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods
BS EN 14876:2007 Transportable gas cylinders. Periodic inspection and testing of welded steel pressure drums
UNE-EN 14427:2014 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
ISO 15245-1:2001 Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification
BS EN ISO 10692-2:2001 Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry Specification and type testing for valve to cylinder connections
ISO 11114-1:2012 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials
UNE-EN 12245:2009 Transportable gas cylinders - Fully wrapped composite cylinders
UNE-EN 15202:2012 LPG equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
BS EN 13769:2003 Transportable gas cylinders. Cylinder bundles. Design, manufacture, identification and testing
BS EN 13953:2015 LPG equipment and accessories. Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
BS EN ISO 10297 : 2014 GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING
09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
BS EN 14513:2005 Transportable gas cylinders. Bursting disc pressure relief devices (excluding acetylene gas cylinders)
EN ISO 11118 : 2015 COR 2015 GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015)
ISO 13293:2012 Recreational diving services — Requirements for gas blender training programmes
BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications
ISO 22435:2007 Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing
ISO 10961:2010 Gas cylinders Cylinder bundles Design, manufacture, testing and inspection
BS EN 1802:2002 Transportable gas cylinders. Periodic inspection and testing of seamless aluminium alloy gas cylinders
BS EN 1803:2002 Transportable gas cylinders. Periodic inspection and testing of welded carbon steel gas cylinders
DIN EN 13769:2003-12 TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING
EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
EN 1803:2002 Transportable gas cylinders - Periodic inspection and testing of welded carbon steel gas cylinders
EN 14427:2014 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
EN ISO 22435:2007/A1:2012 GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING (ISO 22435:2007/AMD 1:2012)
EN ISO 9539:2010/A1:2013 GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010/AMD 1:2013)
EN ISO 13293:2012 Recreational diving services - Requirements for gas blender training programmes (ISO 13293:2012)
EN 16509:2014 Transportable gas cylinders - Non-refillable, small transportable, steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases (compact cylinders) - Design, construction, filling and testing
EN ISO 10297:2014/A1:2017 GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014/AMD 1:2017)
ONORM EN 16119 : 2013 LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING
EN ISO 11114-3:2010 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010)
EN 14678-2:2007+A1:2012 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements
EN 14129:2014 LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels
EN 1802:2002 Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders
EN 1797:2001 Cryogenic vessels - Gas/material compatibility
EN 14876:2007 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
EN 14513:2005 Transportable gas cylinders - Bursting disc pressure relief devices (excluding acetylene gas cylinders)
EN ISO 10692-2:2001 Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001)
EN ISO 14456:2016 Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015)
EN 12245:2009+A1:2011 Transportable gas cylinders - Fully wrapped composite cylinders
EN 14678-3:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
EN 13769:2003/A1:2005 TRANSPORTABLE GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING
EN ISO 11623:2015 Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02)
EN ISO 25760:2015 Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders (ISO 25760:2009)
EN 14208:2004 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
EN ISO 14113:2013 Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013)
EN 13807:2017 Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing
AEP-42 : 2006 GUIDE TO USE OF MATERIALS IN OXYGEN-ENRICHED ENVIRONMENTS
04/30107772 DC : DRAFT JAN 2004 PREN 14876 - TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF WELDED STEEL PRESSURE DRUMS
PREN 12252 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
ISO 12619-7:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 7: Gas injector
UNE-EN ISO 14456:2017 Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015)
UNE-EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
09/30198861 DC : 0 BS EN ISO 11114-1 - TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS
UNI EN ISO 14245 : 2010 GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - SELF-CLOSING
12/30241747 DC : 0 BS EN ISO 12209 - GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR
DIN EN ISO 9539:2014-04 GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010 + AMD.1:2013)
16/30343640 DC : 0 BS ISO 12619-14 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 14: FLEXIBLE FUEL LINE
04/30118084 DC : DRAFT AUG 2004 ISO 21011 - CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE
10/30218994 DC : 0 BS EN 15202 - LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS
DIN EN ISO 10961:2012-06 GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010)
04/19971669 DC : DRAFT APR 2004 BS ISO 14245 - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) CYLINDER VALVES - SELF CLOSING
UNE-EN ISO 25760:2015 Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders (ISO 25760:2009)
BS EN 16119:2013 LPG equipment and accessories. Sealing caps and plugs for LPG cylinder and pressure vessel valves. Specification and testing
13/30264471 DC : 0 BS ISO 21172-1 - GAS CYLINDERS - WELDED STEEL PRESSURE DRUMS UP TO 3000 LITRES CAPACITY FOR THE TRANSPORT OF GASES - DESIGN AND CONSTRUCTION - PART 1: CAPACITIES UP TO 1000 LITRES
18/30321883 DC : 0 BS EN ISO 15995 - GAS CYLINDERS - SPECIFICATIONS AND TESTING OF LPG CYLINDER VALVES - MANUALLY OPERATED
07/30148170 DC : 0 BS ISO 16111 - TRANSPORTABLE GAS STORAGE DEVICES - HYDROGEN ABSORBED IN REVERSIBLE METAL HYDRIDE
11/30229997 DC : 0 BS EN 14427 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
I.S. EN ISO 12209:2013 GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013)
BS ISO 14456 : 2015 GAS CYLINDERS - GAS PROPERTIES AND ASSOCIATED CLASSIFICATION (FTSC) CODES
DIN EN 16509 E : 2014 TRANSPORTABLE GAS CYLINDERS - NON-REFILLABLE, SMALL TRANSPORTABLE, STEEL CYLINDERS OF CAPACITIES UP TO AND INCLUDING 120 ML CONTAINING COMPRESSED OR LIQUEFIED GASES (COMPACT CYLINDERS) - DESIGN, CONSTRUCTION, FILLING AND TESTING
ISO 10461:2005 Gas cylinders Seamless aluminium-alloy gas cylinders Periodic inspection and testing
UNE-EN 14678-3:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
DIN EN ISO 25760 E : 2015 GAS CYLINDERS - OPERATIONAL PROCEDURES FOR THE SAFE REMOVAL OF VALVES FROM GAS CYLINDERS (ISO 25760:2009)
16/30339669 DC : 0 BS ISO 21010 - CRYOGENIC VESSELS - GAS/MATERIALS COMPATIBILITY
BS ISO 11515 : 2013 GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
05/30131633 DC : DRAFT APR 2005 ISO 22435 - GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATOR - SPECIFICATION AND TYPE TESTING
UNI EN ISO 13293 : 2013 RECREATIONAL DIVING SERVICES - REQUIREMENTS FOR GAS BLENDER TRAINING PROGRAMMES
ISO 3500:2005 Gas cylinders Seamless steel CO2 cylinders for fixed fire-fighting installations on ships
ISO 15995:2006 Gas cylinders Specifications and testing of LPG cylinder valves Manually operated
I.S. EN ISO 13293:2012 RECREATIONAL DIVING SERVICES - REQUIREMENTS FOR GAS BLENDER TRAINING PROGRAMMES (ISO 13293:2012)
I.S. EN ISO 14456:2016 GAS CYLINDERS - GAS PROPERTIES AND ASSOCIATED CLASSIFICATION (FTSC) CODES (ISO 14456:2015)
ISO 11622:2005 Gas cylinders Conditions for filling gas cylinders
ISO 12619-15:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 15: Filter
DIN EN 13175:2015-02 LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS
ISO 12619-14:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 14: Flexible fuel line
ISO 15996:2017 Gas cylinders — Residual pressure valves — Specification and type testing of cylinder valves incorporating residual pressure devices
DIN EN ISO 24431:2015-08 (Draft) GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016)
EN ISO 15996:2017 Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices (ISO 15996:2017)
DIN EN 14678-1:2013-06 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
DIN EN ISO 11114-3:2011-04 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010)
DIN EN ISO 13341:2015-11 GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS (ISO 13341:2010 + AMD 1:2015)
UNE-EN ISO 11114-3:2011 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010)
BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
UNE-EN ISO 11623:2016 Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02)
ISO 11114-3:2010 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
BS EN 14678-1:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers
BS EN 14893:2014 LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
BS EN ISO 14113:2013 Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
ISO 11623:2015 Gas cylinders — Composite construction — Periodic inspection and testing
DIN EN 15202:2012-09 LPG EQUIPMENT AND ACCESSORIES - ESSENTIAL OPERATIONAL DIMENSIONS FOR LPG CYLINDER VALVE OUTLET AND ASSOCIATED EQUIPMENT CONNECTIONS
EN 12252:2014 LPG equipment and accessories - Equipping of LPG road tankers
EN 13760:2003 Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions
UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
DIN EN 14876:2007-04 Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums
DIN EN 13807:2017-05 TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES AND MULTIPLE-ELEMENT GAS CONTAINERS (MEGCS) - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING
EN 16119:2013 LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing
EN ISO 12209 : 2013 AMD 1/COR 17 GAS CYLINDERS - OUTLET CONNECTIONS FOR GAS CYLINDER VALVES FOR COMPRESSED BREATHABLE AIR (ISO 12209:2013/AMD 1:2016, CORRECTED VERSION 2017-03)
DIN EN 14513:2005-06 Transportable gas cylinders - Bursting disc pressure relief devices (excluding acetylene gas cylinders)

AS 2337.3:2020 Gas cylinder test stations Transportable gas cylinders - Periodic inspection and testing of composite cylinders (ISO 11623:2015, MOD)
ISO 9539:2010 Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes
ISO 11114-1:2012 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials
ISO 15001:2010 Anaesthetic and respiratory equipment Compatibility with oxygen
SA TS 19883:2020 Safety of pressure swing adsorption systems for hydrogen separation and purification (ISO/TS 19883:2017, MOD)
ISO 11114-3:2010 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere
ISO 10297:2014 Gas cylinders — Cylinder valves — Specification and type testing
ISO 10156:2017 Gas cylinders — Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids

View more information
$118.72
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more